Unknown Object Classes

Hi All,
I am new to DS.I am getting this below error when importing LDIF file to newly created DS instance.It seems that some custom defined objectClasses is missing.
+[21/May/2009:09:40:41 +0800] - ERROR<5894> - Schema - conn=-1 op=-1 msgId=-1 - User error: Entry "uid=1000462550,ou=rapids,o=PBG, dc=apac,dc=nsroot,dc=net" has unknown object class "custominetOrgPerson"+

Please make sure you migrate your schema as well beforehand. The schema is in the <instance>/config/schema directory. 99user.ldif is what has all customisations. Copy that over to the new instance and see how you go. If not, search the old instance for your missing objectclass and copy that over.
OR
If both instances are online already, you could do an online initialization which replica schema and data.

Similar Messages

Object class name does not exist in IDM

Hi Team
We are process of Integrating GRC 10.1 to Enterprise Portal.Followed accordingly as per the SAP Note No. 1977781.
While running the Schema Job, we get a message Schema Imported Suxcessfully. While running the Job : GRAC_REPOSITORY_SYNC_JOB, the job
shows successful, but a Warning Message : User Adaptor Empty in SLG1 T.code.
I have checked the Path suffix,connectors,data source and all are maintained but no sure about this warning message.
Secondly,I tried for test creation of user on Portal via GRC 10.1.I am getting below error
"Object class name does not exist in IDM" Please see log below
Request gets closed stating Auto Provisioning failed.Please advice if someone has faced same issue and the steps taken to rectify it.
Thanks
Nitesh

Hi Nitesh,
We worked on this issue for quiet sometime with SAP to get this finally fixed You can check all below mentioned notes.
First Check:
Please check the Note: 1915763 - Error Provisioning from GRC 10 to SAP Portal while adding or removing a role in Change Account request type.
This Note says that if your LDAP set as data source is read-only in Portal, then you need to change it to Modifiable in order to allow create or change user belonging to LDAP.
We have set the UME correctly and no longer read-only. But our access requests still used to fail with the following messages.
"Object class name does not exist in IDM".
Second Check:
Kindly ensure the field mapping for portal is done in IMG settings properly.
If it is fine please check below note 2033714 - AC10.0: error in SGL1 "Object class name does not exist in IDM".
This note is only to check if you have made any mistake with your portal mapping and doesn't address the correct issue.
Third Check:
Finally after implementing SAP note 1941250 - UAM: Truncated parameters provisioned on changing users from Access Request
our issue got fixed.
Regards,
Madhu.

How to create custom attributes & object classes through ldif files in OID

Hi,
I have to create 4 attributes and one object class(custom) in OID. I want to creae these attributes and object class through LDIF file.
I tried creating an attribute through this command
ldapadd -p 389 -h localhost -D cn=orcladmin -w password -f D:/newattr.ldif
this ldif file contains inf. for creating a new attributes:
dn: cn=subschemasubentry
changetype: add
add: attributetypes
attributetypes: ( 1.2.3.4.5.6.10 NAME "xsUserType_new" DESC "User Type Definition" EQUALITY caseIgnoreMatch
SYNTAX "1.3.6.1.4.1.1466.115.121.1.15" )
I am getting error: Object class violation
Failed to find add in mandatory or optional attribute list.
Please help to find where I am going wrong...
Thanks.

Hi Ajay,
Thank you for the help. Now i am able to create both attributes and object classes in OID through Ldif files.
I was getting constraint violation error because (I think) I was not giving proper naming convection for attributes and object classes. For OID, there are certain Ldap naming conventions. They are as follows:
# X below is the enterprise number assigned by IANA
1.3.6.1.4.1.X.1 - assign to SNMP objects
1.3.6.1.4.1.X.2 - assign to LDAP objects
1.3.6.1.4.1.X.2.1 - assign to LDAP syntaxes
1.3.6.1.4.1.X.2.2 - assign to LDAP matchingrules
1.3.6.1.4.1.X.2.3 - assign to LDAP attributes
1.3.6.1.4.1.X.2.4 - assign to LDAP objectclasses
1.3.6.1.4.1.X.2.5 - assign to LDAP supported features
1.3.6.1.4.1.X.2.9 - assign to LDAP protocol mechanisms
1.3.6.1.4.1.X.2.10 - assign to LDAP controls
1.3.6.1.4.1.X.2.11 - assign to LDAP extended operations
By using these conventions for attributes and object class, I did got any error and they were created in OID.
Thanks a zillion.
Kalpana.

Error: initialization error: file java\lang\Object.class not found

when the error listed my classpath's its not the same list that is in my Windows XP environment variable list?
I am on 9.0.3
I am assuming I have to set some varible to my new jdk\bin directory. I reinstalled it. I have set it to use jdk 1.4 using the ojvm tool a while back.

Please help!!
I did change the jdev.conf file setting:
SetJavaHome /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home
and I still get this error:
initiallization erro: file java/lang/Object.class not found in classpath
I am usgin Oracle JDeveloper 10g 10.1.2 on a Mac OS X Tiger
Could someone please help?
thanks a bunch!!!

Creation of Disctribution Model view using Distribution using object classe

Hi All ,
Can anybody tell me how to create distribution model through Distribution using object classes option in SALE transaction(Path : SALE - > Modelling and implementing Business processes - > master data Distribution - > Distribution using object classes).What is the difference between normal distribution model creation through BD64 and creating in the above way?
Please help me its urgent.Thanks in advance.
Regards,
Rakesh.

Hi All ,
Can anybody tell me how to create distribution model through Distribution using object classes option in SALE transaction(Path : SALE - > Modelling and implementing Business processes - > master data Distribution - > Distribution using object classes).What is the difference between normal distribution model creation through BD64 and creating in the above way?
Please help me its urgent.Thanks in advance.
Regards,
Rakesh.

How to get the object class field value in CDHDR table for vendor

hi
how to get the object class field value in CDHDR table for vendor

Try KRED/KRED_N as object class in CDHDR for Vendor.

Object Class Invalid when downloading the pricing procedure from ECC to CRM

Hi,
I want to download the pricing procedure for that I have created the ZDNL_CUST_CND which contains only the following tablesT683, T683S, T683T and T683U.
When I check in R3AM1 status is Red.
The following Error have been found in SLG1
     Object class invalid
     Error in inbound data check
Message no. CND_MAP120
Diagnosis
During the receiving inspection, serious errors were found in the consistency of the exchange object.
System Response
Data exchange is terminated
     Data exchange terminated
Message no. CND_MAP122
Diagnosis
Data exchange has been terminated due to serious errors. No exchanged data has been posted in the system.
The following Error has been found in SMQ1
     R3AD_CONDITIONS     STOP
Details of STOP
Set by Host name: litldq; Transaction: ; Report: SAPMSSY1
I have checked the connection, everything is perfect.
What may be the problem?
Thanks

Hi,
Please try to re-generate the adapter object (ZDNL_CUST_CND) services using trx.
SMOGGEN
. After this, try re-running the load.
I assume that your CRM inbound mapping module are correctly coded. If the problem persists, try de-registering the R3AD_CONDITIONS inbound queue using trx.
SMQR
and then debugging the inbound queue from the same trx. after re-starting the load.
Reward if this helps!
Regards,
Sudipta.

Getting error in DB02 after checking Consistency check Unknown objects in A

Dear All,
I have getting error in DB02 after checking Consistency check.
Please find the details.
I have queries.
How to correct the Unknown objects in ABAP Dictionary and Optional index is also we have to create please suggest step by step process.
Missing in R/3 DDIC      1              11
Consistency check of 07.04.2009 10:14:24
-- Objects missing in the database
Primary indexes                  0
Secondary indexes                0
Tables                           0
Views                            0
-- Unknown objects in ABAP Dictionary
|   |-- DB tables                        1
      |-- DB indexes                      11
     |-- DB views                        12
-- DB tables without unique index   1
-- Optional indexes
Too many indexes created         0
-- Indexes not created            145
Regards,

Hi
Check this may help you
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/e4ff3e65b66976e10000000a1553f6/content.htm
Regards
Uday

Reg: Object class stored in CDHDR , CDPOS tables

Hi Guys,
we have released blocked Invoice document using transaction MRBR, it is released. we have developed manually zprogram all the invoices which are released manually. but when execute we were unable to get details manually released documents. Here we observed data is fetching from CDHDR, CDPOS tables. Upon observation the Object class we found after released the invoice is getting saved with object class " BELEG". but in zprogram objcet class checking with " INCOMINGINVOICE".
can you explain the which scenario object class is saved with "BELEG", object class is saved with " INCOMINGINVOICE".
Thanks!
Mahendar Patha.

Hi Steve,
(If I understood your question correctly then) Under the Object Value Column 0350035419 is the Customer number. Also under Table key column 1st three characters are your client i.e. 050 followed by customer number 0350035419.
-ruby

How to use Object Class:orclDbServer in OID

Not sure if i have posted in the correct forum, I am quite new to OID
I am planning to use orclDbServer Object Class, but not sure how to use, i have searched in Google, and Oracle Documentation, there are so little information about this, there are only:
Object Class: orclDbServer
Description: Defines the attributes for database service entries
Attributes: orclNetDescName, orclVersion
Below is the ldif file i created for add one entry with object class orclDBServer:
dn: cn=orclDBServer_test, cn=OracleContext, dc=ldapcdc, dc=lcom
changetype: add
objectclass: top
objectclass: orclDBServer
cn: orclDBServer_test
orclNetDescName: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.182.114.121)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = oh112)))
after i use below command to add this entry:
ldapadd -h localhost -p 389 -D "cn=orcladmin" -w welcome1 -f test_add.ldif
then use ldapsearch to search:
ldapsearch -h localhost -p 389 -b "dc=lcom" "objectclass=orclDBServer"
the result is like below:
cn=orclDBServer_test, cn=OracleContext, dc=ldapcdc, dc=lcom
cn=orclDBServer_test
orclnetdescname=(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.182.114.121)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = oh112)))
objectclass=top
objectclass=orclDBServer
objectclass=orclService
It seems it added a line for me:
objectclass=orclService
Is there anything wrong with my ldif file when i want to use orclDbServer?
Edited by: ening on Jan 5, 2010 9:31 PM

Hi,
if you are having main controller and sub-controller then you may need to use below coding to use application class reference.
*Data declaration
DATA: obj_cntrl        TYPE REF TO cl_bsp_controller2,
         obj_sub_cntrl   TYPE REF TO z_cl_sub_cntl,
         application TYPE REF TO z_cl_application.
*Get the controller
CALL METHOD obj_main_cntrl->get_controller   "obj_main_cntrl is the object of main controller
    EXPORTING
      controller_id       = 'SUB'   "Controller ID
    RECEIVING
      controller_instance = obj_cntrl .
obj_sub_cntrl ?= obj_cntrl .
application ?= obj_sub_cntrl ->application.
or simply use below code in your controller method.
application ?= me->application.
Thnaks,
Chandra

DB02 = Missing Tables and Indexes = Unknown objects in ABAP Dictionary = DB views

Hi SAP Gurus,
on our SAP NetWeaver 7.x BW (based on AIX/Oracle) I find via transaction DB02 (path = Diagnostics => Missing Tables and Indexes) under "Unknown objects in ABAP Dictionary" under DB views a BW object /BI0/.....
When I make a double click on the object, I am getting the popup window "Display not possible for this object":
How can I identify the object and clarify with the BW application expert, if needed, how to resolve this object?
I searched already via RSA1 for the object, but I wasn't able to find anything so far ...
Thanks for your help and ideas.
Best regards
Carlos

Hello Carlos
The database view in question is a temporary database object created during a query execution.
Please read this SAP note 449891 - Temporary database objects in BW 3.x to understand what that view is all about and impact if those views are removed.
The SAP notes 449891 and 1139396 suggests to run the report SAP_DROP_TMPTABLES to drop these temporary objects. Whether the objects are still required or not is a question to be put across to the BW team. If the temporary objects are removed when they are used by a query, then the query will fail.
Have a nice day
RB

Unknown Objects in ABAP Dictionary

Hello Everyone,
I am getting a few objects that come up when running the Missing tables and Indexes command in the DBCOCKPIT. Under Unknown Objects in ABAP Dictionary I have the following objects appear:
sap_tabstats
V_MSSDWDLLS
sap_tabstats_V_newest
sap_tabstats_V_oldest
I cannot find anything referencing how to correct this issue. Can anyone be of any assistance? I would greatly appreciate it. Thanks!

Hi:
for sap_tabstats, sap_tabstats_V_oldest and sap_tabstats_V_newest you can find in note 1027512 :
4. IMPORTANT CHANGES IN DATA COLLECTION AND HISTORY
o Applying SP12 on a SQL Server system will introduce a new method
        for collecting database and table size histories. This new
        methode relies on t-sql objects sap_tabstats,
        sap_tabstats_V_newest, and sap_tabstats_V_oldest. These items
        aren't in the data dictionary and should be ignored in any
        discrepancy reports. They are added to an exception table for
        SP13.
For V_MSSDWDLLS you should read note 1020865. The view can be ignored.
Regards
Clas

Unknown object in ABAP Dictionary

Hello
In st04 in "Missing tables and indexes" are many indexes have reported unknown "Unknown object in ABAP Dictionary".
This is because indexex are created directly in DB. Is there a way to solve this problem?
We have db : oracle 10.2.04 and sap SAP ECC 6.0 (Pkg. lvl. 254).

Hi,
In ST04, If you click Missing tables and indexes then next to "Unknown object in ABAP Dictionary" there is a information button which says as below, kindly go through it which could help you.
" Here objects which were found on the database but which are not defined
in the ABAP Dictionary are displayed. These objects are displayed for
information only, since they generally do not belong to the SAP System.
These objects normally do not cause problems.
The objects are generally created directly with database means. If the
author is unknown, the purpose of the table can sometimes be determined
using the display function. Any data can only be displayed with database
means since the SAP tools for displaying data are based on the
definition in the ABAP Dictionary.
In some cases, such objects were already overlooked by SAP at delivery
or occurred during upgrading. To check this, search in OSS using the
keyword DB02 and the Release level for a corresponding Note.
Customer tables, views and indexes should always be created with the
ABAP Dictionary. This is the only way to ensure that the objects are
recognized by the SAP System and that for example collisions can be
avoided during an upgrade."
Regards,
Sharath

BW - Unknown objects in ABAP Dictionary - DB Tables

Hello gurus,
As a result of the consistency check in DB02 transaction, our BW System is showing a high number of "DB Tables" and "DB Tables withouth unique index" as unknown objects in the ABAP dictionary.
Is there any way to solve these consistency issues detected in DB02?
Thanks
Regards

Hi Dibya,
I checked the SAP note 33814 and it tooke me to the SAP note 449891 - Temporary database objects in BW 3.X
According to the recommendations, I executed the report SAP_UPDATE_DBDIFF, and I got as result 579 secondary indexes missing in the DB from the and still the 5 DB Tables unknown in the ABAP dictionary and 2 DB Tables withouth unique index,
I executed the report SAP_INFOCUBE_INDEXES_REPAIR in order to try to repair the secondary missing indexes that were shwon but withouth getting any results.
Do you have any recommendation to solve this situation? In the original scenario the DB02 transaction wasn't reporting any missing index.
Thanks and regards,

Unknown object in ABAP dictionary- TADIR^SRCDEP

Hi,
I found an entry in unknown object in ABAP dictionary while monitoring the system.
This this the location I found this entry DBACOCKPIT-> Diagnostics-> missing table and indexes-> unknown object in ABAP dictionary.
Could you please help to figure out how to solve this?
Thanks in advance.
Regards,
Pradeep

Hello,
You can ignore the index TADIR^SRCDEP in transaction DB2.
The installation creates the index TADIR^SRCDEP to avoid hanging
situations on the database while executing reports. When the
installation is finished you can delete this index.
Drop the index TADIR^SRCDEP on the database:
    o start SQL Server Management Studio
    o connect to your SQL Server
    o open a query window and execute the following command (replace
       SID by the uppercase system name, sid by the lowercase system
       name):
       drop index [TADIR^SRCDEP] on SID.sid.TADIR
Best regards
Clas

Unknown Object Classes

Similar Messages

Maybe you are looking for