Unable to send fax with verizon (not fios) landline

Recently switched from comcast 2 verizon (not fios) and cannot send faxes. I have a dell all in one printer Photo 926. Can someone please help, I need my fax asap! Thank you!

Do you have a dialtone at the phone jack which the fax machine uses? I would recommend connecting a standard phone to this jack to check for dialtone.
I do not know what settings are available for your fax machine, but it may also be worthwile to reset the fax machine to factory defaults and start from there. We do not limit your ability to send faxes.
If this does not resolve your trouble, please send me a Private Message and we can work on a resolution.

Similar Messages

Unable to send FAX of Delivery Note Adobe form - Not visible in SOST

Hello,
I have created a delivery note adobe form and the output medium has been configured as FAX. But when we are doing any delivery in VL02N, the FAX output is not going to SOST.
Let me tell you that, for printing it's working fine. It's going to SP02 successfully.
Thanks
Satya

Hello Satya,
This issue may be due to several reasons. Here are some of the reasons.
1. check the settings in the of fax in scot transaction.
2. check the whether any virus scan profile is active, if it is active, check whether any default profile is maintained or not.
Please provide me the procedure or function module which you are using to send fax. so that it will be easy to understand the type of the error. Also check whether email is working for the above scenario
thanks,
Rakesh.

Unable to send fax from computer

Hi,
I'm unable to send faxes from my computer (e.g, from Word). I get a message: "The device is disconnected or powered off", which is not true.
The printer is an HP LaserJet 1536dnf MFP.
The OS is Windows 7 Ultimate, 64-bit, with 8 GB RAM.
I have updated to the latest firmware from the HP site, and have downloaded the latest appropriate driver package for this printer from there as well (hp_M1530_MFP_full_Solution_usb_n_w.exe)
The installation goes normally, and there are no error messages.
The printer is working fine. I am able to print and scan from the computer without problems. I am also able to fax directly from the printer without problems. The only problem is not being able to send a fax directly from the computer.
For instance, in Word (the latest version), when I print to the HP fax printer (which has indeed been installed correctly on the computer), I get a message that the doc has been send to the printer. But no screen pops up letting me type a phone number, and after about 1 minute I get this error:
Have been on the phone for several hours to HP support, and although they did a complete uninstall, and reinstall, the problem persists.
I also downloaded and ran this file from HP: HPLJ_M1530_Fax_IE_11_utility.exe, which is meant to resolve a very similar issue for people who have this Microsoft KB installed (KB2898785), which somehow interferes with the fax exactly as I have described. I do indeed have that Windows update installed. However, running the file did not solve the problem, and there seems to be no way of uninstalling that KB.
So I am at a loss, and would appreciate any help, if anybody can think of anything.
Many thanks
Tim

Hi @Tim613 ,
I see by your post that you are unable to send a fax from the computer. I would like to help.
Since you are able to print and scan from the computer, you don't have a communication issue. The printer will also send a fax, so it isn't a hardware issue. It sounds more like something possibly on the computer is blocking the fax communication.
The Toolbox doesn't support Windows 7 64 bit, but you should still be able to fax through Third Party Software. (Word) Which you have already tried and it didn't work.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Try sending a fax again.
Then you will have to go back and enable the startup programs and turn the Antivirus Software back on again.
Let me know the outcome.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to send fax via internal modem

Until two days ago our internal modem was working fine we have been able to send faxes with no problem. I have ran disk first aid and repair, but the modem still is not able to send a fax. We have check the phone line and there is a dial tone up to the computer, but not dial tone in the computer. Is my modem dead or is there another way to fix the problem.
Thanks

If you want to use the modem to send and receive faxes, then you don't want to have the Network trying to control it, you should disable the modem port in the Network prefs and use only the Ethernet port. You can use the Network prefs to troubleshoot to ensure that the modem is in working condition, but you can't have the network dial-up taking control of the modem at the same time as you want to be waiting for a fax or sending a fax. This can cause the modem to get hung, and you will get the waiting behavior that you described.
You should just be able to receive faxes by checking the "Receive faxes on this computer" button in the Print & Fax Prefs. If you had an external modem you could see some activity lights come on as soon as you check the box as it goes into standby to answer a call mode, with an internal the only way to know it's working is to send yourself a fax.
To send a fax, I think you might need to configure a Fax printer, if you don't seem to have one already. Click the "Setup Fax Modem..." button at the bottom of that Print & Fax Prefs. IF you launch /Applications/Utilities/Printer Setup Utility can you select from the View Menu: Show Fax List and does anything show up in the list? You should have a Fax List and fax printer in that list similar to your Printer List and whatever printer you have installed.
To check if the modem is even working you may have to use some modem terminal utility like ZTerm that will let you type simple commands and check the modem response. For example AT should result in an OK. With the internal you can't check the activity lights to see if you are receiving data or sending data, so I'm not sure how else you can verify the internal modem is actually functioning. It might be worthwhile checking that first, or if you know you can use it for dial-up, I still use my modem as a backup for when DSL goes out (rarely).

Getting: Unable to send attachment with Mail Drop

Mail Drop is not working for me, I always get error message while trying to send.
Here is what happens:
-I compose a message that includes a large attachment
-I click send
-I get the message "Unable to send attachment with Mail Drop" for a few seconds
-My message is not sent and it goes into the Outbox folder.
Configuration:
OS X 10.10 Yosemite
Mail -> Preferences -> Accounts -> Advanced. The option "Send large attachments with Mail Drop" is selected.

I had the exact same problem. I finally figured out what was wrong. I believe you must have iCloud Drive turned on in System Preferences AND you also must allow mail to store document in iCloud Drive which you can check by clicking the "Options..." button in the preference pane of iCloud Drive. As you can see below.

Send Object With a Note

Hi
When selecting 'Send object with a note' from a purchase order and clicking on the 'Attributes' tab the Sensitivity is set to '502 Confidential'. Can you please advise how to change the sensitivity to '501 Standard'?
Thanks

Hi all,
I have found the solution for it.
Share with you.
Inside Function Group:CRM_1O_UI
Include LCRM_1O_UIF17
for the 'is_disabled' field control the status of the corresponding fcode.
Update following code:
{   INSERT         xxxxx                                      1
if sy-cprog = 'SAPMCIC0'.
    CALL METHOD toolbar_create_process0->add_button
      EXPORTING
        fcode       = lv_fcode
        icon        = lv_icon
        butn_type   = lv_type
        text        = lv_text
        quickinfo   = lv_tip
        is_disabled = 'X'.
else.
*}   INSERT
    CALL METHOD toolbar_create_process0->add_button
      EXPORTING
        fcode       = lv_fcode
        icon        = lv_icon
        butn_type   = lv_type
        text        = lv_text
        quickinfo   = lv_tip
        is_disabled = ' '.
*{   INSERT         xxxxx                                       2
endif.
*}   INSERT

7520 can send faxes but can not receive faxes

We just installed the 7520 and everything seems to work fine except receiving faxes.
We can send faxes just fine, however the strange thing is when I try to call the fax number from a phone it acts like its dead, you never hear it ring or anything then it just disconnects. If I switch the phone cord to the Ext connection in the back of the device and then call the number I can hear it ringing on the calling phone and on the 7520 device. The display lights up because there is an incoming call and shows that auto answer is on, but when it answers we never hear the normal fax type tones and it never connects.
The phone is being supplied by Time Warner Cable and it plugs into the cable modem. We called Time Warner and they told us that the line for the fax is an analog line but I have no idea how to check that or prove that.
I can't figure out why it will send faxes with no problem but seems like its a dead line when trying to receive a fax.
Any thoughts?
This question was solved.
View Solution.

With the printer's phone cord connected to the wall jack and the "1-Line" {nothing plugged into the 2-Ext} port, try running the Fax Test. See Step 5. Does everything pass?
Make sure the Distinctive Ring option is set for All Rings unless you have a distinctive ring set up with your phone service provider.
If you use a filter for your telephone, try using a filter for the printer.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Unable to send email with an attachement (photo) through activesync (zarafa) after upgrading to ios8

Hello,
I just upgrading to ios 8 (8.0.2) and I am now unable to send email with an attachement (photo) through activesync (zarafa).
It works fine with smtp or through activesync but without attachement.
Is there any solution?
Thx.

It worked fine with the last version of iOS 7 and still works fine with outlook connected from a PC to the same activesync server.

Can not send mail with verizon email

Please help me! I can not send mail useing my Verizon email. I can recieve but not send. I am not that savy so please help me!

your outgoing mail should be:
SMTP mail server: outgoing.verizon.net
you should have a password set
SSL should be off
authentication should be password
server port 25

"Unable to send mail" using Verizon email account

No matter what I try, my Incredible will not send an email using my Verizon email account. I receive emails but cannot send. I've verified the account settings numerous times and the verifications always work. But I still get the "Unable to send mail" message. Initially I thought it was the port but I've tried both 25 and 587. Neither work. I know I've sent messages before but it's been a while. Anyone have any ideas?

I tried SSL with 25 and 587 (Verizon recommendation). Still no go.
BTW, there isn't any way to save the Mail size limit and Download options is there. Every time I go thru this I have to go back and set these up again.
Thanks again for your help.

Unable to send Fax

While I was able to send faxes in the past, suddenly I cannot. Now when I click print - send fax and fill in the info to send I get a "error while printing"message. The "modem" field in the fax dialog box reads "no fax selected" When I click "show fax list" the box is empty. I have gone to help, system preferences-print and fax, and searched the forum etc. without finding a solution. Any new ideas? Thanks. (I did recently perform my first "cleaning" operation with OnyX)

Is it showing up in Printer Setup Utility's Printer List or in Printer Setup Utility's Fax List?
Where are you seeing this checkbox and stuff? When I launch /Application/Utilities/Printer Setup Utility, I don't get any sort of windows with Internal Modem listed (in either the Printers window, where it doesn't belong anyways) or in the Fax window, with any sort of checkbox.
Or are you talking about System Preferences Print&Fax? I see checkboxes, but Internal Modem does NOT show up in the Printing List in my Sys Prefs' Print&Fax, and mine works. Yours must be mistakenly thinking its a printer and not a fax driver. Search your hard drive for Internal Modem or Internal Modem.app and tell me where you find it. Mine is in my User Library folder's Printers folder, along with HL-1440 series.app, which belongs to my Brother laserprinter. Other user accounts on my computer that have never sent a fax before do not have Internal Modem.app in their User Library folder's Printers folder.
Have you considered, in an act of desparation, to reapply the OS 10.4.10 combo update? If there are components of something missing from system software, or corrupted components present, that should reinstall them. Just remember to verify your disk before you start, and repair permissions both before and after you reapply the combo update. I would, however, be tempted to either delete this Internal Modem thing, or at least temporarily relocate it to your Desktop or something, before reapplying the combo update, and then recreate your SysPrefs Print&Fax Faxing setup, then do the FAX PDF stuff again from Text Edit.

Unable to send fax Fax-HP Officejet Pro 8500 A910

I have a Fax-HP Officejet Pro 8500 A910 All-In-One. I had to reinstall it. It is telling me that I have installed it correctly and is on the network. I installed without using a USB. I am on wireless networking.
I have tried several times to send a fax. I'll imput the numbers, then I'll hear the ring. It continues to ring several times, then it will hang up and print out a notice saying, "No answer". I know I have the correct number. I tried another fax to a different number and receive the same outcome.

Welcome to the forums @Tomalene ,
I understand you are having some troubles with sending faxes. I would suggest checking out the guide below and trying the steps. Afterwards you should be able to fax again!
Cannot Send or Receive Faxes
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Sending FAX with attachments using in RightFax

Hi,
We are in CRM 7. and sending Fax using RightFax - Rightfax through SMTP/SAP Connect configured.
In case the outgoing Email in format html – attachment not sending through RightFax
(Mail document class is MHT)
I can see the mail with the attachment in SOST
In case the outgoing Email in format text – attachment sent correcty.
)Mail document class is RAW)
It’s probably related to mail document class,
But I didn’t figure it out.
Thanks,
Liat

For oracle8i there is an example package from OTN:
http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
You have to re-write the package a bit to work it with BLOBs instead of RAW attachments, but that should be no problem
Hop this helps,
Michiel

No longer able to send fax with Brother MFC-8820D

I used to be able to send a fax by going to the Print... dialog box and selecting "Send Fax..." from the dropdown menu. Unfortunately, "Send Fax..." isn't there anymore. I've installed the latest Brother drivers. I'm not sure, but this may have started a couple versions of Leopard ago.
Any ideas?

According to the Brother website, the Printer driver for my MFC is bundled with OS X 10.5. Furthermore, it states: "The Bundled Drivers support the PC-FAX Send and the Status Monitor features." Scanner driver can be downloaded separately, but there's nowhere else to get the fax driver. So I'm still stuck.

Unable to send emails with exchange

I have set uip exchange on my Iphone5, I can receive emails but not send them, it says "recipient r4ejected by server" I have tried this with several email addresses. Should I set the exchange account up as an Imap, if I do it wont sync

Hi there n2tck!
I have an article for you that can help you troubleshoot this issue with your email account on your iPhone. The article can be found right here:
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Specifically, you may want to try the last step:
Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
If that doesn't do the trick, you might want to follow the advice at the end of the article:
If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
Hope that helps. Thanks for using the Apple Support Communities!
Regards,
Braden

Unable to send fax with verizon (not fios) landline

Similar Messages

Maybe you are looking for