EXE built in XP crashing in Windows 7

Hi Ppl,
I have an application built in Windows XP Service Pack 3. When we tried running it in Windows 7 station it crashed before opening up the front panel and below is the crash details. However if we built the application in the Windows 7 station itself it works fine. I tried running the application in compatability mode, it didn help. The error message points to a dll in the run time engine. The DLL was located in the correct location as expected.
I'm using LabVIEW-2010 SP
  Problem Event Name:APPCRASH
  Application Name:Application.exe
  Application Version:0.0.0.1
  Application Timestamp:4c24e8f5
  Fault Module Name:libappweb.dll
  Fault Module Version:2.4.0.49156
  Fault Module Timestamp:4c212a85
  Exception Code:c0000005
  Exception Offset:0001ba4c
  OS Version:6.1.7600.2.0.0.256.1
  Locale ID:16393
  Additional Information 1:0a9e
  Additional Information 2:0a9e372d3b4ad19135b953a78882e789
  Additional Information 3:0a9e
  Additional Information 4:0a9e372d3b4ad19135b953a78882e789
Thanks,
Sathish

Hello,
The solution would be in the following links:
http://blogs.technet.com/b/askperf/archive/2008/06/17/to-dep-or-not-to-dep.aspx
http://digital.ni.com/public.nsf/allkb/D12F9263065435DA8625784F006ECFD4?OpenDocument
Please revert back if the problem is not solved.
Regards,
Sahil Singla
Applications Engineer | National Instruments
(Give Kudos to good Answers and Mark it as a Solution if your problem is Solved)

Similar Messages

  • HT5925 AppleIEDAV.exe crashes everytime Windows 7 64 bit opens

    AppleIEDAV.exe crashes everytime Windows 7 64 bit opens. Any ideas?
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: AppleIEDAV.exe
    Application Version: 1.2.12.0
    Application Timestamp: 52867716
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.1.7601.18247
    Fault Module Timestamp: 521ea8e7
    Exception Code: c0000005
    Exception Offset: 0002e41b
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    This just started to happen. I'm using IE 11. Of course.. Safari is dead.
    Thank you!

    Remove or uncheck Bookmarks in your iCloud control panel. That is what is causing most of the problems. At least that is what I've been able to gleen from reading other posts here in the forum.

  • Application crashes in Windows 7 64bit made in Labview 2010 sp1 f2 with Fault module name%3A lvrt.dll%2C version 10.0.0.4033 and exception code c0000005

    I build an application exe and then its installer along with run time environment.
    The installers instals the application correctly but when I try to execute the application, I get an error that application has crashed and Windows must close it down or search for solutions online with this additional information for the crash. 
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: AGMS.exe
    Application Version: 1.3.0.0
    Application Timestamp: 4c24e8f5
    Fault Module Name: lvrt.dll
    Fault Module Version: 10.0.0.4033
    Fault Module Timestamp: 4c9273f4
    Exception Code: c0000005
    Exception Offset: 00005310
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    I am using labview 2010 sp1 32 bit on a 64-bit machine, with the following specs
    Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Inc.
    System Model: Dell System XPS L502X
    BIOS: Default System BIOS
    Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
    Memory: 8192MB RAM
    Available OS Memory: 8106MB RAM
    Page File: 3457MB used, 12753MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7601.17514 32bit Unicode
    The exe /application runs fine on my PC but when I try to run it on another PC it crashes. The other PC has similar specs as given below
    Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
    Language: English (Regional Setting: English)
    System Manufacturer: LENOVO
    System Model: HuronRiver Platform
    BIOS: Default System BIOS
    Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (4 CPUs), ~2.2GHz
    Memory: 4096MB RAM
    Available OS Memory: 4010MB RAM
    Page File: 1359MB used, 6658MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7601.17514 32bit Unicode
    I tried another machine, 64 bit of course, as I want to deploy my application on a 64bit PC, but still got the same problem.
    This other machine was from HP, iCore 3 (4 CPUs) 2.2GHz, 4GB RAM and running Windows Professional 64 bit.
    Now as I see it, it could be a Run-time environment mis-match error.
    For this I tried installing a 64 bit LVRTE from NI, but still no sucess.
    I checked DEP, for all 3 PCs and it was set to the following
    Turn on DEP for essential Windows programs and services only (first option).
    I am confused. I can not find a solution for this and it is really frustrating.

    But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
    Since from the picture you can see its including the support installers from '\Program Files (x86)\'
    The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
    I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
    Yes I did reboot every time after I ran the installation.
    Still getting the same error.

  • Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.

    Team,
    Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.
    I have tired.
    1. Updating Intel Graphics Card. (unsuccessful)
    2. Logging in and out of creative cloud. (unsuccessful)
    See log below.
    Faulting application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba
    Faulting module name: ntdll.dll, version: 6.3.9600.17278, time stamp: 0x53eebd22
    Exception code: 0xc0000005
    Fault offset: 0x0000000000024ac8
    Faulting process ID: 0x1448
    Faulting application start time: 0x01cfe6c7bd37e765
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
    Faulting module path: C:\windows\SYSTEM32\ntdll.dll
    Report ID: 072b7ff9-52bb-11e4-825f-600292e27add
    Faulting package full name:
    Faulting package-relative application ID:

    Well it came installed on my brand new Windows 8 pro w530 I received 4 weeks ago and has never worked. When you try to open power manager it just crashes. If you uninstall it the Lenovo software just keep reinstalling it. If you uninstall the Lenovo PM driver but do not reboot you can then open Power Manager. The minute you reboot the Lenovo software reinstallls the driver. 
    Why would Lenovo install software on a brand new Windows 8 laptop that is broken and useless? Tech support is absolutely no help they transfer you to the software department which wants to charge you to fix a problem that Lenovo created!!! It is crazy!! I was hoping someone here could solve this problem or maybe someone at Lenovo would see this and get the problem resolved. Tech support has been useless. I reported the problem to them at least 5 times.

  • Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

    Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

    Windows reports that Safari stopped working . Windows Task Manager shows webkit2webprocess.exe  process still running even after I respond to Windows prompt and close Safari ( Safari continues running after this action )

  • PlayMemories Crashes on Windows 8.1 64 Bit

     PlayMemories is crashing on Windows 8.1 64 Bit. It crashes as soon as I start it up, with "Browser Stopped Wiorking".
    From Windows Event Log:
    Faulting application name: PMBBrowser.exe, version: 9.2.0.2052, time stamp: 0x54d349d3
    Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2be1e
    Exception code: 0x40000015
    Fault offset: 0x0008d6fd
    Faulting process id: 0x352c
    Faulting application start time: 0x01d051e3319a6d63
    Faulting application path: C:\Program Files (x86)\Sony\PlayMemories Home\PMBBrowser.exe
    Faulting module path: C:\Windows\SYSTEM32\MSVCR100.dll
    Report Id: 70ec99c0-bdd6-11e4-826d-8086f23f5dda
    Faulting package full name:
    Faulting package-relative application ID:
    This is the only application I'm having trouble with. The error occurrs as soon as the software starts up.
    How do I fix this?
    The problem with using Explorer to copy the files from the camera disc is that the raw files are in a format that
    my movie making/DVD burning software doesn't recognize.  Using PMB on my older computer isn't really an option, because the files are big and hard to transfer to this computer. Is there any other way to import movies from the camera onto my computer?

    Hi,
    This particular question pertain to Windows 10 Preview. Please post your question on this link
    http://answers.microsoft.com/en-us/windows/forum/windows_tp?auth=1.
    So that experts will be able to help you better.
    Regards,
    Bharath

  • Forms Builder 10.1.2.3 Crash in Windows 7

    Followed the installation steps mentioned in metalink note: 559067.1 [How to Install Developer Suite 10.1.2.3 on Windows Vista or Windows 7 ].
    Followed the installation steps till point 7.
    After the installation when I tried opening the forms builder (ORACLE_HOME/BIN\frmbld.exe) it immediately crash after oracle logo with the error message "Oracle Forms Designed had stopped working"
    Machine details:
    Windows 7 Ultimate 64bit
    Macbookpro 2012
    This is urgent. Any quick help is highly appreciated.
    Thanks
    Lakshmanan AK

    I've installed Oracle Developer Suite (ODS) 10g R2 on numerous Windows 7 systems and have only encountered an issue with Forms Builder crashing a couple of times. Each time, I've been able to resolve the problem by modifying the OS PATH environment variable to ensure there is not a conflict between Oracle versions. If you only have ODS 10g installed, this should not be a problem, but if you have different versions of Forms installed - this could very well be the problem. My you might want to take a look at the OS PATH and make sure all Windows related directories are listed first. Then list the ODS directories second and lastly, list everything else. Oracle has a bad habit of putting it's program directories before the operating system directories.
    It is also possible that your installation media is bad since your install is crashing in Windows XP mode as well. That being the case, you may want to download the installer again.
    Craig...

  • ITunes 11 crash on Windows 7

    Hello,
    since the update of iTunes to v.11. my iTunes is crashing sporadic after between 1 min and 60 min.
    I get the follow message in the Windows Event log for Applications:
    Protokollname: Application
    Quelle:        Application Error
    Datum:         07.12.2012 23:46:14
    Ereignis-ID:   1000
    Aufgabenkategorie:(100)
    Ebene:         Fehler
    Schlüsselwörter:Klassisch
    Benutzer:      Nicht zutreffend
    Computer:      Nico-PC
    Beschreibung:
    Name der fehlerhaften Anwendung: iTunes.exe, Version: 11.0.0.163, Zeitstempel: 0x50b71fed
    Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.1.7601.17932, Zeitstempel: 0x50327672
    Ausnahmecode: 0x80000003
    Fehleroffset: 0x00013219
    ID des fehlerhaften Prozesses: 0x2dec
    Startzeit der fehlerhaften Anwendung: 0x01cdd4cc7697a57b
    Pfad der fehlerhaften Anwendung: F:\Program Files (x86)\iTunes\iTunes.exe
    Pfad des fehlerhaften Moduls: C:\Windows\syswow64\KERNELBASE.dll
    Berichtskennung: e6ec8567-40bf-11e2-a1eb-5404a63d3a91
    Ereignis-XML:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2012-12-07T22:46:14.000000000Z" />
        <EventRecordID>56050</EventRecordID>
        <Channel>Application</Channel>
        <Computer>Nico-PC</Computer>
        <Security />
      </System>
      <EventData>
        <Data>iTunes.exe</Data>
        <Data>11.0.0.163</Data>
        <Data>50b71fed</Data>
        <Data>KERNELBASE.dll</Data>
        <Data>6.1.7601.17932</Data>
        <Data>50327672</Data>
        <Data>80000003</Data>
        <Data>00013219</Data>
        <Data>2dec</Data>
        <Data>01cdd4cc7697a57b</Data>
        <Data>F:\Program Files (x86)\iTunes\iTunes.exe</Data>
        <Data>C:\Windows\syswow64\KERNELBASE.dll</Data>
        <Data>e6ec8567-40bf-11e2-a1eb-5404a63d3a91</Data>
      </EventData>
    </Event>
    is there any Fix for this problem?
    Thanks,
    Nico

    So here is the weird thing. I got this error as soon as I attempted to access the iTunes store -- then again as soon as I restarted iTunes.
    Both times it errored out with the above event viewer error which was of no help:
    Faulting application name: iTunes.exe, version: 11.0.0.163, time stamp: 0x50b71fed
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x00000000
    Faulting process id: 0x1674
    Faulting application start time: 0x01cdd96bd3867602
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: unknown
    Report Id: 178b184d-455f-11e2-a2e9-0026b97a674b
    However -- on my third attempt -- it loaded up just fine and has not crashed. I was able to access the iTunes store and my library but have not actually played any files yet.
    And my setup is 64bit Windows 7.
    If it happens again i'll repost any extra findings but I guess I was lucky enough that the problem went away and somehow corrected itself? Very strange.

  • Why will a stand alone executalbe with an installer work on windows 2000 and crashes on windows xp professional?

    When I run the setup.exe file on a Windows 2000 system it installs properly, but the same file run on a XP Professional system I get an error stating Fatal Error: Installation ended prematurely because of an error.
    See here for more information on the specific installer I'm trying to use.
    In fact I get this error for any stand alone executable I try to install on any XP machines. I am using LV 7.1. Is there a way to manually install eve
    rything?
    Thanks

    Sure you can Install a lv application manually. just copy the exe-file,
    support files in a folder. For the runtimeengine just copy the file
    lvrte.dll in the folder of your application or in the windows system folder.
    Hope that helps, Niko
    BB Herman wrote:
    > Why will a stand alone executalbe with an installer work on windows
    > 2000 and crashes on windows xp professional?
    >
    > When I run the setup.exe file on a Windows 2000 system it installs
    > properly, but the same file run on a XP Professional system I get an
    > error stating Fatal Error: Installation ended prematurely because of
    > an error.
    >
    > See
    > HREF="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000...
    for more information on the specific installer I'm trying to
    > use.
    >
    > In fact I get this error for any stand alone executable I try to
    > install on any XP machines. I am using LV 7.1. Is there a way to
    > manually install everything?
    >
    > Thanks

  • Firefox 5.0 crashed, sent "send crash report" window; window stuck

    Firefox crashed, sent "send crash report" window. Now every time I click on the Firefox icon to start Firefox, the crash report window comes up instead of starting Firefox. Firefox won't open.

    Hello. I have a similar problem to the question of Ryan Vaught, (Firefox crashes upon open - won't send crash report; crash report info summarized below [MY] Firefox version: prior one to 3.6.7 Operating System: Windows XP Provessional). Mine is a bit different tho. Firefox seems to be crashing and my internet crashes right with it. When it does this, it also takes out some Win32 system .exe files. I too have ran AVG (Full Coverage /Purchased one) and then updated to Viper (Sunbelt Software) and it comes up clean of any viruses, etc. Once it crashes and I close Firefox, the crash report request comes up. When I hit send, it says it cannot be sent with no additional information as to why. I just updated Firefox to 3.6.7 and sure hope this helps, but it almost always happens when I am playing games that use flash. I can send a screenshot if you need it and feel free to edit my question if need be. I've checked my Viper settings and can get to all the websites so far trying to rule it out. Deleted my internet set up and then added it back as a new connection (hope that made sense), so I don't know who to be asking this question of, but hoping you may know the answer why I can't send the crash report. Whew! Sorry for the lengthy question/issue. Your help is greatly appreciated!! Carolyn Burnam
    <blockquote>removed personal email -MJB</blockquote>

  • Firefox was working fine in the morning, after half a day, it just crashed and now every time i try to start FF it crashes, i reinstalled FF, even tryed FF 4 beta, every time same crash report window, and nothing happens.

    After a half day working normally, FF just crashed, and now i reinstall it, even tryed FF 4 beta, and still getting crash report. Cant even start in safe mode, same crash report window pop up.
    Checked for viruses, malwares. Nothing helped.

    Other applications print okay? If so, try deleting the Preview .plist
    You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~`/Library. Delete the .plist(s) for the application.
    If you prefer to make your user library permanently visible, use the Terminal command found below. It does work with Mountain Lion:
    http://osxdaily.com/2011/07/22/access-user-library-folder-in-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

  • I'm getting popup notices that Firefox has a problem, and Windows is looking for a solution; then it closes Firefox and says Windows will let me know if it finds a solution. No crash report window comes up.

    Firefox is my default browser on my new laptop, with OS Windows 7. I've now had several instances where a Windows popup comes up saying Firefox has developed a problem and may have to close. It also indicates Windows "is looking for a solution to the problem." No solution is found, however, and Firefox is forced to close, with the happy notice that Windows will let me know if it finds a solution to the problem. If there is any tech data on the crash, I'm not sure where to find it, and no Firefox crash report window comes up. I thought it was an anomaly the first time, but this has now occurred at least 4 times in the past several days.

    See:
    * https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it

  • How to start java.exe from a java program in windows ?

    Hi,
    I did like to know, if its possible to run java.exe from a java program on windows ? The java.exe should be visible from checking the processes that are currently running using the Task Manager on windows.

    Runtime.getRuntime().exec("java Sample");

  • Itunes keeps crashing with Windows 8.1 and doesn't recognize my iphone or ipad to syn.  Frustrated!!!

    After new Itunes update ... it  keeps crashing with Windows 8.1 and doesn't recognize my iphone or ipad to syn.  Frustrated!!!  I have unninstalled it .. installed it, but nothing happens.  I even loaded an earlier itunes version, it worked without crashing, but it still did not recognize iphone or ipad.

    Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

  • Adobe acrobat pro 9.2 crashes in windows xp sp3 when closing a pdf

    Adobe acrobat pro 9.2 crashes in windows xp sp3 when I close a pdf. This means that if I have multiple files open, all of them close. I get an error message from windows that the problem is due to windows' Data Execution Prevention (DEP). I tried making Adobe an exception to windows' DEP and re-started the computer but this did not help the problem. Any ideas about how to fix this problem?

    So.. If we want to control the "hardware graphics acceleration", should it be done inside the Adobe Acrobat Pro ?
    If yes, which part of option should we changed ?
    If not, can someone tell me which way to setting this one ?
    Do anybody have other input ? This problem makes me crazy
    Thank you so much in advanced.

Maybe you are looking for