Unable to sqlplus as user system to a standby db in recovery mode
Getting "ORA-01033: ORACLE initialization or shutdown in progress".
When trying to sqlplus system user on a standby instance that is in recovery mode.
Where as able to log in as sqlplus "/ as sysdba"
I checked the db it is not shuting down or starting it is in recovery mode.. no errors in alert log..
1) --------------------
$ sqlplus system@TEST1
SQL*Plus: Release 9.2.0.6.0 - Production on Sun Feb 26 04:47:35 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter password:
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
$ ps -ef | grep mrp
oracle 26759 1 0 04:24:19 ? 0:00 ora_mrp0_TEST1
2) -------------
$ sqlplus "/ as sysdba"
SQL*Plus: Release 9.2.0.6.0 - Production on Sun Feb 26 04:50:14 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
3)--------
$ sqlplus "/ as sysdba"
SQL*Plus: Release 9.2.0.6.0 - Production on Sun Feb 26 04:50:14 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
4)----------
SQL> select process, status from v$managed_standby;
PROCESS STATUS
ARCH CONNECTED
ARCH CONNECTED
MRP0 WAIT_FOR_LOG
RFS RECEIVING
A standby database in recovery mode is only accessible as sysdba for administrative purposes. You have to open the DB in read only mode to access it as "normal" user.
See http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96653/manage_ps.htm#1014483
Similar Messages
-
I have updated my 3gs to the latest operating system but it is stuck in recovery mode and will not restore...any suggestions on getting it to restore?
Yes, a message pops up on the computer that says..."The iPhone could not be restored. An unknown error occurred. (3014)" I tried to research this and tried all of the things Apple suggested but still am not having any luck with it. Thanks for any assistance you may provide!
-
Unable to update iPad 2 software and it's still in recovery mode.
I have been noting some weird behavior on my iPad 2 I so tried to update my iPad to to iOS 6.
Before doing it I tried to sync my apps to iTunes so I would not lose anything. I was unable to sync and a got a message that said "Unable to sync because the sync process faied to start". So to fix that I tried to download and install the iOS 6 update and the update fails due to a "corrupted download file please try again" message. Then I updated iTunes to the latest version and tried all the previous steps again producing the same results. In the process of doing this I somehow I got the iPad into recovery mode and I can't recover to orginal settings because install fails with the "corrupted download file pleas try again" message.
So, hear I sit with a disabled iPad and now apparent way of fixing it.
I am out of ideas on what to try next. Any suggestions what to do?
Also note I did this with my MacBool which is hard wired to my network. No wifi connection was involved.Are you getting an error of some kind when attemptign a restore? was the restore sucessful (broadcasted a message from itunes that it was complete)?
-
Unable to restore ipod 4th gen... kept getting error recovery mode
im unable to restore my ipod 4th gen... it keeps looping back to where it says, the ipod is in recovery mode needs to be restored
Whatr is the exact wording of the error message?
-
I have created a user in oracle BPM but it is not reflected in system-jazn-data.xml file and I am unable to authenticate that user to create context as needed in workflow client
weblogic credentials are different.
and using thode credentials I am able to login to weblogic server
the users I am talking about is the process users defined in realm.
in realm those users are defined as Default authenticator and OID authenticator.
and I am trying to authenticate one of those users defined in realm using java api so that I an access a process defined In Oracle BPM 11g -
Error: unable to connect to database using user system. please check privil
Hi All,
i have 2 oracle databases in my system (ORCL,RR). i am able to connect both databases i sql prompt. but in ggsci prompt not able to connect rr database due to below error
dblogin userid system, password tiger.
Error: unable to connect to database using user system. please check privil
Can you please help me to connect RR database also in GGSCI promt.
Thanks
RajaDid you try with RR database tns name or sid while connecting ?
If No then try this ,
GGSCI (ATP) 6> DBLOGIN USERID SYSTEM@<tns alias name>
Password:
Successfully logged into database.
HTP
Annamalai. -
Unable to load the user interface-please reinstall the application-Audigy 2 zs Platinum
unable to load the user interface-please reinstall the application---this is the message I get when my pc starts------Someone messing around with my computer tried to delete creative media source player 3 when they saw I had both 3 and 5 in folder and i get this error message every time I start my pc. In addition to this I have lost my EAX and THX consoles and my speaker settings are gone so I cannot adjust my 5. system at all. After I delete that error message when I click on the creative icon is sys tray instead of opening up the creative media player I get the error message--unable to load needed componants. Please reinstall the application. this is media player 3[version 3.32.]. I dont know why during the auto?updates through the last couple of years I have media player 3 in sys tray and if I need version 5 it is in file with 3--start-all programs-creative--any way my pc is a Cyberpower AMD FX-53 using win xp pro-32 bit-- and of course its a OEM product so they tell me the only way to get it to work is use the restoration cd they gave me when I bought the pc and it will revert back to its original state as when purchased. I would lose all my games, music, pictures?ect and would have to start from scratch.[ OR of course back everything up on a portable hard dri've]?It seems like there should be an easier way --hell I might as well buy a new soundcard and it would make it easier. If anyone?has an answer for someone who is not a tech head so I can understand please help !!--thank you in advance for any assistance as it is greatly appreciated. Sorry this message is so long winded, just irritating to have spen so much for a pc and not have the original installation disc.-tried moving to another slot and the fixes I saw posted here with no luck---thank you folks again--Tom
All the issues you guys are talking about have been reported in beta stage of these new drivers. I would say none of them has been fixed yet. The only solution for now is to use previous drivers which work fine or use some modified drivers which fixes some issues, but not all. Your choice.
[url="http://connect.creativelabs.com/windows/Lists/Audigy%20Issues/AllItems.aspx">Bug List[/url]
Message Edited by ronon0 on 08-07-2008 :47 AM -
One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically. -
Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (24-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 8800 GS - VRAM: 512 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
Hitachi HDS721010KLA330 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.warmd_agent.plist
11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nesessionmanager.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.wdhelper.plist
[killed] org.cups.cupsd.plist
12 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[running] com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
ChronoSyncBackgrounder Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
Dropbox Application (/Applications/Dropbox.app)
Canon IJ Network Scanner Selector2 Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Google Drive Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
WebEx: Version: 1.0 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS2 [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
VIA PrefPane [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
3% Mail
2% com.apple.iCloudHelper
1% Creative Cloud
1% Google Chrome
Top Processes by Memory: ℹ️
223 MB Google Chrome
150 MB Finder
129 MB Google Chrome Helper
112 MB Mail
69 MB Google Drive
Virtual Memory Information: ℹ️
35 MB Free RAM
1.45 GB Active RAM
1.45 GB Inactive RAM
888 MB Wired RAM
27.01 GB Page-ins
851 MB Page-outsWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Unable to search for users in CUP
Hi Guru's
When I am tryin to create a request in CUP , I am unable to search for users , the search option doesnt return any values at all
I have checked my user data source which is LDAP, the connector is working fine , and I have the field mapping done etc ,but I still cannot search for users.
Any thought on this
Regards
KSHi Venkateshwar,
Thanks for the quick response ,
my user path looks somehtinkg like this
User path : DC=unity
This connector is defined by my Basis guy ,I am not sure what wouldl be the compelte path
have you got an example ?
I guess I will have to check with teh guys who maintain the active directory ( our LDAP system )
Thanks
KS -
Why Unable to identify a user for 802.1X authentication (0x50001)?
Hello,
We are trying to set up wifi single-sign-on. When logging to a laptop get a message
"Connecting to Pivot_Users" and after some time "Unable to connect to Pivot_Users" and after that we are logged in to a laptop and successfully connected to Pivot_Users wifi network.
Server: windows server 2003 (with all updates)
laptop: windows 7 professional SP1 (with all updates)
When looking to event log i found this error:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2012-10-10 10:38:01
Event ID: 5632
Task Category: Other Logon/Logoff Events
Level: Information
Keywords: Audit Failure
User: N/A
Computer: sba01-nb
Description:
A request was made to authenticate to a wireless network.
Subject:
Security ID:
Account Name: -
Account Domain: -
Logon ID: 0x0
Network Information:
Name (SSID): Pivot_Users
Interface GUID: {64773f24-bf8b-4e91-bbd7-eb199e3c2c5e}
Local MAC Address: C4:85:08:12:77:44
Peer MAC Address: 00:24:97:83:8E:61
Additional Information:
Reason Code: Unable to identify a user for 802.1X authentication (0x50001)
Error Code: 0x525
EAP Reason Code: 0x0
EAP Root Cause String:
EAP Error Code: 0x0
Event Xml:
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>5632</EventID>
<Version>1</Version>
<Level>0</Level>
<Task>12551</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2012-10-10T07:38:01.093305500Z" />
<EventRecordID>37791</EventRecordID>
<Correlation />
<Execution ProcessID="760" ThreadID="2224" />
<Channel>Security</Channel>
<Computer>sba01-nb</Computer>
<Security />
</System>
<EventData>
<Data Name="SSID">Pivot_Users</Data>
<Data Name="Identity">
</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="PeerMac">00:24:97:83:8E:61</Data>
<Data Name="LocalMac">C4:85:08:12:77:44</Data>
<Data Name="IntfGuid">{64773F24-BF8B-4E91-BBD7-EB199E3C2C5E}</Data>
<Data Name="ReasonCode">0x50001</Data>
<Data Name="ReasonText">Unable to identify a user for 802.1X authentication</Data>
<Data Name="ErrorCode">0x525</Data>
<Data Name="EAPReasonCode">0x0</Data>
<Data Name="EapRootCauseString">
</Data>
<Data Name="EAPErrorCode">0x0</Data>
</EventData>
</Event>
Thank you for answer and help.
Regards,
TadasHi,
Thanks for your post.
Have you configured the client to only use user authentication for 802.1X? If so, I would like to inform you that this is expected when you configure the 802.1X to user only authentication.
Here is the process that is followed.
1. As soon as client is connected to the network the Authenticator (switch) periodically sends EAP request packet/frame to the client/supplicant.
2. The client has to respond back with an identify and if its configured only for User authentication then it will send blank identity.
3. The Authenticator cannot validate and the authentication would fail.
4. Windows client is configured for a block time of 20 min. So, once the authentication fails the NIC card will go in block time for 20 min until there is a change in credentials. So, even if the authenticatior(swithch) is periodically sending EAP request
it will just ignore them
5. You will see event 15506 after the event 15514.
Here’s the technet that you we can refer for the reason code : Reason: 0x50001 that we see in the event 15514
http://technet.microsoft.com/en-us/library/cc727747(WS.10).aspx
0x50001 = Dec 327681
Reason code: 327681 Event log message: The 802.1X module was unable to identify a set of credentials to be used. [An example is when the authentication mode is set to “User” but no user is logged on.] # def name:
ONEX_UNABLE_TO_IDENTIFY_USER
Best Regards,
Aiden
Aiden Cao
TechNet Community Support -
Component Monitoring Issue: Message: Unable to log on to system XYZ
Hi,
I have installed PI 700 with SID ABC and configured with R/3 system SID XYZ.
Now while checking Component Monitoring-->Integration Engines--->Proxy Runtime XYZ I am getting following error.
Message: Unable to log on to system XYZ in language en with user PIRWBUSER
Stacktrace:
com.sap.aii.rwb.exceptions.OperationFailedException: Unable to log on to system ID6 in language en with user PIRWBUSER
at com.sap.aii.rwb.core.XIAbapRTCComponent.getConnector(XIAbapRTCComponent.java:114)
at com.sap.aii.rwb.core.XIRTCComponent.selftest(XIRTCComponent.java:303)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doSelftest(CompTestModel.java:608)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doSelftest(CmDynPage.java:304)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:375)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:388)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:339)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
And if I create user PIRWBUSER in my R/3 system XYZ, I get different kind of error.
Details for 'Can the SLD be reached?'
SLD ping gets exception: Error when opening an RFC connection
Under Message Monitoring below is the error:
com.sap.aii.utilxi.misc.api.UnexpectedException: Internal Error: An unexpected error occurred (java.lang.NullPointerException: null)
Can anyone have a look and guide me how to resolve this issue.
Thanks & Regards,
ManishHi Prateek,
I have already created PIRWBUSER in my R/3 system as I have mentioned in my first post. After that I am getting error for Proxy Runtime XYZ as below:
Result of Self-Test
Can the SLD be reached? (Failed) ... Details
Does the Integration Engine know the business system? ... Details (Successful)
Are roles in SXMS_CONF_ITEMS and SLD consistent? ... Details (Successful)
Has an Integration Server destination been defined? ... Details (Successful)
Details for 'Can the SLD be reached?'
SLD ping gets exception: Error when opening an RFC connection
What else I have to do in this case?
Thanks & Regards,
Manish -
I am looking for some help to deploy the application in weblogic6.0.
This is what i did during the application deployment.
Create a new directory under config as a new application.
D:\bea\wlserver6.0\config\test
under test created two other directories applications and logs.
Under the applications directory copied .ear and .war files.
Under the test i copied config.xml, all the *.pem starttest.cmd, fileRealam.properties
files. Modified the config.xml with my application, domain and the server. Modified
the settest.cmd with the new domain and server name.
when i do startup, it is prompting for the password and i entered what ever i mentioned
during the installation.
And getting the following error.
Thanks alot for any suggestions.
D:\bea\wlserver6.0\config\test>startTest.cmd
D:\bea\wlserver6.0>set PATH=.\bin;D:\bea\jdk130\bin;C:\RATIONAL\RATION~1\NUTCROO
T\bin;C:\RATIONAL\RATION~1\NUTCROOT\bin\x11;C:\RATIONAL\RATION~1\NUTCROOT\mksnt;
C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Dell\Resoluti
on Assistant\Common\bin;C:\PROGRA~1\MICROS~4\Office;C:\PROGRA~1\ULTRAE~1;C:\Rati
onal\common;C:\Rational\Rational Test;C:\jdk1.3\bin;C:\Ant\bin;
D:\bea\wlserver6.0>set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
D:\bea\wlserver6.0>D:\bea\jdk130\bin\java -hotspot -ms64m -mx64m -classpath .;.\
lib\weblogic_sp.jar;.\lib\weblogic.jar -Dweblogic.Domain=test -Dweblogic.Name=te
stServer -Dbea.home=D:\bea -Dcloudscape.system.home=./samples/eval/cloudscape/da
ta -Djava.security.policy==D:\bea\wlserver6.0/lib/weblogic.policy weblogic.Serve
r
Enter password to boot weblogic server:password
Starting WebLogic Server ....
<Feb 14, 2001 12:13:04 PM EST> <Notice> <Management> <Loading configuration file
.\config\test\config.xml ...>
<Feb 14, 2001 12:13:06 PM EST> <Info> <Logging> <Only log messages of severity "
Error" or worse will be displayed in this window. This can be changed at Admin C
onsole> test> Servers> testServer> Logging> Debugging> Stdout severity threshold
>
<Feb 14, 2001 12:13:08 PM EST> <Emergency> <Server> <Unable to initialize the se
rver: 'Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user system denied in
realm weblogic
java.lang.SecurityException: Authentication for user system denied in realm webl
ogic
at weblogic.security.acl.Realm.authenticate(Realm.java:209)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
at weblogic.security.acl.internal.Security.authenticate(Security.java:11
3)
at weblogic.security.SecurityService.initializeSuid(SecurityService.java
:293)
at weblogic.security.SecurityService.initialize(SecurityService.java:123
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised: java.lang.SecurityException: Authentication for user system de
nied in realm weblogic
java.lang.SecurityException: Authentication for user system denied in realm webl
ogic
at weblogic.security.acl.Realm.authenticate(Realm.java:209)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:229)
at weblogic.security.acl.internal.Security.authenticate(Security.java:11
3)
at weblogic.security.SecurityService.initializeSuid(SecurityService.java
:293)
at weblogic.security.SecurityService.initialize(SecurityService.java:123
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:343)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:169)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
D:\bea\wlserver6.0>goto finish
D:\bea\wlserver6.0>cd config\test
D:\bea\wlserver6.0\config\test>ENDLOCAL
D:\bea\wlserver6.0\config\test>Seen this, may give a clue?
Server Known Problems Change Request Number Description
042556
The weblogic.Admin command now requires the user and password options. For example:
java weblogic.Admin -username system -password gumby1234
The username "system" is required for most functions (for example: VERSION). If
you do not specify -username system, you will get the following error:
Exception in thread "main" java.lang.SecurityException: Authentication for user
system denied in realm weblogic
<<no stack trace available>>
"lazar" <[email protected]> wrote:
>
I would also like to know, if there is a fix for it.
Thanks
Lazar
Greg Layton <[email protected]> wrote:
Did you ever get an answer to this. If so could you share it with me.ThanksGreg -
SolMan 4.0 Solaris / Oracle install: Unable to create account user
Hi!
Am I getting this error during step 2 (Create users for SAP System) of the Solution Manager 4.0 installation. This error occurs when SAPinst is trying to create account "orasol" for system "SOL".
INFO[E] 2007-02-14 13:12:51
FSH-00006 Return value of function getpwnam(orasol) is NULL
ERROR 2007-02-14 13:12:51
FSL-01002 Unable to create account user="soladm". UX: /usr/sbin/useradd: ERROR: Unable to create the home directory: No such file or directory. (return code 12)
ERROR 2007-02-14 13:12:51
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
Please let me know how I can fix this error!
Regards,
ThomasHello Thomas,
It looks like a Solaris issue. Check if the home directory
/home is reserved in the Solaris configuration.
Check if this fix the problem please perform the following steps:
1. modify /etc/auto_master file to change the entry for '/home' to say
'/autohome' instead
2. reboot
3. rmdir /home
4. ln -s /export/home /home (make sure /export/home exists)
Also you could create soladm manually in advance.
Hope this helps,
Dolores -
Hello all. For entering in Oracle 10g Db we start SQLPLUS. user-name "system" and
password containing @ (my mistake), TNS error view. Presently I know that problem
in "@" symbol. While understood the user "system" is locked....
As possible change password and unlock the user?
Or create the the new user for Oracle....
Please advise ....Hi
Use brconnect to change the password
Check this link
http://help.sap.com/saphelp_nw04s/helpdata/en/4f/c3883989676778e10000000a11402f/content.htm
Thanks
Prince Jose
Maybe you are looking for
-
i keep getting this message http://i43.tinypic.com/2rqj23l.jpg i have downloaded the 64 one. i'm unsure what i have to do, any advice woud be great as i cannot use my iphone as i need to sync it! Thanks
-
Acrobat Flattening Form Fields and Optimizing for Web
I'm trying to optimize a PDF for the web and flatten all the form fields. I also want to remove the purple dialogue box at the top when optimizing on the web. Has anyone else experienced this problem? I've toiled around with it for some time and can'
-
Problems with Blackberry Pop Up Blocker
When I try to enter to a web page I receive this message from my Blackberry 8100 "System has been blocked by POP-UP-BLOCKER. Please diseble the POP-UP BLOCKER and try again" I have been trying all the recommendations buts it is not working. Thanks
-
Can bpel convert multiref response of service in good struct!?
-
I don't usually have a problem syncing my ipone4 but today I am getting a message on my Mac saying my phone is in recovery mode. My iphone is frozen with an illustration of the connector and itunes.