Unable to switch 3G back on

I switched off my 3G on my iPhone 3GS to save battery. Now it won't come back on. I don't think it's a carrier problem as I'm getting 3G ok on my iPad. Any solutions? Tq!

Try a different charger. If that doesn't work, hold down the home and power buttons down at the same time for 10 seconds while the iPod is on the charger and see if it shows any signs of life. If none of the above work, you should set up a Genius Bar appointment at your locla Apple store. If you don't have a local Apple Store, you should call Apple customer support to get a replacement iPod.

Similar Messages

I have an apple ipod. it has a drained battery and i have been unable to switch it back on. i have plugged it in to charge but its more dead than a dodo. can anyone help?

Help!
My kids IPOD touch has a drained battery. Usually I charge it and all is rosey. Not this time its showing no signs of life at all. Does anyone have any ideas please? Many thanks

Try a different charger. If that doesn't work, hold down the home and power buttons down at the same time for 10 seconds while the iPod is on the charger and see if it shows any signs of life. If none of the above work, you should set up a Genius Bar appointment at your locla Apple store. If you don't have a local Apple Store, you should call Apple customer support to get a replacement iPod.

Unable to switch Central System Administration into Change Mode

Hi,
I am bit rusty on the Solution Manager - Central System Administration.
While experimenting with my Solman system I did the following.
1. Logged into Solman and started transaction Solution_Manager
2. Switched to the Solution that has been configured and then followed Operations Setup->Solution Monitoring -> System Administration -> Central System Administration for <My System> (here my system is the system I wish to monitor).
3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
4. After this action of selecting the Complete session from the menu, my Central System Administration for <My System> is continuously showing Display Mode.
I am unable to switch back the system to Change Mode.
Am I missing something ? What needs to be done ?
Regards,
Siddhesh

Siddhesh Ghag wrote:>
>
> 3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
>
> Regards,
> Siddhesh
This was the wrong step. By setting the Session Component to "Complete", no further changes are allowed (and you receive a pop-up).
The procedure to reopen the session component is not documented for customers. Please create a customer message on SV-SMG-MON-CSA, open the service connection and provide logon information.
You might state my name in the message, I will then assist the message processor.
Best regards,
Ruediger Stoecker

My iPhone 4 has switched off for no reason , and now I am unable to switch this on again ??? if anybody has a answer about how I could reboot it , he's welcome, many thanks .

my iPhone 4 has switched off for no reason, and now I am unable to switch this on again???if anybody could help about a reboot tip , he's welcome, many thanks...

1. On your iPhone 4 press and hold both the button and the Home button for about ten seconds. After ten seconds you should see the Apple logo showing up.
2. Now try to run you phone again and see if it works.
If a hard reset the still can't get the device back to a working order.
1. Plug in the device to the cumputer and start iTunes.
2. Press and hold the Sleep/Wake + Home for 10 seconds.
3. Once you see the Apple Logo appears, release the power and continue to hold down the home button for about 5-10 seconds. Look iniTunes and see if your device have shows up.
4. iTunes will notify you that you are now in Recovery mode. Click on OK to continue with the restore process.
5. Next press and hold on the SHIFT button and click on the Restore button. Select the latest IPSW file and the prompt appears.
6. iTunes should now attempt to get your device back to the manufacturer setting.
7. iTunes will later give you an opportunity to restore you content from the PC. Every time when you do a sync, iTunes makes a backup so you can choose the latest backup from the sync.

TS3432 unable to switch between applivations in ipod touch 4

unable to switch between applivations in ipod touch 4.How to.clicking twice homw botton doesnt help.

If you have a 2G iPod, that model does not support mutlitasking and thus ther is not double clicking the Home button.
A 2G can only go to 4.2.1
To identify yours:
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Iam unable to switch using the stop button in IPOD

whenever a song/video is played iam unable to switch off the IPDOD but if press the menu button for some 6 seconds and then press the hold button iam able to switch off.If the song/video is not played then if i press the hold button iam able to switch off without any problem.

When a song is NOT playing, press and hold the Play/Pause button. THis is how you shut off the iPod. Then, you can engage the Hold switch to ensure you don't accidentally turn it back on.
CHeers
!-Bryan

My iphone 4 unable to switch on

my iphone 4 automatically switch off and unable to switch on.

Do a reset hold down the home/sleep button until you see the apple logo and then release, then wait for the phone to boot back up.

New out of box , unable to switch on is there a problem with the battery as i thopugh it should be partly charged.

new out of box , unable to switch on is there a problem with the battery as i thopugh it should be partly charged.

Plug it in for 15 minutes. If it doesn't come on hold the HOME button (the round one) and the SLEEP button (the one on the top) at the same time until an Apple logo appears (about 10 seconds). If nothing appears on the screen after 30 seconds you have a dead phone; take it back for exchange.

My fiance logged onto my iphone with his apple ID and now I can't switch it back to my username. How can I change it back to mine? ( but when I go to setting,icloud my un/pw are there)

My fiance logged into my iphone with his apple ID and now I can't switch it back to my username. When I go to buy an app his username is in an editable format to beable to change it back to mine. How can I change it back to mine? (when I go to setting,icloud my un/pw are there) Can someone please help? Thanks!

Had you looked in the User Guide, you would have found this: Settings>Store. Tap on AppleID to change.

Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order.

Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order. This onloy seems to happen when I double-click on the song to play it in itunes. If I just hit play, this doesnt happen. As a result, I have several albums now in which the songs are in the wrong order. Its very frustrating, as this error then transfers over to my ipod every time I sync it. When I choose the info. for the songs, it has them correctly listed (i.e., it lists the songs as being #1 of 19 on the CD, for example). But then the song will have placed by Itunes as #5 of 19 for whatever reason. Itunes does not do this every time, but does it with enough frequency to be maddening. Any thoughts?

The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck.

Unable to create temporary backing file

My program is throwing out the error:
temporary open: /var/tmp/BDB20825: Too many open files
unable to create temporary backing file
This happens after my program has been running for about 4 hours. The program appears to run out of file descriptors. The listing of /proc/<PID>/fd shows hundreds of lines naming the same file (/var/tmp/BDB20825), like this:
lrwx------ 1 zobell users 64 Jul 28 14:41 622 -> /var/tmp/BDB20825 (deleted)
That file does not exist. I suspect that someone is deleting but failing to close the file. A few open file descriptors with this deleted file occur slowly in the early hours, but not at a fast enough rate to bring the program down when it does. It looks like there is a sudden flood at the end.
The program repeats this error slowly, and is stuck inside the db code. Here is the gdb backtrace I am seeing every time I interrupt:
(gdb) where
#0 0x00e74410 in __kernel_vsyscall ()
#1 0x003d51dd in ___newselect_nocancel () from /lib/libc.so.6
#2 0x002e5d39 in __os_sleep () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#3 0x002e43f1 in __os_openhandle () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#4 0x002e52ad in __os_open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#5 0x002c0357 in __db_tmp_open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#6 0x002c006c in __db_appname () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#7 0x002d50c9 in __memp_bhwrite () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#8 0x002d4a27 in __memp_alloc () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#9 0x002d62ec in __memp_fget () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#10 0x00232003 in __bam_new_file () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#11 0x002abc79 in __db_new_file () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#12 0x002abaff in __db_open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#13 0x002a5d15 in __db_open_pp () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb-4.6.so
#14 0x0080644c in Db::open () from /devel/tfm/external/RH4_32/dbxml/latest/install/lib/libdb_cxx-4.6.so
#15 0x0053ebbe in DbXml::DbWrapper::open (this=0x405bbee0, txn=0x0, type=DB_BTREE, flags=65537, mode=0) at Transaction.hpp:62
#16 0x00549247 in CacheDatabase (this=0x405bbed8, env=0x9c5a848, type=DB_BTREE, compare=0) at CacheDatabase.cpp:28
#17 0x005497e2 in DocDatabase (this=0x405bbed8, env=0x9c5a848, compare=0) at CacheDatabase.cpp:46
#18 0x00584ced in DbXml::Manager::createDocDatabase (this=0x9c5a830, compare=0) at Manager.cpp:694
#19 0x00519467 in DbXml::CacheDatabaseMinderImpl::verify (this=0xfffffdfe, entry=@0x6ac2f790, cid=-514) at CacheDatabaseMinder.hpp:31
#20 0x00519398 in DbXml::CacheDatabaseMinderImpl::findOrAllocate (this=0x6ac5b4f0, cid=1, allocate=true) at CacheDatabaseMinder.cpp:71
#21 0x00518e59 in DbXml::CacheDatabaseMinder::findOrAllocate (this=0x6acd9fa0, mgr=@0x9c5a830, cid=1, allocate=true) at CacheDatabaseMinder.cpp:21
#22 0x0055b12d in LazyDIResults (this=0x6acd9f98, context=0x6acd9fa0, contextItem=0x4979abc0, expr=@0x9ce5de8, txn=0x0, flags=0) at /devel/tfm/developers/szobell/berkeley-db-xml/dbxml-2.4.16/dbxml/include/dbxml/XmlManager.hpp:80
#23 0x0052f9cd in DbXml::QueryExpression::execute (this=0x9ce5de8, txn=0x0, contextItem=0x4979abc0, context=@0xbfcb0e04, flags=0) at /devel/tfm/developers/szobell/berkeley-db-xml/dbxml-2.4.16/dbxml/include/dbxml/XmlQueryContext.hpp:86
#24 0x00565a3a in DbXml::XmlQueryExpression::execute (this=0x0, contextItem=@0xfffffdfe, context=@0xbfcb0e04, flags=4294966782) at /devel/tfm/developers/szobell/berkeley-db-xml/dbxml-2.4.16/dbxml/include/dbxml/XmlValue.hpp:186
#25 0x0805af4b in XmlRecordWithCounts::ExtractQueryString (this=0xbfcb0dd0, select=@0xbfcb0e2c, result=@0xbfcac1d0, qDocument=0xbfcb0e14) at src/XmlRecordWithCounts.cpp:401
#26 0x080585f6 in OdRecord::GetRequiredContent (this=0xbfcb0dd0, name=@0xbfcac1e0, origin=@0xbfcac1d0, dest=@0xbfcac1c0, type=@0xbfcac1b0, dist=@0xbfcac198, totalCount=@0xbfcac194, route=@0xbfcac1a0, qDocument=0x0) at src/OdRecord.cpp:143
#27 0x0804d9c3 in ProcessOd (fpPrivate=0x8e11098, odDb=@0xbfcb0dd0, fdDb=@0xbfcb0d20) at src/BuildFdDb.cpp:263
#28 0x0804f4c8 in ProcessOneDest (fpPrivate=0x8e11098, odDb=@0xbfcb0dd0, fdDb=@0xbfcb0d20, dest={static npos = 4294967295, _M_dataplus = {<std::allocator<char>> = {<No data fields>}, Mp = 0x9da758c "LAX"}, static Sempty_rep_storage = {0, 0, 69041, 0}}) at src/BuildFdDb.cpp:464
#29 0x080501cd in main (argc=6, argv=0xbfcb10c4) at src/BuildFdDb.cpp:589
At this time, the program is trying to extract fields out of an XmlDocument that is the result of a query. The program uses a pre-calculated XmlQueryExpression to extract a specific field. This may not be the best way to extract a field from a document, given the apparent overhead of needing a temporary file!
My program queries two database files (OD.dbxml and FD.dbxml.new), and uses the information to add records to the second file. The databases are rather big:
bash-3.2$ ls -l /tmp/*dbxml*
-rw-rw---- 1 zobell users 5233745920 Jul 28 14:42 /tmp/FD.dbxml.new
-rw-rw---- 1 zobell users 6539427840 Jul 13 10:16 /tmp/OD.dbxml
(I keep them in /tmp because everywhere else uses NFS and performance is awful with NFS.)
My environment:
Red Hat Enterprise Linux Client release 5.3 (Tikanga) 32 bit.
Berkeley DB XML 2.4.16, C++ interface.
Disk space should not be an issue:
bash-3.2$ df /tmp /var
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-tmp
28948572 13044384 14409968 48% /tmp
/dev/mapper/VolGroup00-root
144742920 5333544 131938272 4% /
I ran this program about a year ago and did not see this issue. I have made a few changes and linked to the newer version of the XML database since then. Any help is appreciated.

I have more information about this problem.
If I "disable" the routine __os_zerofill() in os_fzero.c, by having it always return (0), I no longer get an exception and my application appears to run smoothly. However, I have not determined what in this routine leads to the exception. And, I have no idea what the short and long term consequences of "disabling" this routine will be....
-Coralie

HT204347 My MacBook Pro shut of three times yesterday after plugging my phone in but I managed to switch it back on each time. I left it to rest for about 20 hours and then today it Has been working fine

My MacBook Pro shut off three times yesterday after plugging my phone in but I managed to switch it back on each time. I left it to rest for about 20 hours and then today it Has been working fine all morning. Using indesign and Skype which usually slow it down anyway but it's been fine. Then I plugged my iPhone 4S into it and it just shut off again. But this time it won't switch back on. No idea why this has happened but I hadn't saved my work either. I'd not long plugged the charger in to it but now, it's still plugged in, but the light on it is very dim and is just flashing.
No idea what to do. Please help!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

After upgrading from iOS 7.1.2 to iOS8 on my iphone5, i am unable to switch 2G/3G.

After upgrading from iOS 7.1.2 to iOS8 on my iphone5, i am unable to switch 2G/3G, i think apple has removed that toggle. Poor 3G range is here in india-Pune. Requesting Apple Dev. Team to do the needful asap.

ios 8 *****. i am unable to switch 2G to 3G while it eating my battery. *****

HT1414 i am unable to switch on the wifi on my iPhone 4s? I have tried all of the above ways.

I am unable to switch on the wifi on my iPhone 4s.
I have tried restart, restore, update etc.
But its still not working.
Please help

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

The awesome bar used to be set to goole, but now it's set to bing. how do I switch it back?

when i used the awesome bar it always used google as its browser. but now, it has somehow switched to bing. I personally, like google, and I'd like to know how to switch it back. can you help me?
P.S. its not because of a update to firefox. because it only happened about a week ago, and firefox 4 came out before then.

You can modify the pref keyword.URL on the about:config page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
* [[Removing the Search Helper Extension and Bing Bar]]

Unable to switch 3G back on

Similar Messages

Maybe you are looking for