Uninstalled software deployed by SCCM still remains in Installed Applications

Hi experts
I noticed when we manually uninstalled a software which was deployed via SCCM, in Software Center, under Installed Applications, the software is still listed as installed there.
I know the only way to make the software unlisted under Software Center is to remove the software deployment on the Primary Site Server, refresh the client policy and the software will disappear from the Software Center, but that means it will disappear for
all the other computers which will need the software as well. I don't think this is a workable solution.
Possible to share if the uninstalled software will automatically disappear from the Installed Application to Available Application? If yes, how long would it take, does it depend on the next cycle where the SCCM client get new policies from the Primary Site
server?
The reason why I am asking this is because it might confuse the end user.
User: I thought you have uninstalled the software!
IT: Yes we did
User: Then why is it still listed under Installed Application in Software Center. It is bugging me! You didn't do your job.
Thank you

Hi,
You could check AppEnforce.log and CIAgent.log to confirm the current state for this application after running the Application Deployment Eval Cycle.
1. Find the ScopeID of the application in AppEnforce.log.
2. According to the ScopeID, check the current state for this application.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Software Update doesn't seem to know installed applications

Hi Apple support
An application tells me a new update is available (e.g. "iTunes 7.5 is available") but +software update+ reports to me there was no update! Also, i had to download manually Mac OS X 10.5.1!
Is it a known problem and do you have any solutions?
Regards
Romain Haenni

It seems as if you have your application in a sub-folder (still within Applications) that Leopard doesn't recognize them. They have to be in the root level of the Applications folder.
This was also the case in Tiger. It seems as if Apple could easily address this issue and have Software Update look in sub-folders within the Applications folder.

Automating Software Deployment using SCCM Powershell cmdlets

Hello,
I am trying to automate our Software Update deployment procedure. However I am having problems trying to download software updates associated to a Software Update Group using Start-CMSoftwareDeployment cmdlet.
In this instance, I have a Software Update Group with one update KB2817369. When I use Start-CMSoftwareDeployment cmdlet, I get the error message "Warning: The object <Name of Software Update> cannot be downloaded".
Any ideas how I can automate the download of the security updates associated to a Software Update Group ?
Thanks
Imran
Imran

Hello Prabha,
I had a look at Automatic deployment rules but I do not think this would work in our environment because I just want to be able to download the software updates for a specific Software Update Group and at a later date create the corresponding Deployment
Package.
The process I am trying to automate is:-
1) Create Software Update Group with appropriate software updates
2) After removing any redundant software updates from the Software Update Group, download the software updates
3) Create a Software Update Deployment package and deploy to collections.
Hope you can help.
Imran
Imran

SCCM OSD Reference Image / Install Application Failure

We are running 2012 R2 CU2 and are trying to build and capture a reference image for windows 8.1, his is not a MDT task Sequence. The image (WIM) seems to lay-down correctly however none of the applications seem to install and I believe it is because
the default build and capture sequence never actually logs in as a user? There are no requirement of the application preventing installation and the 'use in TS' check box is checked on the applications. Any thoughts.

Have you examined the smsts.log?
Does the deployed OS have connectivity?
Have you added the SMSMP property to the Setup Windows and ConfigMgr task?
Jason | http://blog.configmgrftw.com

HT3905 Do I still need to install the HD writer AE 4.0 software that came with my Panasonic HC-V500 video camera or can I just upload video directly to my MAC using i-frame and the i-photo program?

I purchased the Panasonic HC-V500 video camera and it came with the HD AE 4.0 software. Do I still need to install this disc on my MAC or can I upload video directly to my computer by using i-frame and the i-movie program?

Hi glhiker,
Your video clips will import directly into iMovie. It's a great video editing program. I'll include some quick video tutorials to get you started below:
Apple - Support - Videos
When you open the iMovie application, click HELP > iMOVIE HELP on the menu bar to access the manual for the program. One of the first topics is Importing Video.
Down the road, you may be interested in our professional video editing application, called Final Cut Pro X.
A quick overview of the application can be found here:
Final Cut Pro X: Frequently Asked Questions
Have fun!
- Judy

I just got an iPhone 4s and when I tried to sync it with iTunes it said to uninstall and download the 64bit version. I uninstalled all ove my apple software before I could get it to install at all. Still doesnt work. Doesnt even recognize my phone.

I just bought an iPhone 4s yesterday and it wouldn't connect to the iTunes 10.6.3 I had already on my laptop for my husbands 3gs and my brother in laws iPhone 4. Neither of them ever had a problem syncing with itunes. When I tried I was told to uninstall itunes and reinstall a 64bit version. Took several attempts but I finally got it. Then it said that I needed to upgrade my apple mobile device support and for me to uninstall itunes again and reinstall it. I have done all of this several times and still cannot get it to work right. I have uninstalled every Apple software listed on my computer and had to reinstall it all. Help!!!!!!!

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Uninstalled Logic Pro 8, But still picking up Software Update.

Hello Guys,
Need help. I have already uninstalled my Logic Pro 8.
But somehow, every time I performed a Software Update - it will still somehow detected as if that I have Logic Pro 8 installed on my MBP and asked me to have it update with the latest version.
I have also already removed the file such as com.apple.logic.plist (something like that), and still - during Software Update - it will still picked up the latest Logic Pro 8 version to be update.
Am I missing some files that I am suppose to trash here as well?
Please guide.
Thank you very much in advance.
Best Regards,
Jonathan Gan

Dear Zuelito,
Thank you very much for your help again,
Yes - I have already tried restarting soon after my previous post. Still no luck.
When run SU - still it pick up the Logic Pro 8 latest version update. Grrrrr...
As for my Leopard version, Yes - I have already have it updated to 10.5.2 as well.
I have also check out the 'Ignore Update' configuration as you mentioned. It can be located and works exactly the way you describe it above. The only different is the 'Reset Ignored Updates' menu. For my case, if I were to 'Reset Ignored Updates' - I was advise from the pop up menu right before 'Ignore Update' was apply that it can only be done from the application menu itself. And since my application has already been removed. I guess I can no longer do the 'Reset Ignored Updates' if I want to.
So in the end, I didn't proceed on with the 'Ignore Update' method.
I know it's not really a big deal to have that little update being picked up everytime. After all, I can just unchecked it each time and it will not be downloaded and updated. But sometimes it really annoys me. I am sure you know how it felt too. heh heh heh Especially when our Mac is not performing the way it should be.
I have also learned how to do in-depth search for system files too. But still, nothing was located when the keyword Logic was keyed in.
Anyway, Thanks again. Let's hope we will find ways to tackle this issue.

How to find who modified Software Update deployment in sccm 2012

Hi,
How to find who modified(Date & Time) software update deployment in SCCM 2012 ?

In the Console :
Monitoring / System Status / Status Message Query
Right Click : "Deployments Created, Modified, or Deleted" - Show Message and select your period.
You'll have your information there.
Benoit Lecours | Blog: System Center Dudes

Sccm software deployment

Dear Exprt,
How could i create advertice in sccm 2007 for software deployment as follows.
1.First remove older version
2.Prompt to user for computer restart.
3. once restarted run again software installation
[email protected]

I appreciate that this isn't exactly what you've requested, but I can't give any better advice than the previous posters!
If possible, I'd suggest that you set the advertisement to only apply when No user is logged in, and set the success return code as Hard Reboot. Also set the advertisement as Required.
Providing no user is logged in, the computer will install and then reboot. As for the installation of the new version... On
the Options tab you can set a condition based on a WMI query, registry setting, or installed product code.
Your users actually log off? How about the user who powers the machine off, powers on the next day and about the time he gets logged in his machine is forcefully rebooted?
I haven't looked at a 2007 site in a couple years now but I don't recall there being options that you are speaking of.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

I have ipad-2 16 gb wifi after upgrading to latest software 4.3.5 my wifi icon is bleached and showing no wifi i tried resetting several times and also tried re booting it and i restored the software several times but still the problem remains please

Respected sir,
i have ipad-2 -16gb wifi. i recently upgraded to latest software 4.3.5 by using i tunes. after updating my ipad wifi icon is bleached and showing no wifi tried resetting several times and also tried rebooting it and i restored the software several times but still the problem remains please help me out.
waiting for your response.
i am using windows 7 operating system.
with regards
vinayaka

Vinayaka-
After all you've tried, Dah*veed is probably right about needing warranty assistance.
But first check to be sure Settings-Airplane Mode is set to OFF, and Settings-WiFi-WiFi is set to ON.
Try unplugging your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect to your WiFi.
Fred

Software deployment never works

The software deployment component has not been updated since windows server 2000 as far as i can see and it has never worked well, requires .msi and is just rubbish.
Why is there by now no good way to roll out software to users and why does the software gpo never install and uninstall software correctly, always comes up with pointless errors in the event log that never help.
Why is there no effort to improve this basic functionality?
SME are not going to buy SCCM and sccm is not that much better at rolling out software anyway.
I end up having to use login scripts and other non sense.

Yes, I have rolled out a thin image with MDT and so on.
One of the problems is that i installed X software as user context with gpo with a version 10.0. to windows 7 32bit roaming profiles.
Then I applied update to X software server to 10.2, swapped out the msi with the 10.2 version, then users moved to windows 7 64bit with new policy and new image from mdt. Then when they log in with roaming profile the gpo tries to install 10.2 of the software
and it says it can't remove the previous version. I don't see why it needs to remove the previous version because it doesn't. Running the msi within the user session manually works without admin rights and any issues, so i know there is no problem with the
msi.
I should have applied the 10.2 update to the users profiles before they moved to the new image and this would have allowed for the previous version to be detected properly. Even though I have tried pushing out the new version to the old image, it still fails
in teh same way.
Is it not possible to remove the package 10.0 then add package 10.2. Do i realy have to keep 10.0 in there and than add 10.2 and go to upgrades tab and specify that 10.2 is the new version of 10.0. Is it realy that rubbish that it can't just isntall the
msi?
However even just pushing out a flash update fails. Comes up with similar problems trying to find the previous version.I tried removing the previous version from program and features to see if it would work if there was no version installed it has similar
problems.

Lync 2013 x64 silent client deployment via SCCM 2012 SP1

Greetings everyone!
I ran into a problem with Lync 2013 x64 silent deployment.
I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
Added them as applications to sccm software library.
Deployment of Lync 2013 x86 application was a success with over than 80% compliance.
But all Lync 2013 x64 automatic installations finish with different errors.
I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
My membership query-rules for this collection:
Office 2013 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
Office 2010 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
The same configuration works with Lync 2013 x86 deployment, except other setup folders.
When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
sites with deployment point.
Thanks in advance.

Hi,
Here are some tips and tricks for your reference.
Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Adobe photoshop cc 2014 crashes at startup / GC driver up to date (nvidia 740M) / windows 8 / uninstalled software reinstalled disconnected creative cloud and reconnect / nothing solved /error report ready to send

Help
in this for 3 and a half hours now and really nervous bout it.
adobe photoshop cc 2014 crashes at startup /
solely photoshop : lightroom illustrator indesign okay /
GC driver up to date (nvidia 740M) /
windows 8 /
uninstalled software and reinstalled from creative cloud app /
disconnected profil creative cloud and reconnect /
moved preferences out /
I just have installed a fresh OS windows 8 and nothing but the adobe apps /
nothing solved /error report ready to send
(edit)
funny cannot send the image of the errors because i DO NOT have a photoshop working version !)
(did the screen copy, exported in jpeg srgb from illustrator)

exported the error log from lightroom still not working as it seems like the file (it's a screenshot) is more than a 8mo size file !
i ignored i was using a 8k screen till now
please help
Cheers,
Arnaud.

Uninstalled software deployed by SCCM still remains in Installed Applications

Similar Messages

Maybe you are looking for