Unacceptable performance of Automap in TopLink Workbench and JDev

Is anyone out there actually using the Automap functionality?
In both versions 9 and 10 I have found it to be hit and miss. Some object automap instantly and others take eons and peg my CPU.
I don't really understand what could possibly be taking up sooo many cycles. In these cases I swear I won't use the feature again, but it is so fast at other times that I'm always tempted to do it.
Is anyone aware if Oracle is planning to do anything about this? I will open a TAR for this, but was interested to here some feedback from the general forum.
Thanks,
-Glenn.

Glenn,
I use a fair bit in both JDeveloper and the Workbench with small projects ranging from 1 to 20 descriptors without any noticeable performance degradation. Of course, most of my work is with 10.1.3 previews and builds.
Are your issues typically with larger quantity of descriptors, greater complexity, or are you seeing this across the board?
Doug

Similar Messages

  • Missing Descriptior with Toplink 1013 and Jdev 1013

    Hi guys,
    I keep getting the following error when I try to run my project:
    Exception [TOPLINK-6007] (Oracle TopLink - 10g release 3 (10.1.3.0.0) (Build 050912)): oracle.toplink.exceptions.QueryException
    Exception Description: Missing descriptor for
    The project is a Web Application with a Model and View/Controller projects. The Model has a Toplink project in it and I created the mappings, classes, and the sessions.xml for it.
    What am I doing wrong? This seems to work in Jdev 1012.

    * Does the sample client work ok when you use sessions.xml?
    * What is the sequence of steps you are taking to create view project and in which project you are getting the errors? A detailed sequence of steps will be helpful in reproducing this issue.
    * If you are running into this issue in your view project using ADF and your use case simply involves reading objects, perhaps you can try writing a plain sample client in java yourself to simulate the use case and see whether this client works.
    Also
    * Take a look at my response to your other question at Mutliple writeable mappings in Jdev 1013 and setup your mappings correctly.
    * If you are running into this issue in the view project with the use of ADF, then try regenerating the datacontrol and recreating your view project. Make sure your logging in the sessions.xml is turned on.
    Hope this helps.

  • EJB3.0 and toplink workbench

    Hi,
    I have a question to the new TopLink release and EJB 3.0 support.
    Is it possible that TopLink workbench generates EJB 3.0 persistence classes from database with annotations or mappings in the project.xml?
    I don't want to write all the persistence classes with annotations by myself.

    EJB 3.0's Java Persistence API (JPA) is not supported directly from the workbench. You can however take your existing TopLink XML config files (sessions and Map/Project) and use them with JPA (no annotations).
    When working with annotations it becomes more relevant to be doing these operations within an IDE. To this end we have already delivered early support for JPA in JDeveloper. You can generate a persistent entity model from tables with full annotations and then generate a session bean facade exposing the persistence operations as needed.
    For those of you not using JDeveloper we are also leading a project to add this functionality to Eclipse within WTP. For more information on project dali go to www.eclipse.org/dali.
    Doug

  • Toplink workbench exception

    One of our teams is having the following problem:
    when we refresh one class in toplink workbench to add a new field, we can no longer save. we get the following error. What is curious, is that our local classes get listed in the workbench. I'm not sure exactly what this means, and the classes referred to in the stack trace are our local framework classes. Has anyone seen something like this before, or have an idea of what it might mean?. Once again the error below is shown in the workbench not runtime.
    LOCAL EXCEPTION STACK: EXCEPTION [TOPLINK-6004] (TopLink - 4.0 (Build 345)): com.webgain.integrator.exceptions.QueryException EXCEPTION DESCRIPTION: The object [BldrClass[3c8807] (com.cna.exceptions.CfRuntimeException, modifier = public, array=, implements [BldrClass[3aa0bb] (com.cna.exceptions.CiException, modifier = public abstract interface, interface, array=, implements [])], extends RuntimeException)], of class [class com.webgain.workbench.model.meta.BldrClass], with identity hashcode (System.identityHashCode()) [3,966,983], is not from this UnitOfWork object space, but the parent session's. The object was never registered in this UnitOfWork, but read from the parent session and related to an object registered in the UnitOfWork. Ensure that you are correctly registering your objects. If you are still having problems, you can use the UnitOfWork.validateObjectSpace() method to help debug where the error occurred. For more information, see the manual or FAQ. QUERY: WriteObjectQuery(BldrClass[3c8807] (com.cna.exceptions.CfRuntimeException, modifier = public, array=, implements [BldrClass[3aa0bb] (com.cna.exceptions.CiException, modifier = public abstract interface, interface, array=, implements [])], extends RuntimeException))      at com.webgain.integrator.exceptions.QueryException.backupCloneIsOriginalFromParent(QueryException.java:143)      at com.webgain.integrator.publicinterface.UnitOfWork.getBackupClone(UnitOfWork.java:1284)      at com.webgain.integrator.publicinterface.UnitOfWork.getBackupCloneForCommit(UnitOfWork.java:1316)      at com.webgain.integrator.queryframework.ObjectLevelModifyQuery.prepareForExecution(ObjectLevelModifyQuery.java:144)      at com.webgain.integrator.queryframework.WriteObjectQuery.prepareForExecution(WriteObjectQuery.java:102)      at com.webgain.integrator.queryframework.DatabaseQuery.execute(DatabaseQuery.java:473)      at com.webgain.integrator.publicinterface.Session.internalExecuteQuery(Session.java:1869)      at com.webgain.integrator.publicinterface.UnitOfWork.internalExecuteQuery(UnitOfWork.java:1962)      at com.webgain.integrator.publicinterface.Session.executeQuery(Session.java:1034)      at com.webgain.integrator.publicinterface.Session.executeQuery(Session.java:988)

    The easiest workaround to this problem is normally to perform a "save as" of the project, which will normally work.
    TopLink - 4.0 (Build 345) - is a fairly old release, you may wish to contact support to get the latest patch for this release, or to upgrade to a newer version of the product.

  • StringIndexOutOfBoundsException in o.toplink.workbench.addin.mapping.spi.db

    Hi All
    I'm using JDeveloper 11g. When I started JDeveloper, the following error appear.
    Unexpected severe error has occurred in JDeveloper
    The program may be unstable, which could result in data loss. Decide how you want to proceed and click OK.
    View errory details.
    +Invoking command: Toggle Comments[ from oracle.ide.ceditor.CodeEditor ]+
    +Performing action Undo Toggle Comments[ from oracle.ide.ceditor.CodeEditor ]+
    +Performing action Close All[ from oracle.ide.ceditor.CodeEditor ]+
    An error was detected while opening a persistence file.
    java.lang.StringIndexOutOfBoundsException: String index out of range: -1
    j.lang.String.substring(String.java:1932)
    j.lang.String.substring(String.java:1905)
    o.toplink.workbench.addin.mappings.spi.db.JDeveloperDBObject.getCatalogName(JDeveloperDBObject.java:41)
    o.toplink.workbench.mappingsmodel.db.MWDatabase.refreshTables(MWDatabase.java:1157)
    o.toplink.workbench.mappingsmodel.db.MWDatabase.refreshRelations(MWDatabase.java:1142)
    o.toplink.workbench.mappingsmodel.db.MWDatabase.refresh(MWDatabase.java:1074)
    o.toplink.workbench.mappingsmodel.sessions.MWSessionsProject.initializeDatabases(MWSessionsProject.java:501)
    o.toplink.workbench.mappingsmodel.sessions.MWSessionsProject.initialize(MWSessionsProject.java:487)
    o.toplink.workbench.mappingsmodel.sessions.MWSessionsProject.<init>(MWSessionsProject.java:153)
    o.toplink.workbench.addin.application.SessionsProjectContext.buildTopLinkSessionsProject(SessionsProjectContext.java:63)
    o.toplink.workbench.addin.application.SessionsProjectContext.initialize(SessionsProjectContext.java:101)
    o.toplink.workbench.addin.application.AbstractTopLinkContext.<init>(AbstractTopLinkContext.java:51)
    o.toplink.workbench.addin.application.SessionsProjectContext.<init>(SessionsProjectContext.java:45)
    o.toplink.workbench.addin.application.ContextManager.openTopLinkSessions(ContextManager.java:1376)
    o.toplink.workbench.addin.application.ContextManager.openTopLinkContexts(ContextManager.java:1325)
    o.toplink.workbench.addin.TopLinkProjectChangeListener$TopLinkContextWorker.run(TopLinkProjectChangeListener.java:370)
    j.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
    j.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
    j.util.concurrent.FutureTask.run(FutureTask.java:138)
    j.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    j.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    j.lang.Thread.run(Thread.java:619)
    Thankyou.
    Thiensu2810

    I am using 10.1.3.0.1 and for me there are still grave issues with interface management in the WB.
    First of all, I get a NullPointerException when clicking the "add" Button on the interface descriptor's implementor list after having refreshed all classes by selecting the project packages and doing "refresh classes" from the context menu. I have to close and restart the WB in order to be able to continue working.
    Then, some attributes which are not common among the implementor classes are detected as common query keys.
    Lastly, if I use variable one-to-one relationships and de-select some class indicator values, the de-selected implementor descriptors are displayed as selected after workbench restart again, showing me errors about missing class indicator values for selected descriptors (Error 0055).

  • Problem migrating Toplink Workbench project from 9.0.4.5 to 10.1.3.1.0

    Hi all,
    I am having problems migrating my Toplink Workbench project from 9.0.4.5 to 10.1.3.1.0! I used the Toplink Workbench to open and convert the existing project. The conversion succeeded, but when I tried to export the mappings I got this:
    java.lang.NullPointerException
         at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalPrimaryKeyPolicy.adjustRuntimeDescriptor(MWRelationalPrimaryKeyPolicy.java:174)
         at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalTransactionalPolicy.adjustRuntimeDescriptor(MWRelationalTransactionalPolicy.java:85)
         at oracle.toplink.workbench.mappingsmodel.descriptor.MWDescriptor.buildRuntimeDescriptor(MWDescriptor.java:423)
         at oracle.toplink.workbench.mappingsmodel.descriptor.MWMappingDescriptor.buildRuntimeDescriptor(MWMappingDescriptor.java:860)
         at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalClassDescriptor.buildRuntimeDescriptor(MWRelationalClassDescriptor.java:791)
         at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWTableDescriptor.buildRuntimeDescriptor(MWTableDescriptor.java:955)
         at oracle.toplink.workbench.mappingsmodel.project.MWProject.buildRuntimeProject(MWProject.java:932)
         at oracle.toplink.workbench.mappingsmodel.project.MWProject.exportDeploymentXML(MWProject.java:804)
         at oracle.toplink.workbench.mappingsplugin.ProjectDeploymentXmlGenerationCoordinator.exportProjectDeploymentXml(ProjectDeploymentXmlGenerationCoordinator.java:46)
         at oracle.toplink.workbench.mappingsplugin.ExportDeploymentXmlAction.execute(ExportDeploymentXmlAction.java:27)
         at oracle.toplink.workbench.framework.action.AbstractFrameworkAction.actionPerformed(AbstractFrameworkAction.java:134)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
         at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
         at java.awt.Component.processMouseEvent(Component.java:5100)
         at java.awt.Component.processEvent(Component.java:4897)
         at java.awt.Container.processEvent(Container.java:1569)
         at java.awt.Component.dispatchEventImpl(Component.java:3615)
         at java.awt.Container.dispatchEventImpl(Container.java:1627)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
         at java.awt.Container.dispatchEventImpl(Container.java:1613)
         at java.awt.Window.dispatchEventImpl(Window.java:1606)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:480)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Anyone seen this error before? This is very critical for us. Please help. Thanks.
    Regards,
    gkk1969

    I am seeing the same problem when i try to do Export to Java Source
    java.lang.NullPointerException
         at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalPrimaryKeyPolicy.adjustRuntimeDescriptor(MWRelationalPrimaryKeyPolicy.java:174)
         at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalTransactionalPolicy.adjustRuntimeDescriptor(MWRelationalTransactionalPolicy.java:85)
         at oracle.toplink.workbench.mappingsmodel.descriptor.MWDescriptor.buildRuntimeDescriptor(MWDescriptor.java:423)
         at oracle.toplink.workbench.mappingsmodel.descriptor.MWMappingDescriptor.buildRuntimeDescriptor(MWMappingDescriptor.java:860)
         at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWRelationalClassDescriptor.buildRuntimeDescriptor(MWRelationalClassDescriptor.java:791)
         at oracle.toplink.workbench.mappingsmodel.descriptor.relational.MWTableDescriptor.buildRuntimeDescriptor(MWTableDescriptor.java:955)
         at oracle.toplink.workbench.mappingsmodel.project.MWProject.buildRuntimeProject(MWProject.java:932)
         at oracle.toplink.workbench.mappingsmodel.project.MWProject.exportProjectSource(MWProject.java:824)
         at oracle.toplink.workbench.mappingsplugin.ProjectSourceGenerationCoordinator.exportProjectSource(ProjectSourceGenerationCoordinator.java:68)
         at oracle.toplink.workbench.mappingsplugin.ExportJavaSourceAction.execute(ExportJavaSourceAction.java:31)
         at oracle.toplink.workbench.framework.action.AbstractFrameworkAction.actionPerformed(AbstractFrameworkAction.java:134)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
         at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
         at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
         at java.awt.Component.processMouseEvent(Component.java:5100)
         at java.awt.Component.processEvent(Component.java:4897)
         at java.awt.Container.processEvent(Container.java:1569)
         at java.awt.Component.dispatchEventImpl(Component.java:3615)
         at java.awt.Container.dispatchEventImpl(Container.java:1627)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
         at java.awt.Container.dispatchEventImpl(Container.java:1613)
         at java.awt.Window.dispatchEventImpl(Window.java:1606)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

  • Using TopLink Workbench in Jdeveloper HELP!!!!!

    HI! I want to know how can I use TopLink Workbench in JDeveloper to configure java classes???
    Please Help!!!
    Best Regards

    JDeveloper has built in TopLink design time - so you don't need the external TopLink Workbench.
    Try following one of the TopLink Tutorials here:
    http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_adftoplink/master-detail-edit_page_adf_toplink.htm
    and
    http://www.oracle.com/technology/obe/ADF_tutorial_1013/10131/index.htm

  • Bug in TopLink Workbench

    Hi,
    I'm testing TopLink, my 1st step is running Workbench, but after I define the database and save project, the exception exception below always occur, with Workbench
    and I can't do anything,
    Plataform is:
    Linux kernel 2.4.18
    SUN J2SDK 1.4.1_01
    java.lang.NullPointerException
         at oracle.toplink.workbench.persistence.BldrDatabasePlatformPersistenceTools.loadPlatformNamesFromFileNames(Unknown Source)
         at oracle.toplink.workbench.persistence.BldrDatabasePlatformPersistenceTools.initialize(Unknown Source)
         at oracle.toplink.workbench.persistence.BldrDatabasePlatformPersistenceTools.<init>(Unknown Source)
         at oracle.toplink.workbench.persistence.BldrDatabasePlatformPersistenceTools.instance(Unknown Source)
         at oracle.toplink.workbench.model.db.BldrDatabase.getPlatform(Unknown Source)
         at oracle.toplink.workbench.ui.BldrProjectPropertiesSequencingPage.updateSequenceNativeChoice(Unknown Source)
         at oracle.toplink.workbench.ui.BldrProjectPropertiesSequencingPage.populatePage(Unknown Source)
         at oracle.toplink.workbench.ui.BldrProjectPropertiesPanel.populate(Unknown Source)
         at oracle.toplink.workbench.ui.tree.BldrProjectNode.populate(Unknown Source)
         at oracle.toplink.workbench.ui.BldrMainView.maintainPropertiesPanel(Unknown Source)
         at oracle.toplink.workbench.ui.BldrMainView.access$100(Unknown Source)
         at oracle.toplink.workbench.ui.BldrMainView$TreeSelectionHandler.valueChanged(Unknown Source)
         at javax.swing.JTree.fireValueChanged(JTree.java:2406)
         at javax.swing.JTree$TreeSelectionRedirector.valueChanged(JTree.java:2777)
         at javax.swing.tree.DefaultTreeSelectionModel.fireValueChanged(DefaultTreeSelectionModel.java:629)
         at javax.swing.tree.DefaultTreeSelectionModel.notifyPathChange(DefaultTreeSelectionModel.java:1076)
         at javax.swing.tree.DefaultTreeSelectionModel.setSelectionPaths(DefaultTreeSelectionModel.java:287)
         at javax.swing.tree.DefaultTreeSelectionModel.setSelectionPath(DefaultTreeSelectionModel.java:170)
         at javax.swing.JTree.setSelectionPath(JTree.java:1181)
         at javax.swing.plaf.basic.BasicTreeUI.selectPathForEvent(BasicTreeUI.java:2192)
         at javax.swing.plaf.basic.BasicTreeUI$MouseHandler.handleSelection(BasicTreeUI.java:2840)
         at javax.swing.plaf.basic.BasicTreeUI$MouseHandler.mousePressed(BasicTreeUI.java:2801)
         at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:218)
         at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:217)
         at java.awt.Component.processMouseEvent(Component.java:5090)
         at java.awt.Component.processEvent(Component.java:4890)
         at java.awt.Container.processEvent(Container.java:1566)
         at java.awt.Component.dispatchEventImpl(Component.java:3598)
         at java.awt.Container.dispatchEventImpl(Container.java:1623)
         at java.awt.Component.dispatchEvent(Component.java:3439)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3450)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3162)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3095)
         at java.awt.Container.dispatchEventImpl(Container.java:1609)
         at java.awt.Window.dispatchEventImpl(Window.java:1585)
         at java.awt.Component.dispatchEvent(Component.java:3439)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:450)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)

    I found the problem
    The steps to simulate are ,
    1) open a Konsole of KDE.
    2) type sh workbench.sh.
    3) create the project, save and close workbench.
    4) retype sh workbench.sh.
    now all clicks throw the exception,
    then if you don't reopen workbench, all works, or open it in another Konsole.

  • TopLink workbench won't run (can't find "~1\bin\javaw.exe" error)

    Hello,
    I'm having a tough time getting the TopLink WorkBench to run on Windows XP. I'm trying to run TopLink WorkBench 10g Release 3 (10.1.3.0.0) Build 060118. I've also installed Oracle Application Server 10g Release 3 (10.1.3.0.0) which is working fine (other than the Toplink part). I've managed to get EJB's deployed and access them through RMI and WS.
    When I run "workbench.cmd" I get the error
    Windows cannot find `~1\bin\javaw.exe"
    If I manually remove the setenv.cmd call and cutout all the fixpath bits, Toplink Workbench comes up fine (as far as I can tell), but I cannot connect to my Oracle databases. When I try to connect, I get "The class oracle.jdbc.OracleDriver was not found".
    I've been told this is because my J2EE 1.5 environment is incompatible with standalone Toplink Workbench. Is this true? I have both J2EE 1.5 SDK installed as well as J2EE 1.4 SDK but not amount of rearranging the system CLASSPATH seems to make everything work. (I've restarted Workbench to make sure the new env vars take effect when I change them)
    Is there a step by step document on getting this to work?
    Thanks in advance,
    James Ewell
    Seismic Micro technology
    Houston, TX
    PS - I am running WinXP 64-bit if that matters. The specific java bits are
    W:\>java -version
    java version "1.5.0_05"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_05-b05)
    Java HotSpot(TM) Client VM (build 1.5.0_05-b05, mixed mode)

    I was referred to this "step by step" link
    http://download-west.oracle.com/docs/cd/B25221_04/web.1013/b13593/mw002.htm#CJADJEEE
    which helps (it walks through the required edits in setenv.cmd). I still have the "can't find ~\bin\javaw.exe" problem though.
    Perhaps this is a JRE 1.5 issue or a WinXP (64-bit) issue.
    James Ewell

  • TopLink 9 and MySQL 4

    I want to use Toplink 9.0.3 with MySQL 4 but I have the same problem with Toplink 9.0.4 or Toplink 10.0.3 (preview)
    I have copied $TOPLINK/workbench/platforms/other.xml to $TOPLINK/workbench/platforms/MySQL.xml
    I have edited this file, and change the tag <name> to MySQL.
    I have added your MySQL's jdbc driver in the classpath of toplink mapping workbench (workbench.cmd).
    After starting the workbench, the MySQL's jdbc driver didn't appear in the listbox for Driver Class.
    Does Toplink work with Mysql ?

    It is possible to use TopLink with any compliant JDBC/SQL database.
    Although your diver does not appear in the drop down you can edit the driver class name to specify the driver you have included on the classpath.
    Doug

  • Primary key issue in toplink workbench

    Hi All,
    I am getting No primary keys specified in (xxx is the table name) table error in workbench.
    I my table,don't have any primary keys,i try to do direct to field mapping for all the fields with the table.
    After mapping,was getting this warning.
    Is there any mandatory thing in toplink workbench that we need to have atleast one primary key defined in a table.
    Please let me know!!!!!!!!!!!!
    Appreciate your hekp............

    Yes, it needs to know how to uniquely identify the row to do deletes and updates, etc. If you have no PK, then actually every field is needed to uniquely identify the row, and therefore just slect every field in the MW as being the PK... Note that the PK specified in the MW doesn't have to actually be the PK on the database, it just has to be unique for when TL does update/delete, etc.
    - Don

  • We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

    We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

    Already gone through following three notes but didn't found resolution.
    APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
    R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
    R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

  • What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    If the bank account permits, I suggest getting a 1 TB SSD anyway.  One cannot have too much storage. 
    Unless you are having issues with your current installation, a 'clean' install is not necessary.  It would be more efficient to clone your current drive to the new SSD, test it, and then do the swap.  The installation of Mavericks over Snow Leopard can be done either before or after the cloning process.
    Ciao.

  • PMW (Payment Medium Workbench) and needs to send Payment Advises to Vendor

    Hi SAP Gurus,
    We are using PMW (Payment Medium Workbench) and our client needs to send Payment Advises through mail. After running F110 system should trigger mail to vendor for payment advise.
    We have created one DME format and it's working fine.  DME file is getting generated when we assign DME format to our payment method.
    we have also made the change for payment advice sending through email. Copy FM SAMPLE_PROCESS_00002040 to ZSAMPLE_PROCESS_00002040
    Go to transaction FIBF
    Settingsprocess modules of an SAP application
    Add a new entry for 00002040 FI-FI ZSAMPLE_PROCESS_00002040
    Make use of FM  ZSAMPLE_PROCESS_00002040  for adding vendor email address and make the payment medium.
    Now the problem is, we can not do this in one go, if we need to create DME file than we have to assign DME format to our payment method and if we have to send payment advice to our vendor than we need to use Payment Medium Program RFFOGB_T (standard program).  It's radio button and we can not choose both the program and Payment Medium Workbench.
    I need your valuable advice what need to be done in order to get DME file and payment advice send to vendor in one go.
    many thanks for your reply.
    regards,
    SATVIR SINGH

    Hi Stavir,
    Do you recall how were you able to resolve this issue?
    Thanks
    M

  • Is it possible to create forms and workflow by Workbench and manage them by ContentSpace?

    Hi,
    In a previous issue, I have asked the interrelationship between Workspace and Contentspace. I learned a lot, and I'm very appreciate the kindly answer from Hodmi and Jasmin. And this time, I want to ask something about Workbench and Contentspace.
    As a part of presentation for a corporate client, I am trying to make a demonstration model. I 've created a PDF form and an Approval-and-Rejection workflow by Workbench. And I want to upload the form and the workflow to the Contentspace.
    In my imagination, I would make a button in the form, and then when I click the button, the form will be sent from the client side to the server side. As a result, it will appear on the space which I specified in Contentspace.
    About the workflow, I guess the Contentspace and Workbench may have some common place about Process Management and there is some transportation mechanism or something else between them. So by changing some configuration the workflow could be added into Contentspace.
    It is totally selfish imagination, but if it is possible, I think my corporate client will be more interesting about Adobe Livecycle.
    Beg your help.
    En Shoku

    Let's me just try to answer to question in several pieces.
    "And I want to upload the form and the workflow to the Contentspace."
    You can definitily save the form in content space. I'm not sure what you mean about the workflow.
    "In my imagination, I would make a button in the form, and then when I click the button, the form will be sent from the client side to the server side. As a result, it will appear on the space which I specified in Contentspace."
    This is also possible.
    "About the workflow, I guess the Contentspace and Workbench may have some common place about Process Management and there is some transportation mechanism or something else between them."
    You need to use the ContentSpace service. The Content Space service gives you a bunch operation like storeContent, retrieveContent, etc. You can use that service in Workbench, or call it directly using SOAP or REST.
    So to summarize, you can use the Content Space service to interact with content space to get and store your forms for you workflow.
    Jasmin

Maybe you are looking for

  • Router Linksys WRT54G not working. Please help!

    My router stopped working yesterday. I suddenly had no internet connection, and I initially thought it was due to my internet provider. So I contacted them and after some tests, I connected my cable modem to the ethernet adapter of my PC, restarted t

  • Computer not recognizing new ipod nano.

    My computer will not recognize my new ipod nano.  It is a replacement for one that was broken.

  • Differents values for Buffer Hit Ratio

    Hi Everyone! I have only a buffer_pool(8k) and when I execute this two querys(below). The "Buffer Hit Ratio" results are very different. Anyone know why does this happen?? I searched on the Internet and find out just V$SYSSTAT gather dates of all buf

  • Burning a MP3 CD

    Hi all When I'm burning a MP3 CD in iTunes can I get rid of the directory structure that appears on the CD (Artist & Album names)? My car will only play a MP3 CD where all the music files are in the 'root' directory on the CD. I can do it using Windo

  • Photoshop Elements 13 Organizer will not open.

    Trying to open the program after initial install, I get the error message ""DirectX/Direct Play could not be initialized."" Direct X is installed on my PC. How can I get Organizer to open?