Unique ID of Android Tablet...

Hi,
I need to develope an application in which I need to get the Unique Id of the Android Tablet.As this is my first Android application I am not aware how to get this. This application has server connectivity using PHP. Please help me to get out of this.
Thank you.

Sorry for misunderstanding. So in this case I would use ANE. I found this: https://github.com/freshplanet/ANE-DeviceId

Similar Messages

Connect to my 10.6 mail server from an android tablet

I have an Samsumg Galaxy Tab 2 7.0 (Android 4.0.1) tablet and I need to set up my email for my business on it. I have it set up fine on my iPhone and iPad and desktop (Mac and Windows both), but when I try to set it up on my Android tablet it either says the username or password is incorrect (I am positive it is not) or it cannot contact the server. I've about pulled my hair out trying to figure out which setting is messing things up, but on the tablet the choices are few, so I'm about at a loss. The only thing I can think of is that there is no option on the Android to use MD5 challenge/response for authentication. If that were it, why would it say "Incorrect username or password"?
I know this isn't an Android forum, but it IS an Apple email server. Any peculiarities I might be overlooking might be the problem, so that is why I ask here.

There is nothing unique, special or weird going on here, there is only the usual slog of figuring out what an individual mail client requires and offers, and what the mail server provides and can offer, and aligning the two within your local expectations and needs.
OS X Server uses standard Unix mail server tools. Postfix and Dovecot. And again, there is nothing special, weird, or unique here.
Check your mail server logs for details around the connection failure. Assuming you see the connection error arriving, of course, and that's a clue in itself. You'll want and need to look at both the IMAP or POP logs, and the SMTP logs.
The usual triggers are the firewall settings, the particular required ports for your mail server configuration, whether SSL is used or not, and possibly the encoding of the credentials.
Check with the Android client settings, with the Android documentation, and possibly then with an Android forum around what your particular client requires, when connecting with Postfix and Dovecot tools. (These are standard Unix tools, so I'd expect there are Android-specific discussions around the network. Here's one discussion, though the trigger for what that Android user encountered is probably a firewall block against outbound TCP port 25 connections from random boxes — boxes that are not known mail servers — that is increasingly implemented around the 'net.)
And FWIW, OS X Server 10.6 has a layer of management tools atop Postfix with Server Admin key among these, and I'd manage via those first and not via the direct postfix commands. But the lower-level postfix commands do work on OS X Server, if you're looking around. In other words, read-only, don't use the lower-level Postfix tools to make changes, unless Server Admin et al don't allow you access to the setting.

How do I direct my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

How do I add my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

Hi,
Given your ptinter supports print from Android, you need an app called HP ePrint. Please use Google Store to install it:
https://play.google.com/store/apps/details?id=com.hp.android.print
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

WiFi Tether Your Android Tablet to Your Cell Phone - LG Marquee Boost Mobile Example

Greetings Earthlings and Android Fans....
Just posted this to my blog and wanted to share a text version here. Check it out if you're looking to tether your tablet to your cell phone. I tethered my Thrive to my Boost Mobile LG Marquee.
From: Kaio's Klassroom: WiFi Tether Your Android Tablet to Your Cell Phone - LG Marquee Infrastruct...
Want to tether your tablet to your cell phone, but Ad-Hoc got you down? How about trying this nifty little tweak that got me up in running in a jiffy!!
I recently got a new LG Marquee Prepaid Phone with Boost Mobile @Amazon and I really love it. Only problem is, I was spoiled with my last phone because it was rooted to support Infrastructure tethering and I had no idea how difficult and unusual that was. I've since done some research with my new Boost Mobile LG Marquee, and after a little trial and error (and some lucky Google searches) I have successfully tethered my LG Marquee to my Toshiba Thrive tablet!!!
Here's what I did:
Mandatory Disclaimer - The following information is for informational purposes only. Proceed at your own risk!!! Rooting will void your warranty and could "brick" your phone if you do something wrong!! So if you damage your phone, or any of your tech, that's on you.
NOTE: If you don't have an LG Marquee, just search "your phone model" + "root" and you should find plenty of information specific to your phone. There's always people wanting to do the same thing you are, so it's just a matter of finding the information that's already out there. Once your phone is rooted, come back here and start on Step 2.
Step 1 -- Root your LG Marquee (You do NOT need to root your Tablet)
The following information was taken from LG Cell Phones Blog and are for the LG Esteem, which is a generic root mod.
> Enable USB Debugging on your LG Marquee: Go to Settings > Applications > Development > Enable Debugging and check the box.
> Download and install the LG USB drivers at: LG Cell Phones Blog You want the file "LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3. 2.1_2.exe"
> After installing the USB drivers connect your phone to a PC. On the phone, pull down the notification bar at the top of the phone's screen and click on USB Connected. Set the phone to Internet Connection mode (CHARGE ONLY not Mass Storage).
> Download "LG_Esteem_Root.zip" at: LG Cell Phones Blog. Unzip the file and double-click on the run.bat file.
Note: Kaspersky Internet Security will flag this file as a Trojan: "Exploit.Linux.Lotoor.ag" I don't believe this file is a Trojan, per se. I believe it's required during the root process. When I let Kaspersky eliminate the file, my phone wouldn't root. So I decided to run the root program on a secondary computer, just in case. I disabled Kaspersky temporarily on that computer, and ran the root zip and my phone rooted without a hitch. I later scanned my phone with Webroot Security and AVG, and neither found any viruses on my phone, so I believe the process is safe. Technically, rooting your phone probably does involve a Trojan hack, hence why Kaspersky flags that file. However, I must reiterate to proceed at your own risk.
Just in Case -- How to Unroot Sprint LG Marquee:
Use root explorer and delete superuser.apk from the /system/app folder. Go to the Android market and download and install super user. Use root explorer again and delete su from /system/bin. Go to the market and uninstall super user. Do a factory reset & you will be back to square one.
Step 2 -- Verify that you have properly rooted your phone with this nifty free app: Root Checker Basic
If you did everything right, you should get a message that says "Congratulations, this device has root access." If you fail to get that message, go back to Step 1.
Step 3 -- Download the Android WiFi Tether for root users app
Currently, the only version of Android WiFi Tether that worked for me was 3.1-beta7. The newest version doesn't work properly with tablets, so be sure to get 3.1-beta7. Here's a link and QR code for easy access: WiFi Tether 3.1-beta7 apk
Step 4 -- Configure WiFi Tether app:
I've tried many settings, but these are the only ones that have worked. Start the app and grant Super User Permissions. Then Click Menu to get into the app's setting. Inside the Settings, do the following:
> Change Device Profile to: Samsung Galaxy S
> Change Setup Method to: Netd (Master)
> Enable WiFi Encryption: Check box to Enable
> Change Pass Phrase to: any 13 digit password of your choice.
> Change SSID to: any name of your choice.
> Change Channel to: 4 (2427mhz)
> Disable Update Check: Check box to Disable.
> Click your phone's Back Arrow to Exit back to the app's Main Screen
> Touch the WiFi button onscreen to start tethering.
> Grant Super User Permissions
Note: If you get Error Code 67, Click Dismiss. If you update, I don't know what will happen; my guess is it will disable the ability to tether. But if I click Dismiss, my tethering is Enabled, and works perfectly.
Step 5 -- Grab Your Tablet & Start Tethering
> Go to Settings > Wireless & Networks > Check the box to Enable WiFi > Click WiFi Settings > Under WiFi Networks, find the SSID for your tethering app that you entered in Step 4 above. > Click on the SSID of your tethering app > Enter the 13 digit Pass Phrase you created in Step 4 above and Click Connect.
That's it! Congratulations -- your tablet should now be tethered to your cell phone!
Now that you're tethered to your cell phone, be smart, and DON'T download a ton of gigabytes. Just be smart about it, and you should be fine. Remember, tethering to your cell phone probably goes against the terms of service with your cell phone carrier, so DON'T abuse the privilege.
Now that you're the envy of all your friends, why not test your data speeds: SpeedTest App - FreeMy data speed test results with my Toshiba Thrive tablet tethered to my LG Marquee:
Download: 855kbps Upload: 302kbps
That's pretty great for a 3g no-contract cell phone with unlimited data.
Happy tethering everyone!
Go forth and Androidify!
Hugs, Kaio
;oD
From: Kaio's Klassroom: WiFi Tether Your Android Tablet to Your Cell Phone - LG Marquee Infrastruct...

If you have a compatible device without Android Market access, you can download Firefox directly from our FTP server. See the instructions here for details: https://wiki.mozilla.org/Mobile/Platforms/Android

EPUB exported from InDesign works on iPad and not on Android tablets

I've edxported several similar books to EPUB from InDesign CS5, using the same technique each. After exporting from InDesign, there's a lot of tweaking of the HTML code and some changes to the content.opf and toc.ncx, but the finished product for all of the books works fine on iPads but some do not work on Android tablets. There are six separate InDesign documents in each epub book...three small, one large, and then two small. Some of the books work fine on Android tablets, but for some of them, the first three documents show up fine, but when one advances to the large document, the book closes. There's no error message. Any ideas what the problem might be? Are there size limitations for documents on Android machines?

As you have found out - it doesn't work.

HP Deskjet 2540 - connect to pc via USB, can I print from android tablet as well?

Hi,
I've just bought a HP Deskjet 2540 all in one printer.
I have set it up via USB connection to my windows 7 pc, and it is printing fine.
I also have an android tablet. Can I also print from this whilst using the printer via USB on my pc.
Any help on if this is possible and what steps I need to do if it is would be appreciated (I have been reaeding the help section on the website but I am just getting more confused).
Lesley

Hi @Lesley54R,
You don’t need to have the printer listed with the two different connections unless you’ll be switching back and forth from being connected by USB cable and wireless. You can delete the one you don't think you'll be using.
To print the web page, please use the browser found within the app. I’ve included the ePrint Mobile App FAQs document for your reference.
In addition I’ve also included the ePrint Product Specifications document. This document has the list of supported email programs, file types and print limitations.
Hope this helps!
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Scanning prob from Envy 4502. to Android tablet

When I try to scan from printer to Android tablet it comes up Computer not Found. Install Printer Software.I have got HP Remote All in One app and eprint app installed. On my settings it shows the plug in app and the printer name and model. What else do I need to do to get this to scan from front panel of printer to tablet???
When you open the all in one app on tablet it will say scan on screen and then when you press it the printer will scan it to tablet but you cannot size it correctly (when you put A4 size in settings on tablet it still comes up too small to read. HELP me pls as I am quite new to all this. Thanks.

Hi,
Firstly you can't scan from your printer to your tablet, you have to scan from your tablet. Please touch the "wheel" at the top right corner and change dpi to say around 200 and try again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Verizon email no longer downloads to Outlook or Android tablet

Before moving to an area (SC) that doesn't have Verizon Internet, I registered my domains and have been receiving and sending my verizon.net mail with no problems since November 2014. However, since Thursday 3/26/15, email clients on my Samsung Android tablet and Outlook on my laptop no longer can connect to the server. The programs continue to get emails from my other email domains with no problems. I can only get my verizon mail using webmail. My attempt to call verizon support and get help has been unsuccessful. Why do my Tablet an PC Email clients fail to contact your server? Please help! Thanks.

Hi rjshess,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

How do I take all the bookmarks on my android tablet and sync them with my desktop, if I've had to change my recovery key?

Anciallry to my profile During my attempts to when attempting to sync <pre><nowiki>1349979922766 1349979922789 Sync.Status 1349979922800 Sync.Status 1349979922809 Sync.Status 1349979922819 Sync.Status 1349979922819 Sync.Status 1349979925683 Sync.Status 1349979925704 Sync.ErrorHandler 1349979925705 Sync.Service 1349979925705 Sync.Service 1349979925706 Sync.SyncScheduler 1349979925706 Sync.Service 1349979925707 Sync.Status 1349979925707 Sync.Status 1349979925814 Sync.Resource 1349979925814 Sync.Resource 1349979925815 Sync.Service 1349979925815 Sync.Service 1349979925815 Sync.Service 1349979925815 Sync.Service 1349979925815 Sync.Service 1349979925815 Sync.CollectionKeys 1349979925815 Sync.Service 1349979925817 Sync.Engine.Clients 1349979925818 Sync.Engine.Clients 1349979925944 Sync.Collection 1349979925944 Sync.Collection 1349979925945 Sync.Engine.Bookmarks 1349979925945 Sync.Engine.Bookmarks 1349979926487 Sync.SyncScheduler 1349979926488 Sync.SyncScheduler 1349979926488 Sync.SyncScheduler the android device logs becoming corrupted on Desktop Computer A (windows 7), and a subsequent sync of the corrupt information to Desktop Computer B (OSX 10.6), I'm left with all 1400ish bookmarks residing on Mobile Device C (Android Tablet).
restore, I had firefox services generate a new Recovery Key, prior to my knowing that my bookmarks were stored in "C".
now, on the desktop, i see:
Sync.Service DEBUG Exception: Component returned failure code: 0x80070057 (NS_ERROR_ILLEGAL_VALUE) [nsINavBookmarksService.removeFolderChildren] Stack trace: BStore_wipe()@resource:///modules/services-sync/engines/bookmarks.js:1253 < <file:unknown> < Engine__wipeClient()@resource://services-sync/engines.js:498 < <file:unknown> < WrappedNotify()@resource://services-sync/util.js:142 < <file:unknown> < Engine_wipeClient()@resource://services-sync/engines.js:504 < <file:unknown> < resource:///modules/services-sync/service.js:1563 < <file:unknown> < WrappedNotify()@resource://services-sync/util.js:142 < <file:unknown> < WeaveSvc_wipeClient()@resource:///modules/services-sync/service.js:1548 < resource:///modules/services-sync/service.js:1246 < <file:unknown> < WrappedNotify()@resource://services-sync/util.js:142 < WrappedLock()@resource://services-sync/util.js:97 < <file:unknown> < _lockedSync()@resource:///modules/services-sync/service.js:1186 < resource:///modules/services-sync/service.js:1177 < <file:unknown> < WrappedCatch()@resource://services-sync/util.js:71 < <file:unknown> < sync()@resource:///modules/services-sync/service.js:1165 < <file:unknown> < <file:unknown>
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG Beginning user-triggered sync.
DEBUG User-Agent: Firefox/15.0.1 FxSync/1.17.0.20120905151427.
INFO Starting sync at 2012-10-11 13:25:25
DEBUG Clearing sync triggers and the global score.
INFO In sync().
INFO Resetting Status.
DEBUG Status.service: success.status_ok => success.status_ok
DEBUG mesg: GET success 200 https://scl2-sync623.services.mozilla.com/1.1/vq5tgzklyepycf5agigiay47ime5ytho/info/collections
DEBUG GET success 200 https://scl2-sync623.services.mozilla.com/1.1/vq5tgzklyepycf5agigiay47ime5ytho/info/collections
DEBUG Fetching global metadata record
DEBUG Weave Version: 1.17.0 Local Storage: 5 Remote Storage: 5
INFO Sync key is up-to-date: no need to upgrade.
DEBUG Fetching and verifying -- or generating -- symmetric keys.
INFO Testing info/collections: {"passwords":1349979572.28,"tabs":1349979636.47,"clients":1349979114.63,"crypto":1349974699.42,"forms":1349979571.23,"meta":1349975849.38,"prefs":1349975802.81,"bookmarks":1349976817.63,"addons":1349979226.66,"history":1349979571.65}
INFO Testing for updateNeeded. Last modified: 1349974699.42
DEBUG Refreshing client list.
INFO 0 outgoing items pre-reconciliation
INFO Records: 0 applied, 0 successfully, 0 failed to apply, 0 newly failed to apply, 0 reconciled.
DEBUG mesg: GET success 200 https://scl2-sync623.services.mozilla.com/1.1/vq5tgzklyepycf5agigiay47ime5ytho/storage/bookmarks?full=1&sort=newest&limit=1
DEBUG GET success 200 https://scl2-sync623.services.mozilla.com/1.1/vq5tgzklyepycf5agigiay47ime5ytho/storage/bookmarks?full=1&sort=newest&limit=1
DEBUG Resetting bookmarks last sync time
DEBUG Deleting all local data
DEBUG Sync error count has exceeded 3; enforcing backoff.
DEBUG Starting client-initiated backoff. Next sync in 2777931 ms.
DEBUG Next sync in 2777931 ms.</nowiki></pre>
arent as friendly to export, but i see similar complaints about crypto.

It sounds like your desktop profile is (still?) corrupt; it's failing to process the wipe on bookmarks. So let's be super thorough: we'll clean up the desktop, then reconnect so the Android device's data will replace it.
My suggestion is to do the following. Read all of the steps before you start. I recommend that your Android device is on wifi.
# On your Android device, go to Settings > Accounts & sync. Remove your Sync account. Your Firefox profile will be unchanged.
# On your desktop, create a new profile.
# On the new profile, assuming you want to re-use your Sync account, follow the instructions below.
# Re-pair your Android device with the new desktop profile, and wait for it to finish syncing before syncing the desktop.
Connecting to an existing sync account:
# Set Up Sync
# I have an account
# I don't have the device with me
# Enter username and password, choose "I have lost my other device"
# You'll get a dialog with a new recovery key. Choose "Change recovery key".
Let me know if you have any problems!

How can I get my android tablet to show up on my mac?

I am trying to get my android tablet to show up on my mac. I plug it in and the tablet is charging from the mac. So I know Ive got a good connection. I tried using android transfer program but it will not see my tablet HELP!!!!

Ughh

How to print on HP deskjet 100 mobile L411 from android tablet

How to print on HP deskjet 100 mobile L411 from Asus Transformer android tablet
Pablo_B

Hi,
You can use Printshare app on your tablet. I believe you have to pay a small amount for it:
https://play.google.com/store/apps/details?id=com.dynamixsoftware.printershare.premium&hl=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I direct my HP 5510 e-all-in-one scan output to an Android tablet

How do I direct my HP 5510 e-all-in-one-printer scan output to an Android tablet? My printer is connected to my wireless network. During the printer setup I was able to identify both my desktop and laptop computers as "scan to" computers and they both appear as destinations on the printer display. I have been able to direct the printer scans to these two computers without problems. But I have not been able to find a way to direct the scan output to my Android tablet (Android Honeycomb 3.2.1). I have downloaded and use HP ePrint Home and Biz app and can print from the tablet. This app does not appear to offer a way to direct the printer scan output to be sent to the tablet. Any suggestions???
This question was solved.
View Solution.

Hi,
Currently, HP does not provide any scanning solution for Android OS.
Scanning from the front panel will allow you to scan to a computer only, and not to any mobile OS.
I would suggest you to search the Android Market for any 3rd party scan application, as the HP ePrint Home & Biz app currently provide scan capabilities for Apple iOS and Nokia Symbian as you may find listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02532765&cc=us&dlc=en&lc=en&product=5063582&tmp...
Hope it helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I sync a new desktop computer to an existing sync account, already set up in an android tablet?

The story is, I had my desktop and android tablet synced, with a significant amount of bookmarks in the desktop PC. Then my desktop hard drive was reformatted and Win XP reinstalled.
I had not taken note of the recovery key previously (nor backed up the firefox profile), thinking that I would just easily sync the "new" desktop back to the existing account.
I can see the synced bookmarks in my tablet (but associated to the now nonexistent desktop).
I just can't find a way of retrieving the sync key or recovery key from the android tablet, to be able to join the "new" desktop to the same account.
Anyone have any idea of how to do it?
I've seen references to an add-on that would show the key but it doesn't work with the current firefox version (19)
An alternative would be to export the bookmarks from the tablet, but I couldn't find how to do it either. The option to export is not there on the android version.
Thanks in advance!

I've tried, but it requires me to enter a Recovery Key and I can't find a way to retrieve that from the android tablet.
Am I missing something?

Published Course (Captivate 8) not displaying at correct size on Android tablet (HTML5)

I am now publishing my system simulations as both SWF and HTML5. They are set to NOT scale as they should fit correctly on all my client's screen resolutions. The simulations are built at 1006 x 627 pixels.
When uploaded to the LMS and tested on various devices everything displays OK on PC (swf) and ipad (html5) but I'm having issues on Android 4.1.2.and 4.2.2 (Chrome 37).
The whole of the simulation screen should be visual on the Android tablets which have a screen resolution of 1280x800. When taking into account the player top and bottom bars I still have 656 pixels to display the course content. However the 1006 is scaling to 1280 making the course height too high and dropping off the bottom of the screen.
If I publish with 'scaling' turn on the course now fits on the Android screen correctly i.e. height correct with spare width, but on non Android devices i.e. PC with high resolution, the course is now scaling up.
Why is the course not locked to correct size in Android?

Hi,
I have added two images, one from the Android tablet which is stretching the slide to fill the screen width and another from a high resolution PC which is showing the simulation as the correct size.
The android device is 1280x800, the simulation is 1006x627
Trevor

How can I pair Firefox browser intalled on Android tablet with my TV?

My TV is connected to my home network internet through Smart Hub on Samsung Blu-ray. The Smart Hub has its own browser which is very slow and can not be paired with my Android tablet. I could pair YouTube with YouTube/pair though ! I tried to download FF, but the Smart Hub won't do it?
In short, how can I run the internet from my laptop or Android tablet ?
Thank you in advance for you help.

Hello Philipp, thank you very much for your response and help. Yes, definitely I will read the documentation of my device manufacturer...
I hope I will be able to figure this out.
Have a blessed day,
Samir

Unique ID of Android Tablet...

Similar Messages

Maybe you are looking for