Unable to see report footer

I am using forms and reports 6i. In the application (web enabled),in a few reports, one report footer is printed. however, in the report builder, this report footer is not visible. I want to change the footer. How to do this? Pl. help.
Thanks

Perhaps I was not clear in my original help message. When the report is run from within report builder, there is no footer in the report. However, when the same is run from the application, one footer is printed. How to change this footer is the problem.

Similar Messages

Unable to see report

Hi
I had one strange issue.Willbe greatful for some inputs.
User is using one report.He sees report in .NET application which fetches data from BW.The report is based on one BW query.
In BW query,we are using one characteristic SALES_ORG which has hierarchy SALES_HIER_2000 activated on it.User belongs to node 5000 in this hierarchy.We have a hierarchy node variable on this characteristic in Global filter area.This variable has a default value of 100 which is higher level node in SALES_HIER_2000 hierarchy.so when ever query is run,the variable is input with this top level node.But I think our user roles are built in a way,that users can see only their hierarchy nodes data.In our users case,he can see only 5000 hierarchy node data to which he belongs.
Then the hierarchy is changed to SALES_HIER_3000.My user now belongs to hierarchy node 8000 in this new hierarchy.So this new node 8000 is included in his role so he can continue seeing reports.Just to make a point here,this 8000 node also comes under higher level node 100 in new hierarchy as in old hierarchy.But the problem is,he is unable to see reports.
I noticed that in our query we are still using same hierarchy node variable.Do I need to create one new hierarchy node variable as we are using new hierarchy eventhough both old and new hierarchies are on same characteristic SALES_ORG.
Also,I noticed that in this old variable which we are still using,we have default value 100 from old hierarchy.Do I need to change this default value eventhough in new hierarchy also,100 is the higher node to which new user's node 8000 belongs to?..........
what can be the reason that my user is unable to see reports?Please advise.
Best Rgds.

Perhaps I was not clear in my original help message. When the report is run from within report builder, there is no footer in the report. However, when the same is run from the application, one footer is printed. How to change this footer is the problem.

Unable to see report in pdf format in BI Publisher 10.1.3.2

Hi
I am new to BIP and I am facing problem to display pdf format in BI Publisher 10.1.3.2.
Here is my my generated by 10g Report Developer.
<?xml version="1.0" encoding="WINDOWS-1256"?>

<NEHAS_GA>
<LIST_G_2>
<G_2>
<DNAME>ACCOUNTING</DNAME>
<LOC>NEW YORK</LOC>
<LIST_G_1>
<G_1>
<NAME>CLARK</NAME>
<JOB>MANAGER</JOB>
<HIREDATE>09/06/81</HIREDATE>
<SALARY>2450</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>KING</NAME>
<JOB>PRESIDENT</JOB>
<HIREDATE>17/11/81</HIREDATE>
<SALARY>5000</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>MILLER</NAME>
<JOB>CLERK</JOB>
<HIREDATE>23/01/82</HIREDATE>
<SALARY>1300</SALARY>
<COMM></COMM>
</G_1>
</LIST_G_1>
</G_2>
<G_2>
<DNAME>RESEARCH</DNAME>
<LOC>DALLAS</LOC>
<LIST_G_1>
<G_1>
<NAME>JONES</NAME>
<JOB>MANAGER</JOB>
<HIREDATE>02/04/81</HIREDATE>
<SALARY>2975</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>FORD</NAME>
<JOB>ANALYST</JOB>
<HIREDATE>03/12/81</HIREDATE>
<SALARY>3000</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>ADAMS</NAME>
<JOB>CLERK</JOB>
<HIREDATE>12/01/83</HIREDATE>
<SALARY>1100</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>SMITH</NAME>
<JOB>CLERK</JOB>
<HIREDATE>17/12/80</HIREDATE>
<SALARY>800</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>SCOTT</NAME>
<JOB>ANALYST</JOB>
<HIREDATE>09/12/82</HIREDATE>
<SALARY>3000</SALARY>
<COMM></COMM>
</G_1>
</LIST_G_1>
</G_2>
<G_2>
<DNAME>SALES</DNAME>
<LOC>CHICAGO</LOC>
<LIST_G_1>
<G_1>
<NAME>WARD</NAME>
<JOB>SALESMAN</JOB>
<HIREDATE>22/02/81</HIREDATE>
<SALARY>1250</SALARY>
<COMM>500</COMM>
</G_1>
<G_1>
<NAME>TURNER</NAME>
<JOB>SALESMAN</JOB>
<HIREDATE>08/09/81</HIREDATE>
<SALARY>1500</SALARY>
<COMM>0</COMM>
</G_1>
<G_1>
<NAME>ALLEN</NAME>
<JOB>SALESMAN</JOB>
<HIREDATE>20/02/81</HIREDATE>
<SALARY>1600</SALARY>
<COMM>300</COMM>
</G_1>
<G_1>
<NAME>JAMES</NAME>
<JOB>CLERK</JOB>
<HIREDATE>03/12/81</HIREDATE>
<SALARY>950</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>BLAKE</NAME>
<JOB>MANAGER</JOB>
<HIREDATE>01/05/81</HIREDATE>
<SALARY>2850</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>MARTIN</NAME>
<JOB>SALESMAN</JOB>
<HIREDATE>28/09/81</HIREDATE>
<SALARY>1250</SALARY>
<COMM>1400</COMM>
</G_1>
</LIST_G_1>
</G_2>
</LIST_G_2>
</NEHAS_GA>
Please see nehas_ga.rtf, kindly provide the solution which I have been working since last week and still unable to get solution.
for-each G_2
DNAME
LOC
Name Job Hiredate Salary Comm
for-each G_1 NAME
JOB
HIREDATE
SALARY
COMM end G_1
end G_2
I want each department should print on seperate page but no page to display in BI Publisher. In MS Word showing 3 page using with nehas_ga.rtf.
I would appreciate if anyone reply me.
Thanks and Regards
Muhammad Nehas

Hi
Even if i use a new clean blank rtf doc as the template, it still doesnt write out a file.
When i look in the log directory at the .out files produced, they look right. If i open the .out file with Adobe Reader 9.1, the doc looks exactly as it should. It just doesn't write the file to the destination folder specified.
It cannot be permissions as it will write out RTF/excel files to the same directory with no problems. The report is using a bursting definition but the problem cant be that because it bursts the data correctly, as shown if i specify rtf output in the bursting definition/as shown by the .out files when i specify pdf as the output in the bursting definition. Also, i get the same result even if i schedule any other report that does not use a bursting definition.
I do get an error sometimes when i try to open pdf reports : Cannot use Adobe Reader to view PDF in your web browser. I feel somehow that this may be related and that if i fix this, i could be sorted, but im not even sure im on the right track here.
Im really really REALLY at wits' end here, ive been trying to solve for weeks, but just cant figure it out. Any further ideas would be most welcome, thanks.

In BEx analyzer, i am unable to see report's name

Hi,
While using BEx Analyzer, i have 2 users. If i am logging into one user it is showing me the properties as Charts, Filter and Report name. But from other user i am not getting anything. Can anyone help me so that i will be able to see the properties as well as Report name in my another user as well.
Roma

Simple First user have have required authorization and Roles to see the report.
Where second User not have required authorization and Roles to see the report.
So discuss with your System Manager in case to provide necessory Authorization and Roles to Second User , If say yes Then escalate this issue to BASIS team.
Regards,
Sushant

In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton

Unable to see fields of BI Publisher report in MS Office

Hi,
We have a report in BIPublisher(10g). We are designing a template for a report. So from MSOffice, while we are accessing the report, we are unable to see the fields. We were able to see only RowSet. The report is working or able to see in BIPublisher.
This happens very often to us. We will be able to see the fields for some of the reports and unable to see for some reports. I can say we are able to see all the reports in BIPublisher.
Initially we are working in the sytem with 1GB RAM and thought that MSOffice is unable to load the report. Now we are working from a system with 2GB RAM, still same problem.
We did: Open MSWord-->Login to BIPublisher--> Open the folder-->Select the report.then--Insert field.
In the popup window opened, we were able to see only RowSet no fields.
We observed this is happening to the reports which have parameters to be passed
where could be the problem...help us.
Thanks
글 수정: RAJ

Have a look at getXMLdata and downloadXMLdata of schedule service , using these you can get the xml data produced by the report job
getDocumentData and downloadDocumentData will return the document data which is basically a translation of xml data in your output format

Unable to see the csv option while scheduling the report

I'm using BO XI 3.1. While i'm trying to make a schedule of a report, i am unable to see the csv export option. Is there a way to enable in the csv option?
Build version : 12.1.0.882
Edited by: mhsrinivasan on Mar 10, 2011 2:36 AM Added the version details

Scheduling the reports in CSV formate is possible in BO XIr3.1.
I would suggest you to contact to your BO Admin to check weather you have proper rights or not, in CMC scheduling part.

Unable to see substituion variable in the reporting studio

Hi,
I have added substitution variable to the reporting studio the variable name I gave as var1
and value as 2009,but I am unable to see the substitution variables in my reporting studio.
What can be the reason for it?
Thanks

Hello,
you have to quote the value because it doesnt start with a letter.
Every Value which you had to put in quotes in an Calc Script or Member Formula or so, you have to quote in FR Studio too. Planning accepts the value without quotes, FR Studio doesnt.
Bye
Kevin

Flash 11.7.700.202 - reports of unable to see video

We run a social video site and have had many reports of users unable to see video in the last few days. Our code has not changed and we believe this is due to the 11.7.700.202 release as these problems were not previously reported.
Symptoms:
User is subscribing via rtmfp to a live stream on an Adobe FMS. When this happens, we don't know if they fail to connect or the connect succeeds and they don't see video. We use an inhouse flash app. The feed is available on the FMS since other users are successfully subscribing to the same feed.
This happens to a small percent of users but that leads to many reports across our user base.
Refreshing the page, which reinstantiates the flash app, removes the problem.
Is anyone else seeing problems with viewing video from the newly updated flash player?
Thank you,
Robert

We found the problem and it is on our side, not a problem with the flash upgrade. I'll write what happened here in case it can help anyone else.
On Sunday night, two days after this post, one of our FMSs stopped accepting RTMFP publishes. When we examined the box we found that it was reporting that it had reached its max licensed RTMFP connections. We know there weren't that number of connections on there and suspect that connections leaked. After restarting the box, the FMS resumed accepting RTMFP publishes. This failure has never happened to us before so we're treating it as a one-off and not investigating.
Since the restart of that FMS, reports of subscribe failures have disappeared. That's great and we're presuming the restart fixed the subscribe failures. The strange thing is that users were reporting subscribe failures several days before we observed any publish failures. That said, we know this FMS was in a strange state so we concluded our investigation.
Thanks to Chris for the quick response on this.
Robert

Unable to see data in Table in smartform

Hi all,
I need to create a smartform where I have to print the header details at the start and then below that details for all line items for a particular document.
so i have data ;ike :
Header data :
field 1 : field 2:
Field3 : field4:
field5: field6:
Item data :
field1 field2 field3 field4 --> Item 1
field1 field2 field3 field4 -->Item 2
field 1 field2 field3 field4 -->Item3
For the Header data,Im planning to use a template in a secondary window.
However for the item data,i need to use a table (As i know the no of records only at runtime).Also another reason for usng table would be that I dont need the header on each flloowing page but only the Line item details on the following pages.
Now my ques is :
1.I hav ecreated the form and put some constant /texts to just test the form.I am able to see the texts/data in the header data.However Im unable to see the data for the Item i.e. in the TABLE.
I have used template for Header details which I can see.
I dont know what Im doing wrong.Is it because in the DATA tab under TABLES,I have given an interna table but there is no data in the table?
I have defined only 1 line type in my table an dthat has 4 cells (as I need to print 4 item fields under the Item data)
PLease let me know what I am doig wrong because of which Im unable to see the item data in table form.
Thanks!

Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks

Unable to see master data changes

I added a new field as an Attribute to Master Data (Customer Number) and loaded the data which was successfull. I created an infoset and created a report but am unable to see the values in this new field. I check 'Values in the Infoprovider' on the reports. Also when i go to RSISET and look for Infoset Values I do not see them there.

Hi,
I think there are two things you should check:
1. Have you seen the data for which you added into the attribute in your InfoObject?
2. Have you seen the field which you added into the attribute in your InfoSet?
If you got a "NO" answer, you maybe lose step(s).
Hope above helps you.

I am unable to see text after clicking on a pdf download.I just get a mid grey screen .I can send the pdf to my blackberry and see it -so the file is ok .I recently was at an official site that gave me an Adobe down load /update .Help please .

Why am I suddenly unable to see pdf (on iMac) when I click on them ?There is is just a mid grey blank screen .I have sent pdf to my Blackb and I can read it there ,so the file is OK .I recently tried to down load a recent version of Adobe reader from a government site -could this be the cause?If so ,how do I uninstall it ?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Unable to generate report for size of KM folder

hi all,
i want to generate report for size of folder in KM.I am havingthe following roles content admin,content management,system admin,home, are these roles sufficent to generate report or any roles are needed?
And other issue is after going into Content management role I am clicking reports workset but I am unable to see "Folder Size Calculation" option, any full access are needed to see it.
I am following help.sap link plz don't send it ,give me any other Material.
After starting the Km report in Resource Statistics its showing size as zero.
help me in sloving this issue.
thanks in advance,
Aravind

You could find all KM reports to the given navigation
try all these paths...I am unable to findout your issue definitely permission related
System Administration -> System Configuration -> Knowledge Management -> Content Management -> Related Topics -> CM Repository Reports
Content Administration -> KM Content -> Toolbox -> Reports
Content Management -> Reports
Regards
Koti

Unable to call report from forms-oracle9iDS.

hi..,
i created a report in reports 9i and calling the same
from a form created in 9i,i am calling from a push button having following code in it..,
Declare
report_id Report_Object;
ReportServerJob VARCHAR2(100);
BEGIN
report_id:= find_report_object('MyReport1');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'repserver');
ReportServerJob:=run_report_object(report_id);
end;
while clicking this button i am getting the following messsage "frm-41214:unable to run report".
steps followed
1.Created a report by name myreport1.rdf
2.attached the myreport1.rdf in the reports node of the forms browser.
3.Created a reports server by name "repserver"using
rwserver repserver -install autostart=yes
4.report_path is checked for the path where my report is residing.
5.added a string value in regedit tns_admin='oracle_home\network\admin'
(**)6.in TNSNAMES.ORA I expect the error is here..,
how do i refer this repserver in TNSNAMES.ORA..,????
database server is in another node..,and report server is in my machine itself..,
please help me urgent..,i am trying hard for this for a long time...??
Regards,
Akula.
protechsoft systems Pvt.Ltd.
Chennai,India.

Akula,
the Reports Server name doesn't need to be mentioned in teh TNSNAMES file anymore. This was required in Reports6i and before. Since Reports9i the architecture has changed and a Report Server can be accessed by its name in teh network. The problem that is reported can be due to uncompiled PLSQL in teh Reports rdf file. If you check the Reports queuemanager (on Windows) or using the Servlet command then you see the detailed error message. If you don't see any error message in teh queuemanager then the Reports module file wasn't found. Make sure that the Reports9i Server has access to this. The Reports9i Server Reports_Path is not set in the registry (as far as I know) but in one of its configuration files.
As a quick test - look for the Reports sample files and add your file to the same directory.
Frank

Unable to see the field in PSA

HI Experts,
Good day to ALL!
I developed the reports every thing fine but one of the field FISTL_WP in datasource 0HR_PY_1 able to see the data in rsa3 and same field data unable to see in PSA level and as well as RSA6 data source level in ECC system so any one face the issue before please pass your inputs.
Regards
RK

Hi,
You can write custom program on ecc dev system T code - SE38.
Check below code.
Report ZROOSFIELD
tables: ROOSFEILD.
SELCT SINGLE * FROM ROOSFIELD WHERE OLTPSOURCE = '0HR_PY_1' AND
OBJVERS = 'A' AND FIELD ='FISTL_WP'.
IF SY-SUBRC = 0.
ROOSFIELD-SELECTION ='P'.
MODIFY ROOSFEILD.
ENDIF.
do the syntax check and execute it. Later check above table. you filed SELECTION will be as P.
After that you can see at RSA6 and replicate data source to bw side. Do the rest of the things at bw side.
Thanks

Unable to see report footer

Similar Messages

Maybe you are looking for