UNCAUGHT_EXCEPTION dump with manage cube

hi :
i had already load data to the cube, when use right click to choose mange with the cube, system dump information as follows:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_RSR_X_MESSAGE
Date and Time          2008.03.31 15:08:58
Short text
    An exception occurred that was not caught.
what happend:
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program 'SAPLRRMS' has to be terminated.
can anyone give some avaluable suggestion?

Hi Tracey,
Yes i have checked that and ran the report BBP_CND_CUSTOMIZING_CHECK. The IPC is up and running.
Here is the Report
System : ES1 Client : 400 Release : 640 |
Date : 04/04/2006 Time : 11:03:07 User : MBALYAN
Host : pdcsap32 Op.Sys. : SunOS Database : ORACLE
Inst.no : 0020146999
IPC
SRM Release: 500 SRM Patch Level: 0008
IPC Version:
IPC Pricing is Active
IPC Up and Running
Update IPC Buffer
Technical Basic Settings
Time Zone Parameter Defined
Context BBPCONTRACT Defined Correctly
Calculation Schema 0100 Exists
Plausibility of the Customizing Settings
10 Condition Types Defined
10 of Condition Types are Defined in Calc. Schema 0100
7 Condition Types/Tables Defined in Conds Group 0100
4 Cond.Types/Tables Defined in Conditions Group 01CO
1 Condition Types/Tables Defined in Condition Group 01HD
In 01HD: Condition Type 01RH Scales Defined
1 Condition Types/Tables Defined in Condition Group 01CH
In 01CH: Condition Type 01RH Scales Defined
7 Condition Types/Tables Defined in Condition Group 01CC
4 Condition Types/Tables Defined in Condition Group 01CP
7 Condition Types/Tables Defined in Conds Group 01QU
1 Condition Types/Tables Defined in Condition Group 01HQ

Similar Messages

Funds management cube getting data from 4 ods, data not seen in cube

Hello all,
I am working on funds management cubes (0PU_C02 and 0PU_C03). These two cubes get data from like 7 or 8 ODS. Can someone tell me which are the ODS which feed to respective cubes. I have the mappings done but i am getting very confused.
In the ods 0PU_O44 there is RLDNR for Ledger and I can see that data in ODS but when i run load to cube I dont see the ledger data (its direct mapping there are no routines or rules).
Is there any sequence with wihic we have to load the data?
Thanks
Message was edited by: Raj M

Hi Raj,
I was going thru the forums who has knowledge in Public sector when i came accross ur forum.Can i get your email id..i have some questions to ask regarding student administration.
thanks.

Stock Valuation - Inventory Management Cube

Dear Sap Gurus,
We have implemented the Inventory Management Cube in BW.
Quantities are correct, but we have difference on the stock valuation.
For some material stock value are correct, for some other they are not correct.
A saw a lot of OSS notes and how to on this subject, I am trying to solve this issue using these documents, but based on your experience could you explain me how you solved this issue ????
Thanks,

Hi
Did you follow the correct steps?
Initialisation of BX data in the first step.(Loading of Opening Stock)
Then The request in which the opening stock was loaded must always be
compressed with a marker update
Init load of BF And UM in the second step
The request in which the historical material documents were contained
must always be compressed without a marker update and
Successive delta uploads must always be compressed with marker
updates
Check this whether you have done this or not.
Because of missing the steps here also would give you wrong values,
Regards
Ram

ASSIGN_TYPE_CONFLICT dump with 2LIS_13_VDITM

Hi Expert
When i execute 2LIS_13_VDITM DTP for the cube 0SD_C03 I gt a dump with this message: ASSIGN_TYPE_CONFLICT
I use the SAP transformation and SAP DTP. All the routine are SAP routine. No generic abap exist
Can any one help me please?
Thanks

Hi
It's OK, juste reactivate the tranformation... Incroyable
Thanks

Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working

Hello all.
I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures. I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
Steps I followed:
1. Ran initialization of beginning balance with 2LIS_03_BX
2. Ran the historical job with 2LIS_03_BF
3. Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
4. Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
Now, to this point, everything was fine. Quantities were as expected. Dollar values were as expected. The problem occurs once I load deltas:
5. Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
Query example:
MATERIALA:
Initial Stock Balance = 1000 EA
Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
Now, I have the record in BW showing the stock issue of 150. However, the non-cumulative key figure within the query still shows 1000. And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance. It is like it is not recognizing the updates.
Any help would be appreciated.
Thanks,
Brent

Hi!
Here is what helped in my case, very similar to your:
In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values"

Outline sync with 4 cubes or partition help req

Hi,
I have three huge cube's, two cubes abt 90 gb (BSO) for TY & LY data, weekly refresh with hierarchy and data on third cube (ASO). all there cubes are transparent partitioned to fourth cube.
I have the same hirarchy in these three cubes and couple of other cubes. so is there a way to update the hierarchy on one single cube and sync with other cubes.
please suggest me any solution .......
I was thinking for replication partition and only sync outline is it possible?
Edited by: user10722265 on Oct 21, 2009 9:27 PM

Thanks Srinivas,
yep you are correct, in regards to my questions.
I mean you are saying to copy outline from one BSO cube to other cubes manually.or Is there any maxl command to copy outline form one cube to other.
considering the size of the cubes, i'm planning to split the cube in to multiple, each line of buinsess (front end cube) will have there own cube instead of all users loging to one cube.
so what i want is to maintain all hierarchy's on one cube. Then partition the dimensions pertaining to that cube only.
what i mean is only portion of dimension will go to one cube and other portion to another cube.
store (7)
->regions (12)
-->subregions (190)
I want 7 regions to one cube and another 5 regions to other cube.
update hierarchy on one cube and sync to other cubes theough replication partition or other ways........i want only heirarchy sync ...........no data sync from source to target cube.
thanks for reply srinivas
Thanks
srikar

Short Dump with ALV Report

Hi
I have one Zreport which gives the result in ALV form.
After getting the result(1 row with 33 columns) when I tried to export the ALV results to spread sheet using the option : List-> Export-> Spread Sheet OR by click on Excel icon in the display screen,I'm getting the short dump with the description "No more storage space available for extending an internal table" .
After analysis ,find that dump is raising in the FM : F4_GET_RESULT of Include Program : LSDH3U03.
Can anyone provide us some clue .
Thanks & Regards,
Sreeram

Hi,
If the display is in ALV grid format, then you can try another approach to save the data in a spreadsheet.
- Right-click on any output cell.
- Select 'Spreadsheet' from the drop down list
- radio-button 'All available formats'
- Excel (In existing XXL format)
Thanks!
VS.

Getting dump with message CALL_FUNCTION_GET_NAME_FAILED

Hi,
My requirement is to write a report which will be run in background every Monday and the result will be sent to a user as email with excel as attachment.
I tried it by giving the email in 'Spool list recipient' in SM36. ut since the length of the output is more than 255 chars, so i thought of writing the email code as shown below.
DATA: l_message_content LIKE soli OCCURS 10 WITH HEADER LINE,
        l_receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
        l_packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
        l_listobject LIKE abaplist OCCURS 10,
        l_compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
        lw_object_hd_change LIKE sood1,
        l_compressed_size LIKE sy-index.
l_receiver_list-recnam = sy-uname .
l_receiver_list-esc_des = 'B'.
APPEND l_receiver_list.
lw_object_hd_change-objla = sy-langu.
lw_object_hd_change-objnam = 'Selection'.
lw_object_hd_change-objsns = 'P'.
Mail subject
lw_object_hd_change-objdes = 'KRB SAP Inconsistency Report'.
Mail body
APPEND 'Consisteny report between KRB and SAP' TO l_message_content.
CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
      compressed_size = l_compressed_size
    TABLES
      in              = <fs_table>
      out             = l_compressed_attachment.
DESCRIBE TABLE l_compressed_attachment.
CLEAR l_packing_list.
l_packing_list-transf_bin = 'X'.
l_packing_list-head_start = 0.
l_packing_list-head_num = 0.
l_packing_list-body_start = 1.
l_packing_list-body_num = sy-tfill.
l_packing_list-objtp = 'ALI'.
l_packing_list-objnam = 'Selection'.
l_packing_list-objdes = 'SAP KRB Consistency Report'.
l_packing_list-objlen = l_compressed_size.
APPEND l_packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
      object_hd_change = lw_object_hd_change
      object_type      = 'RAW'
      owner            = sy-uname
    TABLES
      objcont          = l_message_content
      receivers        = l_receiver_list
      packing_list     = l_packing_list
      att_cont         = l_compressed_attachment.
I am getting the mail which i checked in SBWP but when i clicked on the attachment i am getting dump with message CALL_FUNCTION_GET_NAME_FAILED.
Short text
    Error when starting a Remote Function Call.
What happened?
    "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
     error) "
    An error occurred when executing a Remote Function Call.
Error analysis
    An error occurred when executing a Remote Function Call.
    "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
     error) "
    Status of connection.... "RFC DRV=??? ???"
    Internal error code.... "RFC_IO4"
    Internal error: Invalid RFC handle.
Trigger Location of Runtime Error
    Program                                 SAPMSSY1
    Include                                 SAPMSSY1
    Row                                     266
    Module type                             (FORM)
    Module Name                             XAB_RUN_DRIVER
Please help in this.
<removed by moderator>
Edited by: Thomas Zloch on Sep 14, 2011 11:57 AM

Hi,
Check your RFC Connection Configuration. Also, check the used username & password.
Reward points if the asnwer is helpful.
Regards,

Short dump while displaying cube data in production

Hi Folks,
I'm getting a short dump while displaying cube data in production, please suggest
Thanks and Regards
Santhosh

Hi Santosh,
I'd suggest to follow as per SAP Note: 568768 - Analysis of SQL Errors causing Shortdumps or Error messages. The Note contains precise steps to analyze such an ABAP dump.
cheers
m./

Short dump with an error SAPSQL_LIKE_QUOTES

Hi,
today we have more short dumps with an error SAPSQL_LIKE_QUOTES. this means The logical condition contains a text field literal, for which there is no closing quotation mark.
as per my analysis i found the below code from the std. sap program SAPLBTCH in that include LBTCHF19.
TRANSLATE p_buffer1 USING '*%'.
IF p_buffer1 CO '% '.
    IF NOT i_mandatory IS INITIAL.
      CONCATENATE i_name '<> ''''' INTO o_where
        SEPARATED BY space.
    ENDIF.
    EXIT.
ENDIF.
can you please tell me that there is a sapce in the line IF p_buffer1 CO '% '.
please advice me if this statement is true or should not contain any spaces between the quotations.
Thanks,
Kasi

Hi Kasi,
please check this link
[SAPSQL_LIKE_QUOTES|http://www.google.com/#hl=en&num=100&q=SAPSQL_LIKE_QUOTES&fp=1&cad=b]
Kind regards,
Clemens

ABAP short dump with "CNTL_ERROR"

Hi,
I am getting an ABAP short dump with "CNTL_ERROR" while using an input script. What do I do?
Thanks,
Sreekar.

Hi,
Newer versions of SAP GUI and R/3 include external controls called as ActiveX (OCXs). ABAP code internally issues some commands to flush and refresh these controls. Since, when using GuiXT and input scripting, these controls are not created, and ABAP dumps. Use keyword "Enable controls" (without quotes on a separate line) in a screen block that has an ActiveX control.
Example:
Screen SAPLCOIH.3000
Enter "/Menu=4,1,5"
Screen SAPLSP01.0100
Enter "=No"
Screen RIPLKO10.1000
Enable controls
Set F[Group] "UG"
Enter "/8"
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

Transport with return code 12 ,short dump with 'DBIF_RSQL_SQL_ERROR'

Dear All,
My trasnport contains infoprovider. DTP,transpformations, character realtionships , aggregation levels ,web templates, programs.
I got a transport failed with Return code 12, and it is showing message :
Program terminated (job: RDDEXECL, no.: 06031600)
See job log
Execution of programs after import (XPRA)
End date and time : 20101026060421
Ended with return code: ===> 12 <===
I have short dump with 'DBIF_RSQL_SQL_ERROR' exception 'CX_SY_OPEN_SQL_DB'.
in how to correct the error :
below is the detials.
Database error text........: "ORA-01578: ORACLE data block corrupted (file #
211, block # 79950)#ORA-01110: data file 211:
'/oracle/RBW/sapdata15/xbw_188/xbw.data188'#ORA-26040: Data block was loaded
using the NOLOGGING option"
did someone has the same problem .
Help is really appreciated.
Regards
Veera

I am afraid you will need to esclate this to BASIS team.. seems some issue with database

Short dump with TPM_TRD1 000

hi everyone,
when I run the Tcode:TBB1，i come across a ABAP short dump error.
my system environment is:
PC
windows2003NT
oracle10.2
independant system without SLD control
The error info as follow:
Note 837202 - TPM_MIGRATION:tpm18: Short dump with TPM_TRD1 000
Summary
Symptom
You migrate from Release CFM or Enterprise 1.10 to ERP 2.0 or higher. There are already parallel valuation areas in use. In tpm_migration_cat, you specify a key date. In the test system, the following short dump occurs for the parallel valuation areas:
Error message short text:
Internal error: SLD
Message class: "TPM_TRD1"
Number: 000
Variable 1: "SLD"
Other terms
CL_DISTRIBUTOR_SLD, TPM_TRD1000
Solution
In the production system, you have to carry out tpm18 before the technical upgrade for all business transactions that are before the key date from tpm_migration_cat.
I do not understand how to do with the soluton
eg.what is "tpm18"?
Do need your helps,
Thank you very much
Peter

Hi Peter,
I guess you found note 837202 when you were looking for a solution for the TBB1 dump you encountered.
This note deals with a special situation when executing tpm18 (which is the transaction for fixing and posting derived flows) in a test system after migration and it tells you you should run tpm18 in production before the technical upgrade.
I am not sure if this really applies to your situation, maybe you should rather check if note 821854 and the solution therein can be helpful.
But without more information (e.g. knowing more about your release, your 'migration history' and the part of the coding where the dump is raised), it is quite difficult to give a diagnosis.
Maybe you should think of sending a customer message to SAP support via the SAP marketplace if you cannot get rid of this problem on your own.

Short dump with error FORM "CLEAR_SPECIAL_TABLES" does not exist"

Hi All,
We are experiencing an issue in our development system. We have recently upgraded to ECC6 from ECC5. While executing FBL3N transaction, we are getting a dump with description Syntax error in program "RFEPOS00 ".
The following syntax error occurred in program "RFEPOS00 " in include "RFPOSFZ0 "
line 1072:
"FORM "CLEAR_SPECIAL_TABLES" does not exist"
I checked in our previous systems, the subroutine CLEAR_SPECIAL_TABLES exists with an empty body in include RFPOSFC1.
And it is created by DDIC.
As per the comments in the include RFPOSFC1, we tried to generate the program RFXPRA33. But it is giving same error FORM "CLEAR_SPECIAL_TABLES" does not exist" .
Any help to resolving this issue will be appreciatable.
Thanks in advance.
Edited by: Kumar.ktk on Jun 8, 2010 1:36 PM

Hi,
We just had this issue after an upgrade and the solution was to compare the coding with an unupgraded system,
there we found that this missing form exists in an include with this documentation:
Function LINE_ITEMS_SPECIAL_FIELDS
caller L0F14I01, AFTER_SAVE_T021S, tcode O7R3
In case of errors: Start RFXPRA33
FORM CLEAR_SPECIAL_TABLES.
ENDFORM.
After we executed program: RFXPRA33 all errors were resolved,
Hope this helps,
Mickey

Short dump with error RSW_CURRENCY_TRANSLATION while loading SRM data

Hi All,
I am loading data from SRM to BW. From data source 0BBP_TD_CONTR_2 to DSO 0SRCT_DS1. Data is loaded from source to PSA. When loading from PSA to DSO using DTP, I am getting a short dump with below error. Can one please let me know solution if you have faced the same problem previously?
Termination occurred in the ABAP program "SAPLRSW0" - in
"RSW_CURRENCY_TRANSLATION".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 86
of the (Include) program "LRSW0U09".
The program "SAPLRSW0" was started as a background job.
I have checked the DSO routines and objects, everything is ok. Replicated all currency conversion tables from source.
0PSTNG_DAT infoobject is also active. There is no errors in Development while loading, when moved to quality, the error is throwing.
Regards,
Don

Hi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don

UNCAUGHT_EXCEPTION dump with manage cube

Similar Messages

Maybe you are looking for