Unified Write Filter - Software Center Fails to Load

When using Windows Embedded 8.1 Embedded Industry with the Unified Write Filter (UWF), we are having problems with Software Center. I know you can't run Optional Advertisements with UWF enabled but Software Center should still work.  Instead I get the
following error:
There is a problem showing the current status.  More information: Loading Software Center returned error code 0x87D00244 (-2016411068).
If I disable UWF it works fine. This also worked fine with UWF enabled on Windows Embedded 8 (not 8.1). Any thoughts? Thanks!

Here is a snip from the log, I do see exceptions:  Thoughts?
<![LOG[Getting all instances of CCM_SoftwareUpdate   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at GetAllApplicationsWithType)]LOG]!><time="15:29:21.2584233" date="7-24-2014" component="SCClient" context="" type="1" thread="8" file="">
<![LOG[Executing WMI query: Select * From CCM_SoftwareUpdate   (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="15:29:21.2584233" date="7-24-2014" component="SCClient" context="" type="0" thread="8" file="">
<![LOG[Getting Remote Control settings from WMI.   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at RetrieveRemoteControlSettings)]LOG]!><time="15:29:21.2904282" date="7-24-2014" component="SCClient" context="" type="1" thread="8" file="">
<![LOG[Getting Power Management settings from WMI.   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at RetrievePowerManagementSettings)]LOG]!><time="15:29:21.3064306" date="7-24-2014" component="SCClient" context="" type="1" thread="8"
file="">
<![LOG[Exception Microsoft.SoftwareCenter.Client.Data.WmiException:    (Microsoft.SoftwareCenter.Client.Common.ClientUXMain at RetreiveDataComplete)]LOG]!><time="15:29:21.3344341" date="7-24-2014" component="SCClient" context="" type="3"
thread="1" file="">
<![LOG[   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR(Int32 errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager.ExecuteQuery(String query)]LOG]!><time="15:29:21.3344341" date="7-24-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[Returning COM exception -2016411068.   (Microsoft.SoftwareCenter.Client.Data.WmiException at get_ErrorCode)]LOG]!><time="15:29:21.3344341" date="7-24-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[DialogBase base constructor called for Microsoft.SoftwareCenter.Client.Pages.MoreInfoDialog, isNotify = False   (Microsoft.SoftwareCenter.Client.Pages.DialogBase at .ctor)]LOG]!><time="15:29:21.3344341" date="7-24-2014" component="SCClient"
context="" type="0" thread="1" file="">
<![LOG[Executing WMI query: Select * From CCM_ClientAgentSettings   (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:39.3117611" date="7-24-2014" component="SCClient" context="" type="0" thread="6"
file="">
<![LOG[Retreiving App Model Applications from WMI.   (Microsoft.SoftwareCenter.Client.Pages.PageControls.TabChildListControl at RetreiveAppModelApplications)]LOG]!><time="16:02:39.3247614" date="7-24-2014" component="SCClient" context="" type="1"
thread="6" file="">
<![LOG[Getting all instances of CCM_Application   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at GetAllApplicationsWithType)]LOG]!><time="16:02:39.3287616" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Executing WMI query: Select * From CCM_Application WHERE EvaluationState != 2 AND UserUIExperience = TRUE   (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:39.3337622" date="7-24-2014" component="SCClient"
context="" type="0" thread="6" file="">
<![LOG[Exception System.Runtime.InteropServices.COMException:    (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:39.3527714" date="7-24-2014" component="SCClient" context="" type="3" thread="6"
file="">
<![LOG[   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR(Int32 errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager.ExecuteQuery(String query)]LOG]!><time="16:02:39.3567622" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Found exception of type System.Runtime.InteropServices.COMException; wrapping in type Microsoft.SoftwareCenter.Client.Data.WmiException   (Microsoft.SoftwareCenter.Client.Data.WmiException at .ctor)]LOG]!><time="16:02:39.3607625" date="7-24-2014"
component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Exception Microsoft.SoftwareCenter.Client.Data.WmiException:    (Microsoft.SoftwareCenter.Client.Pages.PageControls.TabChildListControl at RetreiveAppModelApplications)]LOG]!><time="16:02:39.3637625" date="7-24-2014" component="SCClient"
context="" type="3" thread="6" file="">
<![LOG[   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR(Int32 errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager.ExecuteQuery(String query)]LOG]!><time="16:02:39.3677631" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Retreiving classic software distribution from WMI.   (Microsoft.SoftwareCenter.Client.Pages.PageControls.TabChildListControl at RetreivePrograms)]LOG]!><time="16:02:39.3717653" date="7-24-2014" component="SCClient" context="" type="1" thread="6"
file="">
<![LOG[Getting all instances of CCM_Program   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at GetAllApplicationsWithType)]LOG]!><time="16:02:39.3757633" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Executing WMI query: Select * From CCM_Program   (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:39.3797633" date="7-24-2014" component="SCClient" context="" type="0" thread="6" file="">
<![LOG[Getting all instances of CCM_SoftwareUpdate   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at GetAllApplicationsWithType)]LOG]!><time="16:02:40.1157869" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Executing WMI query: Select * From CCM_SoftwareUpdate   (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:40.1197870" date="7-24-2014" component="SCClient" context="" type="0" thread="6" file="">
<![LOG[Retreiving App Model Applications from WMI.   (Microsoft.SoftwareCenter.Client.Pages.PageControls.TabChildListControl at RetreiveAppModelApplications)]LOG]!><time="16:02:40.1447876" date="7-24-2014" component="SCClient" context="" type="1"
thread="6" file="">
<![LOG[Getting all instances of CCM_Application   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at GetAllApplicationsWithType)]LOG]!><time="16:02:40.1497874" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Executing WMI query: Select * From CCM_Application WHERE EvaluationState != 2 AND UserUIExperience = TRUE   (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:40.1547883" date="7-24-2014" component="SCClient"
context="" type="0" thread="6" file="">
<![LOG[Exception System.Runtime.InteropServices.COMException:    (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:40.1667882" date="7-24-2014" component="SCClient" context="" type="3" thread="6"
file="">
<![LOG[   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR(Int32 errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager.ExecuteQuery(String query)]LOG]!><time="16:02:40.1707884" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Found exception of type System.Runtime.InteropServices.COMException; wrapping in type Microsoft.SoftwareCenter.Client.Data.WmiException   (Microsoft.SoftwareCenter.Client.Data.WmiException at .ctor)]LOG]!><time="16:02:40.1757885" date="7-24-2014"
component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Exception Microsoft.SoftwareCenter.Client.Data.WmiException:    (Microsoft.SoftwareCenter.Client.Pages.PageControls.TabChildListControl at RetreiveAppModelApplications)]LOG]!><time="16:02:40.1807887" date="7-24-2014" component="SCClient"
context="" type="3" thread="6" file="">
<![LOG[   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR(Int32 errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager.ExecuteQuery(String query)]LOG]!><time="16:02:40.1847888" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Retreiving classic software distribution from WMI.   (Microsoft.SoftwareCenter.Client.Pages.PageControls.TabChildListControl at RetreivePrograms)]LOG]!><time="16:02:40.1897891" date="7-24-2014" component="SCClient" context="" type="1" thread="6"
file="">
<![LOG[Getting all instances of CCM_Program   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at GetAllApplicationsWithType)]LOG]!><time="16:02:40.1947892" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Executing WMI query: Select * From CCM_Program   (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:40.1987894" date="7-24-2014" component="SCClient" context="" type="0" thread="6" file="">
<![LOG[Converting WMI object to application data.   (Microsoft.SoftwareCenter.Client.Data.WmiConverter at ConvertToApplication)]LOG]!><time="16:02:40.9248124" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Retreiving Updates from WMI.   (Microsoft.SoftwareCenter.Client.Pages.PageControls.TabChildListControl at RetreiveUpdates)]LOG]!><time="16:02:40.9298125" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Getting all instances of CCM_SoftwareUpdate   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at GetAllApplicationsWithType)]LOG]!><time="16:02:40.9338128" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Executing WMI query: Select * From CCM_SoftwareUpdate   (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:40.9388127" date="7-24-2014" component="SCClient" context="" type="0" thread="6" file="">
<![LOG[Getting Remote Control settings from WMI.   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at RetrieveRemoteControlSettings)]LOG]!><time="16:02:40.9688143" date="7-24-2014" component="SCClient" context="" type="1" thread="6" file="">
<![LOG[Getting Power Management settings from WMI.   (Microsoft.SoftwareCenter.Client.Data.WmiDataConnector at RetrievePowerManagementSettings)]LOG]!><time="16:02:40.9778144" date="7-24-2014" component="SCClient" context="" type="1" thread="6"
file="">
<![LOG[Exception Microsoft.SoftwareCenter.Client.Data.WmiException:    (Microsoft.SoftwareCenter.Client.Common.ClientUXMain at RetreiveDataComplete)]LOG]!><time="16:02:41.0018149" date="7-24-2014" component="SCClient" context="" type="3"
thread="1" file="">
<![LOG[   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHR(Int32 errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager.ExecuteQuery(String query)]LOG]!><time="16:02:41.0068152" date="7-24-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[Returning COM exception -2016411068.   (Microsoft.SoftwareCenter.Client.Data.WmiException at get_ErrorCode)]LOG]!><time="16:02:41.0118152" date="7-24-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[DialogBase base constructor called for Microsoft.SoftwareCenter.Client.Pages.MoreInfoDialog, isNotify = False   (Microsoft.SoftwareCenter.Client.Pages.DialogBase at .ctor)]LOG]!><time="16:02:41.0168154" date="7-24-2014" component="SCClient"
context="" type="0" thread="1" file="">
<![LOG[Executing WMI query: Select * From CCM_ClientAgentSettings   (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)]LOG]!><time="16:02:41.0218159" date="7-24-2014" component="SCClient" context="" type="0" thread="1"
file="">

Similar Messages

  • E71: Communication Center fails to load SMS messag...

    I have an E71, which I connect to my laptop and use to update my Calendar etc. I also read and reply to SMS from the Messages option of the communication Center.
    However, the messages fail to load intermittently, whereas other things like Contacts and Calendar load properly.
    I have tried reinstalling the software , but it doesn't work.

    Thanks very much for your advice.
    I normally set "memory card" to work and store my all messages, and I do backup (*.npu file, right?) for both internal and SD card memory (I select all when functioning "Back up" in PC suite) to my notebook using PCsuite from time to time. With this, could you tell me where can I check and open my messages in my notebook. I just want to make sure that folders under "My folders" under "Messaging" menu are really backed up and can be opened by my notebook.
    Besides, in case that I use my microSD card to work with my all messages, at least I should be able to locate where all messages are kept, shouldn't I? Could you advise how can I locate such files by "File manager" function?
    Thank you in advance again.

  • Running Task Sequence from Software Center failed after rebooting to WinPE (0x8022001B)

    Hi all
    I have created a task sequence to refresh client OS to windows 8.1 x64. I ran this task sequence in software center on a windows 7 client, everything went well without any fails.
    But when I ran the same ts again after it refreshed to Windows 8.1, it failed immediately after rebooted to WinPE. It shows a warning with error code 0x8022001B.
    My test environment: SCCM 2012 R2 (Windows Server 2012 R2). Client Device: Lenovo L430
    Any suggestions? Thanks in advance!
    SMSTS.log file shows below:
    <![LOG[Configuring 1 of 3 network adapters]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="netsettings.cpp:186">
    <![LOG[Configuring DHCP]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:417">
    <![LOG[DNS suffix: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:428">
    <![LOG[DNS server search order: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:437">
    <![LOG[DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:444">
    <![LOG[Full DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:452">
    <![LOG[Permitted IP protocols: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:457">
    <![LOG[Permitted TCP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:461">
    <![LOG[Permitted UDP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:465">
    <![LOG[Tcpip Netbios options: 0]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:474">
    <![LOG[Enable WINS: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:480">
    <![LOG[WINS server(s): ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:489">
    <![LOG[MAC address: a4:17:31:f3:e4:28]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:503">
    <![LOG[Adapter index: 0]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:512">
    <![LOG[Adapter name: WLAN]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:516">
    <![LOG[Getting namespace "Microsoft-Windows-TCPIP" for architecture "amd64"]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="smiinterface.cpp:222">
    <![LOG[Added list item with key value 'a4-17-31-f3-e4-28']LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="smiinterface.cpp:441">
    <![LOG[Configuring 2 of 3 network adapters]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="netsettings.cpp:186">
    <![LOG[Configuring DHCP]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:417">
    <![LOG[DNS suffix: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:428">
    <![LOG[DNS server search order: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:437">
    <![LOG[DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:444">
    <![LOG[Full DNS registration enabled: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:452">
    <![LOG[Permitted IP protocols: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:457">
    <![LOG[Permitted TCP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:461">
    <![LOG[Permitted UDP ports: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:465">
    <![LOG[Tcpip Netbios options: 0]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:474">
    <![LOG[Enable WINS: false]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:480">
    <![LOG[WINS server(s): ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:489">
    <![LOG[MAC address: a4:17:31:f3:e4:28]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:503">
    <![LOG[Adapter index: 1]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:512">
    <![LOG[Adapter name: WLAN]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:516">
    <![LOG[spItem->CreateListElement( var, &spChildItem ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\smiinterface.cpp,439)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="smiinterface.cpp:439">
    <![LOG[Failed to create list element with key value 'a4-17-31-f3-e4-28' (0x8022001B)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="smiinterface.cpp:439">
    <![LOG[pSetupPass->addListItem( m_spSettingsEngine, pszNamespace, pszPath, pszKeyValue ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\smiinterface.cpp,1187)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="smiinterface.cpp:1187">
    <![LOG[m_pSMIInterface->addListItem( SetupPassValue[eSetupPass], pszComponentName, pszPath, pszKeyValue ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\xmlanswerfile.cpp,738)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="xmlanswerfile.cpp:738">
    <![LOG[AddListItem( eSetupPass, XML::TcpIp::ComponentName, XML::TcpIp::Interfaces::InterfaceElement, sIdentifier ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\xmlanswerfile.cpp,1063)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="xmlanswerfile.cpp:1063">
    <![LOG[m_pImpl->AddAdapterTcpIpSettings( XMLAnswerFileImpl::WindowsPE, adapterInfo ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\winpeanswerfile.cpp,176)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="winpeanswerfile.cpp:176">
    <![LOG[pAnswerFile->AddNetworkAdapter(adapterInfo), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\netadaptersettings.cpp,575)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netadaptersettings.cpp:575">
    <![LOG[Failed to configure adapter 1 (0x8022001B)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="netadaptersettings.cpp:575">
    <![LOG[adapterSettings.Configure( pAnswerFile ), HRESULT=8022001b (e:\nts_sccm_release\sms\framework\osdcore\netsettings.cpp,188)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="netsettings.cpp:188">
    <![LOG[Failed to configure network settings for adapter 2 (0x8022001B)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="netsettings.cpp:188">
    <![LOG[m_pNetSettings->Configure(pAnswerFile), HRESULT=8022001b (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootstrapsettings.cpp,191)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="bootstrapsettings.cpp:191">
    <![LOG[this->createAnswerFile(sAnswerFilePath), HRESULT=8022001b (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootstrapsettings.cpp,140)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="bootstrapsettings.cpp:140">
    <![LOG[pSettings->configureAnswerFile(), HRESULT=8022001b (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootshell.cpp,595)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="bootshell.cpp:595">
    <![LOG[Execution failed with error 8022001B.]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="3" thread="808" file="bootshell.cpp:703">
    <![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="environmentscope.cpp:493">
    <![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="environmentlib.cpp:335">
    <![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="environmentlib.cpp:553">
    <![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="0" thread="808" file="utils.cpp:809">
    <![LOG[RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="2" thread="808" file="utils.cpp:809">
    <![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="2" thread="808" file="utils.cpp:842">
    <![LOG[End program: ]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="bootshell.cpp:725">
    <![LOG[Finalizing logging from process 800]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="tslogging.cpp:1741">
    <![LOG[Finalizing logs to root of first available drive]LOG]!><time="14:10:49.114+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="tslogging.cpp:1583">
    <![LOG[LOGGING: Setting log directory to "E:\SMSTSLog".]LOG]!><time="14:10:49.130+480" date="01-09-2015" component="TSBootShell" context="" type="1" thread="808" file="tslogging.cpp:1808">

    Then it's using a different boot image that doesn't have the NIC driver. The OS that the TS starts out in has no impact on the WinPE environment. Either the driver is there and properly loads or it doesn't -- there is not and cannot be any connection to
    the OS the system was booted into prior to PE booting.
    Thus, the only possibility here is that the boot image does *not* have the NIC driver in it. You need to verify which boot image I being used in both cases.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • After sp1- R2 upgrade, Clients cannot open Software center

    Hi
    I am in a bit of a bind.. 
    We upgraded from SP1 to R2 (not CU2 just the r2 for starters)
    All went well and all clients in our organization have been upgraded. 
    Unfortunately I've discovered that the software center on the clients can no longer load.
    It seems the ccm client is running fine it's just the software center that is not loading when I try to open it.
    The error from the software center windows is(translated from Danish so I am unsure of the correct MS wording):
    The Software center cannot be loaded. Problem loading the required components. You can try starting the software center later...
    Only thing I've found so far that stands out in the logs so far (sccclient_MYDOMAIN@mrt_1.log) is:
    <![LOG[Default window boundaries for this size work area are 0,0,1200,750 (Microsoft.SoftwareCenter.Client.SCClient at SetWindowPosition)]LOG]!><time="06:47:16.5761062" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
    <![LOG[SetServicePortalLink: Portal URL is set to http://aal-sccm01/CMApplicationCatalog (Microsoft.SoftwareCenter.Client.Pages.UtilityClass at SetServicePortalLink)]LOG]!><time="06:47:16.7331062" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
    <![LOG[Unhandled exception was caught. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="06:47:16.7421062" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
    <![LOG[Exception System.Windows.Markup.XamlParseException: Der blev udløst en undtagelse under indstilling af connectionId. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="06:47:16.7451062" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
    <![LOG[ ved System.Windows.Markup.WpfXamlLoader.Load(XamlReader xamlReader, IXamlObjectWriterFactory writerFactory, Boolean skipJournaledProperties, Object rootObject, XamlObjectWriterSettings settings, Uri baseUri)
    ved System.Windows.Markup.WpfXamlLoader.LoadBaml(XamlReader xamlReader, Boolean skipJournaledProperties, Object rootObject, XamlAccessLevel accessLevel, Uri baseUri)
    ved System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream)
    ved System.Windows.Application.LoadComponent(Object component, Uri resourceLocator)
    ved Microsoft.SoftwareCenter.Client.Pages.PageControls.AvailableSoftwareDetailsControl.InitializeComponent()
    ved Microsoft.SoftwareCenter.Client.Pages.AvailableSoftwarePage.InitializeUIBeforeDataRetreived()
    ved Microsoft.SoftwareCenter.Client.Common.ClientUXMain..ctor()
    ved Microsoft.SoftwareCenter.Client.SCClient.Window_Loaded(Object sender, RoutedEventArgs e)
    ved System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
    ved System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
    ved System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
    ved System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
    ved System.Windows.BroadcastEventHelper.BroadcastEvent(DependencyObject root, RoutedEvent routedEvent)
    ved System.Windows.BroadcastEventHelper.BroadcastLoadedEvent(Object root)
    ved MS.Internal.LoadedOrUnloadedOperation.DoWork()
    ved System.Windows.Media.MediaContext.FireLoadedPendingCallbacks()
    ved System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
    ved System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
    ved System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
    ved System.Windows.Media.MediaContext.Resize(ICompositionTarget resizedCompositionTarget)
    ved System.Windows.Interop.HwndTarget.OnResize()
    ved System.Windows.Interop.HwndTarget.HandleMessage(WindowMessage msg, IntPtr wparam, IntPtr lparam)
    ved System.Windows.Interop.HwndSource.HwndTargetFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
    ved MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
    ved MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
    ved System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
    ved MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)]LOG]!><time="06:47:16.7491062" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
    <![LOG[Exiting... (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnExit)]LOG]!><time="06:48:37.5541062" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
    Really hoping someone can help here!
    Kindest regards, Martin

    This is log excerpt from when I open software center until I close it (I accept the error windows)
    <![LOG[Starting up... (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at Main)]LOG]!><time="21:23:05.8827861" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
    <![LOG[Client is running .Net Version4.0.30319.18444 (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at Main)]LOG]!><time="21:23:05.8867863" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
    <![LOG[Current working area is 0,0,1600,860 (Microsoft.SoftwareCenter.Client.SCClient at SetWindowPosition)]LOG]!><time="21:23:05.9277886" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
    <![LOG[Default window boundaries for this size work area are 0,0,1200,750 (Microsoft.SoftwareCenter.Client.SCClient at SetWindowPosition)]LOG]!><time="21:23:05.9317889" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
    <![LOG[SetServicePortalLink: Portal URL is set to http://aal-sccm01/CMApplicationCatalog (Microsoft.SoftwareCenter.Client.Pages.UtilityClass at SetServicePortalLink)]LOG]!><time="21:23:06.0917980" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
    <![LOG[Unhandled exception was caught. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="21:23:06.1017986" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
    <![LOG[Exception System.Windows.Markup.XamlParseException: Der blev udløst en undtagelse under indstilling af connectionId. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="21:23:06.1057988" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
    <![LOG[ ved System.Windows.Markup.WpfXamlLoader.Load(XamlReader xamlReader, IXamlObjectWriterFactory writerFactory, Boolean skipJournaledProperties, Object rootObject, XamlObjectWriterSettings settings, Uri baseUri)
    ved System.Windows.Markup.WpfXamlLoader.LoadBaml(XamlReader xamlReader, Boolean skipJournaledProperties, Object rootObject, XamlAccessLevel accessLevel, Uri baseUri)
    ved System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream)
    ved System.Windows.Application.LoadComponent(Object component, Uri resourceLocator)
    ved Microsoft.SoftwareCenter.Client.Pages.PageControls.AvailableSoftwareDetailsControl.InitializeComponent()
    ved Microsoft.SoftwareCenter.Client.Pages.AvailableSoftwarePage.InitializeUIBeforeDataRetreived()
    ved Microsoft.SoftwareCenter.Client.Common.ClientUXMain..ctor()
    ved Microsoft.SoftwareCenter.Client.SCClient.Window_Loaded(Object sender, RoutedEventArgs e)
    ved System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
    ved System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
    ved System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
    ved System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
    ved System.Windows.BroadcastEventHelper.BroadcastEvent(DependencyObject root, RoutedEvent routedEvent)
    ved System.Windows.BroadcastEventHelper.BroadcastLoadedEvent(Object root)
    ved MS.Internal.LoadedOrUnloadedOperation.DoWork()
    ved System.Windows.Media.MediaContext.FireLoadedPendingCallbacks()
    ved System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
    ved System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
    ved System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
    ved System.Windows.Media.MediaContext.Resize(ICompositionTarget resizedCompositionTarget)
    ved System.Windows.Interop.HwndTarget.OnResize()
    ved System.Windows.Interop.HwndTarget.HandleMessage(WindowMessage msg, IntPtr wparam, IntPtr lparam)
    ved System.Windows.Interop.HwndSource.HwndTargetFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
    ved MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
    ved MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
    ved System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
    ved MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)]LOG]!><time="21:23:06.1097990" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
    <![LOG[Exiting... (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnExit)]LOG]!><time="21:23:10.2580363" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
    Kindest regards, Martin

  • Software download failed n96

    hi all,i cannot load some software from the disc or from nokia downloads.
    n series system utilities and nokia software updater fail to load.running vista,
    any ideas would be appreciated
    thanks

    18-Oct-2008 03:38 PM
    andy1433 wrote:
    hi all,i cannot load some software from the disc or from nokia downloads.
    n series system utilities and nokia software updater fail to load.running vista,
    any ideas would be appreciated
    thanks
    Hi Andy, Did you previously installed pc suite on your pc before continuing the installation steps?
    Best Regards,
    Wally

  • Master data load for 0COSTCENTER (Cost Center) failing

    Hi Experts
    I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
    (R) Filter Out New Records with the Same Key
          (G) Starting Processing...
          (R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
    Could you help me on this one please.
    Regards
    Akshay Chonkar

    Thanks All
    I have got the issue resolved
    The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
    So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
    Everything is fine now thanks for your help.
    Regards
    Akshay Chonkar

  • DIO Port Config & DIO Port Write Block Diagram Errors (Call Library Function Node:libra​ry not found or failed to load)

    Hi Guys, need help on this.
    I have this LabVIEW program that used to work on the old computer.
    The old computer crashes most of the time, so I upgraded the computer
    and used its Hard Drive as slave to the new computer.
    I have no idea where are its installers since the guy that made the program 
    is not in my department anymore.
    I downloaded all the drivers needed from NI: NIDAQ9.0, NIVISA,NI488.2, 
    and drivers of some instruments needed in the setup. I'm using LabVIEW8.2.
    Everything's fine until I open the LabVIEW program for our testing.
    Here goes the error:
       DIO Port Config
       DIO Port Write
    Block Diagram Errors
       Call Library Function Node: library not found or failed to load
    Attachments:
    ErrorList.JPG ‏200 KB

    Honestly, I'm a newbie on Labview. I just want this old program to run on the new computer.
    The guys that installed the drivers on the old computer are no longer here in my department.
    And I have no idea where the drivers are. So I just downloaded the drivers needed for my hardware and instruments.
    Here's my hardware: (cards: PCI-DIO-96, PCI-GPIB), (instruments: SCB100,E4407B, HP83623, HP3458, HP8657)
    OS: Windows XP Pro
    By the way, I have unzipped the TraditionalDAQ drivers. First I tried the 7.4.1, but installation error appeared.
    I thought maybe the installer is corrupted, so I downloaded the 7.4.4 and unzipped it.
    But, still same installation error appears. I don't understand, both TraditionalDAQ drivers have same installation error.
    Now I have tried the DAQmx8.7.2 driver, bu still the DIO Port Config and DIO Port Write have errors.

  • Failed to load DLL: HSAPI during Software Installation of Palm TX for Windows XP

    I have been attempting to load Palm TX software for Windows XP and receive error number: 0x80040702 Failed to load DLL: HSAPI.  I am able to download the zipped software from the Palm site.  After unpacking and beginning installation, I receive the error mentioned above.  Any ideas?
    Thanks!
    Post relates to: Palm TX

    I have been trying to REinstall PalmOne (on to Windows XP) and getting precisely the
    same message  ie  'error no 0x80040702 - failed to load dll:HSAPI'   ...  nobody seems to be able to help.
    Any suggestions please ???

  • HT4623 I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    Hi there KrisonCastillo,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Load filter attributes task failed? Won't open my stock trading platform. Any ideas?

    I use CMC Markets online stock trading platform, 'Market tracker'. The log in page loads. But the platform won't open after I log in. An error message says "Load filter attributes task failed". What am I missing? IE browser loads the platform OK but I don't want to use IE.

    FWIW i get this now and then on my winblows 'puter and just chalk it up to that. I've flushed caches and queues and rebooted and all that who-ha and quite frankly when it locks up it ticks me off to no end ('cuz it SHOULDNT do that) but i have a cold one and figure they have kindergartners doing the system programming nowadays and go from there.
    Message was edited by: Stillgrass

  • Conundrum - PXE boot fails vs. "reinstall OS from software center" succeeds

    Hi All.
    I am facing a bit of a conundrum..
    In our offices I am seeing some strange behaviour when trying to PXE boot into a TS to reinstall or install OS. 
    If I use F12/PXE boot then the deployment fails during OSD.
    If I take a client (the same client as I tried pxe booting with) that is fully installed and reinstall OS via software center then the deployment completes. 
    Any ideas what could be wrong?
    Kindest regards, Martin

    Daniel:
    Clients are both laptops & desktops.
    I "feels" like it's the network that's acting up but I really can't see where. 
    PXE boot works.. it's not until it tries to apply the OS... 
    whether it's a timeout or what it is I cannot say.. 
    Gerry: After all will you be likely to rebuild your entire estate in-situ any time soon?
    You know... we are actually On the verge" of upgrading & Streamlining our entire network infrastructure..
    But I'd still love to solve the problem.. 
    We never had this issue when we only had MDT as deployment tool. 
    it's not until sccm came into the picture that this issue has arisen.
    Kindest regards, Martin

  • Software install from software center is failing

    Hi,  We have a application install that is failing when trying to install from software center.  Its a straightforward .msi install.
    Which log file would we look at to see why the application install is failing?
    Thanks
    Thanks Lance

    Hi,
    Please see AppEnforce.log and AppDiscovery.log if the installation already started.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Software Center Application Uninstallation Button Greyed Out and Deploying an Application with Uninstall switch Fails

    Hi,
    I tried everything I could find on the internet but no luck so far. I can successfully deploy MS Visio 2013 to the clients. I also want to be able to uninstall it from the clients. On the client machine Uninstall button is greyed out. This deployment is
    installed as "Available" and there is only one deployment type within that MS Visio 2013 Application.
    I tried the following uninstall commands in my deployment:
    setup.exe /uninstall
    setup.exe /uninstall
    VisPro
    /config .\vispro.ww\uninstallvisio.xml
    “\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe” /uninstall VisPro /config "\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml"
    \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe /uninstall VisPro /config \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml
    I checked Product ID from Setup.xml and I know it is correct. My uninstallvisio.xml' content is below:
    <Configuration Product="VisPro">
    <Display Level="basic" CompletionNotice="yes" SuppressModal="yes" AcceptEula="yes" />
    <Setting Id="SETUP_REBOOT" Value="Never" />
    </Configuration>
    Last night, I downloaded and installed Cumulative Update 1 for SCCM 2012 R2 and I haven't tried the deployment after the update,yet. I will try it today but please let me know what else to check.
    Yavuz Selim Atmaca

    After I updated SCCM Server and test client pc with CU1 , I tried to deploy visio as Required. It installed successfully. Then I uninstalled visio by deploying the application with Uninstall Action.
    After that I tried to deploy visio as "Available" to see if Software Center Uninstall button works. However visio deployment does not come to Software Center's Available Applications List. I check the status of the deployment under the Deployments monitoring
    node and it says Success "Already Compliant". I dont know what it means. Does config manager thinks that visio already installed?
    Yavuz Selim Atmaca
    2 or 3 hours later that -Succes "Already Compliant"- status of the deployment under the Deployments monitoring node is vanished automatically and Software Center application list showed the new deployment. I installed it and  uninstalled it succesfully.
    So, you are right Solution is the CU1 but I am still wondering why my available deployment took so time to be visible in Software Center althought I didn't enter any schedule to be available.
    Yavuz Selim Atmaca

  • Deploying Software to WES7 Device with enabled Write Filter

    Hi all,
    we are deploying SCCM Applications to WES7 with enabled FBWF. The Option "Commit changes at deadline during maintanance window" is enabled on the Deployment, and the installation itself works perfectly fine. (Reboot, Installation with Lockscreen,
    Reboot)
    But after the installation is finished, it takes some minutes (up to 20) until the device reboots to re-enable the Write Filter.
    Is there any flag or command we can set or execute at the end of the installation to reboot and unlock the Workstation?

    I don't have a direct answer, but this forum is for Windows Embedded POSready. You might want to post to the Windows Embedded Standard 7 forum:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=quebecservicingdeployment
    www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

  • Software center permissions error, SCCM 2012

    I'm getting a strange error in the software center.  The applications and packages deploy without any problems but users receive an error when trying to install the application or package through software center.  They receive the error "Insufficient
    Permissions for Software Installation" and "Your IT department has set restrictions for this software that prevent it from installing on your computer".  I have attached the screenshot.  We are running SCCM 2012 on Server 2008 R2 with SQL Server
    2008 R2 on a separate server.  If this is something that is configured on the server I don't remember ever doing it but I can't find that error anywhere on Google so I'm kind of at a loss for the moment.  Again, any help is greatly appreciated.  Thanks.
    Über Random

    Oddly encountering this error as well on an HP MT41 with EWF turned on. Under the local Administrator account.
    Installs are set to "All Users".
    SCCM 2012r2 CU3 Environment.
    This is my SCNotify and SCClient Log exerpts
    SCNotify
    Executing WMI query: Select * From CCM_ClientAgentSettings (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)
    SCClient 12/31/2014 11:58:05 AM 1 (0x0001)
    SCClient
    DialogBase base constructor called for Microsoft.SoftwareCenter.Client.Pages.BasicMessageDialog, isNotify = False (Microsoft.SoftwareCenter.Client.Pages.DialogBase at .ctor)
    SCClient 12/31/2014 11:58:45 AM 1 (0x0001)
    Executing WMI query: Select * From CCM_ClientAgentSettings (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at ExecuteQuery)
    SCClient 12/31/2014 11:58:45 AM 1 (0x0001)
    BasicMessageDialog: displaying to user = Insufficient Permissions For Software Installation (Microsoft.SoftwareCenter.Client.Pages.BasicMessageDialog at .ctor)
    SCClient 12/31/2014 11:58:45 AM 1 (0x0001)
    BasicMessageDialog: user clicked ok (Microsoft.SoftwareCenter.Client.Pages.BasicMessageDialog at ButtonOK_Click)
    SCClient 12/31/2014 12:00:03 PM 1 (0x0001)
    So, from that, I took I should look in WMI, here is the contents of the properties of CCM_ClientAgentSettings.
    ROOT\CCM\ClientSDK\CCM_ClientAgentSettings
    =====================================
    COMPUTER : MyTestUnit
    CLASS : CCM_ClientAgentSettings
    =====================================
    BrandingTitle : MyCompanyNameHere, INC
    DayReminderInterval : 7200
    DisplayNewProgramNotification : True
    EnableThirdPartyOrchestration : 0
    HourReminderInterval : 900
    InstallRestriction : 0
    OSDBrandingSubtitle :
    ReminderInterval : 28800
    SUMBrandingSubtitle :
    SuspendBitLocker : 0
    SWDBarndingSubtitle :
    SystemRestartTurnaroundTime : 600
    Thoughts?
    EDIT: Found this in the SCCM Documentation Library doc file (Feb 1, 2013).
    Why do I see an error message about insufficient permissions from a Windows Embedded device when I try to install software from Software Center?
    You can install applications only when the write filter on the Windows Embedded device is disabled. If you try to install an application on a Windows Embedded device that has write filters enabled, you see an error message that you have insufficient
    permissions to install the application and the installation fails.

Maybe you are looking for

  • Authorization issue during Jump

    Hi all, I am faced with an authorization issue when I am jumping from a BW report into an ABAP report in R/3. The particular BW report is built on a Multiprovider and when I jump to the R/3 report it displays a message saying that I have no authoriza

  • Game Center not responding

    Game Center will not load is anyone else having this problem today

  • ITunes crashes when iPod is connected

    Hello, I just got the 5th gen iPod and everytime I connect it to my powerbook g4 (10.4.3) itunes INSTANTLY crashes, as well as when trying to play a video itunes instantly crashes (this has been going on on and off since the video update) I am using

  • ORDCHG with accountings

    Hi, I need to transfer Purchase Orders from a 4.6 to an ECC 6.0. I'm using IDOC ORDERS and ORDCHG. I have a purchase order in outbound and also a Purchase (not sales) order in Inbound, because document created in 4.6 should be copied in 6.0. I added

  • AP workflow comments not saved after posting

    dear Ive posted it in controlling forum, but it had to be rather here. I when i check SAP AP workflow document overview id like to see comments entered by accountant as the reason for document parking. as soon as the document gets posted i see the ap