Unused Tax Group Deletion

Hi
In our existing SAP system, we have five tax groups and we have assigned four tax groups to PA , PSA.
But the last tax group Eg. 5 its not assigned for any PA and PSA. So customer want to delete the unused tax group.
So here, if we delete that, what will be the impact? it may affect any payroll results?
I need help for resolving this issue.
Regards,
Srinivas.S

Hi Mahesh
Thanks for your reply, here i have a doubt, coz now we are doing configuration in the existing live system. So where we can check like wherther this Tax group is preveiously used or not. Coz as of now its not mapped to any PA but i want to know in history level.
Thanks & Regards,
Srinivas.S

Similar Messages

Deleting unused tax codes & payment terms

Hello People,
i need to delete some of the unused tax codes and payment terms ,how am i supposed to achieve this?
Can anyone guide me or give me config path?
Br,
vaibhav.
Rewards for helpful answers.

For deleting the payment terms
pathSPRO-MMPurchasing --Vendor mater --Define terms of payment select the payment terms and delete.
For Tax code: Use FTXP
enter the tax code --go to tax code and delete
G.Ganesh Kumar

Migração: Tax Group in Access Sequences

Boa Tarde experts!
Algum de vocês já passou por um problema parecido?
- Criei um novo Tax Group de MM para PIS e COFINS somente
- Associei as Conditions Tables corretas para o Tax Group
Quando vou fazer a migração desse Tax Group nas sequencias de acesso, obtenho o seguinte erro: "Access Sequence , application TX does not exist" (ICC_CONDTAX014).
Verifiquei a tabela T682 e vi que existe uma entrada na aplicação V com a access sequence branca. Porém, se eu entro na configuração das sequencias de acesso (tanto de SD quanto de MM via J1BTAX) não encontro nenhum registro branco.
Alguém tem alguma dica de como proceder ou já teve algum problema parecido?
Fico no aguardo!
Muito Obrigada!
Luciana

Boa tarde Luciana
Eu estou com o mesmo problema, como você conseguiu fazer a correção ?
Obrigado
Luciano Storti

Professional tax grouping change in mid of the year

Dear All,
In my company, i have to change professional tax grouping in mid of the year for few personnel area.
For the month of april, may and june professional tax deducted as per the gujarat state and from july onwards it should be deduct as per the maharastra state. I have assigned the maharastra state professiona tax grouping to that personnel area in table V_7IN0P_PTX. Now my issue is that when i run the july payroll, system calculate the professional tax carry forward of previous months.
could any one provide the solution for the same.
Thanks,
Jyoti Patel

Hi Jyoti,
Look into the config. of following tables.
V_T7INP1
V_T7INP3
V_T7INP4
What you are getting the professional tax deductions in the july months simulation run.
if any..let us know.
V sai.

AP Tax Calculation issue with SINGLE TAX vs TAX GROUP

Hi Gurus,
i need your help on below, please advise!!
i have to calculate ap VAT tax on AP invoice,
(Rounding = nearest, precession=2, tax calcualtion= Include tax)
if i calculate 5% is the tax rate, then the tax amount is 0.47cents,this is in case of single tax calculation.
here my requirement was i need calculate 2 Taxes(TAX A AND TAX B (Rates are 5 AND 5%)
EG:
Invoce Base amount = 10 dollars
in case of single tax = 5/105 * 10 = 0.4761 cents(this is 48cents in apps with rouning nearest and precession 2)
tax mode = Include tax
In case of tax group = Tax A and Tax B = 5 + 5 = 10%, when i calculate this in apps its showing 45cents and 45 cents as tax A and B
why this tax caluclation is different with single tax and tax group.
tax code actual amount tax amount remaining amount
single tax 10 0.4761 10 - 0.48cents = 9.52 cents
tax group 10 45+45=90 cents 9.10 cents
Please Help !!!
Thanks,
Satish

Hi Vineeth,
This is Kathy from BSI Support. I wanted to make sure that you understood that the TF80 Like Reciprocal flag was made available in TF90 for testing purposes only. This was meant as a tool for customers to be able to compare their TF90 results to their TF80 output, to insure a successful upgrade. This funcitonality, however, was never intended to be utilized going forward. There have been significant changes implemented in BSI TaxFactory 9.0 regarding multi-state withholding (also known as reciprocity). There is information available on our website that explains these changes. If you log onto our website, please look under the "Whats New" section for an explanation of reciprocal functionality in BSI TaxFactoryu2122 9.0
If you have specific scenarios that you need help with, please contact us and we will be happy to assist you.
Regards,
BSI Support - Kathy

Unable to calculate required tax using compounding tax codes in a tax group

Dear All,
My requirement for an ordered item (Sale order/Invoice) is to apply VAT on "discounted price" and then apply advance tax on "sum of List price and VAT calculated before".
Example:
List Price=100;
Net selling Price after 10% disount=90;
VAT Rate:16%;
Adv. Tax Rate: 0.5%
I have performed following steps for this:
Separate tax codes made for these taxes For VAT-used taxable basis="after discount", whereas for Adv.tax="before discount",
and then assigned these codes to a tax group to be applied to the oredered item.
But system is not calcuating adv. tax as per my requirement and rather applying rate on "sum of discounrted price and VAT calculated before".
Kindly provide the workaround for this.
Regards,

Dear All,
My requirement for an ordered item (Sale order/Invoice) is to apply VAT on "discounted price" and then apply advance tax on "sum of List price and VAT calculated before".
Example:
List Price=100;
Net selling Price after 10% disount=90;
VAT Rate:16%;
Adv. Tax Rate: 0.5%
I have performed following steps for this:
Separate tax codes made for these taxes For VAT-used taxable basis="after discount", whereas for Adv.tax="before discount",
and then assigned these codes to a tax group to be applied to the oredered item.
But system is not calcuating adv. tax as per my requirement and rather applying rate on "sum of discounrted price and VAT calculated before".
Kindly provide the workaround for this.
Regards,

Maintaing Tax Groups in the Table CRMC_TAX_GROUP

Hi All
In order to download Materials from ECC to CRM2007 via Middleware, I need to maintain the Tax Groups in the Table CRMC_TAX_GROUP and then assignt the Tax Types to the ECC Tax Classifications.
However, I am unable to add entries to the table CRMC_TAX_GROUP either through SE16 or SM30.
I am only able to run the report in Data Browser (SE16) in display mode. When I try to maintian the table using sm30, I get the following Exit Message:
Check maintenance object CRMC_TAX_GROUP or update
function group CRM_PRSALESTAX_C
I request your help and suggestions in this regard.
Thanks in advance.
Regards
Chaitanya

Hi,
You can maintain that table using a maintainence view 'CRMV_TAX_GROUP' in sm30.
Thanks
Swagatika

Purchase tax group

Hi Experts,
In purchase order and AP Invoice i wanna put purchase tax group (item/service) as empty, but system is no allow. is it any setting for this? I'm using 2005A PL50.
Thanks.
Regards,
Danny

Hi Danny,
Your question belongs to the Core forum. It is not related to system administration.
To answer your question: Tax group must not be empty. This is by system design. You may create a tax group with 0 rate in case you need 0 tax.
Thanks,
Gordon

GRE and Tax Group

Could somebody share your experiences on 'Tax Group' Functionality? We have acquired a new company and need to maintain Tax group since we have to convert FICA, SSmax and stuff. In a way w2 should show 2 GRE for an employee and together the max amount should be met. Any suggestions/leads are most welcome
Thanks

Did you ever receive a response to your posted questions?
Thanks.

Proper Tax Group Setup

I need help correctly setting up the Tax Groups for an EU company. I think that I have them set up correctly, but I keep SAP always wants me to enter a Federal Tax ID on the A/R Invoice, even when the EU BP is VAT liable.
My current setup for a given BP (we are located in CZ):
Condition #1: Sale to a customer in CZ with no VAT number
Tax Status: Liable
Tax Group: CZ (rate 19%)
Condition #2: Sale to a customer in CZ with a VAT number
Same as above
Condition #3: Sale to a customer in EU with no VAT number
Tax Status: EU
Tax Group: EUN (rate 19%)
This group gives me problems. SAP always wants a Federal Tax ID on the invoice. I have been using <CountryCode>000000000 forthe tax id as a work around. I assume that I can set the BP up as Liable, but will the tax amount show up in the EU section on the tax reports?
Condition #4: Sale to a customer in EU with a VAT number (should not pay VAT)
Tax Status: EU
Tax Group: EU (rate 0%)
Condition #5: Sale to a customer outside EU
Tax Status: Exempt
Tax Group: EX (rate 0%)

Hi Dave,
currently B1 is not equipped to deal with a private end-customer in another EU country, that includes version 2007 A.
By definition, a document that carries a tax code tagged 'EU' must have a VAT number on the 'accounting' tab. Also by definition, any tax code that is tagged 'EU' will appear in the EU sales report.
Using the dummy VAT number in the document is right now the only way to be able to add documents of such type.
In the standard tax report you can select the tax codes which you wish to include, that includes EU-flagged codes.
You might consider creating a new EU tax group with a rate of 19% & linking that to a particular account (check with the company accountant). This will make it easier for an auditor to distinguish between EU companies & private persons your customer works with.
Cheers,
Kerstin

Acquisition tax group cannot be used this way

Dear Experts,
I'm trying to generate a Journal Entry using SBO 2007 SP01 using 2 accounts.
When I click on create boutton I get the following error message:
DSC1 - The acquisition tax group cannot be used this way for this transaction - Message 200-48.
Could you please tell me whu do I get this error and cannot create the JE?
Thanks a lot for your help.
Kind regards,
Walid.

Dear Gordon,
I desactivated the SP and the result is always the same.
Do you know what does this message concretely mean?
Thanks for your help.
Walid.

5002 Tax group account is missing

I'm using the DI Server to add invoices, and I suddenly get "-5002 Tax group account is missing" whenever I try to make an invoice. What's strange, is that this occures only on one of my SAP-databases, whereas the others are ok. Luckily it's in a testbase. I'm pretty sure this database worked before, so I suspect someone has done something in the base. Does anyone know what generates this error, so that I can fix it?
Here is my code:
<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header>
<SessionID>8956830C-D03A-24EA-94A6-838A5E4EEA02</SessionID>
</env:Header>
<env:Body>
<dis:AddObject xmlns:dis="http://www.sap.com/SBO/DIS">
<BOM>
<BO>
<AdmInfo>
<Object>oInvoices</Object>
</AdmInfo>
<Documents>
<row>
<CardCode>K99999</CardCode>
<NumAtCard>11311A 14:00</NumAtCard>
<Comments>11311A 14:00</Comments>
<SalesPersonCode>126</SalesPersonCode>
<U_DepartmentId>15</U_DepartmentId>
<U_Nettbank>0</U_Nettbank>
</row>
</Documents>
<Document_Lines>
<row>
<ItemCode>100312</ItemCode>
<Quantity>1.0</Quantity>
<UnitPrice>0.8</UnitPrice>
<TaxCode>U1</TaxCode>
<CostingCode>15</CostingCode>
</row>
</Document_Lines>
</BO>
</BOM>
</dis:AddObject>
</env:Body>
</env:Envelope>
And the reply:
<?xml version="1.0"?><env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope"><env:Body><env:Fault><env:Code><env:Value>env:Receiver</env:Value><env:Subcode><env:Value>-5002</env:Value></env:Subcode></env:Code><env:Reason><env:Text xml:lang="en">Tax group account is missing </env:Text></env:Reason><env:Detail><Object>13</Object><ObjectIndex>1</ObjectIndex><Command>AddObject</Command><SessionID>8956830C-D03A-24EA-94A6-838A5E4EEA02</SessionID></env:Detail></env:Fault></env:Body></env:Envelope>

Hi Runar,
This error occurs because the last line you are trying to add to the Marketing Document is an empty line. The document object automatically comes with one document line. It is only for the second and subsequent lines of marketing documents that you require the method oDocument.Lines.Add
So, don't Add new line for the first item.
If Satisfied give me rewards points...
Regards
Yogesh

JE Tax Group

Hi
In the Tax group I have C1, P1 and S1. This is the order as it display in Administration > Setup > Financial > Tax > Tax Group.
I have defaulted tax group in G/L Account Inventry to P1 ( Chart of Accounts > Assests > Inventry > Account Details > Default VAT group as P1 )
But every time I add Inventry G/L acount and it select C1 as the default tax group in jearnal Entry.
Is there any way to change the default value. I am using SAP 2007 A.
Thanks
Sanjaya

Hi Sanjaya,
I had checked your query in SBO 2007A PL:46.
I tried the same kind of scenario - mapped a Default VAT Group for a G/L account and selected this G/L account in journal entry along with "Automatic Tax" option checked.
In the Tax Group of Journal entry automatically the defaul VAT Group that I have set for the G/L account only comes.
Is there any thing I missed to understand your question?
Best Regards
Satish

GWCheck repetitive 'CODE 93 unused blob files (deleted)

I've run the standalone gwcheck a few times now. with 'contents+attachment file check' and Fix problems.
I've run it on user/message.
It seems to me that it keeps reporting the same message after every run, I get
Correctable conditions encountered:
CODE DESCRIPTON COUNT
93 Unused blob files (deleted)..................583
It keeps reporting the same count, 583 files.
It also reports
Uncorrectable conditions encountered:
CODE DESCRIPTON COUNT
50 Unused blob files (deleted)..................18
Any idea on how to correct it?

Originally Posted by fribert
I've run the standalone gwcheck a few times now. with 'contents+attachment file check' and Fix problems.
93 Unused blob files (deleted)..................583
It keeps reporting the same count, 583 files.
50 Unused blob files (deleted)..................18
Any idea on how to correct it?
In the details above it should show the folder and BLOB file(s) it wants to delete as it crawls through the message databases. You can check to see if they actually exist. IF it is not deleting them, there is usually a reason, like they are too recent to delete, they are help open, or the options actually in effect do not allow it to repair. In the beginning of the GWCHECK log, it will show the options, and the start / end time of the run.
I'm wondering if you are seeing the same GWCHECK log over and over, so check the start / end times to ensure its not just regurgitating the same log.
-- Bob

Fm to add tax group to business partner

Hi.
I have Z function to create new business partner. however I have problem with one segment of data. I can't find function or bapi to add tax group classification to bp. I'm refering to data where you define tax classification data: country + tax type + tax group and not to tax numbers which can be maintained via BAPI_BUPA_TAX_ADD.

Hi Robert,
Please provide the FM which is used for above requirement.
Regards,
Vignesh

Unused Tax Group Deletion

Similar Messages

Maybe you are looking for