Unit o measure issue for blanket orders

I am trying to create a blanket order for cost center using catagory for blanket order. When I enter Unit of measure say "each" it replaces with "LE" and gives me an error- " Unit of measure LE not defined- please check your input" when I go into details of message - it tells me that " The key for the unit of measure you entered is not defined in table T006." and "Define the unit of measure through Customizing (Materials Management)."
next when I look for this table it tells me that this is not active. At this time I can not save the PR.
Can anyone tell me where is this config in MM?
Thanks for your help in advance
Raj

Hi,
If the UOM of LE is there you neeed to check what is in the commercial and technical col;umns for it.
In SAP the LE is the internal code for the UOM and NOT the one that is entered in transactions.
LE normally has a technical name of AU and it is AU that should be used in the UOM fields on requisitions and POs etc. NOT the LE.
Try using the UOM that is in the technical column of LE.
Steve B

Similar Messages

Unit of measure conversion for CIN is not relevant for pricing

During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
Any light how to fix this issue?
Thanks,
Suseela. V

Dear Suseela,
You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
Hope it will help. Thanks!
Regards
Indra

Error while doing Good Issue for Production Order using BAPI

Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date   = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind   = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant     = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = zptp_s_rf_migo_261-aufnr
    IMPORTING
      output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header       = gs_header
      goodsmvt_code         = gs_gmcode
    IMPORTING
      goodsmvt_headret      = gs_headret
    TABLES
      goodsmvt_item         = gt_item
      goodsmvt_serialnumber = gt_serial
      return                = gt_return.
Thanks in Advance.

hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM

Unit of Measure issue - Need to be changed from volume to no dimention.

Hi Experts,
           I have a unit of measure as TB, which is tube. This is a volume unit. The user want to change this as "Pls have this be corrected as a non-dimensional unit of measure ". For this what is impact on system.
          Precautions to be taken to change this unit of measure. what are all we have to do. like closing all open POs, PR, RFQ,SO , production order, planned orders etc.
          And what about the stocks for these materials which are using these UOM.
          Please suggest me, what are all we have to do, before going for a change.
Thanks & Regards,
Poorna.

Dear,
The base unit of measurement for a material cannot be changed due to movements history exists. This will result to inconsistency in reports and data.
Suggested to create similar new material with new user desired UOM.
Please find the SAP HELP on this as below:
Diagnosis: You wanted to change the base unit of measure. However, you can do so only under certain circumstances, including the following:
- If there are no stocks of the material in the current period and in the previous period.
- If there are stocks in the previous period, you can clear them as follows:
a) Post the stock in the previous period to the current period (for example, using movement type 561 Posting date 30.06.XX ) so that the stock for the previous period is the same as the stock for the current period.
b) Clear the stock with the posting date in the previous period (for example, using movement type 562 Posting date 30.05.XX).
- If no purchase requisitions, purchase orders, or scheduling agreements exist for the material.
Procedure : Choose Display errors to see why you cannot change the base unit of measure for this material.
The pushbutton Display errors appears only in dialog mode, not in data transfer or in mass maintenance. If this message appears in data transfer or in mass maintenance, and you want to know why the base unit of measure cannot be changed, access the material in dialog mode using the relevant transaction below, try to change the base unit of measure as required, and then choose Display errors:
Lastly, you can considered an Alternate Unit of Measure to do the Conversion from KG to Liter. You then could use your Alternate Unit of Measure as your
Purchased UoM and PLant UoM.
Given the level of activity sometimes required to change the base UOM, it often makes more sense just to add an alternative UOM on the material master.
Maintain the relationship between the Base UOM and the new UOM on the material master and then continue to procure the material in the new UOM rather than the base UOM. If stocks exist I would think it is unlikely that their existing UOM is incorrect as they must have been receipted in that UOM at some point.
Regards,
Syed Hussain.

Unit of measure issue in BOM

For a component Unit Of Measure issue is maintained as "KG". In BOM "Unit of measure" is mainatined a s"G". I have to pull a report for a list of meterials and if the unit of measure mainatined in material master does not match with the unit of measure in BOM , qty needs to be converted to Base Unit of measure. Where i will
find the conversion maintained in SAP.
Tausif.

Hi
Check MM table in SE16
MARA     General Material Data
MARC     Plant Data for Material
MARD     Storage Location Data for Material
MARM
Reward if usefull
Vishal...

Different movement types for Goods Issue for different Order Types

Hello Experts,
Can we maintain different movement types for Goods Issue for different Order Types at the time of automatic creation of reservations?
Thanks and regards,
Satyajit

Satyajit,
Folow the link given,
Re: How to add new movement types when creating reservation?
Hope this helps you.
SmanS

BAPI For Create Goods Issue for Sales order with picked quantity

Hi friends,
Is there any BAPI available to create Goods issue For sales order with picked quantity...............?
we hv used BAPI_OUTB_DELIVERY_CREATE_SLS
with sales order .......its creating delivery order but not doing goods issue with piked quantity........

pls,reply its argent

Quality inspection for the items issued for Sales order

Hi, How to map the qc for the items issued for sales order?

Dear Yadav,
-Activate insp type 10 in the Material Master-QM view insp setup (MM01)
-Create Inspection plan (QP01) with usage as Goods issue & assign Insp characteristics
-Create Sales order (VA01)
-Delivery against the Sales order (VL01N) or through sales order menu. Delivery Insp lot gets created after Delivery is made.
-Do results recording and take usage decision (QA32)
Note:
-This inspection is non stock relevant inspection. There will be no stock posting through Quality Management.
-Post Goods issue in the delivery can be made only after taking the usage decision.
Regards,
Keerthi.

Unit of measure issue

Dear friends,
issue : for Unit of measure EA , decimal is allowed. i.e in sales order or PO system will allow 10.334 EA . I need it without Decimal.
issue resolution status: I have maintained NO decimal in T code CUNI for UOM EA. But till sytem allows Decimal . I tried with Fresh PO, SO, MB1C etc .
Please help me to resolve .

HI
In CUNI under Display area for Decemial Places see what is the valid number range maintained .
I think it is 0-14 , then input 0 instead of NO and try again

EDI unit of measure issue

One of our customers orders a product in unit measure EA (each). Our stock-keeping unit is PL (pail). The output does get processed and issues message:
"PL is not assigned to an ISO unit of measure (item 000001, field VRKME)".
Even if I updated the table for PL, I'm almost certain it will be rejected by our customer because their system is expecting the line item to have unit of measure "EA".
I would appreciate suggestions as to how to address this issue.
Thank you,
bak

Hello,
In the SPRO --> IMG --> General Settings , you have measurement units setting. in this you have ISO code maintenance. Check whether PL is assigned here.
Prase

Unit of Measure Error in Purchase order

Hi Gurus,
While saving the Purchase order i am getting the Error message
"Unit of measure KG not defined for language GB."
We are trying to place this PO outside the US .PR already created and released.But when i am converting the PO and saving it gives me this error .
Thanks a lot in Advance
Edited by: Metroid01 on Jul 23, 2009 12:55 AM

How do i create the UOM in CUNI for the specific language? I can see the below
Int meas unit---->KG
Display
Commercial--->KG
Technical----> Kg(in Po it is taking g is lower case)
in ALE/EDI--->ISO Code is EA.
Can you check this if it is the right set up in config.
Thanks a lot for the help.

Third party purchase unit of measure issue.

Hi Friend,
I have created sales order for third party process unit of measure in sales order is in Meter qty is 3.7 mater.
But PR & PO id created in the unit of measure Piece i.e. 3.7 pieces.
GR is already done for qty 3 pieces. Now when user is trying to do GR for qty 0.7 pieces we are getting error message serial number management allows only whole number.
How can I do GR for this. Also I want to know what setting I need to do to have PO in unit of measure M i.e. Mater.
Thanks,
Kiran

Its all about your material master unit of measure.
In Material master - Basic data 1 view - Base Unit of measure will be picked in PR.
In Material master - Purchasing - order Unit will be picked in PO (If blank, then base unit of measure)
In Material master - Sales Organization 1 - Sales unit will be picked in Sales Order.
And for your error message, please search in SCN, you will get many thread regarding the error.
Regards
Dev

Unit of Measure(UOM) for PO and Packing

Dear all,
we have got issue about UOM for Purchase order and Packing.
When we create PO with vendor then we use UOM is set for example: sofa.
but when we GR from Vendor the storekeeper check artice follow UOM is Set. (packing).
pls help us

Dear,
Basing on your post - your stock keeping unit is SET.
Purchase order is SOFA.
Go to material master and maintain basic UOM as SET and Order unit as SOFA.
Whenever you are raising PO using this material, the PO UOM will be SOFA. Maintain the conversion factors if applicable.
One more way in PR - Source of supply tab you can mention purchase organization and order unit as SOFA (this wihthout making changes in material master). But everytime create PR indentor has to pay attention towards this entry.
Regards,
Syed Hussain.

Base Unit of Measure issue

Hi Experts,
As per the scenario, my client is manufacturing a rod whose std length is 6m. But, he is selling it in other sizes also like 4.3, 5.5 so on. So, the price should be get calculated on length & no of pieces.
As, per my understanding I had put base unit of measure as meter & sales unit as ea. Conversion rate has been maintained as 1ea=6meter. But, then as he is selling it in different sizes also. How to calculate price in such condition. Please throw some light on it.
Regards,
Prashant

hi
i am not expert
based on b knowledge
when you fix the unit of measure 1ea=6m , based on this system will pick the quantity , you raise the sale order for each then system will take meters like 1ea=6m,
you requirement it 4.3.5.5 m , so you can change the unit of measure for particular material , like 1m =1m , then system will take correct quantity , and based on this system will take price , your pricing is manual or automatic , when manual no problem , automatic you maintain , quantity based price ,
you can change the unit of measure for material at mm02 , at additional data, you can maintain
please try this
regards
sankar

Unit of measure issue in Product Category Units Quota Planning

Hi experts,
My client needs to maintain quota for salespersons based on R/3 product hierarchy level. (1000 kg of Product Hierarchy Level 01234 per month, 2000 KG of Product Hierarchy Level 56789 per month, vs.). R3PRODHIER is the category assigned to Sales application.
So in Quota Planning, sub-assignment block Product Category Units, I want to maintain quotas. I press Add button, mark the Hierarchy level I'd like to plan quota to, and press Choose button, but "Unit of Measure" field does not fill up. Surprisingly, in the dropdown list, there is not an option which I can select (i.e. 'KG'). The list is empty, even after I fill Q1, Q2, Q3 and Q4 values. So, I am not able to use the quota planning functionality.
Any ideas why this is happening and how to fix it?
Thanks for your time,

Hi Kivanc,
I see exactly one year ago (almost to the minute) you posted this solution.
I am having exactly the same issue as you had. I also assumed the problem lay in ECC with unit of measure having to be defined at that same level.
I have asked our SD team about this and they are not maintaining units of measure at higher levels of the hierarchy, only on the product itself.
Our units of measure will be EA, TO, KG
So how do I get around this? I don't completely understand what you have explained in your solution.
Regards,
Kendal

Unit o measure issue for blanket orders

Similar Messages

Maybe you are looking for