Update 10.6.7 and problem with nas

I have upgraded Snow Leopard to version 10.6.7 and now I can't access to nas with samba (by smb://nas). With previous version of Snow Leopard I couldn't write file on nas but I could read files.

I'm having the exact same problem/symptoms as mrt60. I have been using mucommander to write files to the nas; this continues to work after upgrading to 10.6.7. However since I can't mount the nas drive in either the finder or through the “connect to server” function, I can no longer “use” files stored on the nas on my desktop and need mucommander to copy them back - almost defeats the purpose of the nas. By the way, using the IP address instead of the nas name to connect does not work either. This has been a problem since Snow Leopard since the very same nas/configuration was working fine in Leopard. Would love to hear if anyone has any success fixing this. I've tried almost everything I could find online without success.

Similar Messages

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

Eligible update from adobe to fix problem with brushes?

As you know I tryinf find out some solution to fix my problem with Adobe Photoshop cs5 Extended version with the newest updates- I ve got a problem with corectly view of brush preview on my screen and bugs with it- always change to normla cursor, exactly this:
http://www.youtube.com/watch?v=UAwav8h41o0
I have already contacting INTEL:
Try to find out some updates to my video cards: INTEL HD GRAPHIC 3000
But inel told me that is not their problem and they gonna not help me, they told me that I should contact APPLE,
So I contact apple:
Apple told me that they have no responsibility from 3rd party company as ADOBE and their software: Photosohp CS5 and they told me as well that I should contact ADOBE,
Ok, I try to cntact adobe:
but I cannot find some contact on official site- email, where I can deteailed describe my problem, so for that I try to find some information through the community forum here:
PLEASE IF THIS READ ANYBODY FROM DEVELOPER TEAM FROM ADOBE:
Can you give some advice how can I fix my problem?
THANK YOU VERY MUCH

You could try
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop
But are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance like repairing permissions, purging PRAM, font validation, etc.) yet?

Should I update my older phone and sync with ios 5 prior to doing a restore?

Should I update my older phone and sync with the new ios 5 prior to doing a restore to my new iPhone 5? Is that necessary?

Well...the answer is no. You can't downgrade the iOS, but it will update. I just kept the backup from the older version and did a restore with the Iphone 4S and it worked fine.

Itunes update 10.4(80) causing problems with MDNSresponder, configd, and KRB5KDC.

I am a relatively new mac user and have no idea how to procede here. I would be grateful for any help. Here's the story:
Last week I updated my itunes like a good boy when prompted. I am not certain, but there may have been a mac os10 update along with it. I always look at the details of what the update is, except of course this time. When the update finished, the macbook wanted to reboot and I let it. However, when the computer started up, I began to see wierd dialouge boxes asking me if I wanted to run KRB5KDC, then MDNSresponder, and configd. I ticked no to all, and discovered I could not connect to the internet or my NAS. I then I got on my PC and looked these up discovered what they were and rebooted the mac, this time ticking yes. At this point my mac told me it could no longer keep automatic time and asked if I wanted to set the clock manuallly, so of course I said yes and did. That solved my connectivity issues but here are the ones that remain:
1) I can no longer accept secure certificates from websites... safari tells me they have expired or not to be trusted when I know for a fact that is not true. How can I be sure of any other websites?
2) My macbook pro can no longer keep the correct time and date. It seems whenever I go into sleep mode a new time and date appears when the machine awakes.
3) All of my iCal info has been errased when I last synched. I discovered that yesterday, thus prompting me to post. I can't have that. Thankfully all the information was retained on the macbook's drive.
4) Are there any other issues I may not have discovered yet?
Just for added info I am running OS X 10.6.8 (10K549) on a 2.66 intel coreduo with 4 gigs of ram
I know this is rambling but I just don't have the proper technichal vocabulary to describe my problems any better.

John,
Even i am facing the same exact problem the way you are facing, but i thought my net is having problem so i changed the net also. Now it seems that Apple has problem with this version.If you find any solution kindly mail me on [email protected] I would appreciate your help for the same.
Thanks and Regards,
Mayuresh,

Upgrade from LMS 3.0.1 to LMS 3.1 or 3.2 and problem with devices update

Hello
How to upgrade from LMS 3.0 December 2007 update to LMS 3.1 or LMS 3.2. The problem is the large number of C2960S-24TS-L switches that my organization has and cannot managed them..
I tried to upgrade devices through Software Center but always Ciscoworks informs me with the following message.
"Error while downloading package information from Cisco.com for the selected products. See the log file for details".
Also i can not run EOL/EOS inventory report. The message is
" INVREP0102: Cisco.com user credentials are invalid. Enter correct credentials." I check my credentials and is right.
The server has access to www through proxy without any restrictions.
In the past I've already updated devices through the software center. Also in the past i ve run EOS/EOL inventory reports.
The LMS 3.0 December 2007 has the following products
LMS
3.0.1
16 May 2008
CiscoWorks Common Services
3.1.1
02 Jul 2009, 07:44:58 EEST
2.
Campus Manager
5.0.5
11 Oct 2009, 07:36:10 EEST
3.
CiscoView
6.1.7
02 Jul 2009, 07:45:05 EEST
4.
CiscoWorks Assistant
1.0.1
02 Jul 2009, 07:45:05 EEST
5.
Device Fault Manager
3.0.5
12 Jun 2010, 07:31:48 EEST
6.
Internetwork Performance Monitor
4.0.1
02 Jul 2009, 07:45:11 EEST
7.
Integration Utility
1.7.1
02 Jul 2009, 07:45:14 EEST
8.
LMS Portal
1.0.1
02 Jul 2009, 07:45:16 EEST
9.
Resource Manager Essentials
4.1.1
02 Jul 2009, 07:45:17 EEST
Has anyone knows what can be the problem??.
Thanks

Hi,
the problem to access cisco.com is because of a "bug". Its ID is CSCto46927.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto46927
Symptom:
After the 16th of June 2011 LMS will no longer be able to download Software and Device Package updates, or PSIRT and End of Sale/Life information from CCO
Conditions:
Hosted services in Cisco.com that are being leveraged by LMS, for downloading the latest Software and Device Package updates, as well as the PSIRT and End of Sale/Life information are being migrated to a new framework and the old services will be retired.
This will affect all LMS 3.x and 4.x versions.
Refer to https://supportforums.cisco.com/docs/DOC-16806 for more information
Workaround:
Users of LMS 3.2.1 , 4.0 should install the patch that can be downloaded from cisco.com
Users of earlier version will need to upgrade to LMS 3.2 and then install the LMS 3.2 SP1 patch set before installing the patch"
Because of that it is necessary to upgrade not only to 3.1 or 3.2, you need 3.2.1 to get the patch and then access to cisco.com again.
The question about the better way for updating I can't answer. I did a update to 3.1 and then to 3.2. But I think you will find the requirements for the updates in the notes for them.
But I can't find LMS 3.1 in the cisco download center. There is only 3.2 and 3.2.1 available for me.
Sven

10.5.3 update and problems with ReadyNAS server

After updating to 10.5.3, I have had some problems with photoshop files on my Netgear ReadyNAS server
• I worked on a couple of photoshop files - files that existed previous to the update. I made some changes and saved them.
• Later, when I tried to open those files, I got the following error message and I'm not able to do anything with the file:
*Could not complete your request because it is not a valid Photoshop document.*
• It appears that new files created, saved, worked on later and save out again work fine. In other words, files created after the update don't appear to experience the same issue.
• I've also seen the problem when creating new files in DVDPRO HD format with a square pixel aspect ratio and with layers.
• I tried the same routine on local drives on my hard drive and had no problems. So, it doesn't appear to be a problem with my Macbook
• I also tried the same tasks with my tower before I updated the software and didn't have any problems. After the tower was updated, I tried the exact same thing and received the error message.
So, everything is telling me that the issue stems from the Mac update. So far, I only see the problem with .psd files - other formats don't seem to be a problem yet. I tried InDesign docs, flash files and they look to be fine. Strangely enough, jpgs changed in photoshop don't seem to be an issue either - just .psd files.
Checked with Netgear and they weren't a whole lot of help. They claimed it might take 60-90 days for an update on their end. Is anyone else experiencing this problem on their server? Any suggestions on what to do?

Having exactly the same problem and it is crippling my design studio from last night. Saved a previously created before the update Photoshop file (110mb) yesterday evening after doing the Apple update, opened it this morning, no joy.
It seems that this problem has been around before but not that I'm aware with the ReadyNAS server. Adobe say that you shouldn't use a networked server as they don't support this way of saving:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403815&sliceId=2
Sorry that this post is brief but we are copying all the files to a separate server as we have deadlines. All I can say is nice work Apple. *****!!! The same goes to Adobe.

Y510p and problem with Update Nvidia Driver

Hi everyonei have problem with updating my y510p lenovo laptop nvidia driver ,my current nvidia driver version is 327.62 which i download from lenovo website,Now for better performance in new games like gta v and witcher3 ,i decide to updating nvidia driver,first remove my nvidia graphic driver from add or remove then download nvidia ver 350 from nvidia official web site , which nvidia website confirm it support my graphic card which is Gt755m , then i install new ver and during install i check clean install , after successful install , restart laptop , then there was problem . when i try to open nvidia control panel it wont running and an error showed up and said "You are not currently using a display attached to an NVIDIA GPU" .i try to open a game , game running in really low fps and i find out game run on hd graphic of my laptop and my nvidia graphic wont run .The only way to repair was i install my last nvidia driver 327.62 and run a system restore .guys what is your suggestion and how i can update my y510p nvidia driver ?Thanks

Hi Y510Man,
     The video graphics installation order is important. You need to install the Intel Graphics first, and then do the Nvidia. IIRC you should un-install the Nvidia driver, then re-install (or upgrade) the Intel HD Graphics driver. Reboot, and install the new Nvidia driver.
     I don't know why, but every time I upgraded my Y470 Nvidia driver, I had to use this procedure. First install, or re-install, the Intel driver, then install the Nvidia. You can't just upgrade the Nvidia driver without a re-install of the Intel. I think it has to do with the Optimus setting, and the automatic switching.
    Let us know how it goes.
Cheers
DragonRider

Changes in security from 7 update 45 to 7 update 51 and problems with Java applet

Hello,
After the update (from 7 update 45) to version 7 update 51 we've gotten some problems with a Java Applet as it won't run.
When changing security settings to "medium" it works, but it would not run under the default "high" setting. This lead me to update the manifest file as follows:
Manifest-Version: 1.0
Trusted-Only: true
Application-Name: MyApplet
Permissions: all-permissions
Caller-Allowable-Codebase: www.MySite.com
In addition to this, I added the <param> tag in the HTML page.
<applet name="MyApplet" code="MyApplet" archive="MyApplet.jar">
<param name="permissions" value="all-permissions" />
</applet>
The applet is digitally signed with a certificated issued by Verisign.
It now runs on my system. But I noticed that it also runs if I switch the security setting back to "high", which doesn't make any sense to me.
I've tried another computer and to the same thing there. Would not run. I switched to "medium" and and the applet worked. Switched back to "high" and it still works.
I've tried this in both Google Chorme and Internet Explorer 11.
On a third computer it won't run at all, getting a different error message than on the other two, but still related to permissions/security.
The console log message is:
"liveconnect: Security Exception: JavaScript from http://MySite.comn/MyPage.html attempted to access a resource it has no rights to."
Any ideas what I'm missing or what I need to change to get this beast to run everywhere.

I tried changing the Caller-Allowable-Codebase to not include "www." and it started giving the the same error message as for the third machine in the test.
So, I changed Caller-Allowable-Codebase to "*" which made it work on all machines.
I don't quite understand why it acts differently on different machines, if it's ok with www.MySite.com on one of the the machines, it should be OK on all no?
I don't see a problem with letting it be "*" but it would be nice to understand what's going on.

Update iOS 8.0.1 problem with carrier network and touchID

I Update my iPhone 6 to iOS 8.0.1 , now it's just an iPod touch the update killed my carrier and my touchID, I will not do a restore as I just bought my phone and i don't want to lose so much time.
When do you think will Apple release a new update OTA to make my iphone working again?

This is just annoying!
Same thing in Germany! Updated my Iphone 6 (128gb) to Ios 8.0.1 late in the evening. Couldn´t restore it because of the traffic on Apple´s Server.
Now I´m sitting at work with my Ipod (lol) and just mentioned that even the Artwork of Movies or Music is lost. Just grey boxes.
This is not Apple anymore!!!
Is this the "just one more thing"?! --> Next time I will think twice before buying some stuff of apple!!

Front Row problems with NAS drive (2 of them)

OK... having 2 problems with Front Row...
Background
First, I should say I'm new to Mac OS X, had early Macs, but went PC a long time ago.
I burned all of my music from CDs (I own) on my WinXP box, then copied them over to a NAS drive for easy access between computers.
The NAS is an Infrant ReadyNAS. The drive is shared on my network. The keychain app has the password information to the share. Though I should note, it doesn't matter if I remove the password from the share.
The ReadyNAS has a nice feature whereas it will act as an iTunes server, this is enabled. I do not have AFP or NFS enabled on the NAS since I regularly access the drive on WinXP machines. All access is SMB/CIFS.
I mounted the drive and created a link between the iTunes home folder and the network share. Thus, iTunes automatically mounts the share when started and seems to be comfortable that the files are accessible.
Everything works fine in iTunes.
Not so in Front Row.
Problem #1
Front Row will not read the "Shared Music." When I go this route in Front Row, it finds the NAS iTunes Music Server, but insists on being given a password to access the "Share." Of course, you can't enter a password.
Again, everything works just fine in iTunes. It shows the server fine under "Shared," and immediately brings up all music and plays it readily.
Just doesn't work in Front Row.
Problem #2
Front Row stopped auto-mounting the NAS share which is linked to the iTunes music folder. iTunes will mount it, if it is not mounted already when it first is asked to play a song. Up until this morning, Front Row would automount it too. This AM, after getting the Apple security update, Front Row would not automount the share. Note, if I automount the share manually, or go to iTunes (which properly automounts) before launching Front Row everything works fine from Front Row.
It took me a second to figure this out, as Front Row's terribly missleading error message is, you are not authorized to play this song - authorize it (well, that is the point of the wordy message). Of course, this confused me, since these are not iTunes store songs and of course, this worked fine yesterday.
Anyway, what is really happening, (I surmise) is it is not automounting the share and cannot read the song, and seemingly defaulted to the assumption it is a DRM problem.
I have to say, this is one out of the old Microsoft handbook. Missleading error messages and broken functionality from (it would seem) rushed out security updates.
I'm gonna have to tip my hat... some of those Microsoft developers that made the move from Redmond to Cupertino brought their game with them!
LOL
Anyway... anyone that can offer a hand would make my wife very happy. She likes Front Row... and now she has to start iTunes to make Front Row work. Sheesh.
Thanks in advance for the help.
iMac Mac OS X (10.4.8) Nah

Hi,
same thing here: I have 3 LCD-screens (30,26,20 Apple Displays) on two graphic-cards (ATI X1900XT, NVDIA7300GT). Front Row does not display any pictures or movies. Menus work like they should, Music also plays fine, but images are not shown. It only shows a white screen on the main screen (30") and the other two are dimmed to black. If i type ESC i get back to the menus...
Any hint? Regards - Peter

P35Neo2 FIR and problem with booting

So I have problem with booting my compie. Compie try to boot to the part of start windows, after that in case of switch into graphicis mobo going down and restarting (WinXP SP3). I think, that problem is not in PSU, cos i have 800W XILENCE (+3,3V 28A, +5V 32A, 4x+12V 20A, -12V 0,5A, 5VSB 3A), Board P35 Neo2 FIR, E7200 proc, bios 1.9 (updated). I have 5 disk and use raid function in bios. Graphic Radeon HD3650, Memory Zeppelin 4x1GB KIT 800Mhz.
I start with change of PSU from 550W to 800W but it didnt work, previus PSU had (+3,3V 30A, +5V 32A, 2x+12V 18A, -12V 0,8A, 5VSB 3A),
i try change memory, but no efect.
After update bios there was standard warning about bad cheksum, after resave Bios settings it was gone, and compie boot after that.
Any idea?
Thanks

So my problem is solved...but my feeling of this is not good...
I updated BIOS from 1.9 to 1.10, reset Bios settings, after restart i pressed F2 for load standart settings and i changed in Bios only that i am using RAID and disable disket and it works...i boot my compie into windows without any problem...
So i try change another things in Bios and my compie hangs in continous resets without booting into windows...no BSOD only restart and restart...
After reseting Bios settings and again Load to Default it works...and run windows...
There was only one new thing ... screen flick for the second with new screen about checking NVRAM ....this screen was not visible before (and maybe this is the problem), cos if i change something in BIOS about clocking and power management and other ones, this screen is by booting missing...and compie not run in Windows...
Next thing what i see, that in CPU multiplication dont work multiplication 9,5 and proc used frequency 2400 (9x) (it is E7200 on 2533)
i hope that this bios 1.10 fixed my problems...and my opinion is that P35 Neo 2 FIR is not ideal board for E7200 proc...so i m looking for another proc...and maybe another board...

Alpine CDE-103Bt Head Unit and Problem with 160 Gig Ipod Classic

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

MobileMe Gallery and problems with new password

Hi. I'm using iPhoto 09, and have posted many MobileMe galleries over the years. Recently, I changed my MobileMe password. Now, iPhoto tells me that an "error occurred with the publication of album 'XYZ' Your MobileMe account information is not correct. The provided login or password is not valid" and it prompts me to return to MobileMe Preferences to re-enter my correct login and password. Well, the trouble is that I've done this many times. (Which also causes sync problems - but that's another story.) And though my System Preferences are now correct, I still cannot successfully update a MobileMe gallery in iPhoto. I checked my settings in the Keychain, and all is fine. I also trashed iPhoto preferences, but the problem still remains. Any thoughts on how to solve this irritating problem? Thanks!

I found another solution based on this posting.
http://forums.macrumors.com/showthread.php?t=689762
Works perfectly.
+I have the same problem and started a thread about it on Apple's discussion board, see http://discussions.apple.com/thread....art=0&tstart=0+
+First, I'd suggest sending Apple feedback on it (select "Provide iPhoto Feedback" from the iPhoto menu).+
+When you change your MM password, you need to enter the new password in MobileMe in System Preferences. When you select MobileMe in System Preferences, it will (correctly) say that your password has changed and ask for the new one.+
+It looks like the problem with iPhoto is that when you enter the new password in MobileMe preferences, the keychain entry for it isn't being updated. Look for publish.me.com in Keychain Access. It will probably have the old password. Changing it there and then signing out/in in MM System Preferences seems to fix the problem with iPhoto. If not, try deleting publish.me.com in Keychain Access and then sign out/in to MobileMe in System Preferences.+
+Give it a try and post what happens.+
Jay

Exchange 2010 : Doubt with recipient type and problem with disappearance of the original recipient in the mail relay

Hello. First of all, thank you very much for your attention.
After that, I will expose the problem:
I have a user domain called "comercial" with a corresponding mailbox "[email protected]"
. This user
has assigned multiple emails such as "[email protected]", "[email protected]", "[email protected]" , having as default email "[email protected] ".
On
the other hand,
another domain user
called
"menganito" with it's mailbox "[email protected]" account, also has a few mail accounts "[email protected]", "[email protected]", " [email protected]"
...having
as default email "[email protected]
The user "Comercial" is forwarding
all of it's mails to the user "menganito".
The problem is that "menganito" is not receiving the exact
"comercial"
sender email, but the email which appears by default ("[email protected]").
"Menganito" would like to know
from which email exactly the mails he is receiving have been sent ("[email protected]",
or "[email protected]"
or "[email protected]").
Also, he would like to knowthe email of the original sender (from the outside of the domain) whom the user "Comercial"
have received the email from.
In another type of email servers (Kerio,...)
this is not a problem, because forwarding by
defaultis always showing
the original sender and original receiver.
Maybe the problem comes from the recipient type I'm using.
Should I use another type of recipient? should I use a transport rule?
Any idea ? Thanks again in advance.

Hi Simon. First of all thanks for your answer.
This happens with all accounts. I tried with news accounts and different browsers for OWA and Outlook anywhere and happens the same. Is not a cache problem
The problem is
when "[email protected]"(default
and set as default answer
account by
exchange)
receives
a message in "[email protected]" when
forwards to "Menganito"
this message will appear from"[email protected]"
instead of "[email protected]".
This happens with all accounts.
I can understand that i can't avoid
default reply address on the same
domain, but also with different domains happens
the same?
The platform is only one clean and updated server 2012 as dc and another clean and updated server 2012 with exchange 2010 sp3 directly and after rollup 4 for exchange SP3, no previous versions and servicepacks of exchange 2010 was installed before. Before
install exchange 2010 sp3, i installed all the filterpacks (3) and .net 3.5 and all updates that i finded for 2012 server (i tried for 2 days): No more updates for sure. After, in powershell, i put this:
Add-WindowsFeature NET-Framework-Core,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,Web-Mgmt-Tools,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy
-Restart
The machine and exchange works good (i3 with 4gb ram, and raid 1 1tb of HD) and the organization only has 15 mailboxes. No problems with even viewer and all is correct.
Thanks again.

Update 10.6.7 and problem with nas

Similar Messages

Maybe you are looking for