Unable to switch Central System Administration into Change Mode

Hi,
I am bit rusty on the Solution Manager - Central System Administration.
While experimenting with my Solman system I did the following.
1. Logged into Solman and started transaction Solution_Manager
2. Switched to the Solution that has been configured and then followed Operations Setup->Solution Monitoring -> System Administration -> Central System Administration for <My System> (here my system is the system I wish to monitor).
3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
4. After this action of selecting the Complete session from the menu, my Central System Administration for <My System> is continuously showing Display Mode.
I am unable to switch back the system to Change Mode.
Am I missing something ? What needs to be done ?
Regards,
Siddhesh

Siddhesh Ghag wrote:>
>
> 3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
>
> Regards,
> Siddhesh
This was the wrong step. By setting the Session Component to "Complete", no further changes are allowed (and you receive a pop-up).
The procedure to reopen the session component is not documented for customers. Please create a customer message on SV-SMG-MON-CSA, open the service connection and provide logon information.
You might state my name in the message, I will then assist the message processor.
Best regards,
Ruediger Stoecker

Similar Messages

Not able to find Central System Administration

Hi,
We are trying to configure the Central System Administration in our Soultion Manager version 4.0 for the Development server running on ECC 6.0.
We have created systems, generated RFC's, defined logical system and and also created Solution Landscape for the Development Server in the Solution Manager System.
But when we go to the transaction DSWP>Eneter the Development Solution Landscape>Solution Minitoring>System Monitoring/ Administration>Operation Setup, We rae unable to find the Central System Administration configure icon.
Please suggest the possible reason for this and a way to view the Central System Administraion configure Icon.
Thanks and Regards,
Abdul Khyoom A.

Hi Abdul,
CSA Setup should be visible via this path:
- dswp
- open solution landscape
- choose Operations Setup -> Solution Monitoring -> System Administration
- here you should see for each system in the Landscape an entry for: Central System Administration
What's the Support Package Level of you SolMan system?
Best regards,
Ruediger

Central System Administration - Monitoring question

We are trying to setup the Central System Administration/Monitoring in solution manager. However, when we go into the setup of the tasks, such as "Checking for ABAP Short Dumps", when we click on the "Start ST22" button, it doesn't do anything.
Has anyone had an experience with figuring out how to get those buttons to work and to connect directly into the system we are doing the task?
We did follow Note 128447 to setup the Trusted RFC's between the systems, but that doesn't seem to working correctly either. Could that be the reason that this isn't working correctly?
Thanks in advance for any replies.
Dale Dingmann

Hi,
May I know how did you configure your CEN monitoring, using agents, or using RFC.
And where you are checking the ABAP dumps on Workcenter?? will you able to get the other details like Job failure, if you click that, wil you able to reach the satellite system.
and check below are available.
SM_<SID>CLNT100_READ
SM_<SID>CLNT100_TWM
SM_<SID>CLNT100_TRUSTED
if you use RFC monitoring these 2 also required,
<SID of the monitored_system>_RZ20_COLLECT
<SID of the monitored system>_RZ20_ANALYZE
Thanks,
Jansi

Mail a Central System Administration report

Hi,
We are started with the configuration of the CSA (Central System Administration) on Solution Manager.
Each check session is available on a HTML and/or MSWord report.
Now I want to mail these report to a mailbox on a regular basis.
I wonder if that is possible.
I cannot find any information about that.
The SAPConnect (SCOT) is well configured.
Hope somebody can help me out
Thanks
Paul

Did you ever get this working? Also have you found a way to combine CSA reports from multiple systems into one report perhaps?

Solution Manager - Central System Administration - Task list is wrong

Hi,
Solution manager 7.0 EHP1, System monitoring, Central system administration I have copied another customizing session,
updated task list but strange mixed list of tasks appeared: some tasks are visible even they do not exist in new one.
Thanks for help.
Dalibor

>
Dalibor Cip wrote:
> Hi,
> Solution manager 7.0 EHP1, System monitoring, Central system administration I have copied another customizing session,
> updated task list but strange mixed list of tasks appeared: some tasks are visible even they do not exist in new one.
> Thanks for help.
> Dalibor
Have you already seen
[SAP Note 1097862 - Incorrect no. of tasks in SAP Solution Manager overview|http://www.service.sap.com/sap/support/notes/1097862]?
It contains also instructions how to fix inconsistencies.
Best regards,
Ruediger

Auto email Transmission for Central system administration

Hi Experts,
I want to setup an auto email transmission for "Central system administration" report in solution manager.
If anyone aware of the process, please guide.
Thanks,
Basis Consultant

Hello,
To setup CSA you will need to perform three important pre-requisites if you already have not done so.
> Create a Solution Landscape
> Setup the RFC connections between Solution Manager and the Satellite systems in your Solution Landscape
> Assign the Solution Monitoring Roles to the users.
In terms of the Automatic Email Notification it is currently not available as a standard functionality.
Thanks,
Mark

Solution Manager: Central system administration

Hi,
We need to configure central system administration in solution manager.
Could you please provide step by step documents.
Regards,
Bala.

Hello Bala,
You should find this link useful [Here|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Hope this information is helpful.
Regards,
Paul

Can Central System administration be configured for JAVA systems?

I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
Can some one tell me, can it be configured for JAVA systems like Portal?
Thanks
Aditya

Hello Aditya
Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

Central System Administration in Workcenter - Remote Logon Issue

Hi,
We have a problem in our Solution Manager and we would like to know if is possible to fix it.
We have configured Central System Administration correctly for our satellite systems. We have configured some tasks and we are able to do remote logon to run some transactions in the stallete systems.
The problem comes in the Workcenter via web. In the workcenter we access to the Central System Administration and when we try to do remote logon to the satellite system nothing happens.
Anyone knows if it is possible to do remote logon to the satellite systems using workcenters?
Thanks,
Roberto

From the transaction SOLMAN_WORKCENTER, navigate to the System Administration tab.
From the menu on the left select the task "Administration Tools".
Select your system from the table on the right
At the bottom of the screen you will see "Details for system <SID>"
Select the client and the RFC from the drop down menu.
You should see a list of Tools for Application Server with corresponding TCODES. If your selected RFC is functioning properly and the user ID specified in the RFC has the correct authorizations you should be able to log on remotely by clicking on the link provided.

Central System Administration

Hi,
I have added all satellite systems to Solution manager .Please tell me the steps to configure Central System Administration in solution manager.
Thanks & Regards
Shashi Singh

Hi,
Check these
https://websmp201.sap-ag.de/~sapidb/011000358700000059822008E
https://websmp201.sap-ag.de/~sapidb/011000358700006932602005E.sim
https://websmp201.sap-ag.de/~sapidb/011000358700000038202008E.sim
https://websmp201.sap-ag.de/~sapidb/011000358700000038182008E.sim
This should solve your problem.
Feel free to revert back.
-=-Ragu

Central system administration (CSA) in solution monitoring

Hello,
I want to configure my solution manager for central system administration (CSA) which is a service provided under solution monitoring of transaction dswp.
I couldnt find any documents for this configuration.
Could you please help me out..
Regards,
Gurudath Pai

Hi Gurudath,
If you have an s-user id, step-by-step tutor files with screenshots are available at
https://service.sap.com/rkt-solman > Solution Manager > Solution Manager 7 > Technology Consultant & System Administrator > System Monitoring, Administration
Before configuring CSA, you have to:
1. Perform basic settings for Solman (use wizard based approach)
2. Setup the system landscape
3. Create solution
4. Now you can configure CSA
Revert if you need clarifications
Prasad

Unable to view invoices and going into enter mode.

Dear all,
Under the Receivables Inquiry responsibility in the AR transaction forms (view invoice).
Unable to view invoices and going into enter mode.
Please help to debug this issue.
Thanks for your help in advance.
With Regards,
Sunil Kumar Mallina.

Please post the details of the application release, database version and OS.
Under the Receivables Inquiry responsibility in the AR transaction forms (view invoice).
Unable to view invoices and going into enter mode. Was this working before? If yes, any changes have been done recently?
Do you get any error? Please elaborate more.
Thanks,
Hussein

Want to modify GR/GI SLIP Field into change mode.new to badi

Hi,
     I want to modify GR/GI SLIP Field into change mode , so my customer can change data whenever he wants.. This field exist in     vl02n transaction.
        Right now it is in disabled mode   .I am new to badi , so please guide me .
Regards,
Ranu.
Edited by: ranu sharma on Nov 4, 2009 8:16 AM

Hi,
Please note this is the client requirement to have the field editable, so please do not convey the edit entires in table to users, this is basically for our reference only,
In this case, you'll have to use the user exits to make the field editable in SAP for users, kindly check the below user exits, and take help of delveloper on the same.
Exit name     Description
SDVFX001     User exit header line in delivery to accounting
V50Q0001     Delivery Monitor: User Exits for Filling Display Fields
V50S0001     User Exits for Delivery Processing
V56TDLIF     Filter Delivery Items for Shipment
Thanks & Regards,
Rahul Verulkar

HT1378 i am unable to put my ipod classic into disk mode. what do i do to reset/restore it?

i am unable to put my ipod classic into disk mode. what do i do to get the red x tto go away and restore my ipod?

imlockedoutofmyiphone wrote:
I have looked at multiple websites; they all have the same instructions for putting your IPhone into recovery mode using ITunes.
My computer was not downloading ITunes before, but I recently made it work. I turned my phone off, held the home button, plugged in the phone to the computer with ITunes already up. The little USB cord and ITunes logo showed up. The instructions said that a popup would say that ITunes had 'detected and IPhone in recovery mode', and from there I would be able to reset my phone. However, the popup never happens. I have tried this several times, and it's the same: I see the USB cable and ITunes logo on my phone screen, and in the corner of ITunes, a picture comes up of a phone with a little 'X' next to it. I clicked on the phone, on the X, but nothing works. The popup just never shows. I am unable to reset my IPhone because of it. I have not found any other way for me to reset my phone, since I didn't activate Find My Phone or ICloud.
There is no icloud on an iphone 3, because you need IOS 5.0 or higher, the highest IOS is 4.2.1

When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in

When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in
and will then boot up again without any errors.
I Have replace RAMS, Motherboard and Power Supply. I have check the Bio's and Power setting on the unit. there is no place to cause this issue.
Please help
PC Power Tech

Syamak,
You didn’t specify where the beeping noise is coming from.
If it’s coming through your speakers, you could try to update your audio drivers since it’s possible they’re incorrectly sending a signal to the speakers as the audio chipset enters standby.
If the noise is coming from the motherboard, you’ll need to take a closer look at your system’s configuration or contact the manufacturer.
I hope this helps.
Mike
Windows Outreach Team – IT Pro

Unable to switch Central System Administration into Change Mode

Similar Messages

Maybe you are looking for