Unable to use PC Companion due to required update

Hi!
When I start the Companion it says that I have to upgrade to be able to use it. Bu the upgrade fails when I'm at work. If I use a public network it might work to upgrade.
But the problem is that I have to use the old PC Sute until I get a public connection.
Why can't I use the program until I have updated. If it is a requirement, why can't the upgrade hapen as a background process so I can work?
/Leif

The funny thing is that when I'm on a public network there aren't anny need for upgrade! It's only at work, on the corperate LAN, that I get the message about a required update!

Similar Messages

HT4623 i have apple iphone 4 32gb orange,currently i m india,and unable to use indian sim,and i have updated it to new ios6,can u plz help me out

i have apple iphone 4 32gb orange,currently i m india,and unable to use indian sim,and i have updated it to new ios6,can u plz help me out

Select the country in which the iPhone was originally sold:
http://support.apple.com/kb/HT1937
You'll find a link to the carrier on whose pages you can probably find contact information.
As RG said, only the carrier to which the iPhone is locked can authorize unlocking. That is the only "way out". To have an iPhone that was "factory unlocked", you would have had to purchase it that way.
Regards.

Unable to use paid calling due to line left open b...

after calling my bank on paid calling, I hung up but the line was left open and now, I am inable to call out and every time I try, money is deleted from my account. Any ideas how to fix this ? Bank has ended from their end, they say. Thanks.

i was unable to use mail due to the IMAP issue
Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The better your description, the better the chance of a solution.

App requires update,How can i decline?

Hello guys.I have an app using months but now it requires update.So its grayed now that i cant open it.When i click on it it starts updating.Is there anything i can stop updating?i dont want new features.. THANKS!
i have an ios 7.0.4/iPhone 4

Connect your iPad to your computer and launch iTunes. You'll most likely be prompted to update. For more information and full details, see the section titled "Update your device using iTunes" in this support article:
http://support.apple.com/kb/HT4623
You should read this article as well:
http://support.apple.com/kb/HT4972
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

HT4428 Since updating the software to version 5.3 I have been unable to use my Apple TV due to HDCP issue.

Since updating the software to version 5.3 I have been unable to use my Apple TV due to an HDCP issue. I have eliminated the HDMI cable as the problem problem. My Television is HDCP compliant. And prior to updating my Apple TV to the current version all content was availble and streaming beautifully.
Is it possible to revert to the previous software update version?

If you can't use another card, how about redeeming iTunes gift certificates on it instead?

[SOLVED] Unable to use DRI due to DRM problem

HI.
I have a Sony Vaio laptop with an ATI video card, and I'm using the opensource ATI video drivers.
The problem is that I'm unable to use DRI. I think it's because there's no DRM module loaded.
How can I fix that?
This info may be relevant:
bash-3.2# dmesg | grep agp
Linux agpgart interface v0.102
agpgart: Detected Ati IGP345M chipset
agpgart: AGP aperture is 128M @ 0xe8000000
bash-3.2# dmesg | grep -i drm
bash-3.2# lspci
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH i686
Current Operating System: Linux blah 2.6.24-ARCH #1 SMP PREEMPT Wed Feb 27 01:15:32 CET 2008 i686
Build Date: 03 February 2008 02:54:48PM
Thank you.
Last edited by elifarley (2009-05-04 18:46:47)

Hi signor_rossi.
The 'drm' module was not loaded because I didn't include the 'radeon' module in my rc.conf file
I added 'radeon' to my modules and restarted, which led to another problem. To solve this new problem, I had to declare some additional modules before the radeon module, like this:
ati_agp agpgart radeon radeonfb
(It seems that the 'ati_agp' and 'agpgart' modules must be loaded before the 'radeon' module)
I added the 'radeonfb' module just in case, but I'm not sure if I'll need it.
With this configuration in place, DRI is finally enabled, but now the screen is completely black
I started the X server with:
startx 2>startx.log
After the screen went all black, I killed X (by typing <ctrl>+<alt>+<backspace>) and typed 'reboot' in order to get a visible screen again.
This is the last part of 'startx.log':
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
init memmap
init common
init crtc1
init pll1
restore memmap
restore common
restore crtc1
restore pll1
restore LVDS
enable montype: 2
disable montype: 2
Backtrace:
Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
waiting for X server to begin accepting connections
giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error.
You can take a look at the Xorg.0.log file here: http://pastebin.ca/935744
In order to avoid the black screen, I have to disable DRI in my xorg.conf file...
Any idea is welcome.
Thanks.
Last edited by elifarley (2008-03-09 21:54:48)

I AM UNABLE TO USE MY ADOBE SEND, I RESUBSCRIBED, WHICH I DONT THINK IT IS DUE, BUT IM STILL UNABLE TO SEND FILES. WHAT DO I DO

I AM UNABLE TO USE MY ADOBE SEND FEATURE. I RESUBSCRIBED BECAUSE THAT WAS THE ONLY OPTION GIVEN. MY CREDIT CARD INFO WAS DISPLAYED. BUT I M STILL UNABLE TO USE THE FEATURE. I DO NOT THINK IT IS TIME FOR RENEWAL OF SERVICE.

I'm sorry that you're having trouble with Adobe Send. I can confirm that you have an active Paid subscription.
Can you tell us what's happening when you attempt to use it?
Are you trying to use it from with Adobe Reader, or from a web browser (at https://cloud.acrobat.com/send)? Or from the Outlook Plugin?
The more details you can provide, the better I will be able to help you.

Unable to use CS6 that i bought. Do not have the individual Photoshop required?

I am unable to use Photoshop CS6 that i bought. It is asking me for serial numbers of CS3. CS4, etc. Is there a way that it will allow me to enter the serial numbersof the Creative Suite?
I only have the Creative suites CS5 and CS4 therefore, I cannot use this product. Please reimburse the amount of US $ 199.00.
thank you

But doesn't the Application manager test to see what your position is in this respect? Not so likely, of course, when it comes to earlier versions. I've always wondered why so many people are anal about having their Adobe software on a DVD, or insist on ordering it through a reseller. I guess I could lay my hands on the disks from old versions of Photoshop, but you just never know when your wife is going to tidy your stuff up lose all your computer stuff. It is so much better ordering online, and having that history available, along with the downloads and license numbers if you should ever need them years later.
With apologies to the OP, who may not have English as a first language, I wonder if anyone else was reminded of the on-going Morecame and Wise sketch about Ernie Wise’s aspirations as a playwright? Them were the days

The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error

Since demoting a child domain a few days ago, Exchange 2013 is still trying to contact it and as a result generating errors in the application event logs. I had a similar problem which I solved by removing some old migration batches, now I have a problem
with the Microsoft Exchange Mailbox Replication service.
The event logged is:
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '0b6c0f5a-0563-48e2-8b97-e0781c6cc69a'
Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for
domain 'admin.riddlesdown.local'.. --> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or
configured incorrectly DNS server.
The domain doesn't exist in AD Sites and Services, I have removed all traces from DNS but this is still occurring. When I run Get-ADServerSettings | fl it reports no trace of the domain or a DC that was previously in it.
How can I stop these events occurring and is it likely to be causing something else not to work correctly.
We are running Exchange 2013 CU1

No, that didn't work. Here are more details:
Source: MSExchange ADAccess (EventID: 2130)
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or configured
incorrectly DNS server.
Source: MSExchange ADAccess (EventID: 2119)
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Error DNS_ERROR_RCODE_NAME_ERROR (0x8007232B) occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain admin.riddlesdown.local
The query was for the SRV record for _ldap._tcp.dc._msdcs.admin.riddlesdown.local
Common causes of this error include the following:
- The DNS SRV records required to locate a domain controller for the domain are not registered in DNS. These records are registered with a DNS server automatically when a domain controller is added to a domain. They are updated by the domain controller
at set intervals. This computer is configured to use DNS servers with following IP addresses:
10.59.100.7
10.59.100.8
fec0:0:0:ffff::1Microsoft.Exchange.Directory.TopologyService.exe
fec0:0:0:ffff::2Microsoft.Exchange.Directory.TopologyService.exe
fec0:0:0:ffff::3Microsoft.Exchange.Directory.TopologyService.exe
- One or more of the following zones do not include delegation to its child zone:
admin.riddlesdown.local
riddlesdown.local
local
. (the root zone)
Source: MSExchange Mailbox Replication Service (EventID: 1121)
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '87f4b926-0621-43d3-afeb-fe475ee6d850'
Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
--> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
Something is cause the Exchange server to go looking for our old domain, but what and why?

Users unable to access US content due to canadian external IP address

Hello there,
We have users in US who are required to access US websites for content searching but unable to do so because of their IP address is being Natted to external IP that is assigned in Canadian block.
We cannot use proxy servers due to legality.
any suggestions or recommendations ?
Thanks
M

Hi,
Here is my working solution that I have used for years with StrongVPN.
http://forum.strongvpn.com/forums/topic/3480/cisco-ios-l2tp-working-connection-config
Hope this helps.
Cheers.
Jason

I locked myself out of my ipod touch for 60 mins then actually typed the wrong password in again. Now it is telling me to "connect to itunes". I am unsure how to do this. I am unable to use my ipod at all now. Please help.

Hi,
Due to my brother locking me out of my ipod touch I had to wait an hour to log in again. Unfortunately when I did this, I, again put in the wrong password twice more, each time locking me out for a further 60 minutes. On my 3rd attempt to log in the wrong password was entered again. This time though instead of logging me out for another 60mins it now tells me to "connect to itunes" but I have no idea how to do this and I am now unable to use my ipod. Please help.

See Here > http://support.apple.com/kb/HT1212

Unable to use 'copy' feature with registered version of quicktime pro.

Hi.
I have a registered version of Quicktime pro (7.1.6), and i am unable to use the copy feature. I captured several videos from work using a windows box and an application whose name escapes me at the moment. Due to the windows app being garbage, i was only able to capture in MPEG1 format (MPEG2 caused the app to crash, of course). I have brought the files home and am now unable to copy selections of it for exporting into smaller files. I can highlight lengths of the video (no audio, just video) but the 'copy' feature is grayed out still. Any ideas on what is causing this? The video format is as follows:
MPEG1 Muxed, 640 x 480
FPS: 29.97
Data rate: 4066.42 kbits/sec
I'm running 10.3.9, but have also had no success on a 10.4 macmini, so the OS doesn't seem to be the issue.
I'm trying to get this video into imovie, but since it's over 600 megs, imovie cops out after a few hours and says it can't import it.
Help?

Not all multiplexed videos come with AC3. They don't have to have audio in the first place. Some of them come with Linear PCM, which is the case for iDVD's VOB files, and MP2. If a multiplexed video is equipped with AC3, you are right, and the resulting modified sub-clip won't contain audio. But if it's Linear PCM or MP2, the edited sub-clip will contain audio.
I'm finished with this case.
Message was edited by: Horror in Oklahoma

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

[SOLVED] Gnome 3.8: Unable to use Nokia N9 as a Bluetooth modem

Hi,
I'm unable to use my Nokia Any ideas on how to fix this?
Here are some log files:
Bluetooth startup from everything.log:
/> bluetoothd[382]: Bluetooth daemon 4.101
bluetoothd[382]: Starting SDP server
bluetoothd[382]: DIS cannot start: GATT is disabled
bluetoothd[382]: Failed to init deviceinfo plugin
bluetoothd[382]: Failed to init gatt_example plugin
bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Unknown command complete for opcode 1J
bluetoothd[382]: Unknown command complete for opcode 19
bluetoothd[382]: bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
entries from everything.log:
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2800003 (Uuden Blue)
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
bluetoothd[382]: bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: bluetoothd[382]: Stopping discovery
bluetoothd[382]: Stopping discovery
kernel: [ 1179.820342] usb 2-1: reset high-speed USB device number 2 using ehci-pci
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 3 matched rules; type="method_return", sender=":1.58" (uid=1000 pid=1082 comm="bluetooth-wizard ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ")
bluetoothd[382]: bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.AudioSource.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.AudioSource" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: Default Bluetooth adapter is powered
/etc/gdm/Xsession[612]: ** Message: dun_start: starting DUN device discovery...
/etc/gdm/Xsession[612]: ** Message: Tutkitaan puhelimen asetuksia…
/etc/gdm/Xsession[612]: ** Message: dun_start: calling Connect...
/etc/gdm/Xsession[612]: ** Message: dun_start: waiting for Connect success...
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: processing Connect reply
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: new rfcomm interface '/dev/rfcomm0'
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: finished
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kernel: [ 1212.925984] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.790844] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.791357] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Creating modem with plugin 'Nokia' and '1' ports
kernel: [ 1215.816882] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3' successfully created
kernel: [ 1215.820679] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem: state changed (unknown -> disabled)
kernel: [ 1216.873341] Bluetooth: TIOCGSERIAL is not supported
/etc/gdm/Xsession[612]: ** Message: modem_object_added: (/org/freedesktop/ModemManager1/Modem/0) modem found
/etc/gdm/Xsession[612]: ** Message: start_wizard: (/org/freedesktop/ModemManager1/Modem/0) starting the mobile wizard
NetworkManager[387]: <info> ignoring modem 'rfcomm0' (no associated Bluetooth device)
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: mobile wizard done
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: adding new setting
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: waiting for add connection result...
NetworkManager[387]: <info> BT device Nokia N9 (40:98:4E:65:A1:00) added (DUN)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): new Bluetooth device (driver: 'bluez' ifindex: 0)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): exported as /org/freedesktop/NetworkManager/Devices/1
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'managed') [2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
/etc/gdm/Xsession[612]: ** Message: Puhelimesi on nyt valmis käyttöön.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.59" (uid=1000 pid=1082 comm="bluetooth-wizard ")
NetworkManager[387]: <info> (eth0): device state change: activated -> disconnected (reason 'user-requested') [100 30 39]
NetworkManager[387]: <info> (eth0): deactivating device (reason 'user-requested') [39]
avahi-daemon[392]: Withdrawing address record for 192.168.0.222 on eth0.
avahi-daemon[392]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.222.
avahi-daemon[392]: Interface eth0.IPv4 no longer relevant for mDNS.
dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
systemd[1]: Starting Network Manager Script Dispatcher Service...
dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
systemd[1]: Started Network Manager Script Dispatcher Service.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> failed (reason 'modem-not-found') [50 120 43]
NetworkManager[387]: <warn> Activation (40:98:4E:65:A1:00) failed for connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: failed -> disconnected (reason 'none') [120 30 0]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'none') [0]
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 7 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.8" (uid=0 pid=387 comm="/usr/bin/NetworkManager --no-daemon ")
/> systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd-sysctl[132]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Coldplug all Devices.
systemd-modules-load[138]: Inserted module 'fuse'
systemd[1]: Started Create static device nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Mounted Debug File System.
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.9.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Sat Jun 8 09:22:45 CEST 2013
0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
syslog-ng[390]: syslog-ng starting up; version='3.4.1'
systemd[1]: Mounted Huge Pages File System.
0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] SMBIOS 2.4 present.
0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
0.000000] No AGP bridge found
0.000000] e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
0.000000] 00000-9FFFF write-back
0.000000] A0000-BFFFF uncachable
0.000000] C0000-C7FFF write-protect
0.000000] C8000-FFFFF uncachable
0.000000] MTRR variable ranges enabled:
0.000000] 0 base 000000000000 mask FFFF80000000 write-back
0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
0.000000] 4 base 000100000000 mask FFFF00000000 write-back
0.000000] 5 base 000200000000 mask FFFF00000000 write-back
0.000000] 6 base 000300000000 mask FFFFE0000000 write-back
0.000000] 7 base 000320000000 mask FFFFF0000000 write-back
0.000000] TOM2: 0000000330000000 aka 13056M
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [mem 0x000f5440-0x000f544f] mapped at [ffff8800000f5440]
0.000000] Scanning 1 areas for low memory corruption
0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
0.000000] [mem 0x00000000-0x000fffff] page 4k
0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32fe00000-0x32fffffff]
0.000000] [mem 0x32fe00000-0x32fffffff] page 2M
0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32c000000-0x32fdfffff]
0.000000] [mem 0x32c000000-0x32fdfffff] page 2M
0.000000] init_memory_mapping: [mem 0x300000000-0x32bffffff]
0.000000] [mem 0x300000000-0x32bffffff] page 2M
0.000000] init_memory_mapping: [mem 0x00100000-0xcfdeffff]
0.000000] [mem 0x00100000-0x001fffff] page 4k
0.000000] [mem 0x00200000-0x3fffffff] page 2M
0.000000] [mem 0x40000000-0xbfffffff] page 1G
0.000000] [mem 0xc0000000-0xcfbfffff] page 2M
0.000000] [mem 0xcfc00000-0xcfdeffff] page 4k
0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
0.000000] [mem 0x100000000-0x2ffffffff] page 1G
0.000000] RAMDISK: [mem 0x378a4000-0x37c49fff]
0.000000] ACPI: RSDP 00000000000f6e70 00014 (v00 GBT )
0.000000] ACPI: RSDT 00000000cfdf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: FACP 00000000cfdf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: DSDT 00000000cfdf30c0 0725F (v01 GBT GBTUACPI 00001000 MSFT 03000000)
0.000000] ACPI: FACS 00000000cfdf0000 00040
0.000000] ACPI: SSDT 00000000cfdfa400 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
0.000000] ACPI: HPET 00000000cfdfad00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
0.000000] ACPI: MCFG 00000000cfdfad40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: APIC 00000000cfdfa340 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] Scanning NUMA topology in Northbridge 24
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
0.000000] Initmem setup node 0 [mem 0x00000000-0x32fffffff]
0.000000] NODE_DATA [mem 0x32fff9000-0x32fffdfff]
0.000000] [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0
0.000000] Zone ranges:
0.000000] DMA [mem 0x00001000-0x00ffffff]
0.000000] DMA32 [mem 0x01000000-0xffffffff]
0.000000] Normal [mem 0x100000000-0x32fffffff]
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0.000000] node 0: [mem 0x00001000-0x0009efff]
0.000000] node 0: [mem 0x00100000-0xcfdeffff]
0.000000] node 0: [mem 0x100000000-0x32fffffff]
0.000000] On node 0 totalpages: 3145102
0.000000] DMA zone: 64 pages used for memmap
0.000000] DMA zone: 21 pages reserved
0.000000] DMA zone: 3998 pages, LIFO batch:0
0.000000] DMA32 zone: 13240 pages used for memmap
0.000000] DMA32 zone: 847344 pages, LIFO batch:31
0.000000] Normal zone: 35840 pages used for memmap
0.000000] Normal zone: 2293760 pages, LIFO batch:31
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
0.000000] smpboot: Allowing 8 CPUs, 5 hotplug CPUs
0.000000] nr_irqs_gsi: 40
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf3000
0.000000] PM: Registered nosave memory: 00000000cfdf3000 - 00000000cfe00000
0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff88032fc00000 s85824 r8192 d20672 u262144
0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095937
0.000000] Policy zone: Normal
0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] __ex_table already sorted, skipping sort
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Node 0: aperture @ c4000000 size 32 MB
0.000000] Aperture pointing to e820 RAM. Ignoring.
0.000000] Your BIOS doesn't leave a aperture memory hole
0.000000] Please enable the IOMMU option in the BIOS setup
0.000000] This costs you 64 MB of RAM
0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
0.000000] Memory: 12235744k/13369344k available (4984k kernel code, 788936k absent, 344664k reserved, 3966k data, 1092k init)
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
0.000000] Preemptible hierarchical RCU implementation.
0.000000] RCU dyntick-idle grace-period acceleration is enabled.
0.000000] Dump stacks of tasks blocking RCU-preempt GP.
0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
0.000000] NR_IRQS:4352 nr_irqs:744 16
0.000000] spurious 8259A interrupt: IRQ7.
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] allocated 50331648 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] hpet clockevent registered
0.003333] tsc: Fast TSC calibration using PIT
0.006666] tsc: Detected 2812.672 MHz processor
0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5627.73 BogoMIPS (lpj=9375573)
0.000006] pid_max: default: 32768 minimum: 301
0.000035] Security Framework initialized
0.000041] AppArmor: AppArmor disabled by boot time parameter
0.000892] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
0.005505] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
0.007582] Mount-cache hash table entries: 256
0.007774] Initializing cgroup subsys cpuacct
0.007776] Initializing cgroup subsys memory
0.007786] Initializing cgroup subsys devices
0.007787] Initializing cgroup subsys freezer
0.007789] Initializing cgroup subsys net_cls
0.007790] Initializing cgroup subsys blkio
0.007813] tseg: 00cff00000
0.007816] CPU: Physical Processor ID: 0
0.007817] CPU: Processor Core ID: 0
0.007818] mce: CPU supports 6 MCE banks
0.007823] LVT offset 0 assigned for vector 0xf9
0.007828] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
0.007828] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
0.007828] tlb_flushall_shift: 4
0.007908] Freeing SMP alternatives: 20k freed
0.008523] ACPI: Core revision 20130117
0.010353] ACPI: All ACPI Tables successfully acquired
0.042664] ftrace: allocating 19546 entries in 77 pages
0.399338] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.432338] smpboot: CPU0: AMD Phenom(tm) II X3 720 Processor (fam: 10, model: 04, stepping: 02)
0.535738] Performance Events: AMD PMU driver.
0.535742] ... version: 0
0.535743] ... bit width: 48
0.535744] ... generic registers: 4
0.535745] ... value mask: 0000ffffffffffff
0.535746] ... max period: 00007fffffffffff
0.535746] ... fixed-purpose events: 0
0.535747] ... event mask: 000000000000000f
0.565797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
0.572465] smpboot: Booting Node 0, Processors #1 #2
0.602275] Brought up 3 CPUs
0.602279] smpboot: Total of 3 processors activated (16882.19 BogoMIPS)
0.605948] devtmpfs: initialized
0.608503] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
0.609303] RTC time: 21:44:15, date: 06/16/13
0.609349] NET: Registered protocol family 16
0.609448] node 0 link 0: io port [b000, ffff]
0.609451] TOM: 00000000d0000000 aka 3328M
0.609453] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
0.609455] node 0 link 0: mmio [a0000, bffff]
0.609457] node 0 link 0: mmio [d0000000, dfffffff]
0.609459] node 0 link 0: mmio [f0000000, fe02ffff]
0.609460] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
0.609462] TOM2: 0000000330000000 aka 13056M
0.609464] bus: [bus 00-04] on node 0 link 0
0.609466] bus: 00 [io 0x0000-0xffff]
0.609467] bus: 00 [mem 0x000a0000-0x000bffff]
0.609468] bus: 00 [mem 0xd0000000-0xdfffffff]
0.609469] bus: 00 [mem 0xe0500000-0xffffffff]
0.609470] bus: 00 [mem 0xe0100000-0xe04fffff]
0.609471] bus: 00 [mem 0x330000000-0xfcffffffff]
0.609498] ACPI: bus type PCI registered
0.609552] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.609554] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
0.617921] PCI: Using configuration type 1 for base access
0.618123] mtrr: your CPUs had inconsistent variable MTRR settings
0.618124] mtrr: probably your BIOS does not setup all CPUs.
0.618125] mtrr: corrected configuration.
0.618516] bio: create slab <bio-0> at 0
0.618576] ACPI: Added _OSI(Module Device)
0.618577] ACPI: Added _OSI(Processor Device)
0.618578] ACPI: Added _OSI(3.0 _SCP Extensions)
0.618580] ACPI: Added _OSI(Processor Aggregator Device)
0.619096] ACPI: EC: Look up EC in DSDT
0.623380] ACPI: Interpreter enabled
0.623389] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
0.623394] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
0.623403] ACPI: (supports S0 S3 S4 S5)
0.623405] ACPI: Using IOAPIC for interrupt routing
0.623473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.637118] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.637201] PCI host bridge to bus 0000:00
0.637204] pci_bus 0000:00: root bus resource [bus 00-ff]
0.637207] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
0.637209] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
0.637210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
0.637212] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
0.637214] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
0.637223] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
0.637234] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
0.637312] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
0.637342] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
0.637366] pci 0000:00:02.0: System wakeup disabled by ACPI
0.637399] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
0.637428] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
0.637453] pci 0000:00:04.0: System wakeup disabled by ACPI
0.637485] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
0.637514] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
0.637542] pci 0000:00:0a.0: System wakeup disabled by ACPI
0.637581] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
0.637600] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
0.637609] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
0.637618] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
0.637627] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
0.637636] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
0.637645] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
0.637664] pci 0000:00:11.0: set SATA to AHCI mode
0.637736] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
0.637749] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
0.637811] pci 0000:00:12.0: System wakeup disabled by ACPI
0.637840] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
0.637853] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
0.637916] pci 0000:00:12.1: System wakeup disabled by ACPI
0.637948] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
0.637966] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
0.638046] pci 0000:00:12.2: supports D1 D2
0.638047] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
0.638065] pci 0000:00:12.2: System wakeup disabled by ACPI
0.638099] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
0.638112] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
0.638178] pci 0000:00:13.0: System wakeup disabled by ACPI
0.638205] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
0.638217] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
0.638282] pci 0000:00:13.1: System wakeup disabled by ACPI
0.638316] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
0.638334] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
0.638414] pci 0000:00:13.2: supports D1 D2
0.638415] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
0.638436] pci 0000:00:13.2: System wakeup disabled by ACPI
0.638472] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
0.638587] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
0.638602] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
0.638611] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
0.638620] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
0.638629] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
0.638638] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
0.638722] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
0.638743] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
0.638806] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
0.638830] pci 0000:00:14.2: System wakeup disabled by ACPI
0.638857] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
0.638963] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
0.639012] pci 0000:00:14.4: System wakeup disabled by ACPI
0.639040] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
0.639053] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
0.639119] pci 0000:00:14.5: System wakeup disabled by ACPI
0.639151] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
0.639203] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
0.639254] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
0.639305] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
0.639358] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
0.639454] pci 0000:01:00.0: [1002:94b3] type 00 class 0x030000
0.639466] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
0.639475] pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]
0.639482] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
0.639493] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
0.639520] pci 0000:01:00.0: supports D1 D2
0.639554] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
0.639566] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
0.639616] pci 0000:01:00.1: supports D1 D2
0.648955] pci 0000:00:02.0: PCI bridge to [bus 01]
0.648960] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.648963] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.648966] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.649016] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
0.649081] pci 0000:02:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
0.649130] pci 0000:02:00.0: PME# supported from D3hot
0.649179] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
0.649197] pci 0000:02:00.1: reg 10: [io 0xdf00-0xdf07]
0.649207] pci 0000:02:00.1: reg 14: [io 0xde00-0xde03]
0.649217] pci 0000:02:00.1: reg 18: [io 0xdd00-0xdd07]
0.649227] pci 0000:02:00.1: reg 1c: [io 0xdc00-0xdc03]
0.649237] pci 0000:02:00.1: reg 20: [io 0xdb00-0xdb0f]
0.649319] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
0.649326] pci 0000:00:04.0: PCI bridge to [bus 02]
0.649329] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.649331] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.649334] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.649377] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
0.649389] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
0.649408] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
0.649421] pci 0000:03:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
0.649430] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
0.649474] pci 0000:03:00.0: supports D1 D2
0.649475] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
0.658954] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.658959] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.658961] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.658964] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.659008] pci 0000:04:06.0: [1131:7146] type 00 class 0x048000
0.659025] pci 0000:04:06.0: reg 10: [mem 0xfdbff000-0xfdbff1ff]
0.659127] pci 0000:04:07.0: [9710:9805] type 00 class 0x078000
0.659143] pci 0000:04:07.0: reg 10: [io 0xbf00-0xbf07]
0.659155] pci 0000:04:07.0: reg 14: [io 0xbe00-0xbe07]
0.659167] pci 0000:04:07.0: reg 18: [io 0xbd00-0xbd07]
0.659179] pci 0000:04:07.0: reg 1c: [io 0xbc00-0xbc07]
0.659190] pci 0000:04:07.0: reg 20: [io 0xbb00-0xbb07]
0.659202] pci 0000:04:07.0: reg 24: [io 0xba00-0xba0f]
0.659264] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
0.659286] pci 0000:04:0e.0: reg 10: [mem 0xfdbfe000-0xfdbfe7ff]
0.659298] pci 0000:04:0e.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]
0.659387] pci 0000:04:0e.0: supports D1 D2
0.659389] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
0.659445] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
0.659449] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.659453] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.659457] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.659458] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
0.659460] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
0.659462] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
0.659463] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
0.659465] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
0.659479] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
0.659481] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
0.659908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659945] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659979] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660012] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660078] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660111] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660144] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660468] acpi root: \_SB_.PCI0 notify handler is installed
0.660494] Found 1 acpi root devices
0.660564] ACPI: No dock devices found.
0.660640] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
0.660643] vgaarb: loaded
0.660644] vgaarb: bridge control possible 0000:01:00.0
0.660676] PCI: Using ACPI for IRQ routing
0.668997] PCI: pci_cache_line_size set to 64 bytes
0.669004] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
0.669070] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
0.669071] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
0.669150] NetLabel: Initializing
0.669151] NetLabel: domain hash size = 128
0.669152] NetLabel: protocols = UNLABELED CIPSOv4
0.669161] NetLabel: unlabeled traffic allowed by default
0.669177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
0.669180] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
0.671205] Switching to clocksource hpet
0.674983] pnp: PnP ACPI init
0.674994] ACPI: bus type PNP registered
0.675058] system 00:00: [io 0x04d0-0x04d1] has been reserved
0.675060] system 00:00: [io 0x0220-0x0225] has been reserved
0.675062] system 00:00: [io 0x0290-0x0294] has been reserved
0.675065] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675512] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.675535] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
0.675543] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
0.675575] system 00:01: [io 0x4100-0x411f] has been reserved
0.675578] system 00:01: [io 0x0228-0x022f] has been reserved
0.675580] system 00:01: [io 0x040b] has been reserved
0.675581] system 00:01: [io 0x04d6] has been reserved
0.675583] system 00:01: [io 0x0c00-0x0c01] has been reserved
0.675585] system 00:01: [io 0x0c14] has been reserved
0.675586] system 00:01: [io 0x0c50-0x0c52] has been reserved
0.675588] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
0.675589] system 00:01: [io 0x0c6f] has been reserved
0.675591] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
0.675593] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
0.675594] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
0.675596] system 00:01: [io 0x4000-0x40fe] has been reserved
0.675597] system 00:01: [io 0x4210-0x4217] has been reserved
0.675599] system 00:01: [io 0x0b00-0x0b0f] has been reserved
0.675601] system 00:01: [io 0x0b10-0x0b1f] has been reserved
0.675602] system 00:01: [io 0x0b20-0x0b3f] has been reserved
0.675604] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
0.675608] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675676] pnp 00:02: [dma 4]
0.675693] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
0.675740] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
0.675772] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
0.675791] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
0.675815] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
0.676004] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
0.676006] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
0.676106] pnp 00:08: disabling [mem 0x000cfe00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676108] pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676110] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676112] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676114] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676117] pnp 00:08: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676153] system 00:08: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
0.676155] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
0.676157] system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved
0.676159] system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved
0.676161] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
0.676162] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
0.676164] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
0.676166] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
0.676180] pnp: PnP ACPI: found 9 devices
0.676182] ACPI: bus type PNP unregistered
0.682550] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
0.682553] pci 0000:00:02.0: PCI bridge to [bus 01]
0.682556] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.682558] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.682561] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.682564] pci 0000:00:04.0: PCI bridge to [bus 02]
0.682566] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.682568] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.682570] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682574] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
0.682575] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.682577] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.682579] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.682582] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682585] pci 0000:00:14.4: PCI bridge to [bus 04]
0.682587] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.682592] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.682595] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.682771] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
0.682772] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
0.682774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
0.682775] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
0.682777] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
0.682779] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
0.682780] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
0.682782] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
0.682784] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
0.682785] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
0.682787] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682788] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
0.682790] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
0.682791] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682793] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
0.682795] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
0.682796] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
0.682798] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
0.682799] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]

I managed to get my wired connection back and updated my system. After that (and a reboot), NetworkManager started to mysteriously work.
Here are the relevant parts from journald's log:
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'dna internet connection'
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.388835] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.390823] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.398034] [nm-device-bt.c:947] act_stage2_config(): (40:98:4E:65:A1:00): requesting connection to the device
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813677] [nm-device-bt.c:836] bluez_property_changed(): (40:98:4E:65:A1:00): bluez property 'Connected' changed to 'true'
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813775] [nm-device-bt.c:846] bluez_property_changed(): (40:98:4E:65:A1:00): connected to the device
kesä 17 17:47:53 sunnydale NetworkManager[387]: <debug> [1371480473.67585] [nm-device-bt.c:808] bluez_connect_cb(): (40:98:4E:65:A1:00): connect request successful
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
kesä 17 17:47:53 sunnydale upowerd[518]: (upowerd:518): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb4/4-3/4-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kesä 17 17:47:53 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Creating modem with plugin 'Nokia' and '1' ports
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb4/4-3' successfully created
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem: state changed (unknown -> disabled)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) modem found.
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect started...
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (3/8): Enable
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> enabled)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (4/8): Wait to get fully enabled
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (5/8): Register
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (6/8): Bearer
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabling' --> 'enabled' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (7/8): Connect
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabled -> connecting)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabled' --> 'connecting' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <warn> Couldn't load Operator Name: 'Unknown error'
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '0', MNC: '0', Location area code: 'A1', Cell ID: '10C654')
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (8/8): All done
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <warn> (rfcomm0): failed to look up interface index
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987235] [nm-device.c:3066] nm_device_activate_schedule_stage3_ip_config_start(): Activation (40:98:4E:65:A1:00) setting firewall zone 'default'
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987260] [nm-firewall-manager.c:107] nm_firewall_manager_add_or_change_zone(): (rfcomm0) firewall zone add/change skipped (not running)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) scheduled.
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) started...
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> ip-config (reason 'none') [50 70 0]
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987628] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> using modem-specified IP timeout: 20 seconds
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> starting PPP connection
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.988323] [nm-ppp-manager.c:1068] nm_ppp_manager_start(): command line: /usr/sbin/pppd nodetach lock nodefaultroute ipv6 , debug rfcomm0 noipdefault noauth usepeerdns lcp-echo-failure 0 lcp-echo-interval 0 ipparam /org/freedesktop/NetworkManager/PPP/0 plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> pppd started with pid 914
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) complete.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) started...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) complete.
kesä 17 17:47:58 sunnydale pppd[914]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale NetworkManager[387]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale kernel: PPP generic driver version 2.4.2
kesä 17 17:47:58 sunnydale pppd[914]: pppd 2.4.5 started by root, uid 0
kesä 17 17:47:58 sunnydale pppd[914]: using channel 1
kesä 17 17:47:58 sunnydale pppd[914]: Using interface ppp0
kesä 17 17:47:58 sunnydale pppd[914]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.113258] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x1090
kesä 17 17:47:58 sunnydale NetworkManager[387]: using channel 1
kesä 17 17:47:58 sunnydale NetworkManager[387]: Using interface ppp0
kesä 17 17:47:58 sunnydale NetworkManager[387]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale systemd-sysctl[922]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.116359] [nm-udev-manager.c:568] handle_uevent(): UDEV event: action 'add' subsys 'net' device 'ppp0'
kesä 17 17:47:58 sunnydale NetworkManager[387]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale pppd[914]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale NetworkManager[387]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale kernel: PPP BSD Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale kernel: PPP Deflate Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale pppd[914]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale NetworkManager[387]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale pppd[914]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale pppd[914]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale pppd[914]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale pppd[914]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.851617] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x110D1
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> PPP manager(IP Config Get) reply received.
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) started...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.852986] [nm-system.c:194] sync_addresses(): (ppp0): syncing addresses (family 2)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853021] [nm-system.c:247] sync_addresses(): (ppp0): removing address '10.241.96.30/32'
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale NetworkManager[387]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale NetworkManager[387]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale NetworkManager[387]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale NetworkManager[387]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853775] [nm-system.c:280] sync_addresses(): (ppp0): adding address '10.241.96.30/0'
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:04 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855173] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.6.6.6/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855250] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.241.96.30/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855608] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_ip4_config_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855649] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration did not change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855666] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (device_ip4_config_changed): no DNS changes to commit (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855795] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858147] [nm-device.c:5244] nm_device_queue_state(): (40:98:4E:65:A1:00): queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858200] [nm-device.c:5174] nm_device_state_changed(): (40:98:4E:65:A1:00): device entered SECONDARIES state
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) complete.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.870449] [nm-device.c:5202] queued_set_state(): (40:98:4E:65:A1:00): running queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: secondaries -> activated (reason 'none') [90 100 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.872130] [nm-manager.c:591] manager_device_state_changed(): (40:98:4E:65:A1:00): triggered connectivity check due to state change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873625] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_state_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873683] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (update_routing_and_dns): queueing DNS updates (2)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Policy set 'dna internet connection' (ppp0) as default for IPv4 routing and DNS.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874320] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874341] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (update_routing_and_dns): no DNS changes to commit (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874368] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874383] [nm-dns-manager.c:1022] nm_dns_manager_end_updates(): (device_state_changed): committing DNS changes (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874399] [nm-dns-manager.c:591] update_dns(): updating resolv.conf
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) successful, device activated.
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:48:07 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:07 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:21 sunnydale /etc/gdm/Xsession[622]: (process:953): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
kesä 17 17:48:22 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:22 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus 0x2200006 (jussi@sunn) with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:31 sunnydale pppd[914]: IPV6CP: timeout sending Config-Requests
kesä 17 17:48:31 sunnydale NetworkManager[387]: IPV6CP: timeout sending Config-Requests
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale systemd[1]: Starting Hostname Service...
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale systemd[1]: Started Hostname Service.
kesä 17 17:49:43 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_raise: assertion `!window->override_redirect' failed
kesä 17 17:49:44 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_lower: assertion `!window->override_redirect' failed
And here is log about the updates I made:
[2013-06-17 17:01] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:01] [PACMAN] synchronizing package lists
[2013-06-17 17:01] [PACMAN] starting full system upgrade
[2013-06-17 17:04] [PACMAN] Running 'pacman -S --asdeps polkit'
[2013-06-17 17:04] [PACMAN] upgraded polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:24] [PACMAN] Running 'pacman -U --asdeps lib32-polkit-0.111-1-x86_64.pkg.tar.xz'
[2013-06-17 17:24] [PACMAN] upgraded lib32-polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:27] [PACMAN] Running 'pacman -S --asdeps libxkbcommon'
[2013-06-17 17:27] [PACMAN] upgraded libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -U --asdeps lib32-libxkbcommon-0.3.1-1-x86_64.pkg.tar.xz'
[2013-06-17 17:28] [PACMAN] upgraded lib32-libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:28] [PACMAN] synchronizing package lists
[2013-06-17 17:28] [PACMAN] starting full system upgrade
[2013-06-17 17:33] [PACMAN] removed lib32-dbus-core (1.6.10-1)
[2013-06-17 17:33] [PACMAN] upgraded attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded acl (2.2.51-3 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] upgraded attica (0.4.1-2 -> 0.4.2-1)
[2013-06-17 17:33] [PACMAN] upgraded cups-pk-helper (0.2.4-1 -> 0.2.5-1)
[2013-06-17 17:33] [PACMAN] upgraded dbus (1.6.10-1 -> 1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded dosfstools (3.0.17-1 -> 3.0.20-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk-update-icon-cache (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded flashplugin (11.2.202.285-1 -> 11.2.202.291-1)
[2013-06-17 17:33] [PACMAN] upgraded libgdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [ALPM] warning: directory permissions differ on /var/log/gdm/
filesystem: 711 package: 1770
[2013-06-17 17:33] [PACMAN] upgraded gdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [PACMAN] upgraded geoip-database (20130514-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded git (1.8.3-1 -> 1.8.3.1-1)
[2013-06-17 17:33] [PACMAN] upgraded glib2 (2.36.2-1 -> 2.36.3-2)
[2013-06-17 17:33] [PACMAN] upgraded xkeyboard-config (2.9-1 -> 2.9-2)
[2013-06-17 17:33] [PACMAN] upgraded iso-codes (3.41-1 -> 3.43-1)
[2013-06-17 17:33] [PACMAN] upgraded gnome-desktop (1:3.8.3-1 -> 1:3.8.3-2)
[2013-06-17 17:33] [PACMAN] upgraded gnome-user-docs (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded graphite (1:1.2.2-1 -> 1:1.2.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-afc (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-goa (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] Users no longer need to be in the 'camera' group to use camera devices
[2013-06-17 17:33] [PACMAN] upgraded libgphoto2 (2.5.1-1 -> 2.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-gphoto2 (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-mtp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-obexftp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-smb (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded hwids (20130512-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk-headless (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jdk7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded krb5 (1.11.2-4 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-acl (2.2.51-2 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] installed lib32-dbus (1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-krb5 (1.11.2-1 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded libbsd (0.4.2-1 -> 0.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libmbim (1.0.0-1 -> 1.2.0-1)
[2013-06-17 17:33] [PACMAN] upgraded libnautilus-extension (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libpipeline (1.2.3-1 -> 1.2.4-1)
[2013-06-17 17:33] [PACMAN] upgraded libquvi-scripts (0.4.14-1 -> 0.4.15-1)
[2013-06-17 17:33] [PACMAN] upgraded libusb-compat (0.1.4-2 -> 0.1.5-1)
[2013-06-17 17:33] [PACMAN] upgraded libxvmc (1.0.7-1 -> 1.0.8-1)
[2013-06-17 17:33] [PACMAN] upgraded link-grammar (4.7.11-1 -> 4.7.12-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-firmware (20130528-1 -> 20130610-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [PACMAN] upgraded linux (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-headers (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded lirc-utils (1:0.9.0-46 -> 1:0.9.0-47)
[2013-06-17 17:33] [PACMAN] upgraded mime-types (8-1 -> 9-1)
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus.desktop as /usr/share/applications/nautilus.desktop.pacnew
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus-autorun-software.desktop as /usr/share/applications/nautilus-autorun-software.desktop.pacnew
[2013-06-17 17:34] [PACMAN] upgraded nautilus (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:34] [PACMAN] upgraded p7zip (9.20.1-6 -> 9.20.1-7)
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-down.d/00-dns.sh installed as /etc/ppp/ip-down.d/00-dns.sh.pacnew
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-up.d/00-dns.sh installed as /etc/ppp/ip-up.d/00-dns.sh.pacnew
[2013-06-17 17:34] [PACMAN] upgraded ppp (2.4.5-6 -> 2.4.5-7)
[2013-06-17 17:34] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
[2013-06-17 17:34] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
[2013-06-17 17:34] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
[2013-06-17 17:34] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
[2013-06-17 17:34] [PACMAN] upgraded pulseaudio (4.0-1 -> 4.0-2)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus-common (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python2-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded sdparm (1.07-1 -> 1.08-1)
[2013-06-17 17:34] [PACMAN] upgraded sg3_utils (1.35-1 -> 1.36-1)
[2013-06-17 17:34] [PACMAN] upgraded shared-desktop-ontologies (0.10.0-1 -> 0.11.0-1)
[2013-06-17 17:34] [PACMAN] upgraded subversion (1.7.9-6 -> 1.7.10-1)
[2013-06-17 17:34] [PACMAN] upgraded sudo (1.8.6.p8-2 -> 1.8.7-1)
[2013-06-17 17:34] [PACMAN] upgraded syslog-ng (3.4.1-3 -> 3.4.2-1)
[2013-06-17 17:34] [PACMAN] upgraded usbutils (006-1 -> 007-1)
[2013-06-17 17:34] [PACMAN] upgraded webkitgtk (2.0.2-3 -> 2.0.3-1)
[2013-06-17 17:34] [PACMAN] upgraded wine (1.6rc1-1 -> 1.6rc2-1)
I'm marking this thread solved for now. If the problem arises again, I'll reopen it.

JCP4XDOBurstingEngine.java BURSTING - UNABLE TO USE SPECIFIC FILENAME MORE

Hello
I am getting Bursting Issue duplicate entry: /XXXXXX.pdf issue in Oracle XML Publisher, I think I have same issue what is explain in ML#1109893.1 and I am thinking to apply the Patch.
I NEED to Know the File location and version of JCP4XDOBurstingEngine.java in UNIX
Can Any body tell me please?
-------------Issue listed in Meta Link------
Concurrent Job Getting Java.Util.Zip.Zipexception When Bursting From Xml Publisher Report [ID 1109893.1]
Bursting code is not allowing to send mail having the same filename in attachment for multiple recipients
This is due to
Bug 8937963 - BURSTING - UNABLE TO USE SPECIFIC FILENAME MORE THAN ONCE CAUSING ZIPEXCEPTION
Thanks
Ed

Under Network Adapter -> Advanced Features. I read there
Enable MAC Address Spoofing (not checked)
Enable DHCP Guard (not checked)
Enable router advertisement guard (not checked)
At all VM states (install, copy, clone, export, import) I never touched the advanced network settings. Only the necessary changes to have networking up (aka attach to the correct, working network switch).
Also made some extra tests involving attaching / detaching a legacy network adapter (just in case) and checking the MAC Addresses on all VM's (active / inactive).
Did not figured out a MAC Address issue, all VM's had got their MAC from the pool and were different. Also the MAC address pool between 2 Hyper-V Servers was different (as expected since they have different "real" IP addressee but you never know)

Unable to use PC Companion due to required update

Similar Messages

Maybe you are looking for