Unacceptable error message on Curve

My phone is giving "uncaught acception index 21>=21"  on reboot and than goes to a white screen with APP error 523 message. I have tried to reboot it without the sim also thinking it might be due to sim error but the same message continues. Any suggestions or solutions wthout giving it to BB service center for total programme update and loose all my unsaved data.... Thanks in adavnce..

Hi there!
There's pretty much no diagnosing those -- they are the equivalent of the random errors in Windows for which tracing the root cause is fruitless. Basically, these are the last out in the programming code -- some event occurred for which there is no handler in the code. The fix is a code update that handles the event...but, again, knowing what the event is is pretty much impossible. So, there are a few things to try:
Sometimes, the code simply becomes corrupt and needs to be refreshed -- just like a reboot:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
There might be an updated code set from the carrier -- check them via this portal:
 http://na.blackberry.com/eng/support/downloads/download_sites.jsp
The toughest possible cause is a badly behaving app. To find it, there are a couple of options. One is to see if you can read the log file:
Go to the home screen. Hold down the key and type 'lglg'. (You will not see anything while you type).This will bring up the log file. Scroll down (probably many pages) untill you see a line that says 'uncaught execption'. Click on this line. The name of the app will be in the info.
The other method is to remove apps one at a time, waiting a while in between (I usually recommend a week), until the problem ceases...thereby discovering the offending app.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Email Error Message on Curve 8900

    Hi
    I have a curve 8900, when I receive emails and I select one to read I keep getting message "no delivery network error", then it will open the email.
    I had this same message on my previous curve 8520 and was told by a local phone shop that it was a software error.
    I have recently changed from O2 to Vodafone and only seemed to have notice the message since I transferred to Vodafone.
    Any help or advise would be appreciated.
    Thanks 

    Hi
    I have a curve 8900, when I receive emails and I select one to read I keep getting message "no delivery network error", then it will open the email.
    I had this same message on my previous curve 8520 and was told by a local phone shop that it was a software error.
    I have recently changed from O2 to Vodafone and only seemed to have notice the message since I transferred to Vodafone.
    Any help or advise would be appreciated.
    Thanks 

  • Can't access dialling screen and I keep getting a pop-up error message on my Curve 3G

    Good day
    I can neither make nor receive calls on my Blackberry Curve 3G 9300. Everytime I press the green dial button or try dialling from the phonebook the screen freezes. I have tried rebooting the phone but it is still not getting sorted. The only way in which I can make calls is via my PC via bluetooth which is really impractical. 
    I also keep getting an error message reading:
    uncaught exception applicationregistry waitfor (0x7c802477365c3985) timeout
    PLEASE ASSIST URGENTLY. 
    Thank you!!!

    Contact your carrier; they are the only ones who can resolve this for you. Use the Carrier Luke,
    "Fun with the Sun, MEta"

  • 8330 Curve Error message 00x80040fb3

    My 8330 Curve is giving me an error message while syncing with my computer. I've narrowed it down (by syncing each thing individually) to when the address book is time to sync. It gets about half way through and then comes up with a box that says
    "Error message: 00x80040fb3"
    Does anyone know what this means or have gotten it fixed? I really don't want to pay $40 for a one time only fix with a technician if it's something I could do myself.
    Please let me know anything!

    410chad wrote:
    My 8330 Curve is giving me an error message while syncing with my computer. I've narrowed it down (by syncing each thing individually) to when the address book is time to sync. It gets about half way through and then comes up with a box that says
    "Error message: 00x80040fb3"
    Does anyone know what this means or have gotten it fixed? I really don't want to pay $40 for a one time only fix with a technician if it's something I could do myself.
    Please let me know anything!
    Hi and Welcome to the Forums!
    You got your error code wrong, btw, by one digit...only one leading zero at the beginning. But, no matter, I still managed to find the relevant KB...see here:
    KB14818 Error Encountered 0x80040FB3, Check Documentation error appears during a wired synchronization
    Hope that helps!
    Message Edited by sdgardne on 07-30-2009 06:38 PM
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Web Serice -error message-Unaccepted content type ????

    Hi all,
    I created a webservice for Function module and when i am passing values in the Web Service i am getting error message ...
    An error has occurred. Maybe the request is not accepted by the server:
    <b>Unaccepted content type</b> (text/html;charset=utf-8) !
    <b>Request:</b>POST /sap/bc/srt/rfc/sap/ZBAMS_WS_EMPLOYEE_UPDATE?sap-client=200 HTTP/1.1
    Host: tybl102028.tyb.kpmgbsc.net:8002
    Content-Type: text/xml; charset="UTF-8"
    Connection: close
    Content-Length: 657
    SOAPAction: ""
    <?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap
    /features/session/"><enableSession>true</
    enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:ZbamsEmployeeUpdate xmlns:ns1='urn:sap-com:document:sap:soap:functions:mc-style'><BigDate>2006-04-01</BigDate><EmpId>00000012</EmpId><EndDate>2006-04-24</EndDate><WbsElement></WbsElement></ns1:ZbamsEmployeeUpdate></SOAP-ENV:Body></SOAP-ENV:Envelope>
    <b>Response:</b>
    HTTP/1.1 500 Internal Server Error
    content-type: text/html;charset=utf-8
    content-length: 3130
    can any one help me whats wrong?
    Thanks for ur time.
    Murali.

    Hi I am testing this using j2ee.
    let me explain more information..
    I created BAPI  and for that bapi I crated Web Service and, and when I test from BAPI it works fine.. so now I am testing this from web service, after passing values in web service I am checking in debug mode, I have a call transaction statement in my BAPI code... once cursor comes into the call transaction statement it skips executing further statement and coming out from the debugging mode(it happens only when I go to debug from passing values in web service, and I tested call transaction giving values  A and N modes), if passing values directly in BAPI then it works fine no issues.
    please let me know if any ideas.
    Thanks for u r time
    Murali.

  • Facebook games not loading, Error message was SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert).

    The facebook game not loading properly, it getting struck, when i refresh the page Error message was showing. The error message was
    "Secure Connection Failed
    An error occurred during a connection to imabigfanof.criminalcasegame.com. SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site. "
    I had reset the firefox, but it doesn't fix my problem. I had checked same page in other browsers, like Google Chrome & Internet Explorer. I didnot get problem in that browser, The problem coming in firefox browser only.
    Firefox is my best web browser, Please help me to fix this problem.
    Waiting for ur kind reply...

    Thank you for the advice, I do run Kaspersky and will disable it to see if this will work and report back so that if there is others that are experiencing the same problem can also bennefit from this advice

  • Curve 9300 error message: there was a problem during installati​on. Please try again when using app world

    hi 
    I have a curve 9300 using os 6 and the latest app world 2.1.1.. something
    when i try to download apps it initiates the download then after a couple of seconds after starting it shows the error message "there was a problem during installation. Please try again"
    i have tried ALL the suppourt forums (KB26671 and KB30074) and suggestions/threads and called my network but none have worked. 
    these were reinstallign app world, making a new blackberry id as the other email address was associated with an old blackberry, security wiping the phone then restoring it and entering the new bb id, changing the date to 2014 and then hard wiping the phone and restoring it
    i have twitter, facebook and bbm ect apps but these are RIM made i think and already preinstalled. everything else on the phone works fine
    i have tried both wifi and network internet and battery pull
    i really dont know what else to try or who else to contact to fix it. very annoying paying for a service you cant even use!
    any help or more ideas would be great! 
    thanks

    Hello carckberrypie,
    In this case i would recommend wiping the BlackBerry smartphone. To do this we would need to back up the BlackBerry smartphone http://bit.ly/aSediX
    Once backed up please follow the link below to perform a security wipe of your BlackBerry smartphone.
    Link: http://www.blackberry.com/btsc/KB14058
    Test the BlackBerry smartphone and proceed with a selective restore as outlined below.
    Link: http://www.blackberry.com/btsc/KB10339
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • BB Curve 3 9300 Error Message on App World

    BB Curve 3 9300 Error Message on App World

    Hi and Welcome to the Community!
    A little hint about the error message might help...your sparse description leaves us to do nothing but guess. Please post the specific error message, all of it, including all punctuation.
    Thanks.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry curve syncing issue error message KB19454

    I have experienced this problem for some time now. It was syncing no problem and then one day this problem reared its ugly head. I read the few solutions offered elsewhere and here but none of them have helped me: I have rebooted my BB Curve several times and I also wiped the device a couple of times, and started off from scratch, but to no avail. HASSLE! Reinstalling apps and everything else.....It seems all the trouble started when I downloaded RIM's newly minted just for mac's Blackberry Desktop Manager. Wonderful. If a person could sync wirelessly (without having to purchase Missing Sync, and I see it has similar problems) perhaps I could get around this problem)
    Actually, the recent error message is the most information I've gotten. Before I just got that that the device was not recognized. I tried gassing BB Desktop Manager altogether and going back to the Palm desktop, but now my Palm Desktop doesn't work either.
    It's almost as if the cord is loose, so I tried a different cord, a different port, but that didn't do anything either. I really like the device, but perhaps a change is in order. A Palm Pre maybe? an iPhone that doesn't argue with my mac? So any other ideas

    If you don't know where to find these two items, it will probably be a good idea for you to at least glance through the iPhone user guide.
    The Info tab for your iPhone sync preferences with iTunes is availlable where the other tabs for your iPhone sync preferences with iTunes are located. With your iPhone connected to iTunes and available under Devices in the iTunes source list, select your iPhone under Devices in the iTunes source list to make the Info tab and all other tabs for your iPhone sync preferences with iTunes available in the main iTunes window. This is where you make your selections for the various items to be synced or transferred to your iPhone.
    Under the Info tab for your iPhone sync preferences with iTunes, deselect sync email accounts followed by selecting Apply. If you have already created and are accessing your MobileMe account on your iPhone, this does not need to be selected under the Info tab for your iPhone sync preferences with iTunes.

  • Sync BB curve 9300 to outlook window7 gives an error message

    After 150 records of 700 I get the following err message: CRTranRec::GetLinkedRecordID: Invalid record ID
    The sync is stopped.
    What is the problem?

    Hello zivasus
    Welcome to BlackBerry Support Community Forums
    Regarding this error message have a look at this RIM's Knowledge Base 
    KB31008 : Error "CRTranRec : : GetLinkedRecordld : Invalid linked record Id " is displayed when synchronizing with the BlackBerry Desktop Software.
    In addition look at this thread CRTranRec:: GetLinkedRecordId
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Curve 8520 synchronis​ation with outlook error message

    trying to synchronise my blackberry with my outlook and keep getting an error message saying "no available messege stores"  anyone help thanks Paul

    Hi.  I messaged yesterday that I had the same error @ line 131 issue (could not sync calendar entries that have reoccurence in their make-up).  Non-reoccuring items did sync.  Blackberry support was absolutely of no use (3 hours on the phone with them resulted in absolutely no solution)
    Today i did all sorts of stuff to overcome or bypass the problem, but basically could not solve it.  SO....I uninstalled BB desktop software - and then re-installed it....problem solved!  Don't ask how or why.....but it worked for me

  • Curve 9320 error message

    I have Error 545 message on my screen have tried to download Desktop manager to my Mac but it will not download says I need 10.6 version ugggggg can some kind person help Pzzzz

    Hi and Welcome to the Community!
    Eliza18 wrote:
    I have Error 545 message on my screen
    Here is a KB that discusses that error:
    KB12077 "JVM error 545" appears on the BlackBerry smartphone
    Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
    Eliza18 wrote:
    have tried to download Desktop manager to my Mac but it will not download says I need 10.6
    Not at all sure why you tried that, given the KB recommendations, but whatever...compatibility requirements are what they are...there's nothing anyone here can do to change them. To use the Desktop Software, you have to be running a computer that is compatible, which yours is not.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 8330 curve error message - JVM error 545

    Hey Anyone? I Got a white screen with this error message. On the advice of a tech guy I downloaded the latest desktop mgr.(v4.7) and the latest software from my wireless provider (4.3). I ran thru the uninstall - reinstall application and ended up with the message "unable to reconnect to device during multi-stage load operation". What am I doing wrong?

    There is application called Jlcmder
    use it to erase all the application from your phone. After Wiping the
    the device will reboot to a white screen with a '507' error. Then
    connect your device with desktop manager to have a clean install of OS
    4.5.
    Click this link for knowing details about OS Upgradation.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Error message when trying to use bluetooth connections

    Windows 7
    Torch 9800 and Curve 8310 and Playbook
    I'm trying to send using bluetooth to all of the above and get the error message "Abort FTP operaton, no services found"
    I can see all the devices on the laptop, and on each device I can see the laptop.
    Any help gratefully received, thanks.

    Hi Inedia,
    Are you trying to send files from the computer to the BlackBerry® Torch™ 9800 smartphone, the BlackBerry® Curve™ 8310 smartphone, and BlackBerry® PlayBook™ tablet? 
    Currently Bluetooth® file transfer is supported only between 2 BlackBerry® smartphones. This KB article should provide more information. "How to transfer a file using Bluetooth technology between two BlackBerry smartphones"
    http://bbry.lv/KNI0Rj
    Thanks.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Error message when trying to log on to Desk Top Manager

    I tried to log on to my Desktop manager last night and keep getting this same message.
    The WIndows Installer keeps coming up and it is looking for the file "Blackberry 7130e.msi".  The Blackberry that I had previous to the Curve was a 7130, but I have not had that BB for almost a year.  I have used desktop manager many times since I got the Curve with no problems.
    My service provider is U.S. Cellular and I have contacted them.  The data tech I talked with has never heard of this problem so was unable to help.
    I have completely uninstalled all versions of the desktop manager.  Reinstalled the most current version and still I am getting this message when I try to open the DT Manager.
    I then uninstalled 5.1.  The 4. is still showing up in my list of programs when I go to the windows Install/Unistall program.  I try to get rid of the 4. program and the windows installer comes up.  I click on cancel and it appears that the program uninstalled.  If I close Install/Uninstall and then reopen it the program is right there back on the list and has not uninstalled.
    I have also searched my whole computer and the installation disk that came with the 7130 and the Curve and the file it keeps requesting is no where to be found.
    I have also tried downloading the 7130e download from the BB website and I keep getting the same error message and nothing will install.
    I hope you have a solution as I have spent well over 3 hours trying to fix this just so I can use this program with my phone.  I am beginning to think I should have gotten an HTC Windows Mobile Device instead.

    Hi and welcome to the forums!
    A couple of places for you to visit: Blackberry 101    Tips & Tricks
    See if this kb helps:   http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB12847&slic...
    I'm not sure that you saw the error msg. included in the kb, but it discusses removing .msi files from previous installations of DM.   Post back and let us know how it goes.
    Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Maybe you are looking for