Unable to start crs on single-node instance

Hello -
I am running 11.1.0.7 for my ASM instance, and I am unable to start crs. I get the following error message:
[root@mbiwfhmdwee 624]# ./crsctl start crs
Attempting to start Oracle Clusterware stack
Failure at scls_scr_create with code 1
I just installed the Oracle software, and this is the first time I am trying to get ASM running on this server.
Any help is appreciated!
Thanks,
Mike

you are probably hitting bug 4632899 - CSS does not start if hostname has capital letters (ML note 4632899.8)
=> Change the hostname to from uppercase to lower case.

Similar Messages

Unable to start crs services

Hi,
I have completed installation of Oracle Clusterware 10.2.0.1 on Linux X86, RHEL 4 (using OCFS2). This is a two node system.
After running a few tests we had some disk corruption on the shared storage system and hence we had to reformat the shared filesystem (only the shared FS not the local filesystems on the nodes). I copied the backup OCR and VDISK files into their original directories after the formating, and moved the mirror backups into their original directory. But I am unable to start the cluster services, I have tried the following
$./crsctl start crs
Attempting to start CRS stack
The CRS stack will be started shortly
$
Didn't work, no services started up.
I then tried the following command
$ ./init.crs start
Startup will be queued to init within 90 seconds.
But again I don't see the crs daemons up and running.
I don't see anything in the logs (crsd, css, evmd etc) the last lines there were before we shutdown everything and then formated the shared storage.
If anyone has come across a similar issue then please advice on possible errors I could look for or how to work around this to get the crs services started so that I can install the database software. Any help/advice will be appreciated
Thanks.

Hi,
since you mention the reformatting of the shared disks:
Check /var/log/messages for things like
"Cluster Ready Services waiting on dependencies. Diagnostics in /tmp/crsctl.xxxx",
best use cat /var/log/message | grep crsctl.
After that the mentioned /tmp/crsctl.xxxx file.
You might find Oracle Error PROC-0026 there:
"Error while accessing the physical storage".
What is meant is the OCR.
Check if user/group of the raw devices is still oracle:oinstall, it might have changed to root:disk by reformatting.
I myself had this case unexpectedly now some times even WITHOUT any reformatting, I suspect that touching the raw devices with Linux LVM might change ownership.
regards
Robert

Unable to start CRS

Hi experts..we are ahving 2 node RAC in 10g..Last week we took a node down and today when I was trying to bring the node back up I am facing problems with the CRS...Here are the few lines...
root@dcaxogc2[u01/crs/bin]: ./crsctl check crs
CSS appears healthy
Cannot communicate with CRS
EVM appears healthy
root@dcaxogc2[u01/crs/bin]: ./crsctl start crs
Attempting to start CRS stack
The CRS stack will be started shortly
root@dcaxogc2[u01/crs/bin]: ./crsctl stop crs
Stopping resources. This could take several minutes.
Error while stopping resources. Possible cause: CRSD is down.
root@dcaxogc2[u01/crs/bin]: ./crsctl start resources
Starting resources.
Error while starting resources. Possible cause: CRSD is down.
root@dcaxogc2[u01/crs/bin]: ./srvctl start instance -d ogcdb -i ogcdb2
PRKP-1001 : Error starting instance OGCDB2 on node dcaxogc2
root@dcaxogc2[u01/crs/bin]: ./crs_stat
IOT/Abort trap(coredump)
Alert log content
2011-05-16 12:33:41.245
[crsd(651330)]CRS-1012:The OCR service started on node dcaxogc2.
2011-05-16 12:33:42.041
[crsd(651330)]CRS-1201:CRSD started on node dcaxogc2.
2011-05-16 12:34:01.675
[crsd(651364)]CRS-1012:The OCR service started on node dcaxogc2.
2011-05-16 12:34:02.432
[crsd(651364)]CRS-1201:CRSD started on node dcaxogc2.
I dont know where the problem is coming from...how to start the CRSD? i think this might be the error.....If I am wrong please correct me...Any suggestions please....
Thanks for your time...

do it on both nodes
./crsctl start crs
wait for few minutes and check
./crsctl check crs
if all services comes up
check
./crs_stat -t
if resources not coming up, check the clusterware file logs
The Cluster Ready Services Daemon (crsd) Log Files
Log files for the CRSD process (crsd) can be found in the following directories:
CRS home/log/hostname/crsd
Oracle Cluster Registry (OCR) Log Files
The Oracle Cluster Registry (OCR) records log information in the following location:
CRS Home/log/hostname/client
Cluster Synchronization Services (CSS) Log Files
You can find CSS information that the OCSSD generates in log files in the following locations:
CRS Home/log/hostname/cssd
Event Manager (EVM) Log Files
Event Manager (EVM) information generated by evmd is recorded in log files in the following locations:
CRS Home/log/hostname/evmd
RACG Log Files
The Oracle RAC high availability trace files are located in the following two locations:
CRS home/log/hostname/racg
$ORACLE_HOME/log/hostname/racg
Core files are in the sub-directories of the log directories. Each RACG executable has a sub-directory assigned exclusively for that executable. The name of the RACG executable sub-directory is the same as the name of the executable.
refer the link:-
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/appsupport.htm

Error DOM_10079 : Unable to start service on any node

hi
i am getting below error after i have created dwh tables using 64 bit data base client . table screated successfully.
but when i try to login to informatica and trying to start the repository services i am getting below error
Error DOM_10079 : Unable to start service [INT_OBI_DES] on any node specified for the service .
in the log it says unable to connect to database orcl.
but i am able to connect to database using sql developer . but when i try it from sql plus it is giving eror saying tns error uanble to connect to connection identifier specified some thing.
before it use to work soon after i have installed 32 and 64 bit clients to create dwh tables from dac it is not working.

Hi Sai,
Yes I have installed oracle client in the same box.
Edited by: MKC on Apr 12, 2012 8:19 AM

Unable to start gsd on local node

Hi all, I am working in a live enviorment and in of help. I am wokring in a RAC enviorment and unable to start "gsd" on one of the nodes, all the rest of the services are online. Following is the visual display. Can some one tell me what I am doing wrong.
<fms-db2:/oracle/app/oracle/product/10.2>crs_stat -t
Name Type Target State Host
ora....DB1.srv application ONLINE ONLINE fms-db1
ora....MSDB.cs application ONLINE ONLINE fms-db2
ora....B1.inst application ONLINE ONLINE fms-db1
ora....B2.inst application ONLINE ONLINE fms-db2
ora.FMSDB.db application ONLINE ONLINE fms-db2
ora....B1.lsnr application ONLINE ONLINE fms-db1
ora....db1.gsd application ONLINE ONLINE fms-db1
ora....db1.ons application ONLINE ONLINE fms-db1
ora....db1.vip application ONLINE ONLINE fms-db1
ora....B2.lsnr application ONLINE ONLINE fms-db2
ora....db2.gsd application ONLINE OFFLINE
ora....db2.ons application ONLINE ONLINE fms-db2
ora....db2.vip application ONLINE ONLINE fms-db2
<fms-db2:/oracle/app/oracle/product/10.2>gsd stat
Could not start the daemon on the local node.
<fms-db2:/oracle/app/oracle/product/10.2>gsd start
Could not start the daemon on the local node.
<fms-db2:/oracle/app/oracle/product/10.2>

Hi,
Check the crsd.log under $ORA_CRS_HOME/log/$(hostname)/crsd
That will show you what the error was. At that point, you can look up the error in the documentation (not before, as others posters seem to think). All gsd does is coordinate access amongst the various tools such as dbca, so it isn't "life threatening", anyway. Usually if one dies, though, others may very likely follow.
HTH,
Steve

Unable to start Manager server using Node Manager

Hi,
I have deployed Admin server in one of my unix machine(machine1) and i able to start my Admin server using node manager, and when i try to start my Managed server in another machine(machine2) using the node manager(that machine node manager) its throwing error;
Note: am able to start Managed server using Adminurl and able to connect to Managed server node manager successfully,
but not able to start Managed server using node manager
its giving exception as below;
error:- wls:/nm/webdomain> nmStart('ms1')
Starting server ms1 ...
Error Starting server ms1: weblogic.nodemanager.NMException: Exception while starting server 'ms1'
Managed server log: -
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
[root@LinuxVM ~]# cat /root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <NodeManager> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
Nodemanager log:
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00070">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Starting WebLogic server with command line: /root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/bin/java -Dweblogic.Name=ms1 -Dbea.home=/root/Oracle/Middleware -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Djava.library.path="/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/root/Oracle/Middleware/patch_wls1035/profiles/default/native:/root/Oracle/Middleware/patch_ocp360/profiles/default/native:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/root/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/root/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/Oracle/Middleware/jrockit_160_24_D1.1.2-4/lib/tools.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/root/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/root/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/root/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/root/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/root/Oracle/Middleware -Dweblogic.system.BootIdentityFile=/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true weblogic.Server >
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Working directory is '/root/Oracle/Middleware/user_projects/domains/webdomain'>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Rotated server output log to "/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out00071">
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server error log also redirected to server log>
<Dec 13, 2011 3:40:17 PM> <INFO> <webdomain> <ms1> <Server output log file is '/root/Oracle/Middleware/user_projects/domains/webdomain/servers/ms1/logs/ms1.out'>
<Dec 13, 2011 3:40:26 PM> <INFO> <webdomain> <ms1> <Server failed during startup so will not be restarted>
<Dec 13, 2011 3:40:26 PM> <WARNING> <Exception while starting server 'ms1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServerManager.java:200)
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:604)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:71)
at java.lang.Thread.run(Thread.java:662)

You can start a managed server as follows:
print 'START NODE MANAGER';
startNodeManager(verbose='true', NodeManagerHome=nodemanagerhomelocation, ListenPort='5556', ListenAddress='localhost');
print 'CONNECT TO NODE MANAGER';
nmConnect(adminusername, adminpassword, 'localhost', '5556', domainname, domainlocation, 'ssl');
print 'START ADMIN SERVER';
nmStart('AdminServer');
nmServerStatus('AdminServer');
print 'CONNECT TO ADMIN SERVER';
connect(adminusername, adminpassword);
print 'START MANAGED SERVER';
start('VideotheekWebServer','Server');
nmServerStatus('VideotheekWebServer');
print 'START CLUSTER';
start('VideotheekCluster','Cluster');
nmServerStatus('VideotheekServer1');
nmServerStatus('VideotheekServer2');JVM properties are set using the admin console and edit the startup properties of your managed server (configuration, server start).
The properties file (startup.properties) is saved in the directory <domain-home>/servers/<server-name>/data/nodemanager.

Error starting listener on single node in RAC..Error listening on: (DESCRIP

LSNRCTL> start LISTENER_CORPNG04
Starting /ora00/app/oracle/product/11/db1/bin/tnslsnr: please wait...
TNSLSNR for HPUX: Version 11.1.0.7.0 - Production
System parameter file is /ora00/app/oracle/product/11/db1/network/admin/listener.ora
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vir_corpng04)(PORT=1521)(IP=FIRST)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
HPUX Error: 227: Can't assign requested address
Listener failed to start. See the error message(s) above...
LSNRCTL>
Plz help its production system
Thanks in Advance
Gagan

Hello,s
First of all, check the status of all resources by using crs_stat -t
Check if your VIP resource is indeed up and running on the node where you want to start the listener. As listener is depending upon this VIP address, it is needed to be up on the node where listener is configured. If this is the case then relocate the vip back to the system by using either of the following commands
1. crs_relocate <vip_resource_name>
OR
2. srvctl start nodeapps -n <hostname>
listener should be automatically up once crs relocates back the vip to the system.
If vip is already running fine on the system then check for your listener configuration as you check in normal systems.
Lalit Verma
[http://sites.google.com/site/racinsights1]

Unable to start SOA server through Node Manager

Hi All,
I am trying to install AIA 11.1.1.6.0 on the top of SOA Suite 11.1.1.6.0.
I was able to install successfully the weblogic server, rcu, soa and osb servers. Now, before installing the AIA, the document i am following it says, make sure to start the soa server through the node manager.
Now i start the admin server, then the node manager, to make sure i have checked that the node manager is up, i logged in to the weblogic console, went to Machines, and i can see that it is up and reachable.
Now using the WLST commands, first i connected to the node manager using command nmConnect(), then i am trying to start the soa server through node manager using the command start('soa_server1') command.
I am getting an error while trying to start soa server with nmStart() command, below is the error message...
"Error starting server soa_server1: weblogic.nodemanager.NMException: Exception while starting server 'soa_server1'"
I executed the dumpStack() command, and i am getting the output as "No stack trace available"
If i am able to start the soa server through the node manager, i can go ahead and install the AIA pack but this is not letting me go forward.
I also tried to start the soa server through the weblogic console., go to servers tab, select the soa_server1 and start, the soa server state is going to "FAILED_NOT_RESTARTABLE".
I followed some of the blogs like...
http://neeraj-soa-tips.blogspot.com/2010/06/starting-admin-and-managed-servers.html
http://www.javamonamour.org/2011/09/nmconnect-nmstart-nmkill.html
Experts, please give your advice.
Many Thanks,
N

Hi Narsing,
I'm assuming that you've followed the required Pre-config steps. If it is not working, I'd suggest to start the Admin and SOA server without node manager first. Then start your node manager and see if it is reachable from the WLS console. Then shut down your SOA server from command prompt and restart your SOA server from WLS console.
Verify the Listen Address of your Node Manager and start your node manager from command prompt by explicitly specifying the same address and port.
As WLS console internally uses node manager only to start your server, you would not need to use WLST scripts to do the same and only SOA server needs to be started using node manager.
Regards,
Neeraj Sehgal
Hi Neeraj,
I made sure that in the weblogic console, in the machines tab, local machine-->configuration--->Node Manager, I have given the correct Listen Address (Narsing-PC) and the listen port 5556.
I have made sure the property StartScriptEnabled= true.
I have started the admin server through startWebLogic.cmd command, now i start the node manager by going to the C:\Oracle\Middleware\wlserver_10.3\server\bin and running the command startNodeManager.cmd, then i go to the weblogic console--->servers--->control--->soa_server1--->start , it is going to      FAILED_NOT_RESTARTABLE status.
If i see the log messages in the nodemanager.log, this is the below message...
<Jun 28, 2012 11:25:09 PM> <INFO> <soa_domain> <soa_server1> <Server output log file is 'C:\Oracle\Middleware\user_projects\domains\soa_domain\servers\soa_server1\logs\soa_server1.out'>
<Jun 28, 2012 11:25:11 PM> <INFO> <soa_domain> <soa_server1> <Server failed during startup so will not be restarted>
<Jun 28, 2012 11:25:11 PM> <WARNING> <Exception while starting server 'soa_server1'>
java.io.IOException: Server failed to start up. See server output log for more details.
     at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServerManager.java:196)
     at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23)
     at weblogic.nodemanager.server.Handler.handleStart(Handler.java:609)
     at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:121)
     at weblogic.nodemanager.server.Handler.run(Handler.java:71)
     at java.lang.Thread.run(Thread.java:662)
The log message in the soa_server1.out file is as below...
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=soa_server1 -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=C:\Oracle\Middleware\user_projects\domains\soa_domain\servers\soa_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\servers\soa_server1 -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\servers\soa_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.common.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -Doracle.security.jps.policy.migration.validate.principal=false -da:org.apache.xmlbeans... -Dbpm.enabled=true -Dsoa.archives.dir=C:\Oracle\Middleware\Oracle_SOA1\soa -Dsoa.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1 -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks -Dem.oracle.home=C:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dbam.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dums.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://localhost:7001 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe180\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_adfr1111\profiles\default\sysext_manifest_classpath weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
<Jun 28, 2012 11:25:11 PM> <FINEST> <NodeManager> <Waiting for the process to die: 4808>
<Jun 28, 2012 11:25:11 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Jun 28, 2012 11:25:11 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Someone please help, if i am able to start the soa manged server, i can go ahead and install the AIA Foundation pack...
Many Thanks.

Unable to start up in "Single User Mode."

I am on an Intel Mac Pro. I can't seem to start up in the Single User Mode.
I hold down the Command and S keys during startup, but always get to my regular screen, logged in to my account. I changed the login options from automatic to off, but the same thing still happens. Any help would be appreciated.

Hi
Have you possibly set yourself a firmware password? Further instructions here:
http://support.apple.com/kb/ht1352
Tony

How to clone RAC Instance to Single Node Instance??

Hi
I have a Multi Node R12.0.4 Installation based on RAC, and i want to clone all the application on Multi Node but on single database.
Can any one guide me how to performe this??
Thanks
Mohamed

Hi;
In addition to Hussein Sawwan great post also check
RAC -> NON RAC ebiz clone << this post for r11 but i belive it applicable for R12 too
Hope it helps
Regard
Helios

Coherence 3.5 - slow start for a single node

EDIT - wrong forum
Edited by: user10613309 on 30-Jul-2009 02:42

Hi Tim,
The only parameter that controls the delay for the very first cluster member is the "join-timeout-milliseconds" element (http://wiki.tangosol.com/display/COH35UG/multicast-listener). I don't think any of the default values change in 3.5, but the value differs dramatically between the evaluation and development modes (3 sec) and the production mode (30 sec)
Regards,
Gene

How to start Single Node of Exadata 1/2 Rack

Recently while working on 1/2 Rack of Exadata, one of the node went down. My other nodes are working fine.
Heavy ETL processes are running i don't want to stop them in between, but i want to start up the node which is down.
How can i do so? How can i startup single node of Exadata without bringing down other nodes?

logically ( via ilom ) or physically press the power button. If the node is fine it will come up and join the cluster... and it will start serving requests. Its that simple...
Since crs is enabled it would automatically bring up all required resources during the boot process.
Edited by: robinsc on Jul 18, 2012 2:15 PM

How to start CRS and other services after rebooting nodes.

Hi,
i have created two node cluster database.how to start CRS and other service after rebooting nodes?
Thanks,

use crsctl command start...
$ORA_CRS_HOME/bin/crsctl start crsOr check status about CLusterware...
$ORA_CRS_HOME/bin/crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthyIf not OK... check log at $ORA_CRS_HOME/log/hostname/*
and check status database , service and etc...
use crs_stat
$ORA_CRS_HOME/bin/crs_stat -t
$ORA_CRS_HOME/bin/crs_stat if you find some service or instance ... not online...
use srvctl command, help to start
Get Help...
$ORA_CRS_HOME/bin/srvctl -h

2-node RAC - unable to start ora.orcl.orcl1.inst - Please help.

linux1-> crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE linux1
ora....X1.lsnr application ONLINE ONLINE linux1
ora.linux1.gsd application ONLINE ONLINE linux1
ora.linux1.ons application ONLINE ONLINE linux1
ora.linux1.vip application ONLINE ONLINE linux1
ora....SM2.asm application ONLINE ONLINE linux2
ora....X2.lsnr application ONLINE ONLINE linux2
ora.linux2.gsd application ONLINE ONLINE linux2
ora.linux2.ons application ONLINE ONLINE linux2
ora.linux2.vip application ONLINE ONLINE linux2
ora.orcl.db application ONLINE ONLINE linux1
ora....l1.inst application ONLINE OFFLINE
ora....l2.inst application ONLINE ONLINE linux2
ora....test.cs application ONLINE ONLINE linux2
ora....cl1.srv application ONLINE OFFLINE
ora....cl2.srv application ONLINE ONLINE linux2
linux1->
linux1-> crs_start ora.orcl.orcl1.inst
Attempting to start `ora.orcl.orcl1.inst` on member `linux1`
Start of `ora.orcl.orcl1.inst` on member `linux1` failed.
linux2 : CRS-1018: Resource ora.linux1.vip (application) is already running on linux1
CRS-0215: Could not start resource 'ora.orcl.orcl1.inst'.
linux1->crs_start ora.orcl.orcl1.inst
PRKP-1001 : Error starting instance orcl1 on node linux1
CRS-0215: Could not start resource 'ora.orcl.orcl1.inst'.
stopped all the services one by one
crs_stop XXXX
crs_stop XXXX
Again started all the services in sequence order like asm, instance, listener, database. but no use
Even stopped the as root stopped crs itself
#./crsctl stop crs
started back using
#./crsctl start crs
Please help.
Thanks in advance

[cssd(5771)]CRS-1605:CSSD voting file is online: /u02/oradata/orcl/VotingFile_Mirror1. Details in /u01/app/oracle/product/crs/log/linux1/cssd/ocssd.log.
2010-02-16 18:55:15.398
[cssd(5772)]CRS-1605:CSSD voting file is online: /u02/oradata/orcl/VotingFile_Mirror2. Details in /u01/app/oracle/product/crs/log/linux1/cssd/ocssd.log.
2010-02-16 18:55:19.311
[cssd(5919)]CRS-1601:CSSD Reconfiguration complete. Active nodes are linux1 linux2 .
2010-02-16 18:55:19.877
[crsd(4275)]CRS-1012:The OCR service started on node linux1.
2010-02-16 18:55:19.957
[evmd(5582)]CRS-1401:EVMD started on node linux1.
2010-02-16 18:55:21.728
[crsd(4275)]CRS-1201:CRSD started on node linux1.
2010-02-16 19:13:03.006
[cssd(5833)]CRS-1603:CSSD on node linux1 shutdown by user.
2010-02-16 19:15:40.379
[cssd(14888)]CRS-1605:CSSD voting file is online: /u02/oradata/orcl/VotingFile. Details in /u01/app/oracle/product/crs/log/linux1/cssd/ocssd.log.
2010-02-16 19:15:40.404
[cssd(14889)]CRS-1605:CSSD voting file is online: /u02/oradata/orcl/VotingFile_Mirror1. Details in /u01/app/oracle/product/crs/log/linux1/cssd/ocssd.log.
2010-02-16 19:15:40.404
[cssd(14890)]CRS-1605:CSSD voting file is online: /u02/oradata/orcl/VotingFile_Mirror2. Details in /u01/app/oracle/product/crs/log/linux1/cssd/ocssd.log.
2010-02-16 19:15:44.567
[cssd(15060)]CRS-1601:CSSD Reconfiguration complete. Active nodes are linux1 linux2 .
2010-02-16 19:15:45.125
[crsd(14066)]CRS-1012:The OCR service started on node linux1.
2010-02-16 19:15:45.196
[evmd(14708)]CRS-1401:EVMD started on node linux1.
2010-02-16 19:15:46.353
[crsd(14066)]CRS-1201:CRSD started on node linux1.

Can there be multiple ASM instances on single node?

Hi,
Can there be multiple ASM instances on single node?
This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
Thanks in advance.
Thanks,
Harsha
Edited by: user498756 on Sep 11, 2008 2:23 AM

...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
Again - I cannot think of a good reason to do so though!
-Bob

Unable to start crs on single-node instance

Similar Messages

Maybe you are looking for