Unable to see files in "Export Request Attachments " for other users

Hi,
I am trying to see the files that the users have exported.
Navigation:: Admin -->Import and Export Tools -->Export Request Queue.
and then trying to view the files.
I am getting an error as "Access denied.(SBL-DAT-00553)".
thanks

Debendra, you will see this error for both export and import request attachments if you are not the owner. This is currently being evaluated and a patch may be coming to change this behavior.

Similar Messages

Unable to see files in iTunes File Sharing

I'm using the latest version of iTunes, and have both an iPad and iPad2, both fully upto date with the latest version of IOS. Everything I now write about applies to both iPads.
Basically, I'm unable to see files that are sent to iTunes from the iPad. The ipad is connected to the PC, I select the file I want to send from the appropriate app, and then "send to iTunes". The file never appears under the app that sent if from the file sharing section of the device in iTunes. Even forcing another sync doesn't help either.
Here's the strange thing, if I unplug the iPad, then reconnect it, go back to file sharing page in iTunes, and click on the appropriate app, the files show. However, if I click onto another app in the file sharing list and back to the original one, the files have disappeared.
By way of example:
I connect my iPad to iTunes, after it automatically syncs, I select the iPad, choose the apps menu and scroll down to the file sharing window.
On my iPad, I open Pages, select a document and send it to iTunes.
Back on my PC, the file doesn't show under the Pages app in the file sharing window.
I resync the iPad, still no change.
I disconnect the iPad, reconnect and let it automatically sync again.
I navigate back to the file sharing section and click on the Pages app. Low and behold, the file is now showing.
I click onto any other app that is listed in the file sharing section, then click back to the Pages app. The file no longer shows.
It will remain like that until I unplug the ipad, and connect/sync again.
Exactly the same thing will happen regardless of which app I choose that supports file sending to iTunes.
Finally, just to confuse matters further, the reverse is also true. Adding a file to the file sharing section doesn't appear in the list, and the iPad can't see it - until I unplug and reconnect again. After that, same issues happen as already described.
Any assistance would be appreciated.

This is a bug in the Windows version of iTunes which I reported to Apple nearly a year ago (back when iTunes 10 came out), but they refuse to fix. I see the problem with my iPhone 3GS and iPad 2.
Basically file sharing stops working if you click on more than two or three apps in the file sharing list. The work around is to disconnect the iOS device and reconnect it. Then make sure to click only the app you want to transfer to/from. If the document list goes blank, disconnect and reconnect again.
It's really annoying and I wish Apple would fix it. Supposedly it was also broken for the Mac version of iTunes and was quickly fixed there, but not for Windows.

3 user profiles on mac book pro. cant see one account in time machine - has it backed up? and for other users ''no permission'' to open folders - i just want to know that stuff IS backed up (before attempting upgrade to lion)

We have 3 user profiles on mac book pro. want to upgrade to lion but want to be sure that all users are backed up to ext hard drive via Time Machine. When I go into Time Machine - I cant find anywhere my user account (1 of the 3) - loads of photos and documents. For other user accounts - if i go to open a folder i cant ''no permission'' is the message. All I want to be sure of is that there is a back up and for these 2 reasons I am far from sure.

famfran wrote:
When I go into Time Machine - I cant find anywhere my user account (1 of the 3) - loads of photos and documents.
Be sure they're not excluded in Time Machine Preferences > Options.
Also, if iPhoto is open while a backup is running, Time Machine may not be able to back up the changes in the iPhoto Library. It will "catch up" the next time, if it can.
For other user accounts - if i go to open a folder i cant ''no permission'' is the message. All I want to be sure of is that there is a back up and for these 2 reasons I am far from sure.
That's correct; one user, even an Admin user, doesn't normally have access to another user's files. You should see the same behavior if you try to look at their data on your Mac.
Log on as the other users (or have them do it) to see their backups.

Unable to see files or write to external SD card since 4.3 upgrade

HI. I have an external SD card plugged in to my SIII.
It's been working great for months.
A week or so ago, an upgrade was pushed down to my phone, 4.3 to be exact.
Since then I can't see files on my external SD card.
If I plug a cable into my computer and browse to my phone's external card I can see them on my PC.
I've searched around and backed up my files, unmounted, reboot, remount. Reformat the card, unmount & remount.
No change.
I've formatted the SDcard on a PC and no difference.
Is anyone else experiencing this?
The card is a SanDisk Ultra 64gb microSD card, but it really isn't card specific.
I put my older 16gb card that I used to use and it can't read any files on there either.
The phone DOES see the card and cant report free space, it just can't do anything with it since the last update.
What can I do?
Thanks,
David

After I formatted the card I can copy files via the PC & cable, but they don't show up when viewing from the phone.
If I use an app like Astro File manager (which did show the files correctly, prior to the 4.3 update), it shows the word "empty" for truly empty folders but it just shows a blank empty folder for folders that have a file that I copied in via the PC & cable.
If I try to make a folder in Astro, it looks like I did, but it doesn't show in Astro.
If I look from my PC, it shows the folder that I created on the phone via Astro.
Once again, everything was working great up until the pushed 4.3 update.
The Old card does show up fine on other phones.
I haven't tried the 64gb card on another phone yet, but the card isn't the issue.
As I copy over files to the card via the PC and cable, the phone does reflect the data used/free space correctly.
I see a similar issue someone is having on an S4, but the thread is locked:
https://community.verizonwireless.com/message/1016871
Still wondering what I can do. Can I downgrade my S3 OS? to 4.1/4.2?

Unable to see the application in BPM Workspace for Sales Quote tutorial

I have created the Sales Quote tutorial steps and deployed the process. The Enter Quote Details user task is in the "SalesRep" role and I have assigned a user from WebLogic user store to "SalesRep" role in the BPM Organization artifact.
In order to kick off the process, I logged-in to BPM workspace with the user I have assigned as "SalesRep" role but don't find the Sales Quote application under the "Applications" tab.
I am using 11g PS4(11.1.1.5) and didn't seed the demo users, instead just created the user using WLS console.
Any thoughts why the user is unable to see the application in BPM Workspace?
Thanks,
Satya

Check two things:
1. Login to Workspace as weblogic and click the Administration link at the top to verify the role is actually set to a user (just to double check this).
2. Login to EM, click the SalesQuote composite, scroll down and click the EnterQuote human task component, and click the Administration tab.
This shows you if there is a task form URI associated with this human task. If not, the initiate link won't show up in the Applications menu in Workspace.
If not, you can either deploy again from JDeveloper, making sure you have selected the task forms in the deploy wizard and making sure the deployment is successful in the Deployments log window.
Heidi.

Been unable to sync files (use) creatice cloud connect for three (3) days

So what gives. Everything work find on Saturday 11 May 2013 but now I have been unable to sync files with Creative Cloud

Creative Cloud file sync services are currently unavailable. We're working to restore service as soon as possible. To disable error alerts you can Turn Sync Off or Quit Creative Cloud Connection.
You can check the current status of Creative Cloud at http://status.creativecloud.com.
Agreed that the status page could be more clear.
The Adobe Creative Cloud has may pieces:
Subscription to plans from https://creative.adobe.com/plans is working normally.
Installing desktop applications from https://creative.adobe.com/apps and the Adobe Application Manager are working normally.
Other services you can access from the Creative Cloud such as Story and Typekit are working normally.
Viewing training and learning videos from the Learn link is working normally.
Uploading, downloading and working with your files from the web service at https://creative.adobe.com/files is working normally.

Unable to see logs while using split tunnel for RA

hi everyone,
I have config RA VPN at my home lab using split tunnel.
I can connect fine and able to browse the internet.
When i go to internet sites i do not see logs generated on the VPN ASA?
Need to understand whats the reason behind this?
ASA1# sh conn all
5 in use, 12 most used
UDP outside 10.0.0.51:138 inside 10.0.0.255:138, idle 0:01:38, bytes 201, flags -
TCP outside 192.168.98.2:49509 NP Identity Ifc 192.168.1.171:443, idle 0:00:07, bytes 1067370, flags UOB
TCP outside 192.168.98.2:49507 NP Identity Ifc 192.168.1.171:443, idle 0:00:03, bytes 137779, flags UOB
UDP outside 192.168.98.2:49903 NP Identity Ifc 192.168.1.171:500, idle 0:00:01, bytes 40927, flags -
TCP outside 192.168.99.2:35902 NP Identity Ifc 192.168.1.171:22, idle 0:00:00, bytes 179887, flags UOB
Where 192.168.98.2 is IP of PC.
10.0.0.51 is IP assigned from VPN pool to PC.
Regards
Mahesh

Hi Mahesh,
You are using Split Tunnel VPN. This means that you have configured the VPN Client connection to only tunnel specific networks through the VPN Connection while its active. You have probably configured an ACL that contains your LAN network behind the ASA.
This means that only traffic destined to that LAN network mentioned in the ACL reaches your ASA through the VPN Connection.
The Internet traffic of the user or any traffic that is NOT destined to that network in the ACL will simply use the VPN Client users PCs local Internet connection or local network.
This is the reason you are not seeing any of the Internet connections from the VPN Client on the ASA. The VPN Client connection is only configured to forward traffic to the LAN network and pass all other traffic past the VPN Connection through the users local network connection.
If you were to configure Full Tunnel VPN for the user this would mean that ALL traffic would be forwarded from the VPN Client through the ASA and the ASA would control where that traffic would be forwarded and if that traffic would be allowed.
If you want to look at the current configuration on the CLI you would first have to issue
show run tunnel-group
And find the connection that you are using at the moment. Then you would have to check what "group-policy" is configured under that "tunnel-group"
Then you could issue the command
show run group-policy
This would list you the Group Policy configuration for the VPN connection and would show something like this under it
split-tunnel-policy tunnelspecified
split-tunnel-network-list value
The above configuration would show you the ACL that the VPN Client configuration is using to tell the VPN Client what traffic to send through the VPN Connection.
Hope this helps
- Jouni

Users are not able to query request submitted by other user .

users are not able to query request submitted by some other user using the same responsibility .
applications ver . 12.1.2

I have just upgraded 11.5.10 to 12.1.3. I have followed doc ID 804296.1 so users can see out files within the same responsibility. But users still cannot see out files from other users. I really believe I have followed the doc completely. Any advice?
SQL> select bug_number from ad_bugs where bug_number like '8671003';
BUG_NUMBER
8671003
Also these are the steps I took per the doc:
sysadmin >Functional Developer >Security > Objects
Search on Database Object = FND_CONCURRENT_REQUESTS
Click on Concurrent Requests.
Click on Object Instance Sets tab.
Click on Create Instance Set button.
Name=Allow user to view other requests within same responsibility
Code=XXFND_CONC_REQUESTS_01
Description=Allow user to view other requests within same responsibility
Predicate=
&TABLE_ALIAS.request_id in (select cr.request_id from fnd_concurrent_requests cr where
cr.responsibility_id = fnd_global.resp_id and cr.responsibility_application_id =
fnd_global.resp_appl_id)
Sysadmin >User Management >Roles and Role Inheritance
Click Create Role button
Catagory=Miscellaneous
Role Code=UMX|XX_VIEW_OUTPUT
Display Name=View Output For Same Responsibility
Description=View Output For Same Responsibility
Click Create Grant and "Save and Continue'
Name=XX_VIEW_OUT
Description=View output of other users in same resposibility
Object=Concurrent Requests
Click Next
Data Content Type “Instance Set”
Instance Set=Allow user to view other requests within same responsibility
Click Next
At the bottom
Set=Request Operations
Click Next> Finish
Edited by: 893303 on Oct 26, 2011 6:53 AM

The account application created using can see current Blank Site page but no other user account see current page only some old page?

Hello Community
    Using Sharepoint 2010 Server and the UI, building an intranet
starting with a Blank Site and then adding subsites can be accomplished.
    However, in this case the current Blank Site page that was created only shows
when logged in using the account that the application was created under.
    Any other account used to login with when the url is typed into the
address bar does not show the current Blank Site page.
   Instead when using any other account the page that is returned is
some page that was created early in in the creation of the site.
    A Blank site is said to be:
        "A blank site for you to customize based on your requirements."
    I checked-in the v4.master and approved it but the problem still exists.
    Then I checked the Site Collection features under Site Collection
Administration "Active" contains:
    Sharepoint Server Publishing Infrastucture
    Sharepoint Server Standard Site Collection features
    Then I checked under Site Actions has Manage Site features "Active"
contains:
    Sharepoint Server Publishing
    Sharepoint server Standard Site features
    It is said that maybe the page needs to be "Published". Basically
this is a Blank Site page so when the instructions says:
   "To publish a page, on the page that you are editing, on the
Page Editing toolbar, click Publish."
    I am unable to do it because when I:
       "Edit Page"
    There is not no option on the ribbon to choose "Publish".
    Neither did I see the "Publish"option when editing the v4.master in SPD.
    In summary, when logged in with the account that everything was created
under I can see the current Blank Site with the Lists and everthing else
on the page but how come when I login with any other user account
I don't see the current Blank Site page but instead see some old page that
I may have created earlier when creating the application?
    Thank you
    Shabeaut

Hello Community
    I think it is worth mentioning that the Top Link Bar shows what appears
on the current Blank Site page but it is the OOTB NoteBoard and Discussion Board
List which both reside in Left web part on the Blank Site page that has been replaced
on the page by what had been in an old Content Editor web part during early creation.
    How can I grant permissions to the OOTB NoteBoard and the Discussion Board List
that would allow other user accounts to see them, thus making the entire current Blank Site page
visible other user accounts?
    Thank you
    Shabeaut

Files added to server take time to show for other users

Various users add files to server and other users with folder access cannot see files for sometimes up to 2 hours before the files appear. It is not a rights issues as when the file final appear in the directory they can access the file and use.

I saw this at a client's setup. Upgrading the client computer to 10.10.2 resolved this issue.
Bryan Dulock
ACN
Houston, TX

Missing attachments for some users in Outlook 2010

Hi,
We have a single Exchange 2010 (sp3 rollups 2 and 4 installed) with clients on Outlook 2010.
4 users received an email from outside the domain with 12 attachments (8 PDF, 4 excel and word). Email content type is multipart/mixed.
One user can see all 12 attachments in outlook while the other 3 can only see the 8 PDF's. All users can see all attachments in OWA. Email size limits and attachment limits dont seem to be the cause.
I've had a look in the forums and I cant see anything related to our exact issue (affecting some but not all users, content type seems ok).
Looks to me like I should start with a pipeline trace, but does anyone have any other suggestions?
Cheers,
Scott

Hi,
To understand more about the issue, I’d like to ask the following questions:
Does the problematic users can view other Excel and Word attachments? Try to send another email with single excel and word attachment to have a test.
Are the problematic attachment visible if you forward the email to other users through Outlook?
Additionally, pipeline tracing log is recommended to troubleshoot the issue and find the root cause.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

SMB file sharing cannot be modified for migrated users

After upgrading my existing Snow Leopard installation there is no way to modify the filesharing options anymore for migrated users.
Creating a new user and setting the smb filesharing option is no problem.
As soon as I try to disable/enable filesharing for a migrated user account it either ignores the request completely after asking for a password or it asks for a password an responds with incorrect password (which is identical to the login).
So in one way or the other there is some left over from the previous smb implementation which is not understood anymore.
Does anyone know where to look for more specific information regarding the new smb implementation ? Or has a solution for this.
I have been searching and looking around via a terminal but haven't found anything yet.

This post was a solution and not a question. I hope it helps someone.

Unable to see files in Google docs

Just set up my OJ6500A+ on wireless network to take adv. of apps like Googledocs. I had a prob. getting printer & Googledocs to talk to ea. other. Printer kept acting like pswd was bad. I fixed that, and got GoogleDocs to open. I uploaded docs. to GoogleDocs but printer thinks folder is empty. Am I doing something wrong or is there yet another setting somewhere that needs to be changed?

Hi ldm1701,
I think you are using a standard account for google docs.
The file type supported for standard account are :-
- Google Presentation
- PDF (.pdf)
- Google Document
You would need to check this option "Convert documents, presentations, spreadsheets, and drawings to the corresponding Google Docs formats" when you upload documents.
Perhaps you can try to upload the docs and convert it to Google Docs format and see if the printer is able to files?
Thank you.
I am an HP employee
**** Please mark the post that solves your problem as "Accepted Solution" ****

Unable to see files

I'm running 10.5.6 and backing up on a Western Digital 620GB external hard drive. When I check to see that it is in fact working as it should I find 2 folders for each date: a Macintosh HD folder and one with my user name on it. That's where all my files should be, but nothing is there. What am I doing wrong? So far, I'm thinking that Time Machine is a big waste of money.

The folder on the external drive should be named Backups.backupdb, not Time Machine Backups. Inside that should be a folder with your user name and inside that, folders of each incremental backup it has done.
The starry abyss screen should be accessed by selecting Enter Time Machine from the menu on the top right that is a clock with a counter-clockwise arrow icon. What happens when you Enter Time Machine? What is on your external drive? Is there a folder named Backups.backupdb?

Unable to see file system on touchpad over USB from Windows 7

When I plug in my HP touchpad running 3.0.4 via USB to my PC running Windows 7 the device appears in device manager, but I don't see a new drive appear with a given drive letter under my computer.
If I look at device manager in windows, I see two webos devices. One is under disks. The other is an unknown device with a question mark next to it.
If I look at the disk from the disk management interface, the disk appears, but doesn't seem to have a drive letter nor a filesystem on it.
If I plug the touchpad into an XP box, it wants to format the drive... which loses my apps.
What did I break? Any way of fixing this?
Thanks!
-- gyre ---
Post relates to: HP TouchPad (WiFi)

Before you disconnect the cord from the PC, are you correctly choosing "Eject", or the incorrect "Safely Remove Hardware" from the tool tray?
I've heard the latter can cause confusion on a PC...
Wyrenut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Unable to see files in "Export Request Attachments " for other users

Similar Messages

Maybe you are looking for