UPC_F104 Entry not possible, var does not have replacement type user-spec.

Hi,
On of my exit variable keeps issuing me the following message when selecting a value:
UPC_F104 Entry not possible, var does not have replacement type user-spec. vals
This exit variable is based on other variables (non-user specific). The indicator 'Restriction of values required by user' is flagged.
Any idea what might be the issue ?
Thanks
David

David,
User exit variables won't work if there are multiple rows of values being derived incase 'Restriction of values required by user' is flagged.
Make sure that derivation of variable value is restricted to only one row.
if you have a need to derive multiple rows of values, simply uncheck the flag 'Restriction of values required by user' & you will be good to go.
hope it helps.

Similar Messages

ABNAN- Posting not possible (Asset does not manage postable areas)

Hi Experts,
I am trying to do a post capitalization creating a new asset using transaction ABNAN with the transaction type 400.
I get the Error " Posting not possible (Asset does not manage postable areas) "
Can some one help me with this.
Thanks in Advance
Vijayanth

Dear,
Check Asset master if it has depreciaiton areas activated.
Regards,
Chintan Joshi.

IPod model A1059, freezes, unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or on windows explorer. What is the problem and how do I fix it?

IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or in Windows Explorer. What is the problem and is there a fix?

If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
B-rock

Error message: Entry 1 WC 99 does not exist in T508A (check entry)

Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error. In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
I went to the table using se16 but could not make out how I can input those entries in the table....
Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PM

you have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR

Processing routine ENTRY in program ZRVADIN0111 does not exist for smartfor

Hi ,
This is the log , I am getting in vf02 ..
==========log==============
Message Text
Processing routine ENTRY in program ZRVADIN0111 does not exist
Technical Data
Message type__________ E (Error)
Message class_________ VN (Output control)
Message number________ 068
Message variable 1____ ENTRY
Message variable 2____ ZRVADIN0111
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 0
Sort criterion________
Number________________ 1
======================================end log========================
My driver program is same as below and form is ZSUNDRY_INVOICES_VENU'
================my driver program ===================
*& Report ZRVADIN0111
REPORT ZRVADIN0111.
TABLES : nast.
*TYPES : BEGIN OF ty_header,
       vbeln TYPE vbeln_vf,
       fkdat TYPE fkdat,
       XBLNR TYPE XBLNR_V1,
       STCEG TYPE STCEG,
       kunrg TYPE KUNRG,
       name1 TYPE AD_NAME1,
       city1 TYPE AD_CITY1,
       post_code1 TYPE AD_PSTCD1,
       street TYPE AD_STREET,
       total TYPE NETWR_FP,
       END OF ty_header.
DATA : sum TYPE i VALUE '0'.
*TYPES : BEGIN OF ty_item,
       matnr TYPE matnr,
       arktx TYPE arktx,
       fkimg TYPE fkimg,
       VRKME TYPE VRKME,
       netwr TYPE NETWR_FP,
       MWSBP TYPE MWSBP,
       unipr TYPE NETWR_FP,
       END OF ty_item.
DATA : gs_header TYPE zsd_inv_header,
       it_item TYPE STANDARD TABLE OF zsd_inv_items.
FIELD-SYMBOLS : <fs_item> TYPE zsd_inv_items.
DATA : gv_adrnr TYPE adrnr.
*data: s_vbeln type vbeln_vf.
*select-options : so_vbeln for s_vbeln.
*START-OF-SELECTION.
*form entry.
*--- Get header
SELECT SINGLE vbeln fkdat xblnr stceg kunrg bukrs
           FROM vbrk INTO gs_header
           WHERE vbeln = nast-objky.
SELECT matnr arktx fkimg vrkme netwr mwsbp
       INTO CORRESPONDING FIELDS OF TABLE it_item
       FROM vbrp WHERE vbeln = gs_header-vbeln.
    LOOP AT it_item ASSIGNING <fs_item>.
      <fs_item>-unipr = <fs_item>-netwr / <fs_item>-fkimg.
      sum = sum + <fs_item>-netwr.
      ENDLOOP .
      gs_header-total = sum.
      CLEAR : gv_adrnr.
SELECT SINGLE adrnr FROM kna1 INTO gv_adrnr WHERE kunnr = gs_header-kunrg.
   SELECT SINGLE name1 city1 post_code1 street FROM adrc
          INTO (gs_header-name1,gs_header-city1,gs_header-post_code1,gs_header-street)
          WHERE ADDRNUMBER = gv_adrnr.
*end-OF-SELECTION.
data: fm_name type rs38l_fnam.
****calling entry routine
*FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen.
CASE retcode.
   WHEN 0.
     return_code = 0.
   WHEN 3.
     return_code = 3.
   WHEN OTHERS.
     return_code = 1.
ENDCASE.
*ENDFORM.                    "entry
calling smartfrom from ABAP
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname                 = 'ZSUNDRY_INVOICES_VENU'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                  = FM_NAME
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3.
if sy-subrc <> 0.
   WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
    IS_HEADER                  = gs_header
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    IT_ITEMS                   = it_item
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*call function FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
   GS_MKPF                    = INT_MKPF
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5.
*if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*endif.
end of call function module from abap
*endform.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
can any body help me with proper code , i have to insert in driver program ..to retify error ...
thanks
Regards,
Venu.

Call transaction NACE (type V1 for Sales Order) look for the required output type and check program and form in processing routines. (and add code markups when you copy source code in forums)
Regards,
Raymond

Processing routine ENTRY in program ZINVOICE does not exist

Hi all,
I am finding an error after taking the print out of Excise Invoice in Tcode J1IP.
We had a requirement where we created new output type and changed the driver program for the output assignment earlier this invoice was developed in script we changed it to a smartform. and assigned in NACE.
Its working fine we r getting the printout also after getting the print out when I goto tcode VF02 a error log is being created
when i click on the error log its showing
Processing routine ENTRY in program ZINVOICE does not exist
Zinvoice is the driver program.
I hope to get inputs from you in resolving the issue.
Hope to get the reply at the earliest
Shivakumar K B
9886920258

This error message is quite tricky and misleading one.
Make sure in your custom program, all the logic must be in a FORM-ENDFORM.
form entry.
Logic...
endform.
this form may have any name (not needed to be only ENTRY).
The signification of the form is that this name will be given in the subroutine name in NACE transaction.
the standard program RSNAST00 which triggers all the print program dynamically.
it will fetch the name of the print program and form name from TNAPR table and calls the same.
perform (TNAPR-RONAM) in (TNAPR-PROGNAME).
At run time, the TNAPR-RONAM and progname will be filled with your z program name and the subroutine name.
Rgds,
SaiRam

Entry point 'Test Batch' does not exist

Hi Forum
I am in the process of upgrading one of our testsystems from TestStand version 3.1 to version 4.1.
The system is started up by a Labview app which calls TS by a command line call (-runEntryPoint "Test Batch" "C:\..."). However, TS 4.1 doesn't recognize the "Test Batch" entry point (worked fine in 3.1), and I get an error box with the message "entry point 'Test Batch' does not exist". I have checked that the entry point exist in the sequence model file, and if I go to the "Execute" menu, I get the choice to run "Test Batch".
I am able to se the -run command, but then I, for some reason, don't get the entire sequence.
Any suggestions to what I am doing wrong? I am logged in to TS automatically with my windows login.
B.R.
Martin
Solved!
Go to Solution.

Hi,
There should be a document in \Conponents\NI\Models\... which should give you the basics for the various process models.
here is some other references that may help
http://zone.ni.com/devzone/cda/tut/p/id/7958
http://digital.ni.com/public.nsf/allkb/D9E7A0BDDDA2A87886256FD9007598D2
Check out some of the related links
http://zone.ni.com/devzone/cda/tut/p/id/3819
Regards
Ray Farmer
Message Edited by Ray Farmer on 09-24-2009 11:00 AM
Regards
Ray Farmer

P16B Error : Entry pernr date VA does not exist in T5W/G

Hi
We are facing an error wherein we are not able to update the salary package details (FBP) using transaction P16B.
It throws an error saying "Entry <pernr> <date> VA does not exist in T5W/G" before the screen loads.
On debugging we found the error occurs in HR_SPA_VARIANT_GET function module where it checks for entry in the table T5W7G.
The entry in the above table is not getting created even if update using P16B_ADMIN.
The error is getting rectified if we manually create the entry in the table T5W7G and T5W7I for both VA and VB.
I am unable to find a configuration node for creating the entries in the table's T5W7G and T5W7I .
Please advice on how this error is to be rectified.

Hi
You have to either fix this in configuration through SPRO or If it is not solved through SPRO then you have search for an SAP note.
Thanks & Regards
Jyo

I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

The trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser.

HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png ‏5 KB
averages of 10.vi ‏9 KB

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist

Hi BW Experts,
I´m facing a Problem while releasing a Transport from Dev to Quality System. The consisty check shows the following objekt as not available:
Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist
A check for the Object: R3TR EVEN showed that it is a Event Collector which seems to be missing. The transport consists a process chain which listens to an event. Is this the mentioned Object or is it related to some different topic? The process chain is correct and activated.
Thanks in advance for your help.
Best regards
Christian

Hi Abdullah,
I followed your advice and did a check if the object was writen to my transport. The object was missing on the transport. But also searching in transport connection did not help.
So I had a look into the table TADIR and also here I could not find the mentioned object which was realy strange to me, as the process chain was active and correct.
I than deleted the event collector(AND) object in the process chain and created a new one. A check in the table TADIR now showed the before invisible EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 and also the new one created. The new EVEN Object(and also the old deleted one) was written to the transport. Importing it into Quality System worked without any problems.
I´m not 100% sure about this behaviour but maybe its linked to the fact that the process chain was a result from the Dataflow migration wizzard. Maybe while migrating that dataflow something went wrong.
Anyway, thanks to all of you for your help!
Best regards
Christian

Error "Processing routine ENTRY in program ztest does not exist"

Hi All ,
           I facing problem in Samrt form driver program
        Error "Processing routine ENTRY in program ztest does not exist"
         when i given print through T.Code Me22n
         Can you suggest me why i facing this problem.........
This is below my driver program code:
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Mar 10, 2010 9:53 AM

Hi nIck,
         I write the code this way
          can you suggest me any changes are require
FORM ENTRY USING RETURN_CODE TYPE I US_SCREEN TYPE C.
PERFORM DATA_FETCH.
PERFORM DATA_PROCESS.
PERFORM CALL_FORM.
ENDFORM.                    "entry
*&      Form data_fetch
      text
FORM DATA_FETCH.
PONUMBER = NAST-OBJKY.
ENDFORM.                    "data_fetch
Regards
Raju
Edited by: raju mahapatra on Mar 11, 2010 7:23 AM

Processing routine ENTRY in program zprog does not exist

Hi experts,
when i try to see print preview from ME23N it is showing status message like below....
"Processing routine ENTRY in program prog does not exist"
Message no. VN068
Any help....
Regards
Ram

As per my understanding, when you press print priview sap script is called by this.
This sap script name and its driver routing in maintained in a database table .check t*
As per the message this is missing.You need to update the processing routing in this table.
Hope this helps you.

Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMB/PRAM resetting did not work. Does anyone have some advice or can help?

Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMC/PRAM resetting did not work. Does anyone have some advice or can help?

Hi Melissa,
Pretty strange, but...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, does it happen in Safe Mode? Reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

UPC_F104 Entry not possible, var does not have replacement type user-spec.

Similar Messages

Maybe you are looking for