Under SHARE, IDVD is grey, what step am I missing? Only MEDIA BROWSER and ITUNES is active?

I'm unable to SHARE my IMOVE since IDVD is grey and not active, only MEDIA BROWSER and ITUNES. I'm using ITUNES '11.

Hi
A. I don't know
B. I think that THERE ARE A MUCH better choice to do - ! ! !
As Share to Media Browser is OK
(I NEVER use Share to iDVD from within any iMovie versions as the result will be bad to even worse)
Use this and Share as LARGE (Not HD - also degrading result)
Now Close iMovie and Open iDVD and Import movie from Media Browser - This will result in as Good result possibly when movie comes from iMovie'08 or 09 or 11.
If You want even better result then use
• iMovie up to HD6 - or -
• FinalCut any version
So that the material exported over to iDVD is fully interlaced - as DVDs are so and as SD-Video quality is so as Standard. (There are no HD-DVD quality (but academic - very rare and needs special players))
Yours Bengt W

Similar Messages

  • IMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.

    iMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.

    Share your movie to the Media Browser. Then, in iDVD, drag your movie in from the Media Browser at the bottom right.
    THe Share to iDVD option is only activated if your source material is DV or AVCHD.

  • TS1702 my ipad2 was restored twice as it will not connect to my network, so what steps must I take to get iCloud and my ipad2 to work together and how do I connect so I am on internet????

    my ipad2 was restored twice as it will not connect to my network, so what steps must I take to get iCloud and my ipad2 to work together and how do I connect so I am on internet????   I connect tp my mac mini. It is on my own network. Mail and Safari open on it just can not get my ipad back online!!!     HELP!  LOST HERE!!!!

    Uwdawgfan-
    Your new router may not correctly handle Bonjour data required by AirPrint.  Contact Frontier to correct the router's setup.  A firmware update may be required.
    Fred

  • I am trying to change the font on my emails and I keep following the instructions exactly by going into preferences, fonts and colours and then choosing - then when I go out of that and back to the message it reverts to Helvetica - what step am I missing?

    I am trying to change the font on my emails; I follow the instructions exactly going to Preferences, Fonts & Colours, then I set the preference - I then go back to my message and it reverts to Helvetica. What step am I missing?

    There is a display bug, but it still works okay -
    I prefer Arial to the default Helvetica, so that's what I set -
    When I first open a new message window, it displays Helvetica as the font -
    However, as soon as I type the first character, it switches to showing Arial as the font -
    ...and actually enters in Arial.

  • Hi, im trying to burn my imovie project to a dvd. i went to share it to idvd and there was no option to do so. instead i shared it to quicktime and the project didnt show up when i tried to open it in idvd. i also tried sharing it to media browser and it

    Hi, I'm trying to burn my Imovie project to a dvd. I went to share it to iDvd and there was no option to do so. Instead I shared it to quicktime and the project didnt show up when i tried to open it in iDvd. I also tried sharing it to media browser and it didnt show up either. Please help me!

    While we all have MacBooks in this forum not all of us use iMovie. There's a iMovie Support Community where everybody uses iMovie. You should also post this question there to increase your chances of getting an answer.   https://discussions.apple.com/community/ilife/imovie

  • IMove 09 just keeps crashing when I try to share it in Media Browser or iTunes etc

    Can anyone help ?
    iMove 09 just keeps crashing when I try to share it in Media Browser or iTunes or iDVD.
    I have plenty of space on my HD
      Model Name:          iMac
      Model Identifier:          iMac10,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
    Thank you
    Les

    Locate and move the com.apple.iMovie.plist and com.apple.iMovieApp.plist.lockfile files to the Desktop, launch iMovie and try again. If that corrects the problem you can delete them from the Desktop.
    They will be in your Home/User/Library/Preference folder.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    OT

  • HT1386 Switching from a pc to a Mac. What steps are needed to get my iPhone and iPad to work with my new Mac?

    What steps are needed when upgrading from a pc to a Mac?

    Copy everything from your old computer to your new one.

  • Share: what is the difference between media browser and apple div.?

    fcpX: in share this options: mediabrowser and apple divices.
    They look exactly the same.
    I can 't find the diff. in the help to know when which to use.
    Any tips?
    Thanks,
    bruce

    Apple devices will either go to iTunes or a designated location. Media browser will go into the project folder and accessible by other applications such as iDVD and GarageBand.

  • Format C drive, what steps to take for retaining all data of iTunes?

    Hello
    I want to format my C drive of Laptop and shift my itunes to E drive. I'm on windows 7. C drive is having itunes and in that I have synced my 2 iphones and 1 ipad.
    Now I want to format the C drive and want to retain all the data, backup, media etc of my synced data with the itunes.
    What I've done is that I transferred my music location from C to E drive by using apple forum discussion. I changed destination to E drive in ADVANCED TAB in Edit-Preferences. Then orgainzed data. That was successful.
    Now please help me on what to do next so that i can retain my all my data of itunes safe before formatting my C drive.
    Thanks in advance

    This definitely isn't intended as a substitute for tt2's tutorial (which is comprehensive and more detailed - in case of any differences I'd follow what's stated there), but in summary you should be doing the following.  I've assumed that, as per your original post, you've changed your media location to E:\iTunes and consolidated the library.  You now have a "split library" where:
    E:\iTunes contains a folder called iTunes Media which in turn contains several subfolders such as Automatically Added to iTunes, Audiobooks, Music, ...
    C:\Users\your user name\Music\iTunes contains the following folders and files:
    Album Artwork (folder)
    Previous iTunes Library (folder)
    iTunes Library Extras.itdb (file)
    iTunes Library Genius.itdb (file)
    iTunes Library.itl (file)
    iTunes Library.xml (file)
    I'd suggest making sure that you're running the latest version of iTunes before proceeding - by default, this will be the version that you download and install when you rebuild your PC.
    Before you change anything else, exit iTunes.  Now copy all of the folders and files in C:\Users\your user name\Music\iTunes to the same folder on your external drive (E:) that contains your media folder.  You should now have this:
    or something very similar.  Now restart iTunes while holding down the SHIFT key.  You will see this dialog:
    Select "Choose Library ..." and navigate to the folder on your external drive with the content as described above.  Select the iTunes Library.itl file and click OK.  iTunes will load - check that everything you expect to see is there.
    You now have a "portable library", i.e., all your media and the files that iTunes uses to organize them.  You can use this in conjunction with any PC running Windows and iTunes (noting limitations regarding your iTunes account and authorizations).  As tt2 suggested in his response, before you go any further:
    Make a backup of your new portable library to another device.
    De-authorize your iTunes account.
    Back up everything else you need to retain from the C: drive of your PC (this is beyond the scope of this forum - there's plenty of help out there on various Microsoft sites, etc.).  Just remember that once you take the plunge and reformat the C: drive anything that you haven't backed up is gone ...
    Once you've reformatted the drive and reinstalled Windows, install iTunes.  As befpre, hold down the SHIFT key when you start it up and select the iTunes Library.itl file on your external drive. You can then re-authorize iTunes and be back in business ...

  • No matter what i do i cant restore my iPod and iTunes will not recognize it

    no matter what i do i cannot restore my iPod to factory settings and iTunes will not recognize my iPod but Windows will (i've tried everything) please help me

    what happens when you connect your ipod to the computer?
    did you follow these procedures for reset and restore?
    Resetting
    Restore your iPod

  • In iTunes I'm having problems changing the "Media Kind" with a number of playlists in the OPTIONS menu from "music" to "audiobook". After going through the steps, the next time I check the items have reverted back to "music". What step am I missing?

    In iTunes I'm having problems changing the "Media Kind" in the OPTIONS menu from "Music" to "Audiobook". After going through the steps, the next time I check, the items have reverted back to "Music". What must I do to save it as an "Audiobook"?

    After more digging in the Support section here and some Google work, I turned off iTunes Match and lo and behold!  I can change the media kind to Audiobook!  So, it looks like iTunes Match locked the files up somehow and for some reason.
    I went into iTunes Store > iTunes Match > "No, Thanks" to disable it on the local PC.

  • Help please - What step am I missing????

    I am using LR3 on a PC platform.
    I have created a catalogue, done my editing, etc. on my desktop computer.
    I want to transfer the (I hope I say this correctly) virtual images to my laptop for viewing only, not manipulation. I don't want the image files on the laptop because of harddrive space.
    I took the whole directory (folder), copied it to a portable drive then placed the whole directory (folder) onto my laptop. When I open the catalog on my laptop it says the folder can't be found. The images appear VERY pixilated - it's as if the xmp files, or something are missing.
    Even though all works properly on the desktop do I need to EXPORT the catalog for it to work properly on the laptop (or other computer)? I have to believe I'm not seeing the forest for the trees and the solution is very simple.
    I hope this makes sense.
    Thanks in advance for any help.

    In looking up "RENDER" in the help menu, am I correct that the rendering must be done when initially importing the photos into the original catalog, or when I open up the catalog?
    I am not finding "render" in any of the menu options. Do you mean to set to 1:1 in the Develop Module under Navigator on the left sidebar?
    I did find this in the "Help" but nothing about where, or how to implement the render function.  http://forums.adobe.com/thread/358026?tstart=0
    Thanks for your input. I will get this!

  • HT2736 Purchasing a gift card twice me to the iTunes Store Support to complete the purchase. What step am I missing?

    I have tried to purchase a gift card twice and both times it has referred me to the iTunes Store Support to complete my transaction. Am I missing a step or going to the wrong place?

    Click here and request assistance.
    (75731)

  • What Step am I missing

    I've got an imac and a Win machine connected to Airport Extreme. The Win machine is on the floor above the Extreme Base Station. Just got a used G4 ibook, with factor installed Airport card. The laptop will detect the network when it is almost right next to the base station, but when I move to another location it drops the signal. Presumably, I would think it'd pick up the same signal where my imac is located, and the Win machine. Took the Airport Extreme that I normally use to stream internet radio to my stereo to see if that would "boost" the signal to where the laptop is going to work (my daughter's room on the third floor) but still can't catch a signal. I've gone through the configuration and it looks just like what is on the imac. What am I missing?
    Thanks

    It sounds like either the antenna wire has become loose from the AirPort Extreme card or the antenna is defective.
    Use the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card to verify that the antenna wire is installed properly.

  • What steps are needed to put a song on Itunes

    Can someone tell me the steps to do inorder to put a song on iTunes. Is it possible if you arent with a record company or if its copyrighted

    Take a look here:
    http://www.apple.com/itunes/content-providers/music-faq.html
    You will need to own or have licensed the copyright to any song and recording that you wish to sell.
    Regards.

Maybe you are looking for

  • AMS 5.0.1 Now Available for Trials

    Adobe Media Server 5.0.1 Starter Edition is now available for trials. Download by visiting http://www.adobe.com/in/products/adobe-media-server-family.html Release Notes are available here Thanks Team AMS

  • What role/roles require to administer OEM DB control jobs?

    Hi all, I've DBA role, but I can't look at the job tab on the OEM db control console. I was wondering which other role or roles I need to administer job on db console? Could you please help understand on this?

  • How to make a automatic list (item) with request

    Hello, In first i'm french so i'm sorry for my bad english! I want to make a list (Item i think) where data are comming from my DB. So when i will clic on the list i will see all the employe I don't want to put each employe one by one with the option

  • Install language in Production

    Hi gurus!! I have an installation of Portal R2 in development machine. Then, I have installed additionally spanish language. Now, I want export/import from development to production. It's necessary that I install previously spanish language in produc

  • Aperture Crashing After Update

    Hi there, I am not sure exactly when, but a month or two ago I approved an Aperture update. After doing this, I started having a lot of beach ball/crashing problems while making adjustments to photos (skin smoothing, blur--these kids of adjustments).