Unable to view data in Physical layer of RPD

I have OBIEE installed on my local machine using Oracle 10g as the database installed on a remote machine. I am able to create the DSN and test the connection pool on my local machine.
The Call interface is OCI 10g in the connection pool. I am able to import tables into the database in the Physical layer of the repository but when I try to VIEW Data in the physical layer, it throws me an error stating,
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor at OCI call OCILogon.
nQsError: 17014 Could not connect to Oracle Database.
I have oracle 10g client installed on my local machine. I am able to view the tables and the data from SQL PLus. In OBIEE i am able to import tables but cannot view data.
Any suggestions on what could be causing this?

Sounds like one of my common issues. After you do the import, go back and check the connection pool. What I typically run into is that it has switched to the OCI connection rather than the ODBC connection used for the import, but it is still using the name of the ODBC DSN that was used for the import. Change it to the TNS name or the host:port/service and try again.
Rgds/Mark M

Similar Messages

Unable to view data in physical later from a view

Hi ALL,
WHile viewing the data from view in physical later i am getting the following error:
Oracle error code : 936, ORA-00936 missing expression.
SQL statement preparation failed.
I tried enabling the option for require fully qualified table names but still the same error.
Also update view count works fine but error is given only on view dta
Version:
OBIEE 10.1.3.4.1
Oracle 10.2.0.1.0
32 bit windows version
Any suggestions what i am missing here.
Thanks and Regards,
~Nik

Hi,
You try to build the rpd with the view and pull the view in answers and check the results. In the physical layer, you might have the logic for getting the view and you need to check its results in answer.
The table which you are using in the view, check for the data in that table in the physical layer. If thats producing results then you should not have trouble in answer.
Or you need to deploy the view.
refer-
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/b31770.pdf
Page number-103
Hope this helped/ answered.
Regards
MuRam

Admin Tool Error When Viewing Data in Physical Layer nQSError: 43093

I am trying to view the data in my Admin Tool in the Physical Layer, I am getting:
[NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 43093] An error occurred while processing the EXECUTE PHYSICAL statement.
[nQSError: 17001] Oracle Error code: 904, message: ORA-00904: "STUDENT_NUMBER": invalid identifier at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
I know why I am getting the ORA-00904 error (the data structure in the external database has changed the the column STUDENT_NUMBER does not exist). However, I am getting TNS Listener errors when trying to re-import the changed data structure (import -> through server). I have checked my ODBC connection and it seems that is not the issue. This functionality existed before (I did pull in the data structure, that is where my error is originating from). Is there something I am missing?
Any insight is appreciated.
Thank you,
Kyle

Hi,
After an upgrade, these kind of issues can happen for several reasons as below
1. Wrong OCI Call Interface. If ODBC 3.5 has been used an Interface in 10g, then the upgraded .rpd might still be using the same even when you have got a number of different options to choose from in 11g. To resolve issues of this type change the underlying database version in the physical layer of the .rpd. Once, you make this change you can see a variety of changes in the queries, performance etc for good.
2. After you did a 'View Data' on the table, go through the NQQuery.log to see the query it is firing (Yes, you need to have log level set for this user though) and analyze it from the DB end. See, if you run the query in the DB it is fast, but if it is the Admin tool that hangs up with this query. In this case check the network speed, database settings, system DSN driver etc.
Hope this helps.
Thank you,
Dhar

Cannot view data on physical layer on Oracle BI administration tool

Hi everyone
I have a schema1 and table1, table2, table3.
I have connect in odbc using the schema username and password and it was successful.
I can view the data using toad and sql oracle developer with schema username and password.
I also import the tables in Oracle BI administration tool with my schema username and password.
But my problem is i cannot view the data on the table in physical layer using my schema username and password.
Please help,
Thanks in advance
Edited by: hanson on Sep 16, 2009 7:15 AM

Hi,
I'm confused about the last bit, you did a database import to get the tables into the RPD, which worked, but now they are not showing in the phsyical layer of the rpd? They should be there under a database with the name of the ODBC/OCI that you used when you imported them.
If they are not there then this would make me think that the import of the tables has not worked, try importing just one and see what happens.
Regards,
Matt

Trunccolumn value while importing data to physical layer in RPD

Hi All,
While importing data from database, I want to trunc few column values so that I can put complex join, but I am not getting any link to do so.
Can anyone suggest me that if on database, if two tables are linked by outer join, than how can I restore the same join state in Physical layer while maintaining star schema.
Thanks in advance.

Hi,
I am using version 10.1.3.4.0
This query is a select type physical table in a physical layer of the RPD
select distinct project_no,project_name from cw_vertical_d where project_no = VALUEOF(NQ_SESSION."Project_Number")
NQ_SESSION."Project_Number" is a session non system variable.I am trying to set this variable through a dashboard prompt ( as a request variable ).
So when a user selects any value in the dashboard prompt then this session non system variable "Project_Number" should be set and then BI Server should fire a query with this value to pick the data from database.
But this report is failing with "*[nQSError: 23006] The session variable, NQ_SESSION."Project_Number", has no value definition*" error.
Don't know what is causing this?
Regards,
Vikas

No data When click view data in physical table.

Hi all,
I am a new one for OBIEE 11.1.1.5.
I met a problem when I creating a RPD.
After I load all table to physical layer, I found only one table show me no data, then I go back to check the DB and existing data in that table.
Would someone tell me how to fis this issue?
Thanks in advance.
regards,
Anne

Steps to check it your end
1)did u update rowcount for that table? try to update row count in that table and then try to view data in physical layer.
two ways--
(RPD-->tools menu-->options-->update all row count and also u can do it in physical layer -->just right click of required table and u can see update row count just select it then it will update it. after that u can try to test it.
1) if you past it screen short/error message it could help to find the root cause
2) make sure that table --> pointing connection pool info and user and password etc
Thanks
Deva

Error occurred when view the data from physical layer

Hi ,
I have created system DSN like "demo1" for excel file. After that i import the excel file into administration tool.
after that i want to view the data from physical layer. At that time ,I am getting following error .
Please resolve this issue.
Thanks in advance,

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Creating filtered view on the physical layer ussing session variable USER

Hi:
I´m creating a view on the physical layer, the view needs to be created dynamically. So depending on the user (using the session variable USER) the view is created with the data a particular user is able to see.
Fisrt I imported the table and changed it´s properties to be created through a "Select Statement" so i don´t needed to change the mapping on the bussiness model layer.
The consistency check was OK but i´m not able to see data in answers, even using the Administrator user. Have anyone tried to do this? Here is my query.
Thanks
A Garcia
Select * from D_ESTRUCTURA_RH2 where Region_ID
IN
select distinct a.REGION_ID from APP_INDPERSONAL_DM.D_ESTRUCTURA_RH2 a
inner join (
select distinct b.REGION_ID from APP_INDPERSONAL_DM.D_ESTRUCTURA_RH2 b
where exists (select 1 from APP_INDPERSONAL_DM.Autorizacion a, usuarios c
where a.app_id = 1
and a.usuario_id = c.Usuario_Id
and UPPER(c.Nombre_Usuario)=UPPER(':USER')
and a.miembro_id = 'REGION_ID'
and a.operador = '='
and (b.REGION_ID = (case when valor = 'Todo' then 0 else valor end) or valor='Todo'))
) seguridad
on
a. REGION_ID = seguridad.REGION_ID
)

whay not use the same filter in the content tab of the logical table source?
check the physical sql sent to databse using web-admin-manage sessions-view log and see if there is any unexpected behavior. also run the same query in db and see iff you get the results in databse itself.

Unable to view data in the InfoCube as well as in the query

Hi all,
I have done the Init Load into an InfoCube 0Pur_c01. The Monitoring status is Green. I checked the Qm status which is green. There is data in the PSA.
However, I am unable to view data in the InfoCube. Also when I execute the report I am receiving 'Application Data not found'error.
It looks to be a strange sitaution.
Please help me out
Regards
YJ

Hi,
I hope, some times the the unavailability of "PROCESSKEY" value for the records delivers like this.
Refer the note: 353042
And also refer the links:
Re: Problem extracting 2LIS_03_BX into 0IC_C03
Re: Records Not Added
And also search this forum with "PROCESSKEY"
With rgds,
Anil Kumar Sharma .P

How to decrease the data in physical layer

Hi to all,
physical layer have some data. but i want to decrease the data in the physical layer with out delete. how u can do. how many ways are there to do this process?
Thanks.........
Prasad

He posted the same question decrease the data in physical layer , but didn't reply anymore.
Maybe we can get to know what he actually wants in this thread...
Cheers,
C.

Unable to View Data in OOTB OBIEE11g Dashboards/Reports

Hi,
We have installed OBIEE 11.1.1.6.0. BIAPPS, Informatica and DAC for the implementation of Oracle Business Intelligence Application 7.9.6.3 in Windows 2008 Server.
Also completed the basic configuration of Oracle BI Repository Connections, Informatica server and Client configuration Steps and DAC configuration Steps.
When tried to view the OOTB Dashboards in OBIEE, the reports are throwing following errors. Please suggest us a resolution to make sure the OOTB Dashboards/Reports are up and running
Is there anything we need to do in the backend Database or something dealing with Full load using Informatica and DAC ?
The error shows that there is table or view missing/does not exist and do we need to dump the OOTB metadata(I am not sure) to Database so that the DB will have the tables ? If yes, please suggest me the process for achieving this ?
When tried to view the data and update the row count for a table in physical layer of the OOTB RPD, we are getting the same below message.
We just wanted to first view the data for the OOTB Dashboards/Reports and then proceed further with actual developmental activities involving the customizations and so on.
What configurations we need to re-check?
The reports are throwing following TNS Error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)

Looks like RPD connection pool is not pointing to Warehouse database.
For any connection issues
1. Copy your tnsnames.ora to {Oracle_BI1}\network\admin directory & {oracle_common}\network\admin directory (only the former is needed as that is the ORACLE_HOME)
2. Or instead of tnsnames.ora source entry, use the full expanded tnsnames as shown below
(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.66.173)(PORT = 1521))(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = orcl)))
OR
Call Interface: Default (OCI 10g/11g)
Data source Name->localhost:1521/XE

Unable to view data in some HR tables

Since I upgraded to SQL Developer 2.1.1.64 I have not been able to view data in the data tab for the following tables that I have run accross: per_all_people_f, per_all_assignments_f or per_all_positions_f.
Other tables that I have been using seem to be working fine, but these I need to use all the time. I get the column numbers returned, but no data or column headings.
Another co-worker that has upgraded is experiencing the same problem.

I could not get the ddl to show up on the sql tab in version 2.1.1.64, but I did run it in version 1.5.4 and this is what was returned.
-- Unable to Render DDL with DBMS_METADATA using internal generator.
CREATE TABLE HR.PER_ALL_PEOPLE_F
PERSON_ID NUMBER(10, 0) NOT NULL,
EFFECTIVE_START_DATE DATE NOT NULL,
EFFECTIVE_END_DATE DATE NOT NULL,
BUSINESS_GROUP_ID NUMBER(15, 0) NOT NULL,
PERSON_TYPE_ID NUMBER(15, 0) NOT NULL,
LAST_NAME VARCHAR2(150 BYTE) NOT NULL,
START_DATE DATE NOT NULL,
APPLICANT_NUMBER VARCHAR2(30 BYTE),
BACKGROUND_CHECK_STATUS VARCHAR2(30 BYTE),
BACKGROUND_DATE_CHECK DATE,
BLOOD_TYPE VARCHAR2(30 BYTE),
COMMENT_ID NUMBER(15, 0),
CORRESPONDENCE_LANGUAGE VARCHAR2(30 BYTE),
CURRENT_APPLICANT_FLAG VARCHAR2(30 BYTE),
CURRENT_EMP_OR_APL_FLAG VARCHAR2(30 BYTE),
CURRENT_EMPLOYEE_FLAG VARCHAR2(30 BYTE),
DATE_EMPLOYEE_DATA_VERIFIED DATE,
DATE_OF_BIRTH DATE,
EMAIL_ADDRESS VARCHAR2(240 BYTE),
EMPLOYEE_NUMBER VARCHAR2(30 BYTE),
EXPENSE_CHECK_SEND_TO_ADDRESS VARCHAR2(30 BYTE),
FAST_PATH_EMPLOYEE VARCHAR2(30 BYTE),
FIRST_NAME VARCHAR2(150 BYTE),
FTE_CAPACITY NUMBER(5, 2),
FULL_NAME VARCHAR2(240 BYTE),
HOLD_APPLICANT_DATE_UNTIL DATE,
HONORS VARCHAR2(45 BYTE),
INTERNAL_LOCATION VARCHAR2(45 BYTE),
KNOWN_AS VARCHAR2(80 BYTE),
LAST_MEDICAL_TEST_BY VARCHAR2(60 BYTE),
LAST_MEDICAL_TEST_DATE DATE,
MAILSTOP VARCHAR2(45 BYTE),
MARITAL_STATUS VARCHAR2(30 BYTE),
MIDDLE_NAMES VARCHAR2(60 BYTE),
NATIONALITY VARCHAR2(30 BYTE),
NATIONAL_IDENTIFIER VARCHAR2(30 BYTE),
OFFICE_NUMBER VARCHAR2(45 BYTE),
ON_MILITARY_SERVICE VARCHAR2(30 BYTE),
ORDER_NAME VARCHAR2(240 BYTE),
PRE_NAME_ADJUNCT VARCHAR2(30 BYTE),
PREVIOUS_LAST_NAME VARCHAR2(150 BYTE),
PROJECTED_START_DATE DATE,
REHIRE_AUTHORIZOR VARCHAR2(30 BYTE),
REHIRE_REASON VARCHAR2(60 BYTE),
REHIRE_RECOMMENDATION VARCHAR2(30 BYTE),
RESUME_EXISTS VARCHAR2(30 BYTE),
RESUME_LAST_UPDATED DATE,
REGISTERED_DISABLED_FLAG VARCHAR2(30 BYTE),
SECOND_PASSPORT_EXISTS VARCHAR2(30 BYTE),
SEX VARCHAR2(30 BYTE),
STUDENT_STATUS VARCHAR2(30 BYTE),
SUFFIX VARCHAR2(30 BYTE),
TITLE VARCHAR2(30 BYTE),
VENDOR_ID NUMBER(15, 0),
WORK_SCHEDULE VARCHAR2(30 BYTE),
WORK_TELEPHONE VARCHAR2(60 BYTE),
COORD_BEN_MED_PLN_NO VARCHAR2(30 BYTE),
COORD_BEN_NO_CVG_FLAG VARCHAR2(30 BYTE),
DPDNT_ADOPTION_DATE DATE,
DPDNT_VLNTRY_SVCE_FLAG VARCHAR2(30 BYTE),
RECEIPT_OF_DEATH_CERT_DATE DATE,
USES_TOBACCO_FLAG VARCHAR2(30 BYTE),
BENEFIT_GROUP_ID NUMBER(15, 0),
REQUEST_ID NUMBER(15, 0),
PROGRAM_APPLICATION_ID NUMBER(15, 0),
PROGRAM_ID NUMBER(15, 0),
PROGRAM_UPDATE_DATE DATE,
ATTRIBUTE_CATEGORY VARCHAR2(30 BYTE),
ATTRIBUTE1 VARCHAR2(150 BYTE),
ATTRIBUTE2 VARCHAR2(150 BYTE),
ATTRIBUTE3 VARCHAR2(150 BYTE),
ATTRIBUTE4 VARCHAR2(150 BYTE),
ATTRIBUTE5 VARCHAR2(150 BYTE),
ATTRIBUTE6 VARCHAR2(150 BYTE),
ATTRIBUTE7 VARCHAR2(150 BYTE),
ATTRIBUTE8 VARCHAR2(150 BYTE),
ATTRIBUTE9 VARCHAR2(150 BYTE),
ATTRIBUTE10 VARCHAR2(150 BYTE),
ATTRIBUTE11 VARCHAR2(150 BYTE),
ATTRIBUTE12 VARCHAR2(150 BYTE),
ATTRIBUTE13 VARCHAR2(150 BYTE),
ATTRIBUTE14 VARCHAR2(150 BYTE),
ATTRIBUTE15 VARCHAR2(150 BYTE),
ATTRIBUTE16 VARCHAR2(150 BYTE),
ATTRIBUTE17 VARCHAR2(150 BYTE),
ATTRIBUTE18 VARCHAR2(150 BYTE),
ATTRIBUTE19 VARCHAR2(150 BYTE),
ATTRIBUTE20 VARCHAR2(150 BYTE),
ATTRIBUTE21 VARCHAR2(150 BYTE),
ATTRIBUTE22 VARCHAR2(150 BYTE),
ATTRIBUTE23 VARCHAR2(150 BYTE),
ATTRIBUTE24 VARCHAR2(150 BYTE),
ATTRIBUTE25 VARCHAR2(150 BYTE),
ATTRIBUTE26 VARCHAR2(150 BYTE),
ATTRIBUTE27 VARCHAR2(150 BYTE),
ATTRIBUTE28 VARCHAR2(150 BYTE),
ATTRIBUTE29 VARCHAR2(150 BYTE),
ATTRIBUTE30 VARCHAR2(150 BYTE),
LAST_UPDATE_DATE DATE,
LAST_UPDATED_BY NUMBER(15, 0),
LAST_UPDATE_LOGIN NUMBER(15, 0),
CREATED_BY NUMBER(15, 0),
CREATION_DATE DATE,
PER_INFORMATION_CATEGORY VARCHAR2(30 BYTE),
PER_INFORMATION1 VARCHAR2(150 BYTE),
PER_INFORMATION2 VARCHAR2(150 BYTE),
PER_INFORMATION3 VARCHAR2(150 BYTE),
PER_INFORMATION4 VARCHAR2(150 BYTE),
PER_INFORMATION5 VARCHAR2(150 BYTE),
PER_INFORMATION6 VARCHAR2(150 BYTE),
PER_INFORMATION7 VARCHAR2(150 BYTE),
PER_INFORMATION8 VARCHAR2(150 BYTE),
PER_INFORMATION9 VARCHAR2(150 BYTE),
PER_INFORMATION10 VARCHAR2(150 BYTE),
PER_INFORMATION11 VARCHAR2(150 BYTE),
PER_INFORMATION12 VARCHAR2(150 BYTE),
PER_INFORMATION13 VARCHAR2(150 BYTE),
PER_INFORMATION14 VARCHAR2(150 BYTE),
PER_INFORMATION15 VARCHAR2(150 BYTE),
PER_INFORMATION16 VARCHAR2(150 BYTE),
PER_INFORMATION17 VARCHAR2(150 BYTE),
PER_INFORMATION18 VARCHAR2(150 BYTE),
PER_INFORMATION19 VARCHAR2(150 BYTE),
PER_INFORMATION20 VARCHAR2(150 BYTE),
PER_INFORMATION21 VARCHAR2(150 BYTE),
PER_INFORMATION22 VARCHAR2(150 BYTE),
PER_INFORMATION23 VARCHAR2(150 BYTE),
PER_INFORMATION24 VARCHAR2(150 BYTE),
PER_INFORMATION25 VARCHAR2(150 BYTE),
PER_INFORMATION26 VARCHAR2(150 BYTE),
PER_INFORMATION27 VARCHAR2(150 BYTE),
PER_INFORMATION28 VARCHAR2(150 BYTE),
PER_INFORMATION29 VARCHAR2(150 BYTE),
PER_INFORMATION30 VARCHAR2(150 BYTE),
OBJECT_VERSION_NUMBER NUMBER(9, 0),
DATE_OF_DEATH DATE,
ORIGINAL_DATE_OF_HIRE DATE,
TOWN_OF_BIRTH VARCHAR2(90 BYTE),
REGION_OF_BIRTH VARCHAR2(90 BYTE),
COUNTRY_OF_BIRTH VARCHAR2(90 BYTE),
GLOBAL_PERSON_ID VARCHAR2(30 BYTE),
COORD_BEN_MED_PL_NAME VARCHAR2(80 BYTE),
COORD_BEN_MED_INSR_CRR_NAME VARCHAR2(80 BYTE),
COORD_BEN_MED_INSR_CRR_IDENT VARCHAR2(80 BYTE),
COORD_BEN_MED_EXT_ER VARCHAR2(80 BYTE),
COORD_BEN_MED_CVG_STRT_DT DATE,
COORD_BEN_MED_CVG_END_DT DATE,
PARTY_ID NUMBER(15, 0),
NPW_NUMBER VARCHAR2(30 BYTE),
CURRENT_NPW_FLAG VARCHAR2(30 BYTE),
GLOBAL_NAME VARCHAR2(240 BYTE),
LOCAL_NAME VARCHAR2(240 BYTE)
, CONSTRAINT PER_PEOPLE_F_PK PRIMARY KEY
PERSON_ID,
EFFECTIVE_START_DATE,
EFFECTIVE_END_DATE
ENABLE
TABLESPACE "HR_DATA_SPACE_01"
LOGGING
PCTFREE 10
PCTUSED 40
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 48K
NEXT 8000K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PEOPLE_F_FK1 FOREIGN KEY
BUSINESS_GROUP_ID
REFERENCES HR.HR_ALL_ORGANIZATION_UNITS
ORGANIZATION_ID
) ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PEOPLE_F_FK2 FOREIGN KEY
PERSON_TYPE_ID
REFERENCES HR.PER_PERSON_TYPES
PERSON_TYPE_ID
) ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT HR_PER_DATE_OF_DEATH CHECK
(DATE_OF_DEATH >= DATE_OF_BIRTH)
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_ON_MILITARY_SRV_CHK CHECK
(ON_MILITARY_SERVICE IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_DPDNT_VLNTRY_SVCE_FLAG_CHK CHECK
(DPDNT_VLNTRY_SVCE_FLAG in ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_SECOND_PASSPORT_CHK CHECK
(SECOND_PASSPORT_EXISTS IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_FAST_PATH_EMPLOYEE_CHK CHECK
(FAST_PATH_EMPLOYEE IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_COORD_BEN_NO_CVG_FLAG CHECK
(COORD_BEN_NO_CVG_FLAG in ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_RESUME_EXISTS_CHK CHECK
(RESUME_EXISTS IN ('Y','N'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_SEX_CHK CHECK
(SEX IN ('M', 'F'))
ENABLE
ALTER TABLE HR.PER_ALL_PEOPLE_F
ADD CONSTRAINT PER_PER_EXPENSE_CHECK_SEND_CHK CHECK
(EXPENSE_CHECK_SEND_TO_ADDRESS IN ('H', 'O', 'P'))
ENABLE
CREATE INDEX HR.CSUH_PPF_ATTR12_IDX ON HR.PER_ALL_PEOPLE_F (ATTRIBUTE12 ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE
INITIAL 1M
NEXT 104K
MINEXTENTS 1
MAXEXTENTS 8192
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.CSUH_PPF_ATTR1_IDX ON HR.PER_ALL_PEOPLE_F (ATTRIBUTE1 ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 560K
NEXT 160K
MINEXTENTS 1
MAXEXTENTS 8192
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N1 ON HR.PER_ALL_PEOPLE_F (UPPER(FULL_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N2 ON HR.PER_ALL_PEOPLE_F (UPPER(LAST_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N50 ON HR.PER_ALL_PEOPLE_F (LAST_NAME ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 496K
NEXT 160K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N51 ON HR.PER_ALL_PEOPLE_F (EMPLOYEE_NUMBER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 328K
NEXT 80K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N52 ON HR.PER_ALL_PEOPLE_F (APPLICANT_NUMBER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 8K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N53 ON HR.PER_ALL_PEOPLE_F (NATIONAL_IDENTIFIER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 496K
NEXT 160K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N54 ON HR.PER_ALL_PEOPLE_F (FULL_NAME ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 0
INITRANS 16
MAXTRANS 255
STORAGE
INITIAL 760K
NEXT 240K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N55 ON HR.PER_ALL_PEOPLE_F (PARTY_ID ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N56 ON HR.PER_ALL_PEOPLE_F (NPW_NUMBER ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N57 ON HR.PER_ALL_PEOPLE_F (UPPER(GLOBAL_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N58 ON HR.PER_ALL_PEOPLE_F (UPPER(LOCAL_NAME) ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 256K
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N59 ON HR.PER_ALL_PEOPLE_F (EMAIL_ADDRESS ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
CREATE INDEX HR.PER_PEOPLE_F_N60 ON HR.PER_ALL_PEOPLE_F (GLOBAL_NAME ASC) TABLESPACE "HR_INDEX_SPACE_01"
LOGGING
PCTFREE 10
INITRANS 11
MAXTRANS 255
STORAGE
INITIAL 16K
NEXT 4M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
FREELISTS 4
FREELIST GROUPS 4
BUFFER_POOL DEFAULT
;

Unable to View Data in the table of a CDC enabled Data Store.

hi all,
I am trying to import some tables from the external metadata from my CDC enabled datastore, but after importing the tables i m unable to view the data in the table,
where as the same table in a normal datastore (Without CDC) is showing data in the Desginer.
Can anyone help me out???
is there any settings which we need to do, to see the data in a CDC enabled DS.

any help ????

Unable to View Data in using Adobe Reader (9)

We are facing an issue in one of the scenario when we generate the pdf where the data needs to displayed month-wise in columns and months are more than 15 months then the report generates successfully but we are unable to view the data even though the data is available and we are able to select/copy the data using the select tool.By default the report is opening at 5.85%. But When we generate the report for the lesser number of months say (9) then we can view the data.

You can chage your default context from Global to ABCD , whatsever name.
Goto File menu ---> User parameters -->Default Context for Designer
Specify whatever value you want .

Unable to view Data Analysis in Project Server 2007

Hi,
I am currently using Project server 2007. One of our PM is not able to view Data Analysis information which are available to other PM.
It says 'The query cannot be processed. Either the user doesn't have access to Analysis service Database or the database doesn't exist"
We checked the following.
Tools >
Internet options > Security tab > Click Trusted Sites >
Custom Level > Search for Access data source across domains and its enabled.
Kindly advice. Thanks in advance!

Hi Nathik,
You should also check that the PM in question has not been granted specific permission. If he doesn't have the "View OLAP Data" and "View Data Analysis" permissions, he will not be able to use the data analysis. Also check
that the PWA URL is in the trusted site of IE. Finally press CTRL F5 to clean IE cache. Check also that the OLAP cubes were successfully built.
A good way for you to debug is to use your admin account on his machine to see if it is a permission issue or a IE setting issue.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Unable to view data in Physical layer of RPD

Similar Messages

Maybe you are looking for