Unknown host names ( rv220w )

I just bought a Cisco rv220w and noticed that 90% of the connected devices read as Unknown. I moved from a Netgear WNDR4500 where almost 90% of the items were labeled with their proper names. Those names which were left as Unknown, I was able to set their names appropriately.
This new router was quite a bit more expensive than the Netgear, are there any similar options to setting the connected device names or is there a setting I am missing to be able to properly identify the connected devices?
Hopefully, I am missing something small but I have spent 10+ hours trying to figure this our to no avail.
Thanks for any help.

Richard,
I have used the RV220W at home since it was released. I have noticed the same thing, on mine the only host names that I see are computers and network attached storage devices. I have several IP cameras, printers, etc. and they all show as "Unknown". This has been the same on every firmware release. I have not found any settings in the router or LAN devices that can change this, it appears to be a limitation of the router.
I will say that I have found this limitation easy to overlook as the RV220W is stellar in every other way that is important to me, especially with the latest firmware installed. It was expensive for a home router but it has served me well. It also has a limited lifetime warranty which is not easy to find in a consumer model.
- Marty

Similar Messages

Catalog backup getting Error resolving host - unknown host name in dataset

I have new install of OSB version 10.3.0.1.0 [Admin, Mediaserver, Client] installed on the same OEL server. My Catalog Backup jobs end up with error " unknown host name in dataset" and the job detail shows only "Error resolving host - unknown host name in dataset" while I can ping the admin host with obtool pingh command. The standard auto created Catalog backup dataset looks like this:
Dataset: OSB-CATALOG-DS
# Dataset for backing up the OSB Catalog on this administrative host
include catalog
I am able to create a separate dataset with the hostname defined and able to backup filesystems on the same host, np . Only the catalog backup from system generated dataset and schedule doesn't run. I appreciate any help or tip to make this catalog backup work. Thanks.

This problem is fixed by just restarting observiced on admin server.

Hostname change - db_connect failed, unknown host name, Return Code 000256

check SAP Note 403708 - Changing an IP address and make sure there are no space, special characters in the hostname.

Hi Simon
Run Config Tool and change DB connection settings there in Secure Store. Update admin/host & jdbc/Url properties wherever you find the old host name. Then save the changes and restart the cluster.
BR, Sergei

Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

Hello,
Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
Unknown Host
Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
Can anyone help me please, and the same website is accessible with my phone.
Help me please. :(
Regards
-

Try http://www.transitbux.com/
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Can I send DHCP host name to my ISP from RV220W?

My ISP waits a definite host name from me to return my white IP address via DHCP. Can I set this parameter in RV220W router? I don't find such parameter in IPv4 WAN configuration page.

After firmware update to 1.0.3.5 I can set up router name but provider support answer that router doesn't send its name to provider during DHCP handshake. Is that right?

Host name is unknown

Hi!
I am trying to create RFC connection from XI to SRM system, but when I specify system host name I get an error that host name is unknown.
Could you please help me to solve this issue?
Thanks and Regards,
Siarhei

Hi Siarhei Tsikhan...
You may try this transaction to know the status
Use Tcode SM49 in the subsequent screen click on PING and then in next screen enter URL of the system and press F8
this will give you the status of the system in terms of how many packet lost or successful delivery
by this you may get exact status of server\
regards
sandeep
If helpful kindly reward points

Terminal Host Name unknown####

Whenever i log into my termianl i noticed that i see that my hostname says unkown040ccedf8e88: ny name, is this normal? because i know that my friends MPA's have a different host name, and when i type in "hostname" on terminal, it gives me that unkown###

You can change the hostname in the System Preferences of Lion (client):
Go to:
- System Preferences -> Sharing
- See "computer name" at the top, enter something other than what's there.
- If you click "Edit" underneath, you should get something like hostname.domain. I usually see: computername.local
When you use hostname, you should get the value given when you click "Edit", e.g computername.local
It could be that what's currently there is too long and/or contains an illegal character. While a bit old and refers to a specific case of binding to Active Directory, according to this:
Use computer names and passwords that are less than 16 characters in length, and which only contain alphanumeric (A–Z, a–z), numbers (0–9), - (dash) and/or _ (underscore) characters when binding with Directory Utility
I would try a new computer name in accordance with that those rules to see if it corrects the problem: alphanumeric (A–Z, a–z), numbers (0–9), - (dash) and/or _ (underscore)
I don't use spaces either.

Cannot resolve host names on local network

It is a local network with router, few Windows computers with shared drives and one Mac.
Windows shares appear correctly in SHARED and can be used without any problems, like iTunes and iPhoto libraries are on those shared drives and work properly, even if ip address of those computers would change.
BUT - if I am trying to use VNC and connect to hostname:port, it says that server is not specified. If I try to ping hostname it says Unknown host.
At the same time, similar ping from Windows computer work without any problems.
It could be possible that router does not support something standard and communicates with Windows using something windows-specific, but what confuses me is that I can see computer names resolved in the finder already! Also, as I said iTunes and iPhoto can work with shared files on dynamic ip's which would be not possible if host names would be not resolved.
Thanks.

Domain Name Resolution for local IP addresses require a Local DNS server running on your network.
Bonjour names will resolve without a Local DNS server. So this is why iTunes and iPhoto works as they use bonjour technology.
A bonjour name ends in .local so in your macs sharing preferences you give the mac a name of imac its bonjour address is imac.local
Other than that you are best giving your devices fixed IP address and adding there hostnames to your hosts file.
the contents of /etc/hosts on your mac would look like
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
so at the above that you could add for example
192.168.1.5 mypc
192.168.1.6 myprinter
Then you could ping 192.168.1.5 by
ping mypc
So would have to add these entries to each hosts file on every computer on your lan.
Or you could setup a local dns server and give each computer on your LAN a fully qualified domain name.

Changing the Host Name in Lite Database

Hi,
I am using oracle 10g Database release 2 and oracle 10g Lite Database Release 3
OS is Windows 2003 Server
I changed the host name
“Old Name Oracle10g New Name OracleTENR1”
Also change the host name in Listener.ora and tnsname.ora after that i restart the machine
I checked the Database status (it is in OPEN STATE only )
And then I start the mobile server it's not working ….
How to change the host name in the oracle 10g Lite Database ?
Please Advice
Thank U
SHAN

hi,
Thanks Fot the Reply ......
I have changed the hostname in webtogo.ora
Mobile Server is Working...
But the Problem is "with the Browser http://localhost/webtogo it shows this error message in the Screen"
500 Internal Server Error
java.lang.NullPointerException at oracle.lite.web.util.TaggedHtml.parse(Unknown Source) at oracle.lite.web.util.TaggedHtml.init(Unknown Source) at oracle.lite.web.WebtogoLogonPage.init(Unknown Source) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:119) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
Please Advice.....
thank U
SHAN

"Logon failure: unknown user name or bad password" even with correct Credentials

I have networked PCs before many times successfully, so this is not my first time trying to network PCs in a home environment. Though I’m wondering if Windows 8.1 is part of the problem.
I would have thought that for sure, until one of the new laptops running W8.1 would not connect to any of the other three PCs/Laptops running W8.1. Yet these other three W8.1 PCs/Laptops CAN connect to this laptop. Then it gets a little more interesting:
this same laptop that couldn’t connect to those three W8.1 PCs/Laptops, CAN connect to a Windows 7 desktop, and a XP Laptop, and those two can also connect back to it without issue. It’s almost like my network is divided in half, and only half can talk to
each other. But then when I thought it couldn’t get any more interesting, I realized the first three W8.1 PCs/Laptops can talk to the others, it’s just that the others (W8.1 Laptop, W7 Desktop, XP Laptop) can’t talk back to them without getting the error,
"Logon failure: unknown user name or bad password” even though the username and password are 100% correct.
I don’t fully understand this error, because on the surface, it’s just WRONG!
My username and password are correct, but it appears something somewhere is interfering or hijacking the authentication process. Three of the computers (laptops) are brand new, just purchased last week and setup this week. The HostPC is also fairly new,
just purchased last month.
I am not using a HomeGroup, and have removed all computers that were part of a HomeGroup. I have enabled file sharing and network discovery and enabled “Use user accounts and passwords to connect to other computers” on all PCs.
I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it. It is a Sagemcom Model: F@ST 1704N.
All computers are connected wirelessly. Time is correct on all PCs. I cannot use Group Policy, since they're all Standard or Home edition. DHCP is enabled and all computers are on the same subnet, using the 192.168.254.x range of ip addresses.
The six computers are as follows: (I figured this may make is easier to visualize the layout)
HostPC: HP Desktop W8.1
PC Name: DrsBlend
U/N: DrsBlend p/w: 123456 (not showing my real password)
PC1: HP Laptop W8.1
PC Name: DrsBlend-1
U/N: DrsBlend    P/W: 123456
PC2: HP Laptop W8.1
PC Name: DrsBlend-2
U/N: DrsBlend    P/W: 123456
PC3: HP Laptop W8.1
PC Name: DrsBlend-3
U/N: DrsBlend    P/W: 123456
PC4: HP Desktop W7 SP1
PC Name: DrsBlend-4
U/N: DrsBlend    P/W: 123456
PC5: Dell Laptop XP SP3
PC Name: DrsBlend-5
U/N: DrsBlend    P/W: 123456
Every PC stated above has the same user name and password and is logged-in with the username, DrsBlend and the password 123456. The "Logon failure: unknown user name or bad password” happens when trying to access HostPC, PC1, or PC2 from PC3, PC4, or
PC5.
The HostPC can see and connect to all the PCs, but only PC1 and PC2 can talk back or access the HostPC.
It’s like the HostPC and PC1, and PC2 are in their own little clique, and can talk back and forth to each other. Those three PCs can also talk to PC3, PC4, and PC5 as well, but PC3, PC4, and PC5 cannot talk back to them (HostPC, PC1, PC2).
Profile corruption? I would have entertained that thought, but the fact the first three PCs can access and talk to one another kind of defeats that idea, and the fact the PCs were just recently setup.
Firewall? Disabled, and disabled TrendMicro with no change. With them on/off, the first three PCs can still talk to each other and the rest of the PCs.
Anyone have any additional suggestions?

Hi，
How did you connect to other PCs? Do you use RDP to connect to other PCs? If so, check the version of the RDP, as I know, some low version RDP can't connect to higher Windows like 8.1.
And could you please tell us the detailed information about how the six PCs connect to the home network?
Can PC1, PC2, PC3 ping back to host PC, PC1 and PC2?
You can also run command " rundll32.exe keymgr.dll, KRShowKeyMgr " view the credentials stored in your PC,check whether this issue is related with some old credentials stored in your system.
Yolanda Zhu
TechNet Community Support

BusinessObjects Enterprise HOST NAME PROBLEMS

As we can find in other posts, we know that BO has problems with underscore in the host name.
I read in some posts that the problem can be solved by writing the IP address instead of the host name when we use Infoview or whatever we need.
I've done two BO enterprise installations in two different Vitual Machines (made with Virtual PC).
I know that SAP guarantees that BO works fine only on VMware platform with the host name without underscores.
The host on the first Virtual Machine was named correctly, but after the installation I changed it inserting an underscore; after this the Infoview login interface didn't work. So I tried to write the IP address and It worked properly.
Trying to use Designer and Translation Manager I had only to use the IP address instead of the current host name.
The host on the second Virtual Machine was named with an underscore, and after the installation I launched the Infoview login interface that didn't work. Again I tried to write the IP address and It worked properly, but in this case I couldn't launch the Designer and I couldn't import the universe from cms with the Translation Manager!!!
I got this exception opening the Designer:
1 processor P Family 6 Model 15 Stepping 6
Windows 2000 Server (Terminal Server) v5.2 build 3790 (S)
Physical Total/Avail: 1.546.728 Kb / 878.328 Kb
Temp directory C:\DOCUME1\ADMINI1\IMPOST~1\Temp\ (1 Kb available)
'Unknown' video card
   808 x 688 in true color
Unhandled Exception
Code: e06d7363
Description unavailable
Call stack:
Module at   0x7c800000: C:\WINDOWS\system32\kernel32.dll v 5.2.3790.3959 <i>
    address: 0x7c80bee7
Module at   0x7c340000: C:\WINDOWS\system32\MSVCR71.dll v 7.10.3052.4 <i>
    address: 0x7c359aed
Module at   0x49920000: C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cpi18n.dll v 12.0.0.683 <i>
    address: 0x4994c1e3
Module at   0x00f20000: C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\xerces-c_2_7.dll v 2.7.0.0 <i>
    address: 0x01007261
    address: 0x01c281f0
    address: 0x01006e65
Application:
3980 "
current thread 0x814
started: martedu00EC 21 luglio 2009 at 10.06
ends:    martedu00EC 21 luglio 2009 at 10.06
User mode: 330 ms   Kernel mode: 450 ms
Loaded modules:
    0x00320000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\io-vc-mt.dll      v 0.0.0.0
    0x00330000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\thread-vc-mt.dll      v 0.0.0.0
    0x00350000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cpcoll.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x00360000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\TraceLog.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x003A0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dlg1.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x003B0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dlgdll.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x003C0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\boDeploy.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x003F0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\security-vc-mt.dll      v 0.0.0.0
    0x00400000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\designer.exe      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x005A0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\btuc320vc71.dll      v 3.2.0.0      [Inglese (Stati Uniti)]
    0x006D0000     C:\WINDOWS\system32\MFC71U.DLL      v 7.10.3077.0      [Inglese (Stati Uniti)]
    0x007E0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\tools.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x00960000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\zlib.dll      v 0.0.0.0
    0x00980000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cxlibw-4-0.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x00AD0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\libOCAHelperw-4-0.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x00DD0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\libxml2.dll      v 0.0.0.0
    0x00EC0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cpxml.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x00EE0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\network-vc-mt.dll      v 0.0.0.0
    0x00F00000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\time-vc-mt.dll      v 0.0.0.0
    0x00F20000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\xerces-c_2_7.dll      v 2.7.0.0      [Inglese (Stati Uniti)]
    0x010E0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\wstkCommon.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x01140000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\bo_storage.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x01170000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\unvtools.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x011E0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cpqry.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x01210000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\streaming-vc-mt.dll      v 0.0.0.0
    0x01240000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\pdflib.dll      v 7.0.1.1      [Inglese (Stati Uniti)]
    0x01F00000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\BOCP_1252.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x10000000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\file-vc-mt.dll      v 0.0.0.0
    0x12000000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\xerces-c_2_1_0.dll      v 2.1.0.0      [Inglese (Stati Uniti)]
    0x49650000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\repo_proxy.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x497D0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cplib.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x49920000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cpi18n.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x499E0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\msgsrv.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x49AA0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\boconfig.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x49C50000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\i18n.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x4A800000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\icuuc30.dll      v 3.0.0.0      [Lingua di sistema]
    0x4A900000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\icuin30.dll      v 3.0.0.0      [Lingua di sistema]
    0x4AD00000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\icudt30.dll      v 3.0.0.1      [Lingua di sistema]
    0x53000000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\fssl-1-2-1-3.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x53210000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cs_helpers.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x53430000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cube.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x53900000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cs_tools.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x53B10000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\kagtux.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x53F60000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\cnxsrv.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x54150000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\desengine.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x541C0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ksqldg.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x542C0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\sessmgr.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x544F0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\uitools.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x546C0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\rptdisp.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x54740000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\krptdlg.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x547E0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\BOFCEngine.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x54AB0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\category.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x54D40000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\RepAttr.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x54D70000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\bofcui.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x55290000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\kquery.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x55640000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\BOFCDialogs.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x556E0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\vartools.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x56970000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FCRepoProxy.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x597C0000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\libOCASecurityw-3-0.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x5D360000     C:\WINDOWS\system32\MFC71ITA.DLL      v 7.10.3077.0      [Italiano (Italia)]
    0x63000000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\etc-1-0-12-5.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x64000000     C:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ebus-3-3-2-6.dll      v 12.0.0.683      [Inglese (Stati Uniti)]
    0x6D7C0000     C:\WINDOWS\system32\dbghelp.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x71950000     C:\WINDOWS\System32\mswsock.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x719E0000     C:\WINDOWS\system32\WSOCK32.dll      v 5.2.3790.0      [Italiano (Italia)]
    0x71A20000     C:\WINDOWS\system32\WS2HELP.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x71A30000     C:\WINDOWS\system32\WS2_32.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x72EA0000     C:\WINDOWS\system32\WINSPOOL.DRV      v 5.2.3790.3959      [Italiano (Italia)]
    0x743D0000     C:\WINDOWS\system32\MSCTF.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x744C0000     C:\WINDOWS\system32\msi.dll      v 3.1.4000.3959      [Lingua di sistema]
    0x76080000     C:\WINDOWS\system32\MSASN1.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x760A0000     C:\WINDOWS\system32\CRYPT32.dll      v 5.131.3790.3959      [Italiano (Italia)]
    0x76170000     C:\WINDOWS\system32\MSIMG32.dll      v 5.2.3790.0      [Inglese (Stati Uniti)]
    0x761A0000     C:\WINDOWS\system32\comdlg32.dll      v 6.0.3790.3959      [Italiano (Italia)]
    0x76670000     C:\WINDOWS\system32\hlink.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x76DC0000     C:\WINDOWS\system32\DNSAPI.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x76E00000     C:\WINDOWS\system32\WLDAP32.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x76E40000     C:\WINDOWS\system32\Secur32.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x76E60000     C:\WINDOWS\System32\winrnr.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x76E70000     C:\WINDOWS\system32\rasadhlp.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x77340000     C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.3790.3959_x-ww_D8713E55\comctl32.dll      v 6.0.3790.3959      [Inglese (Stati Uniti)]
    0x774F0000     C:\WINDOWS\system32\ole32.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x779B0000     C:\WINDOWS\system32\WININET.dll      v 6.0.3790.3959      [Italiano (Italia)]
    0x77A60000     C:\WINDOWS\system32\urlmon.dll      v 6.0.3790.3959      [Italiano (Italia)]
    0x77B60000     C:\WINDOWS\system32\VERSION.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x77B70000     C:\WINDOWS\system32\msvcrt.dll      v 7.0.3790.3959      [Inglese (Stati Uniti)]
    0x77BD0000     C:\WINDOWS\system32\GDI32.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x77C20000     C:\WINDOWS\system32\RPCRT4.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x77CD0000     C:\WINDOWS\system32\OLEAUT32.dll      v 5.2.3790.3959      [Inglese (Stati Uniti)]
    0x77D70000     C:\WINDOWS\system32\ADVAPI32.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x77E20000     C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_5.82.3790.3959_x-ww_78FCF8D0\COMCTL32.dll      v 5.82.3790.3959      [Inglese (Stati Uniti)]
    0x77EC0000     C:\WINDOWS\system32\SHLWAPI.dll      v 6.0.3790.3959      [Italiano (Italia)]
    0x77F30000     C:\WINDOWS\system32\USER32.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x7C140000     C:\WINDOWS\system32\MFC71.DLL      v 7.10.3077.0      [Inglese (Stati Uniti)]
    0x7C340000     C:\WINDOWS\system32\MSVCR71.dll      v 7.10.3052.4      [Inglese (Stati Uniti)]
    0x7C3A0000     C:\WINDOWS\system32\MSVCP71.dll      v 7.10.3077.0      [Inglese (Stati Uniti)]
    0x7C800000     C:\WINDOWS\system32\kernel32.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x7C910000     C:\WINDOWS\system32\ntdll.dll      v 5.2.3790.3959      [Italiano (Italia)]
    0x7C9E0000     C:\WINDOWS\system32\SHELL32.dll      v 6.0.3790.3959      [Italiano (Italia)]
I got this exception importing the universe from cms in the Translation Manager:
[repo_proxy 37] UniverseFacade::importUniverse - (Helpers::InfoStore::ObjectFileHandle::extractContent) Local file copy has failed Errore del File Repository Server: La directory C:\Documents and Settings\Administrator\Dati applicazioni\Business Objects\Business Objects 12.0\Universes\@l3_dwhsrv_6400\Folder 95/Universes\ richiesta u00E8 inesistente.(hr=#0x80042a4a)
I'd like to know if:
1) Is this a problem because of the Virtual PC virtual machine?
2) Is this a problem because of the BO problem with underscore in the host name?
and
3) How can I resolve this problem without changing the host name?
Thank you for your attention,
Giorgio
Edited by: Agliano Giorgio on Jul 21, 2009 12:28 PM

Hi Agliano,
changing the Hostname of a Server after BO is installed is a bad idea ! The WAR files for your Tomcat are in some sort "hardcoded".
I would suggest re- deploying your war files on the Tomcat would fix this issue. Check SAP Note - 1308027 for assistance.
Regards
-Seb.

Email host name for mailbean

Hi, I have a problem about finding my own email host name when I am trying to send an email within JSP. I have tried many names such as: "mail.gmail.com"," yahoo.com", and the one included in the code blow. I think I have a misunderstanding about this host name, could anyone explain for me please? Thanks a lot.
Blow is my code
* Mail.java
* Created on 2006年8月14日, 下午2:59
package myclass;
import java.io.*;
import java.util.*;
import javax.mail.*;
import javax.mail.event.*;
import javax.mail.internet.*;
* @author weiming514
public final class MailBean extends Object implements Serializable{
private String to = null;
private String from = null;
private String subject = null;
private String message = null;
public static Properties props = null;
public static Session session = null;
static{
/** Setting Properties for STMP host **/
props = System.getProperties();
props.put("mail.smtp.host", "hostname");
session = Session.getDefaultInstance(props, null);
     /* Setter Methods */
     public void setTo(String to) {
          this.to = to;
     public void setFrom(String from) {
          this.from = from;
     public void setSubject(String subject) {
          this.subject = subject;
     public void setMessage(String message) {
          this.message = message;
/* Sends Email */
public void sendMail() throws Exception{
if(!this.everythingIsSet())
throw new Exception("Could not send email.");
try{
MimeMessage message = new MimeMessage(session);
message.setRecipient(Message.RecipientType.TO, new InternetAddress(this.to));
message.setFrom(new InternetAddress(this.from));
message.setSubject(this.subject);
message.setText(this.message);
Transport.send(message);
catch(MessagingException e){
throw new Exception(e.getMessage());
/* Checks whether all propertises have been set or not */
     private boolean everythingIsSet() {
          if((this.to == null) || (this.from == null) ||
          (this.subject == null) || (this.message == null))
               return false;
          if((this.to.indexOf("@") == -1) ||
               (this.to.indexOf(".") == -1))
               return false;
          if((this.from.indexOf("@") == -1) ||
               (this.from.indexOf(".") == -1))
               return false;
          return true;
Error:
unknown smtp host: hostname

and the one included in the code blow.You have written "hostname" in the code below. Since "hostname" is certainly NOT a valid SMTP host name,
that's why you get the error: unknown smtp host: hostname.
What did you expect? You must provide a valid SMTP host name, NOT "hostname". You see the difference right?
Try with your ISP (Internet Service Provider) SMTP host name.
It should be something like: stmp.somename.com.
That's the one you must set in your email client (Outlook, Thunderbird, Eudora, Lotus Notes, whatever) to send your emails.
Next time please paste your code between [code] tags with the help of the code button just above the edit message area.
Regards

WRT150N host name lookup problem

When I try to access a computer on my LAN using the host name I get a unknown host message. When I use the computer's dynamically obtained ip address it works fine.
Does anyone know if there is a way to make a WRT150N router resolve the host name. My old router used to doit, but i can figure out how to make the WRT150N do it.

Let me know the Firmware you are using on WRT150N?
Try uploding the latest firmware on the website 1.01.9 ....
Try this link ....

Unknown user name or bad password issue while creating AD accounts

Hi All,
While creating accounts on AD through IdM, I am getting below error. Sometimes I don't see this error while sometimes I do. What could be the actual reason ?
com.waveset.util.WavesetException: Error opening object 'LDAP://cn=ut9778ug,ou=Employee USA,ou=Users,ou=CorpHQ,dc=corpz,dc=utcz,dc=com': ADsOpenObject(): 0X8007052E: , , Logon failure: unknown user name or bad password.
Please help me out.
Thanks,

Hi,
I just faced the same problem while provisionning account on AD through Sun Identity Manager Gateway. (I'm in Oracle Waveset 8 patch 6)
When I test configuration on the configuration page of my AD resource, everything was ok, but when i tried to create / update account on AD, i had the same error. (when i forced a bad password for example, the test configuration was in error, so i know that was ok)
I resolved the problem using IP address in "LDAP Server Name" instead of url or host name. I don't understand because 'ping' on url and test configuration on resource were ok.
I hope it will be usefull for you
Nicolas

Change my Host Name in Solais 10

Please, when I run smc(Solaris Management Console) I can see in System Information, that my Host Name is unknown. How can I change that?

It's strange that you don't have etc/nodename, it must be in etc/. May be you'll try to create it? Besides, I think this article can help you:
Setting Up a Solaris DHCP Client
One of the problems that can arise when trying to use a Solaris box as a DHCP
client is that by default, the server is expected to supply a hostname, in
addition to all the other stuff (like IP address, DNS servers, etc.). Most cable
modems and home routers don't supply a (usable) hostname, so it gets set to "unknown".
This page describes how to get around that. (Where this page says "cable modem",
"DSL modem" can be substituted.)
This page assumes that le0 is the interface you using for your DHCP connection.
Substitute hme0 or whatever interface you're actually using in the examples
below.
Setting up DHCP
There are two ways of using DHCP:
DHCP has limited control
DHCP has full control
The first case may be where you want to use your own /etc/resolv.conf and so on,
with a minimum of hassle.
The second case would be the normal situation, especially if your cable modem
provider has a habit of changing DNS name server IP addresses on you (like mine
does!), so I'll concentrate on that here. I have a script to automate the first
method, should you want to use it. You'll need to change the DEFAULT_ADDR and
INTERFACE variables as required.
The first thing to do is to create an empty /etc/hostname.le0, like this:
/etc/hostname.le0Creating this file ensures that the interface gets plumbed, ready for the DHCP
software to do its stuff.
Next, you create /etc/dhcp.le0. This file can be empty if you want to accept the
defaults, but may also contain one or both of these directives:
wait time, and
primary
By default, ifconfig will wait 30 seconds for the DHCP server to respond (after
which time, the boot will continue, while the interface gets configured in the
background). Specifying the wait directive tells ifconfig not to return until
the DHCP has responded. time can be set to the special value of forever, with
obvious meaning. I use a time value of 300, which seems to be long enough for my
cable provider.
The primary directive indicates to ifconfig that the current interface is the
primary one, if you have more than one interface under DHCP control. If you only
have one interface under DHCP control, then it is automatically the primary one,
so primary is redundant (although it's permissible).
With these files in place, subsequent reboots will place le0 under DHCP control:
you're ready to go!
Unknown hostname
Actually, there's one snag: most (if not all) cable modem DHCP servers don't
provide you with a hostname (even if they did, odds are it won't be one you want
anyway!). This wouldn't be a problem, except that the boot scripts (/etc/init.d/rootusr
in particular) try to be clever, and set your hostname to "unknown" in this case,
which is not at all useful!
The trick is to change your hostname back to the right one, preferably without
changing any of the supplied start-up scripts, which are liable to be being
stomped on when you upgrade or install a patch. You've also got to do it early
enough in the boot process, so that rpcbind, sendmail and friends don't get
confused by using the wrong hostname. To solve this problem, put this little
script in to /etc/init.d/set_hostname, with a symbolic link to it from /etc/rc2.d/S70set_hostname.
Starting with Solaris 10, the preceding paragraph can be ignored. Instead, just
make sure that the hostname you want to use is in /etc/nodename; the contents of
that file will then be used to set the hostname. (Note that it is essential that
the hostname you put into /etc/nodename is terminated with a carriage return.
Breakage will happen if this is not the case.) Also, from Solaris 8 it is
possible to tell the DHCP software not to request a hostname from the DHCP
server. To do this, remove the token 12 from the PARAM_REQUEST_LIST line in /etc/default/dhcpagent.
(/etc/default/dhcpagent describes what the default tokens are; 12 is the
hostname, 3 is the default router, 6 is the DNS server, and so on.)
With these modifications in place, reboot, and you'll be using your cable modem
in no time!
If you've got more than one machine, and you want to access the Internet from
all of them, you might also find my Solaris NAT page useful.
If this page has been useful to you, please consider buying a copy of my book,
Solaris Systems Programming.
Send any questions or comments to: [email protected]
And this is the script:
#!/sbin/sh
# Name: set_hostname
# SCCS Id: @(#)set_hostname 1.2 07/26/04
# Description: This file is a script for re-setting your hostname to the
# right value if you use DHCP (which has a habit of setting
# your hostname to "unknown" if you use a cable modem).
# Copyright Љ 2000-2004 by Rich Teer. All rights reserved.
HOSTNAME=`cat /etc/nodename`
echo "Setting hostname to $HOSTNAME... \c"
uname -S $HOSTNAME
echo "Done."
It's another variant, more complex:
#!/usr/bin/sh
# set_hostname
# Setting DHCP hostname when not provided from DHCP-server.
# Make sure you have a "clean" copy of /etc/hosts (fx. /etc/hosts.orig)
# As this script will clean up and set the hostname in /etc/hosts.
# The script can be run in hand, or as a startup script in:
# Solaris 8/9: /etc/init.d; /etc/rcX.d
# Programmed by: Yngve Berthelsen
# Date: 20050216
# E-Mail: [email protected]
# Last updated: 20050216
# History:
### Variables used in script
NODENAME="/etc/nodename"
HOSTALIAS=`cat /etc/nodename|nawk ' BEGIN { FS="." }; { print $1 }'`
HOSTFILE="/etc/hosts"
ORGHOST="/etc/hosts.orig"
HOSTNAME=`/usr/bin/hostname`
NIC="hme0" # Change hme0 to the DHCP interface NIC
DHCPNIC="/etc/dhcp.$NIC"
IPADDRESS=`ifconfig $NIC|grep inet|nawk '{ print $2 }'`
### Functions to call
SetHostname()
echo "Setting DHCP Hostname: $NODENAME"
/usr/bin/uname -S $NODENAME
print "$IPADDRESS\t$NODENAME\t$HOSTALIAS" >> $HOSTFILE
/usr/bin/hostname $NODENAME
return
# main
case "$1" in
'start')
if [ -f $DHCPNIC ]
then
if [[ $HOSTNAME == "Unknown" ]]
then
SetHostname
elif [[ $HOSTNAME == "unknown" ]]
then
SetHostname
fi
fi
'stop')
if [ -f $DHCPNIC ]
then
cp -frp $ORGHOST $HOSTFILE
fi
echo "Usage: $0 { start |stop }"
exit 1
esac
exit 0
### This script is submitted to BigAdmin by a user of the BigAdmin community.
### Sun Microsystems, Inc. is not responsible for the
### contents or the code enclosed.
### Copyright 2007 Sun Microsystems, Inc. ALL RIGHTS RESERVED
### Use of this software is authorized pursuant to the
### terms of the license found at
### http://www.sun.com/bigadmin/common/berkeley_license.html
I use the first, "short" script, it works.

Unknown host names ( rv220w )

Similar Messages

Maybe you are looking for