Unlock keychain username and delete not working

I need to delete my keychain, but even when logged in as the admin, the <username> keychain displays as locked in the Keychain Access utility. The menu commands for unlock and delete are opaque grey and won't let me do either. Unless I work around that, I won't be able to do the only thing I can find on the topic:
http://docs.info.apple.com/article.html?artnum=106973
Any ideas? Thanks.
1.8 GHz G5, dual 1.42 GHz G4, 2.16 GHz MacBook Pro   Mac OS X (10.4.7)  

So, it turns out if you use 'mode' or 'group' attributes, you must have them to pause, resume, and delete the task, even if you are referencing them by thier name.  Once I added 'mode' and 'group' it started working.

Similar Messages

  • Aironet 1100 Default Username and Password not working

    I have a Cisco Aironet 1100 series access point (AP1120B) that after resetting to factory defaults the default username and password (Cisco and Cisco) aren't working in the web GUI.  I am able to telnet to the AP's IP and log in with Cisco and Cisco but don't know the ENABLE password. I have tried Cisco and cisco and everything else i could think of with no luck.  any help would be appreciated. 
    I also have a Cisco Aironet AP1242AG that is doing the same thing.

    Hi Rich,
    I assume that you are using the mode button to reset the configurations on these units -- this procedure *should* reset all credentials to Cisco.
    If this is still not working, you can try the following:
    1) Connect console port and power-cycle unit
    2) When IOS starts loading, hit ESC key twice to get to the boot-loader prompt
    3) At the boot-loader prompt show a directory of the flash filesystem (dir  flash:)
    4) Delete or rename the files "config.txt" and "env_vars", then boot  the  system ("delete flash:/config.txt" "delete flash:/env_vars")
    -Patrick Croak
    Wireless TAC

  • AirPort Base Station disk username and password not working

    I got a new AirPort Base Station the other day and everything worked fine until I started to set up the networked disk. On my mac it works fine, it just pops up when I connect to the network ( woot for macs ). On my windows it asks for the username and password. After I enter it it comes up with "Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator." I have tried to log into the disk on 2 other computers running windows xp with the same problem. What is wrong with it and how do I fix it?

    Specifically, I had the typical problem connecting when using Windows Live OneCare, despite allowing AirPort Disk Agent in its firewall pop-up.
    This is the procedure which unlocked access via AirPort Disk Agent:
    Double Click Windows Live OneCare icon in system tray. Or use your own means to get its main window open.
    Click the "Change OneCare Settings" topic listed along the left edge column. This will open a new dialog box.
    Click the "Firewall" tab of this new dialog box.
    Click the "Firewall connection tool" button shown right under the protection level slider. This will open yet another dialog box.
    At the top of the list in this "Set up connections" dialog box will be a checkbox (probably unchecked) next to the words "Network Discovery: Browse your network to find printers, computers and other devices."
    CHECK THAT BOX.
    Close all the dialog boxes using an OK button where available, else the usual [X].
    Left-click the AirPort Disk Agent icon in your system tray. From the menu that pops up, select the disk you were having trouble with. Enter its password (the one you know works from a Mac, if appropriate).
    After a delay, your "My Computer" window should show a new drive. If you have window settings appropriate to this display, the drive should appear under the "Network Drives" category. In my case, it became drive Z:.

  • ILM assistant XDB username and password not working

    Hi All,
    Hi I'm using ILM 1.3 with Oracle 11g on HP.
    I am able to log-in to apex server but not ILM assistant.
    http://dblxamd02.vxindia.veritas.com:8080/apex/apex_admin it works with admin/oracle.
    But im not able to login to http://dblxamd02.vxindia.veritas.com:8080 when it asks for XDB username and password.
    I tried to reset the password using apxxepwd.sql but not luck.
    Did anybody observer this issue ? if so can somebody please reply me ASAP ?
    Thanks in advance.

    There are two wats to install the ILM toolkit:
    1) Directly on the server where your instance is located. In this case you do not need to provide a TNS connection name. Therefore, you would execute the script as follows:
    @ilma_install.sql pune
    2) Remotely from a client. In this case you do need to provide a connection string to your remote database instance. Therefore, you would execute the script as follows:
    @ilma_install.sql pune@11
    in this scenario the connection details are derived from your TNSNAMES.ORA file. If you have multiple Oracle products installed you have multiple copies of this file and it can be difficult to track down which file is being used. To point to a specific TNSNAMES.ORA I normally set three parameters:
    ORACLE_HOME - points to your 11g Client installation directory
    PATH - point this to the Oracle home containing SQLPlus, usually this is ORACLE_HOME/bin
    TNS_ADMIN = ORACLE_HOME/network/admin
    then make sure the TNSNAMES.ORA contains a reference to your identifier "11". You can test the connection by using the TNSPING utility that is part of the 11g client installation. The format for your instance would be:
    TNSPING 11
    this will tell you if you can connect to your instance. If there are any issues check the connection via the Net Configuration Assistant, or you can edit the TNSNAMES.ORA file directly via Notepad.
    Hope this helps
    Keith

  • SSH local database username and password not working

    I have a weird issue. I recently setup an ASA 5510 and had SSH working. To make it easier on my VPN users I then decided I wanted to setup a Windows 2008 Network Policy Server for RADIUS authentication. Ever since I added the RADIUS part to aaa authentication, when I use SSH to connect to the ASA it will not take the local user name and password I have setup. I can however get in using a Domain user name and password. Below is the SSH and AAA configuration. Am I missing something here? The username and password in the ASA is not on the domain and it's like the ASA is not even trying LOCAL when it tries to authenticate. I want it to use the local username and password if possible. I'm kind of new to ASA's..
    On another note, I have never been able to SSH in on the internal interface. I always get a "The remote system refused the connection" error message. I can only use the outside interface.
    Site-ASA# sh run | in ssh
    aaa authentication ssh console SERVER_RADIUS LOCAL
    ssh 0.0.0.0 0.0.0.0 outside
    ssh 0.0.0.0 0.0.0.0 inside
    ssh timeout 60
    ssh version 2
    Site-ASA# sh run | in aaa
    aaa-server SERVER_RADIUS protocol radius
    aaa-server SERVER_RADIUS (inside) host 10.0.0.6
    aaa authentication ssh console SERVER_RADIUS LOCAL
    aaa authentication http console SERVER_RADIUS LOCAL
    Site-ASA#
    If there are any other config that would help I would be more than happy to display them
    Thanks!

    Thanks for the reply. I was just coming in to update this because you are exactly correct. For some reason I kept thinking that if the authentication failed via RADIUS it would use local which is not the case.
    Problem (or no problem) resolved.

  • Email on my Pre - IMAP username and password not working

    I am trying to set up my work email on my new Palm Pre.  I am using the identical settings as I did (successfully) in my Treo 755p.  IMAP server, SSL, etc.  But on the Pre I always get an error message that my username or password are incorrect.  My username is inordinately long (32 characters) and I am wondering if the Pre has a maximum and it's not passing the full username onto the server?  Or maybe something else?  Super frustrating for sure.
    Post relates to: Pre p100eww (Sprint)

    I use IMAP accounts with self-signed certs, which didn't seem to work... so I had to choose unsecured for both my incoming and outgoing email. Can you setup the account if you select unsecured (assuming your server allows unsecured connections)?
    -Travis

  • +shift+ delete and +delete not working with external keyboard...

    Most of the time, when I try to send a file to the trash or empty the trash using the keyloard shortcuts, it will only work if I use my laptop keyboard but not my external apple keyboard hooked up to it. Ocassionally it will work with my external keyboard, but most of the time it wont.
    Does anyone have similar problems to this or know how to fix it?
    Thanks in advance!
    -Isaac
    MacBook   Mac OS X (10.4.7)  

    The only other thing I can think of is that the Finder can sometimes be slow in updating its view of reality. This is a perennial gripe about OSX. So maybe the issue is not the keyboard, but the Finder itself. Are you a fast typist? Try taking 3 deep breaths before using these key combos the next time you try to delete. Maybe that will let the finder catch up.
    I only suggest this because, otherwise, the problem is pretty inexplicable.

  • Upload and Delete not working together

    I have cfm app that is uploading a file from the client
    computer to a server directory successfully. Now i want to delete
    the file on the client computer after verifing upload. i have the
    app verifing upload, but i get an error when trying to delete file.
    the error indicates that syntax is bad, file is not present (which
    it is) or tag is invalid. i have been through the docs and have
    used the "result" attribute per documentation instructions when
    using two cffile tags in the same .cfm page. anyone ever run into
    this one? Solutions?

    Azadi wrote:
    > you can't delete a file on a client's computer!!!
    > just imagine what could happen if you could do that! you
    come to my
    > website, which runs a little cffile behind the scenes on
    pageload, and
    > wipes your whole boot drive clean!!!
    >
    >
    You could not do that well with just cffile. You would also
    need to use
    cfdirectory!
    A small bit of humor to reiterate that YOU CAN NOT DELETE
    FILES FROM THE
    CLIENT! And it would be an incredibly bad idea if you could.

  • Web Gallery Post and Delete Not Working

    Before the latest update things seemed to work as expected. After the update my web gallery doesn't work as expected. From imovie 08 I can't successfully delete movies nor can I successfully load them.
    Anyone else with the same issues. Apple has really dropped the ball on "works out of the box" or in my case, out of the credit card.
    No more money will go to them till they clean up their act.

    got help via e-mail from .mac team

  • The keyboard for my iMac 9, 1 got wet and is not working correctlly. Delete,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I c

    The keyboard for my iMac 9, got wet and is not working correctly. Delete ,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I can't login due to all caps and numbers being symbols. Is there anything I can do?

    Buy a replacement keyboard. They're only $50-65 USD.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

    Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

    Please post a screenshot that shows what you mean. Be careful not to include any private information.
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

  • I cannot get my ipod to unlock, the touch screen does not work and I cant reset it

    I cannot get my ipod to unlock, the touch screen will not work and everytime i try to reset it I take a picture.  any suggestions

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Simple insert, delete and update not working after oracle 10g installation

    Hello,
    I made a new installation of Oracle 10g (10.2.0.1.0) and created a schema . Now i try to insert or update data using simple queries, but unfortunately nothing happens. I tried inserting or updating data even via sqlplus, but unfortunately the same result. Query takes infinite time to end, so i had to manually end it every time... No errors... No warnings... but takes long time... I have given all the required permissions to the schema but the same result. Can somebody help me figure out the problem?
    Tried creating a new table and the insert and delete are working fine... think the problem is with this table... Imported the rows of the table from another online database. I dont understand how this might be a problem.
    Edited by: user13333704 on Mar 15, 2011 1:26 AM

    However how do you generate awr reports and how to find the session wait?TO generate the AWR report
    sql> ?/rdbms/admin/awrrpt
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/autostat.htm#BABDHAGF
    The event column in v$session , in v$active_session_wait will show you the session wait event.What the session was actually waiting for.
    HTH
    Anand

  • Gmail Error: Username and Password Not Accepted?

    Okay, once in a while my e-mail actually works on my I phone but about 90% of the time I get this notification; Cannot Get Mail: Username and password not accepted. Does anyone else have this problem or know how to fix it? Oh yeah, I'm using 1.0.2, gmail, and I'm positive my password and username is right.
    Message was edited by: one11archerave

    I think the problem is solved. Last night I was on my friends computer and I accidentally stored my gmail password. I couldn't figure out how to delete it so I changed my password and then updated my iPhone with the new password. Ever since then I haven't had any problems.

  • Paid subscription, but all products still in trial mode and does not work!

    Hello!
    I paid subscription, but all products still in trial mode and does not work! In Adobe ID manage page i don't see my subscription Screenshot “Adobe ID”
    I received an email confirmation of my payment subscription. Order number 12984126025, my adobe id
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    Why so?! This is very important! My current project at risk, I can lose money

    Please try the below mentioned steps
    1) Sign out of the Creative Cloud app
    2) delete the opm.db file*
    3) update to the latest version of the Creative Cloud app.
    *On Windows 7, the opm.db file is located here:
    C:\Users\YourUserName\AppData\Local\Adobe\OOBE
    *On a Mac, go here:
    [Userdir]:Library:Application Support:Adobe
    ~Deepak

Maybe you are looking for