Unable to view horizontally

I am unable to view my screen in the horizontal position. IThere are symbols in the right-hand corner like something is locked but I don't know what it is. I've looked under settings but not able to associate anything listed there with this problem.

See below.
http://support.apple.com/kb/ts3805

Similar Messages

I have lots of .MOV files on my iPhone5 that I need to transfer to my PC. Using QuickTime Player 7.7.4 I am unable to view them once they have been copied to a hard drive or directly from the iPhone via USB. 1% of the time a vid is viewable

I can tranfer them to a hard drive on my PC, but am unable to view most of them using QuickTime Player 7.7.4. Doesn't matter if I'm viewing them via a USB connection to my iPhone5 or from a hard drive after the file has been copied via USB. 1% of the vids are viewable, 20% open with a black screen and audio only. The rest open with a blue, purple and green stryrated mess and no audio. Yes its a Quick Time problem I know but where do I post this question in the community? Also searching my drives for other .MOV files downloaded from the net I find the same problem with them.

Heres what I don't like about VLC, but at least the files are viewable...somewhat.
1. You can't flip the image 90degrees, needs to have a rotate feature for sure. This needs to have keyboard shortcut so vids can be rotated easily as one may have shot video horizontally and vertically in the same take.
2. Opens file to a very large window, most of it off the screen, it should REMEMBER what you resized it to, so the next time a video is played you don't have to drag the window back on the screen so you can get to the resizing handle in the lower corner.
3. Doesn't buffer while playing, so the movies are extremely erractic, starting and stopping every 3 seconds, highly annoying.
OK so maybe my PC is too slow, its a dual processor 486 Hyperrthread 2.8G but I only have 2Gigs of memory, however, bettery than 50% of the memory is still available while playing a vid (memory is checked every 4 seconds with a program), but I have 90-100% CPU useage going on while playing.
Maybe I should think about a new computer.

When I purchase movies from Itunes I am unable to view them. But when I rent a movie it is viewable. Why is this?

When I purchase movies from Itunes I am unable to view them. But when I rent a movie it is viewable. Why is this?

Heres what I don't like about VLC, but at least the files are viewable...somewhat.
1. You can't flip the image 90degrees, needs to have a rotate feature for sure. This needs to have keyboard shortcut so vids can be rotated easily as one may have shot video horizontally and vertically in the same take.
2. Opens file to a very large window, most of it off the screen, it should REMEMBER what you resized it to, so the next time a video is played you don't have to drag the window back on the screen so you can get to the resizing handle in the lower corner.
3. Doesn't buffer while playing, so the movies are extremely erractic, starting and stopping every 3 seconds, highly annoying.
OK so maybe my PC is too slow, its a dual processor 486 Hyperrthread 2.8G but I only have 2Gigs of memory, however, bettery than 50% of the memory is still available while playing a vid (memory is checked every 4 seconds with a program), but I have 90-100% CPU useage going on while playing.
Maybe I should think about a new computer.

Unable to view options in TOAD

Hi,
Please excuse me if my question is not related to this category ....
My problem is unable to view the EDITOR & SCHEMA BROWSER in different tabs at the bottom
And whenever i open the schema browser it's getting overlapped on to the EDITOR ....
So each and every time i need to minimize one tab and use the other...
Please tell me the options to set this proper...
Thank you

YOu can use the option Tile horizontal or tile vertical in the window tab of the Toad. by default it will always overlap and there will be task bar below the browser from where you can toggle between the opened windows in Toad.
But for now youcan use tile horizontal or tile vertical.
Regards

Unable to view options

I am unable to view options like for my iphone and view options, it just shows the check boxes and not the text, I think it is because because the background is black and the text is also black. Does anyone know how to fix this? And dont send me to the support tab.
Thanks

YOu can use the option Tile horizontal or tile vertical in the window tab of the Toad. by default it will always overlap and there will be task bar below the browser from where you can toggle between the opened windows in Toad.
But for now youcan use tile horizontal or tile vertical.
Regards

Unable to view scrollbars

Hello,
I have a JTree in the left Panel and when I try to expand the tree,
I am unable to view the scrollbars both on horizontal and vertical sides. Here is my code
leftPanel = new JPanel();
leftPanel.add(ft);
scrollLeft = new JScrollPane(leftPanel,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
//scrollLeft.scrollRectToVisible(leftPanel.getBounds());
scrollLeft.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
rightPanel = new JPanel();
rightPanel.add(new JButton("I am in right"));
scrollRight = new JScrollPane(rightPanel);
//splitPane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT,scrollLeft,scrollRight);
splitPane = new JSplitPane();
splitPane.setLeftComponent(leftPanel);
splitPane.setRightComponent(rightPanel);
splitPane.setDividerLocation(280);
JScrollBar scrollbar = scrollLeft.getVerticalScrollBar();
scrollbar.setValue(scrollbar.getMaximum());
getContentPane().add(splitPane);what is the problem? Please correct me.
Thanks

I think you have to put the JScrollPane in the JPanel like this:
leftPanel.add(scrollLeft);
I have something like that:
panel.setLayout(new java.awt.BorderLayout());
panel.add(scrollLeft, java.awt.BorderLayout.CENTER);
I hope it help you!!

Unable to View .mod files in Photoshop Elements 11, can see they are there but no picture, I import them into Premiere and all OK ?

I have hundreds of .mod files which are supported but I am unable to view them on my Adobe Photoshop Elements 11. I cant see the picture icons as pictures or see the vision when i select them? I am running the latest Windows 8.1 PC with heaps of Ram and memory. If I import the files into Premiere they play fine?

Thanks Curt and 'Mylenium'
I did re-set the prefs - but to no avail
I checked and my graphics driver and audio is all up to date.
No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
Cliff

Unable to View Data in the table of a CDC enabled Data Store.

hi all,
I am trying to import some tables from the external metadata from my CDC enabled datastore, but after importing the tables i m unable to view the data in the table,
where as the same table in a normal datastore (Without CDC) is showing data in the Desginer.
Can anyone help me out???
is there any settings which we need to do, to see the data in a CDC enabled DS.

any help ????

Unable to view streaming video

I could view a streaming video using following address rtsp://138.133.71.2:554/file/ when using Quicktime 6. However, I have upgraded to Quicktime 7 Pro and I am now unable to view the streamed video. I am using Windows 2000 on a PC and streaming the video from a camera through a DSP Board to the PC. (The PC is not connect to the Internet)

Download the Flash Player Uninstaller and Flash Player Plug-in (All other browsers) by right clicking and selecting "Save Link as".
Close Firefox.
Run the uninstaller.
Run the installer to replace the plugin.
Open Firefox and click Tools>Add-ons.
Check under Plugins that Flash Player is "always activated".
If it still won't load, check your other plugins. There may be an ad blocker that's preventing it.

Unable to View Data in using Adobe Reader (9)

We are facing an issue in one of the scenario when we generate the pdf where the data needs to displayed month-wise in columns and months are more than 15 months then the report generates successfully but we are unable to view the data even though the data is available and we are able to select/copy the data using the select tool.By default the report is opening at 5.85%. But When we generate the report for the lesser number of months say (9) then we can view the data.

You can chage your default context from Global to ABCD , whatsever name.
Goto File menu ---> User parameters -->Default Context for Designer
Specify whatever value you want .

Unable to view data in the InfoCube as well as in the query

Hi all,
I have done the Init Load into an InfoCube 0Pur_c01. The Monitoring status is Green. I checked the Qm status which is green. There is data in the PSA.
However, I am unable to view data in the InfoCube. Also when I execute the report I am receiving 'Application Data not found'error.
It looks to be a strange sitaution.
Please help me out
Regards
YJ

Hi,
I hope, some times the the unavailability of "PROCESSKEY" value for the records delivers like this.
Refer the note: 353042
And also refer the links:
Re: Problem extracting 2LIS_03_BX into 0IC_C03
Re: Records Not Added
And also search this forum with "PROCESSKEY"
With rgds,
Anil Kumar Sharma .P

Unable to view the "Discovery Application" section under studio.

Hello,
I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
Which is obviously used for creating and managing the applications.
But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
Can anyone kindly let me know why I am unable to view the discovery application section till now?
Thanks.

I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs?

Visual Studio 2010 Upgrade - Unable to view some reports

I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
Does anyone have any ideas about what could cause some of the reports to throw this exception?

OK, here is the link to the thread I am replying to Visual Studio 2010 Upgrade - Unable to view some reports
And here is what I posted to start the thread that I am replying to:
I converted an application that had been developed in VS2005 so that it would run in VS2010. The application contains several Crystal Reports. Now when I debug the application I can only view some of the reports. With the others I get an exception with the message "Unable to find the report in the manifest resources. Please build the project and try again."
The ones that work and the ones that don't all have the Build Action set to Embedded Resource. I have tried removing a report from the project and then adding it back, but that made no difference. A new report displayed fine.
Does anyone have any ideas about what could cause some of the reports to throw this exception?
As you can see, I have described the exception that occurs when I try to view some, but not all, or the reports while debugging. I have also tried deleting a report and adding it back in but it made no difference.
Is this enough information?

Photoshop Elements 8 - unable to view RAW files

Hi.
I have been using Adobe Elements 8 since it came on to the market. I use Canon Cameras and my latest one being a 1Dmkiv.
When I got the Canon 1D I down loaded the appropriate RAW file I think it was 5.6 and followed the instructions and changed the Camera Raw.8bi file and it worked perfect and I was able to view and edit Raw files.
Last week my computer failed and I have had a new hard drive and hence have had to upload all my software. I installed Elements 8 back onto the computer and reinstalled the photograph catalogues I had backed up within Elements 8 before the computer crash.
When the photographs in the catalogues were viewed only JPEG files were visible, the raw files are shown as a a grey negative with a zig zag across them. I thought that I would have to upload again the lates RAW update, which I did and went through all the instructions as given by Adobe. I changed the Raw.8bi file within Elements 8 and I still am unable to view any Raw files within Elements 8. I desperately need access to these files. Any help would be appreciated
Best regards

Thanks so much for your reply. My problem appeared to be that most of the thumb
nails had lost their links and I had to individually update the thumbnails from within the program. It wasn't a problem
with the RAW file not being updated.

For weeks I have been viewing a doggy day care via their web cam. This weekend I upgraded to Lion and have been unable to view the center since. I get an error message for java webcam class not found. All of my software is up to date--suggestions?

For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?

Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards.

Unable to view horizontally

Similar Messages

Maybe you are looking for