Unauthorized battery Z710 error message

I've owned the computer about a month and have had some automatic updated run on it when starting it. Now I am getting the Unauthorized Battery pop up. It has been discussed in the Yoga forum, but doesn't look solved yet. Is this the result of a new Power Manager version?
I am very unhappy that this is happening having only had the computer for so short a time.

Iended up calling tech support and after going through the standard Tech Support switch flipping, I allowed the tech to get into my computer remotely and check some settings. After all of that she sent me a new battery and I sent the old one back. It seems to be working fine. I have had the battery out of the machine due to my mostly having it stationary and plugged in.
Maybe anyone who has the issue needed to call tech support and complain about it and maybe that will get them to get their stuff together.
Good Luck All.
D

Similar Messages

  • Battery Low Error Message

    I have Nokia N97 Mini handset and I am facing problem in it with Battery Low error message, when ever I call someone or I receive any call.
    Battery works fine in case of standby mode, or even when I do SMS chat for whole day. Even if I listen to music for 10 to 12 hrs, the mobile works fine, no issue of battery low. But during that if I receive any call, then suddenly it displays the battery low error message and the mobile is switched off.
    I try to check everything of it. The mobile functions normal and in good condition in following cases -
    1. Wife Connectivity
    2. Bluetooth data transfer
    3. Sms chat for lets say 12 to 14 hrs.
    4. Video play for 2 hrs.
    5. Music plays for 10 to 12 hrs.
    6. Clicking photos or recording Videos.
    7. Browsing internet.
    But it only falls down in case of Call. Either I receive call or make a call. I don't know how to Rectify this problem. I had once shown to Nokia customer care, but even after that the problem still remains.
    I even try factory restore settings and hard format of OS. But still no improvements.
    Can anyone help me in this regard? Any information will be useful information to me....
    Please help me out, I am facing a lot of troubles with this matter. Looking forward for your suggestions.

    Hi all. After searching alot over the internet, and asking friends , colleauges . I conclude that nokia n97mini battery drop is not caused by background running applications or even battery life problem. Its rather a bug in this handset, which suddenly drops out the battery to zero and phone switches off. Even still battery power exists and you can turn on and start messaging or playing music without recharging it from that state.
    Nokia should have take care of this problem as alot of other nokia n97mini users are facing same problem. I am one of those who are unable to find solution for this problem. And so I have no other choice other than to sell this set.
    Calling is the major functionality for which we buy a phone, and if handset is unable to let us receive call and talk before which it shuts down, so I think such hand set is a **bleep**.

  • Reinstalled new cmos battery,not error message,code 0176 and 1271

    can anyone help me,i installed a new cmos battery and now the IBM thinkpad T42 is coming up with two error messages,
    i've looked at what they are , 1 is for time and the other is a security message saying the system has been tampered with,
    it ask's for a password,but there wasn't a password installed, so how do i get over this problem?
    can someone please help.

    Changing the CMOS battery will trigger the Supervisor password if one was set, and it may have been set by a previous owner years ago...
    Having said that, password cracking techniques are NOT allowed to be discussed on this forum...
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • HP Mini 311 - HP Battery Alert - Primary (Internal) Battery (601) - Error Message at Startup

    I have a HP Mini 311-1037NR (Product Number is VBM262UA#ABA).   My OS is Windows 7 Home Premium.
    When I start up my HP Mini 311 I receive the following message:
    HP Battery Alert
    The system has detected the storage capacity of the battery stated below to be very low.  For optimal performance, this battery may need to be replaced.
    Primary (Internal) Battery (601)
    ENTER - Continue Startup
    Here's are my questions:
    First of all, what exactly is the problem here?  From what I have googled, it would appear the problem is NOT my external battery, but my internal battery.  What battery is needing replacement?  Does it have a name?
    Second, is there a user guide out there that would assist me with the replacement process that someone can provide a link to or at least send me the page that helps me?  Is there a YouTube video (even better)?
    Third, what exactly is the part number of the battery that needs replacement and exactly where do I purchase it (How much $$ does it cost)?  This question is important as I may be able to find out how to replace the battery, but without a way to purchase the replacement battery I'm still dead in the water.
    Fourth, my HP Mini 311 just dies when I unplug it.  Will a remedy for the above issue remedy this issue as well?  I really do enjoy using my little HP Mini, but would prefer to have the option to use it without a power cord. 
    Thanks in advance for any and all help.
    Tim
    This question was solved.
    View Solution.

    Hi Tim,
    No problem and it's certainly wise to verify an answer.
    I'd say you posted your question on the correct board.  It's usually best just to post once on the relevant board.  I do agree that the term 'internal' does cause unnecessary confusion.
    Here's a link to your Maintenance & Service Guide.
    Yes, I'm certain that the 601 error code refers to your notebooks main battery ( 602 is a failure code for machines that have a secondary storage cell ).  Interestingly, there is no error code generated for a failing rtc battery - or any in built diagnostic test for it, just the usual symptom of the system clock re-setting after each shutdown.
    There's also a HP document regarding start-up battery alerts on the following link.
    http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443470#N534
    Best regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Battery indicator error message on startup

    HP Pavilion p6512uk desktop PC running Windows 7 64-bit
    Every time I startup I get the following two messages:
    Battery Indicator - HPID09.  Access violation at address 00401C62 In module 'BATINDICATOR'.exe Read of address 000002DC
    and
    Battery Indicator - HPID09. Access violation at address 6D361A3B In module 'HID.DLL Read of address 01709DA8
    What does this mean and what is the remedy, please.
    This question was solved.
    View Solution.

    One way to get rid of the issue is to dowload the autoruns utility from Microsoft  TechNet's Sysinternals.com. Run the utility and select hide all microsoft instances. Find the  batindicator.exe file and disable it. 
    a video that touches on how to use autoruns. Autoruns is normally used by enthusiasts and experts. I don't know where you are in the user spectrum.
    Post your results.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Primary internal battery 601capacity Error message.

    My windows7 laptop Pavillon dm4 starts with the Primary internal battery 601capacity is low and may need replacement.  How urgent is the battery replacement?  The diagnostics shows 1 bad cell.
    This question was solved.
    View Solution.

    Hi,
    You need a full product number (dv4 is a series of many products) to enter the following search for the RIGHT part #:
        http://partsurfer.hp.com/
    You can order from there or use part # to order elsewhere. The following link shows you how to find the product number on your machine:
       http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Error message Internal Battery 601. How do I get a replacemen​t? HP G71 Notebook

    I have 2 HP G71 Notebooks - with WIN 7; 4:0 GB; 64 Bit and both dispaly the Internal Battery 601 error message.  How/where do I get replacement batteries?

    Replacement battery is a HP EV06
    you can buy it from HP or Amazon, beware of really inexpensive non HP batteries, they do not last.
    http://shopping2.hp.com/en_US/home-office/-/produc​ts/AC-Adapters-and-Batteries/Laptop-Batteries/KS52​...
    http://www.amazon.com/HP-462889-761-462889-542-462​890-542-462890-761/dp/B006LPMGT6/ref=pd_cp_pc_1

  • Computer clock error message

    I have been having some problems with my computer that are most likely related to my battery being dead. I wanted to make sure, however, that certain things I've noticed are not indicative of some other problem. After my computer shuts down because of the problems I'm having with my battery, an error message pops up after turning it back on. The message says something to the affect that the computer's clock is set to a date before March 24th, 2001. At one point I thought I had read that an error message like this could be caused by a problem with the logic board. I was just wondering if anyone knows what problem this error message is generally associated with. I am hoping it is just the fact that my battery is practically dead, and I need to get a new one. If anyone has any information about the error message, please let me know!
    Thanks!

    I had a battery that was recalled and had to run on the power cord for weeks. Every time I turned the computer back on after it had been off, I got the same error message and had to reset the time and date. The battery is necessary for keeping the date and time right. Once I got my replacement battery, the date and time stayed set.
    Based on my own experience, I doubt you have any worse problem than a dead battery. I think it's behaving just like it's supposed to.
    Good luck!

  • Palm Pre crazy symptoms: "phone offline", will not charge battery, will not start, error message "an error has occured that cannot be resolved"

    This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
    I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
    - First Series of Issues: "Phone Offline", will not charge battery -
    In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
    1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
    2) Reset the phone (several different ways - call tech support so that you do this correctly)
    The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
    - Second Series of Issues: Error message "an error has occured that cannot be resolved" -
    Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
    Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
    Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
    - Third Series of Issues: phone stuck on USB symbol -
    So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
    In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
    palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
     After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
    I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
    Thanks.
    Post relates to: Pre p100eww (Sprint)
    This question was solved.
    View Solution.

    Hello and welcome to the forums;
    Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
    There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
    Hope this helps,
    TreoAide

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • Service Battery error message for a battery that looks ok

    Hello,
    I have a 13 inch Macbook Pro with model number 5,5 and after upgrading my hard drive to a WD scorpio black 750GB and also adding 8 GB of Kingston memory I get a Service Battery error message. My OS is 10.6.8. The strange is that my battery is in a fairly good condition. I did check with coconut battery and it looks ok. I also add a print screen.
    Does anyone knows how can I remove this error message ? 
    Do I have to replace my battery ?

    Service battery means replace battery as soon as possible.
    Reset SMC and see whether it changes the notification.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Error message: "USB device drawing too much power"; Battery will no longer hold a charge. Help?

    A few months back a jump drive broke while inserted in my Macbook (the computer fell sideways and cracked the jump drive). That particular USB port no longer works and I keep receiving an error message that tells me a USB device is drawing too much power, even though nothing is plugged into either port.
    It wasn't a huge issue until my battery stopped holding a charge. The computer is usable while plugged in, but as soon as the cord is disconnected it will immediately shut down. I assume this has something to do with the faulty USB port.
    In addition, my CD drive will no longer burn CDs. It will read CDs and allow me to open content from them, but it will no longer burn content to a new disc.
    As soon as I am able I am taking the computer to the store to get checked out, but in the meantime I wanted to see if someone has experienced a similar problem and knows what needs to be replaced or repaired, and how much that might be.

    I guess I should say, abnormally warm. Does it feel like there's a small heater going in there?
    I don't think this is the kind of thing you want to undertake, not if you're asking about how to do it.   I don't know much about the insides of Macbooks other than the parts needing replacing are probably soldered to the rest of the computer.  It's really something you need an expert to investigate. 

  • I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What ?

    I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What does it means please provide me solution ASAP

    Israr,
    Then error indicates that the primary battery (the one you can remove and replace) has a hardware failure.  You should run Battery Check in HP Support Assistant.
    Wes
    I am an HP employee.

  • HT201210 Just replaced the battery in my iPhone 4S.  Before doing so I backed-up then wiped the phone.  Now when I go to restore it, it gets about 3/4 done and that is when I get an error message, "Code 1." does this mean I fried it??  :-(

    Hello,
      Just replaced the battery in my iPhone 4S.  Before doing so I backed-up then wiped the phone.  Now when I go to restore it, it gets about 3/4 done and that is when I get an error message, "Code 1." does this mean I fried it??

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • Error message 150:30 on iMac on 10.10.1Tried all remedies Licence 'recovery will not open due to unauthorized developer

    Error message 150:30 on iMac on 10.10.1Tried all remedies Licence 'recovery will not open due to unauthorized developer

    hi
    have you tried all these troubleshooting steps
    Error "Licensing has stopped working" | Mac OS

Maybe you are looking for

  • 10.5.7: Automatic Software Update Feature No Longer Works

    Ever since I installed 10.5.7 the automatic Software Update feature no longer works. (Manual updates work fine.) For example, here's what happened today with Safari 4.0.2: 1. After powering up I got the Software Update icon on the Dock. 2. I clicked

  • Need help setting up static NAT to internal server

    One of my internal servers requires it to be available to the internet I am having a hard time allowing it to be NATed through my Ciscc 2801 router. It seems as though im missing something small. From what I can gather it seems as though its as issue

  • How to restore my bookmarks when the firefox crashes and reinstalls itself again ?

    My mozilla has crashed 2 times and and then a wizard comes where it reconfigures it. My bookmars get lost. I couldnt store the crash ID . But I am very disappointed. Suggest me some good practices for future to keep my bookmarks..

  • Cannot fill in a fillable form, AR 9.3.3, Mac OS 10.6.2

    Using a Mac with 10.6.2, just updated to Reader 9.3.3. I have downloaded a PDF that is supposed to have filable form fields. The forms properties say the Filling of Form fields is allowed. I can get my cursor to blink in each field but cannot get tex

  • WLC and Point-to-Point Bridge/Repeater

    Hi all, I have a WLC2125 and 11 LAPs installed in our warehouse. There is going to be one additional AP but the problem is we can´t provide cabling in that area. The idea is to have this additional AP connected to one of the existing LAPs and repeat