Unavailable or Initialization problem when viewing the servlets from admin console

Hi
I am on Weblogic 5.1.0. I connect to myServer which comes configured by
default. When i see the
registered servlets inside HTTP, on the console i see Unavailable or
Initialization problem on every
servlet that i select. Also when i try to load the servlet, it gives me the
following error :--
Property Change error for property "Load". Unable to load servlet.
This is happening for all the servlets which are inside the General
application inside HTTP tab.
But when i executing the servlet examples that comes along with Weblogic,
those examples are
working fine.
Also, i started my console and started the "myServer" instance and attached
it to the console. But due to
some reason my console hung. So i closed down the console window by pressing
the browser close button.
The weblogic server instance of "myServer" was still running. Then i started
the console again and attached the
running weblogic server instance of "myServer" to the console and went to
servlets. This time all the servlets
show "Previous Class Load Problem".
Why all this is happening. Has this any where documented how to use the
Weblogic console and Weblogic server
instances. I have gone thru the Installation documentation of Weblogic but
nothing like this has been mentioned over
there.
Thanks for ur help
Niranjan

Hi,
Try to find which object causing high cpu usage following Oracle Doc ID 779349.1.
by looking into the files then we can find what would be exact cause of this issue.
Regards,
Kalyan

Similar Messages

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

Error occurred when view the data from physical layer

Hi ,
I have created system DSN like "demo1" for excel file. After that i import the excel file into administration tool.
after that i want to view the data from physical layer. At that time ,I am getting following error .
Please resolve this issue.
Thanks in advance,

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Create problem when compiling the servlet

hi,
i got a problem when i compile a servlet
when i try to compile the servlet, it shows that it could
not found the classes like httpservlet, etc.
means the classes of the servlet
i am using the j2sdk1.4.1 edition,
i had include the javax.servlet.*; in the program
please tell me what can be the problem & especially any solution for that

the javax.servlet package and it's sub packages (javax.servlet.http, javax.servlet.jsp, javax.servlet.jsp.tagext) are not included with the Standard Edition. These packages are part of the Enterprise Edition. Check out this link for download:
http://java.sun.com/j2ee/sdk_1.3/

DS XI3.2 SP1 - Problem when starting RFC server from management console

Hi,
We're using DataServices XI 3.2 SP1 FP1 on a windows 2008 server 64bits to load SAP BW. We have set up an external system in SAP BW called "DI_SOURCE" and then successfully created a RFC server interface (DI_SOURCE) within the management console.
When we try to start this RFC server from the management console, we immediately get the following error message : "An internal error occurred in: server.start()::rfc_bad_connection".
On the other hand, when we follow the "old method" (pre SP2) and start the RFC server from a command window, it works : we have "CONNECTION DI_SOURCE OK" in SAP BW.
Any ideas how to solve this ?
Thanks,
Olivier

Hi,
We have tried your suggestions above.
Instead of just crashing we now get an error from designer (before closing down). Seems as if our librfc32.dll has a problem.
We have verified that the librfc32.dll from the Data Services package is the only one on the server.
Problem signature:
Problem Event Name:        BEX
Application Name:        al_designer.exe
Application Version:        12.2.2.0
Application Timestamp:        4b99c5ef
Fault Module Name:        LIBRFC32.DLL
Fault Module Version:        7100.3.144.6097
Fault Module Timestamp:        49bec8be
Exception Offset:        000179a4
Exception Code:        c0000409
Exception Data:        00000000
OS Version:        6.1.7600.2.0.0.272.7
Locale ID:        1030
Additional Information 1:        4b85
Additional Information 2:        4b85a4b06dde50b4e092d24f447efca0
Additional Information 3:        45fe
Additional Information 4:        45feda9db76a48384005c14dafbddc29
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

What web service & xml will be used for deleting the packged epub/pdf file from Admin Console

What web service & xml will be used for deleting the packged epub/pdf file from Admin Console?
I am able to delete the files from Admin console directy but not able to get which web service is calling on deleting the file from admin console:
Mangal

Hi Jim,
I tired following web service and xml to delete the packaged ebook but it is giving me error instead of response:
Web Service & XML
http://myserver_url/admin/ManageResourceKey
<request action="delete" auth="builtin" xmlns="http://ns.adobe.com/adept">
<nonce>" . $nonce . "</nonce>
<expiration>'. $expiration .'</expiration>
<resourceKey>
<resource>resource_id</resource>
<resourceItem>1</resourceItem>
</resourceKey>
</request>
Error Message
<error xmlns="http://ns.adobe.com/adept"
data="E_ADEPT_DATABASE http://myserver_url/admin/ManageResourceKey
Cannot%20delete%20or%20update%20a%20parent%20row:%20a%20foreign%20key%20constraint%20fails %20(`adept`.`distributionrights`,%20CONSTRAINT%20`distributionrights_ibfk_2`%20FOREIGN%20K EY%20(`resourceid`)%20REFERENCES%20`resourcekey`%20(`resourceid`))"/>
Magal Varshney

GenericServiceFactory initialization problem when trying to load Web servic

Hi,
I am making a Guided procedure that calls a webservice. I have created a new Destination Template and was able to load the webservice definition successfully, but when I test the callable object I created for that same webservice y get the error:
GenericServiceFactory initialization problem when trying to load Web service model for WSDL.
Somehow I think there is something wrong with the user authentication. The Destination template has a user and password but somehow I think the callable object test is not using this information at all.
Can anyone help ?
Thanks in advance

Hi Hans,
Have you verified if you can call any external web service calls from your J2EE engine? Go into the SOA Management / Global settings (if you are on CE - if you're on 7.0 it's in manage WS desintations).
Look at your proxy settings and set them like your web browser that enables external calls. For example, in the SAP network I set my global proxy settings on my local J2EE engine to be:
Proxy host: proxy
Proxy port: 8080
Exclude list: *.sap.corp
Does that make sense - have you verified if your settings are correct for your company?
Regards
Ginger

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting, but the password from the old computer in when waking the computer from sleep.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?

The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

Problem in retriving the realpath from the servlet

Hai All,
I am facing problem in retriving the realpath from the servlet.
I am using the following code in order to retrieve the path.
String prefix = getServletContext().getRealPath("/WEB-INF/classes");
The value returned from above code is null.
I am using Weblogic 8.1 server, and deploying my servlet as WAR file inside
the weblogic server.
Is this the problem with the weblogic server or with the code. Is there any way to over come this.
I need the path as i am implementing Log4j for the servlet and i have to pass the
configuration file in one of the function "PropertyConfigurator.configure(file);"
where the file should include complete path.
My configuration file is in WEB-INF/Classes directory.
Any help is appreciated.
Thanks in advance
Pooja.

String realPath = request.getRealPath(request.getContextPath());
That should return the path up to where you have your servlet context.

I have a problem when installing the Developer Suite

Hello,
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
Please help me with this :(

Hi user;
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
Regard
Helios

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD

TS1702 I books store when viewing the 3.99 books crashes frequently. what's up?

When viewing the 3.99 books in ibooks the app crashes frequently. What's up? Doesn't like cheap books.

What version of the iBooks app is on your iPad? To check , tap Settings > General > Usage > iBooks.
If you don't have version 2.1.1, try updating iBooks.
If updating doesn't take care of it, take a look at this Apple article -> iOS: Troubleshooting applications purchased from the App Store

When viewing the color blue on my iPad it appears greenhe correct color appears on my computer screen. Can this be resolved?

When viewing the color blue on my iPad it appears greenhe correct color appears on my computer screen. Can this be resolved?

Try this:
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
(no media or data will be deleted from the device, this will only take a minute).
If that doesn't work then backup and then restore the device as new.
And if none of that works, take it to an apple store or call apple support

When viewing the weather default app with multiple cities, how come there isn't a one click shortcut to go back to the first city?

When viewing the weather default app with multiple cities, how come there isn't a one click shortcut to go back to the first city?

3.2 you can make multiple clocks, each clock can have a different alarm.

Unavailable or Initialization problem when viewing the servlets from admin console

Similar Messages

Maybe you are looking for