Unicode compatibility check of object types(swo1)

Dear all,
Where and how we can maintain unicode checks active for object types(swo1).
Please help me.
Thanks nad regards,

Hello all,
this question has been answered:
Look at the forum post started by Jorge Alonso "Unicode and object type"
Regards
Bertram

Similar Messages

Delete Business Object Type (SWO1)

Hi gurus,
How can we delete/modify objects in SWO1 that were created in a previous version. Are these actions allowed, is there a workaround if its not allowed?
Thanks for your help!
Jason

Hi Raymond,
Thank you for your help.
I have come accross that thread in SDN while doing some research already. But It does not completely answer my question.
Correct me if I'm wrong, this means there is absolutely no workaround to modify a business object type that has been created in a different version? If thats the case why does SAP enforce this rule?
Thank you

New custom object type - SWO1

Hi All,
I need to create a custom object type using SWO1.
The object type needs to be linked to a report program with selection screen(or its tcode).
The selection screen carries just 1field. The output is a new screen.
Would appreciate if any1 can tell me the step-by-step process to accomplish my objective.
-Ram.

Enter a name.
Hit create. Populate the manadatory pop ups don't populate super type.
Blow out the key field. Create a key field.
Blow out the methods - add a method. Add the code for the method - select the method and hit the program button add code as below:
BEGIN_METHOD RUNDUPREPORT CHANGING CONTAINER.
   SET PARAMETER ID 'VPA' FIELD OBJECT-KEY-PARTNEREMPLOYEEID.
export object-key-partneremployeeid to memory id '99'.
   CALL TRANSACTION 'ZEML' AND SKIP FIRST SCREEN.
*object-key-partneremployeeid.
END_METHOD.
Create your event.
My method calls an abap I wrote that is bound to a transaction.
You will need to set the release status for all of the elements of your object and the object itself.
The question I have is why. Are you calling the object in a workflow? If so you will need to use the fm as below:
DATA: OBJTYPE LIKE SWETYPECOU-OBJTYPE VALUE 'ZRM_WWCONT',
    EVENT LIKE SWETYPECOU-EVENT VALUE 'DuplicateEmail',
     OBJKEY LIKE SWEINSTCOU-OBJKEY,
        EVENTID LIKE SWEDUMEVID-EVTID.
    DATA: BEGIN OF EVENT_CONTAINER OCCURS 0.
            INCLUDE STRUCTURE SWCONT.
    DATA: END OF EVENT_CONTAINER.
    OBJKEY = KNVK-PARNR.
    CALL FUNCTION 'SWE_EVENT_CREATE'
         EXPORTING
              OBJTYPE              = OBJTYPE
              OBJKEY               = OBJKEY
              EVENT                = EVENT
        START_WITH_DELAY     = ' '
        START_RECFB_SYNCHRON = ' '
        IMPORTING
             EVENT_ID             = EVENTID
         TABLES
              EVENT_CONTAINER      = EVENT_CONTAINER
         EXCEPTIONS
              OBJTYPE_NOT_FOUND    = 1
              OTHERS               = 2.
    COMMIT WORK.
Good Luck.

Checking the object type

Hello,
I want to check a reference variable is of type CL_GUI_DOCKING_CONTAINER or CL_GUI_CUSTOM_CONTAINER.
FOR e.g in java we have instanceOF keyword . How can we find in abap

I don't have another solution off the top of my head. I am sure I could find one with a little research, but I am not going to because:-
1. You have not given me enough information. i.e. I know what version you are not on - but I don't know what version you are on
2. You have not contributed one piece of useful information for solving your problem since the first post
3. There is no evidence you have looked for this information yourself
4. The post is marked as "Answered"
5. Despite several different people responding to your post you have not indicated any of these responses have helped you
6. Checking your business card I see you have no real name, no Job Role, you work for no one, you have no relationship with SAP, you have no email address, no telephone number, no address, no recent contributions, no skills (at least according to your skills profile). In short - you do not exist
7. I have better things to do
Cheers
Graham Robbo

Unicode Compatability is a pre requisite for ECC 6.0

Hi all,
Can any body send me any link or any document which says tht Unicode Compatability is a pre requisite for ECC 6.0. its really urgent.
Regrads,
Ruchika saini

Hi
see this
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Regards
Anji

Object type for incoming payments object

Dear All,
I need to write the transaction notification for incoming payment documents, but I am unable to find out the object type for incoming payments object.
I have checked the object type 24 (receipts), but it is not for incoming payments. Any idea??
Thanks in advance..
Suresh Yerra.

Hello,
Generally try this in the transaction notification (this logs every call of transaction notification)
if not exists (select * from sysobjects where name = 'T_TransactionNotification')
begin
     create table T_TransactionNotification(
     TransactionDate datetime,
     ObjectType nvarchar(20),
     TransactionType nchar(1),
     NumOfColsInKey int,
     ListOfKeyColsTabDel nvarchar(255),
     ListOfColsValTabDel nvarchar(255) );
end;
insert into T_TransactionNotification
(     TransactionDate,
     ObjectType,
     TransactionType,
     NumOfColsInKey,
     ListOfKeyColsTabDel,
     ListOfColsValTabDel)
values( getdate(),
          @object_type,
          @transaction_type,
          @num_of_cols_in_key,
          @list_of_key_cols_tab_del,
          @list_of_cols_val_tab_del);
then issue a incoming payment (i have payed a invoice with bank transfer)
you will see the following
2010-01-20 14:45:20.907     24     A     1     DocEntry     2010390001
2010-01-20 14:45:20.903     321     A     1     ReconNum     1838
2 records will be inserted
- 1st for payment with object type 24
- 2nd for reconsiliation of invoice and payment i have payed in this example.
Regards,
J.
Edited by: János Nagy on Jan 20, 2010 2:45 PM

Note correction Instructions point towards object type FUGR / REPS

Folks
While looking at Correction Instructions for a note, its pointing to changes in Object Type FUGR, REPS
I am familiar with Object Type Class and methods and how to navigate to them but am unfamiliar on how to check the Object Type FUGR, REPS and the corrections made to them.
Is there any standard T-code or process to check the Object Type FUGR, REPS ?
Thanks

Further to above ;
SAP systems record all changes made in the system in transport requests. There are different types of transport objects, depending on the type of change. Each transport object consists of three pieces of information:
·        Program ID
·        Object type
·        Object name
Program ID can be R3TR, LIMU, or LANG. R3TR is a group of objects, and LIMU is a subobject of a larger object. This means, for example, that R3TR PROG RSPFPAR is the transport of the program RSPFPAR with all its information (source code, text elements, properties, ...), while LIMU REPT RSPFPAR describes the text elements of this program.
The complete object R3TR PROG includes the following subobjects, among others:
LIMU REPS
LIMU REPT
LIMU DYNP.
Also REPS stands for Report Source Code
Manish

How can I check an object is an instance of any type within an array of related types?

In LabVIEW, it's possible to check the runtime type of an object using To More Specific Class.vi. One usage of this would be to perform a safety check if some kind of class uses instances of another kind of class but is only able to handle a subset of that class' child types.
For instance, let's say you had Beverage.lvclass, which represents an abstract type of product, and several subclasses: Coffee.lvclass, Tea.lvclass and Soda.lvclass.
We also have a Person.lvclass which can drink beverages. A person also has preferences about the drinks they do or do not like:
Attached is an implementation of this in LabVIEW.
In Person.lvclass : Drink.vi, I have the following code. For whatever reason the wire appears broken in these snippets but it's all fine in the actual code.
In Scenario.vi, I have the following code:
What I'm finding is that no error is generated and instead I get "Yum, I love tea!", "Yum, I love coffee!" and "Yum, I love soda!". My guess is that To More Specific Class.vi casts to the static type of the "target class" input wire rather than its runtime type - and because I'm passing in elements from an array of types, the wire's static type is upcasted to the most specific type that is a superclass of the types in the array - which would be Beverage.lvclass. And so the cast is trying to determine if an object of static type Beverage.lvclass is an instance of Beverage.lvclass, which will of course be the case all the time.
Is there any way to make LabVIEW check against the most specific runtype type of an object? As in, is there something I could do that, in this example case, would allow me to get the required behaviour of Joe throwing an error when he's made to drink soda? Or is this another limitation of LabVIEW that I'm going to have to live with?
Solved!
Go to Solution.
Attachments:
TypeCastingExample.zip ‏64 KB

tst wrote:
Your guess seems reasonable. I can't check right now, but there's a primitive called preserve run time type, which should do what you want.
Cheers, that seems to have got it! I've never really looked at Preserve Run-Time Class before, but it seems to do the right thing.

How do I check Business object set type for a particular field

Hi,
I have a requirement to make the DESCRIPTION field editable for Internal Goods and Service .I have done it for Limit shopping cart with following details in the below configuration
Goto SPRO->SAP Supplier Relation ship Management
                         ->SRM Server
                             ->Coss applications and settings -> Extensions and Field Control
                                      ->Configure field control->configure control for fields substructure (in tabs field)
Bus. Object Set Type 32
Structure Field Name   DESCRIPTION
Bus. Object Type        BUS2121
Set Level                    ITEM
field editable               checked
But for Internal Goods and Service which Bus. Object Set Type should i use to achive this
Thanks
Vivek

Hello Vivek,
Execute transaction SM30 and display the Table/View /SAPSRM/V_ACTSET. Here you will find set type of all the fields.
Regards,
Arun Singh

Code Inspector/ATC checks for VKOS/VKOI object types

Dear Experts,
I found a strange behavior while executing CI checks on a transport request. TR contained only IMG Activity objects (Object Type VKOS/VKOI). After CI checks it gave errors "Recognized dead code". There is no coding for these kind of object type, I don't know where it was able to find the dead code. On debugging I found that, it is trying to populate Program name concatenatinv " SAPIC " and the object type. ( SAPICVKO). But there is no such program existing. It then gives "Recognized dead code" error.
Has anyone faced such error before? I guess this is error in the standard program.
Thank you.

Other language NUnit test frameworks similar to ABAP Unit (AUnit) commonly have project extensions for storing test results. These are useful for the unit level regression (did a new change break any existing functions). History of test results, help narrow down the nature of a current failure by answering the question of 'When did this break?' or when did it last pass? In systems dependent upon outside components the history can provide a pattern for occasional failures due to factors outside the system under test.
I see that ABAP unit test results can be added into the Code Inspector under the Check Variant.
1. Is it common or recomended to use the Code Inspector (SCI) to store AUnit test results?
2. Is it common or recomended to use Code Inspector Object variants to collect individual AUnit tests for a regresssion style 'TestSuite'?
3. What reporting or tools exists for Code Inspector history?
4. Is Application Logging the better spot for AUnit results history?
(also posted on the wiki.. apologies - I'm new to the forum and wiki)
Will Loew-Blosser

Issue While creating Business Objects in SWO1

Hi all,
I just want to add a FM to my Business Object.
In the FM, when i define the import and export parameters using "TYPE" the FM is working fine. But while adding that method to a Business Object in SWO1, an error is raised. The details are -
Data type xxxx cannot be used for methods
Message no. OL403
Diagnosis
You tried to create a method in the BOR with a data type that is not supported. Only data elements and structures are allowed as reference types for parameters in the BOR.
But when i use "LIKE" in place of "TYPE", everything is working fine. Why i want to use "TYPE" in place of "LIKE" is that "LIKE" as typing for parameters is obsolete.
Please suggest the reason for the same.
Thanks,
Deb

Deb,
TYPE is not supported in BOR method. You may check the following link for more information:
http://help.sap.com/saphelp_nw70/helpdata/EN/c5/e4ac39453d11d189430000e829fbbd/frameset.htm

Passing Values to Object Type Attributes

Hi Experts,
I need to pass values to object type attributes amount,channel and company code from zprogram.
I have got FM 'SWO_INVOKE'.But in this FM how will I pass values to 3 attributes.
I have created object type through SWO1 .Is it necessary to call FM SWO_CREATE before FM 'SWO_INVOKE'.
Please suggest.
Regards,
Kaustubh.

Hi,
I guess you will have to Initialize business object first by using the function module "SWO_CREATE' and then call the other function module to pass the attributes. I am not sure, but please check by passing the attribute name and value to the tables parameter 'CONTAINER'.
CONTAINER-ELEMENT = <Attribute name>.
CONTAINER-VALUE = <value from the Zprogram>.
Hope this will help.
Thanks,
Samson

Business Object type and Transactions

Hi, gurus.
Where can i check the matching of Business Object type with transaction type , i.e. CRM Service Process ( BUS2000116 and SLFN)?
Is it possible to change these kind of settings? Where?
Thanks a lot

Hi Michele
The transaction you are looking for should be SWO1
Then put the ex "BUS2000116" into the Object/Interface type and ...
Guess it will help you
Best Regards
Daniel

How to access Business object type attribute from a method/function modul ?

Hello,
i have created a business object type object along with attributes and methods. Now inside the method i want to access the attributes. inside the method i am writing:
data a type XXX.
a = me->attribute
this is creating a compilation error.
Now the method is defined as a function module in some package, so can anyone inform me how to access object attributes from the function module ?
pointes are awarded
Regards

Hello,
thanks for your answer, but this too did not work, "=>" is for static attributes and the attributes i have are not static. Moreover, i tried it but it gave the same error :
the abap error was when i was checking the code is :
the type me=>documenttype is unknown
as you know in SWO1 i created an object and when i create a method you link it to a function module and this is where you have the implementation of the method, so from this method how can i access the attributes on the main object that i created in SWO1
regards

Business Object Types for Z-tables

hi
could anyone please guide me how to create business-object-types for Z-tables?
thanks in advance
regards
pavan

Hi,
Business objects (SWO1) are representations of business entities.
So it is impossible to ask I need to create a business object for a z-table, because that's not business specific.
Normally when you're faced with a BO issue, you first search for useable existing BO's. In there you also search if SAP has already provided the wanted functional requirement. If this is not present, you then search for a BO which is closest to the Functional requirement and then create a subtype of that BO en extend it to suit your needs (attributes, methods, events etc.) via delegation you can then also se it in sap standard.
for more infor check the SAP Business Workflow

Unicode compatibility check of object types(swo1)

Similar Messages

Maybe you are looking for