Update base value

We had a payment for a capital lease go out with condition details of "Settlement according to conditions" - which prevented the payment from updating the base value.  Is there a way to update the base value on the back end to reflect the payment?

Ravi,
I am responding to your question on Tim's behalf.  In FWZZ, the condition is set as Int. (per.-quoted) effective from the start of the lease which was 2008.
We have bi-annual installment repayments set up in FWZZ as well.  The last installment repayment was paid in January, 2011.  Up to and including that point, the base amount was correct as well as the interest calculation.
When the January payment was made, the condition details for the dates under other calculation data was first and last period of "Pro Rata Temporis Calculation" and "Settlement According to Conditions".
After that time, the base amount does not reflect the January payment.  Due to this, the interest is calculating the exact same amount going forward.  I changed all subsequent condition details for the installment repayment to "Include Fully" for both the first and last period and "Settlement on Calculation Date".
This changed the base amount going forward, but still does not reflect the January 2011 installment repayment.  So obviously, the interest calculation is incorrect.
To your other question, we are on ECC 6.0 EHP4.  I really appreciate your help.

Similar Messages

  • Update Excise base value in MRP based and Non-MRP based billing

    Hi Gurus,
    We need to update Excise Base Value for Statistical Condition type. How to configure the same ?
    Sl.No  Pricing Condition Type      Active   Statistical           Passed to Accounting        
    1        MRP Price (Statistical)                                                                               
    2        Abatement (Statistical)                                                                               
    3       Surcharge  (Active&Passed to Accounting)
    4      Assessabel value (Statistical)
    (No:4 This is the base for calculating Excise duties i.e Excise Base Value)
    5       List Price (Statistical)                                              
    6       Customer Discount(Statistical)                             
    7      Surcharge(Active&Passed to Accounting)                                                                 
    8      Net Price (Active&Passed to Accounting)                                                                     
    9      BED   (Active&Passed to Accounting)                                                                          
    10    ECess  (Active&Passed to Accounting)                                                                       
    11   SECess  (Active&Passed to Accounting)
    12   Total collected from Customer(Statistical)              
    Issue: When there is MRP Price higher than the List Price, then the Cutomer will be charged on the basis of Net Price only, but the duties amount to be paid to the government on MRP Price. so in this case I can not calculate Excise Duties on the Actual Net Price condition which is active and passed on to accounting. And always the Excise duties to be calculated on Assessable value(no:4). But that condition type if I make activate then it will pass to accounting and also getting added to the Net Value(KOMP-NETWR). How to come out of this situation.(as per the customer requirement both MRP based materials and non-MRP based materials are also considered in the same sale order i.e with the same pricing procedure).
    Becasue of this EXBAS is not getting updated in the J_1IEXCDTL.
    Gurus, Share your valuable experiences and suggestions.
    Thanks &Regards
    Sreekanth
    09611147585

    Dear Lakshmipathi,
    As per your suggestion, I have maintained Material Assessable Value and then also the duty values are calculating on the basis of Assessable value maintained in the Pricing Procedure. It is not taking the Material Assessable Value into consideration. And it is not getting updated the Excise Base Value.
    In which case Material Assessable value will be taken into consideration?
    How to update the Excise Base Value in J_1IEXCDTL tables?
    Thanks&Regards
    Sreekanth

  • Excise base value not updated

    Dear all,
    We have found that excise base value is not updated after creating excise invoices,later we corrected it,
    excise base value started updating in table J_1IEXCDTL,
    Intially for 2 months excise base value is not updated in table,
    Is there any problem will arise in future ?
    or
    How to solve this issue ?
    Jeyakanthan

    Awaiting valuable replies.....
    Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM

  • Updation of Excise Base Value in RG1 Register

    Dear All,
    I have maintained the Condition category as H in Condition Type. But still the Excise Base value is not getting updated in RG1 Register.
    Please help me out with the solution.
    Thanks
    Tanushree

    Hi Tanushree,
    R u working in Ecc 6.0 or in ZYG?
    To update the Excise Base value is in RG1 Register,wat u nid to do is assing Condition category as H.
    Thanks
    Kapil

  • J_1IRG23D Excise Duty Base Value is not Updated

    Hi all,
    while doing the Depot sales after Depot Excise Invoice J1IJ the Excise Duty Base Value is not updated in J1iDEPOTSTOCK1 (display depot stock) and also in table J_1IRG23D.

    hi
    check this SAP Notes
    1348970 Incorrect Ship to / Sold to party filled in J1IJ 11.06.2009
    1322071 RG23D entry deleted from J_1IRG23D in case of cancellations 16.04.2009
    1233836 Additional depot EI status set as 'C' for partial reference 20.03.2009
    1263061 J1IJ - material quantity conversion leads to rounding error

  • VOFM Condition base value not updating(Urgent)

    Hi All,
    I have created a Condition Base Value 901 for Sales Order in Transaction VOFM.
    Following is the code when I enter the Sorce text.
    FORM FRM_KOND_BASIS_901.
    *{   INSERT         DEVK901384                                        1
    DATA: XXKOMV TYPE KOMV,
          XAKOMV TYPE KOMV,
          VKAWRT LIKE KOMV-KAWRT.
    IF KOMP-VKAUS = 'YAB'.
    XXKOMV = XKOMV.
    CLEAR VKAWRT.
    LOOP AT XKOMV INTO XAKOMV WHERE KSCHL = 'YIPR'.
    IF XAKOMV-KAWRT > 0.
    VKAWRT = XAKOMV-KWERT.
    ENDIF.
    ENDLOOP.
    XKAWRT = VKAWRT.
    CLEAR XKOMV.
    XKOMV = XXKOMV.
    ENDIF.
    *}   INSERT
    ENDFORM.
    But this code is not updating the Condition screen for items condition value.
    Regards
    Vijai

    no, the code contains the logic to determine the base value, then the value has to be passed to xkwert.
    take some other base formula as template.
    pls. rewad if helpful
    Roberto

  • How base value update

    hi everyone.
    there is change in the tax procedure. see some vendor will give the discounts after basic+ excise duty. than discount than vat/ cst will come. how this should be configured in tax procedure.
    i have changed in the pricing procedure. it is working but it is not reflecting to the base value of the tax procedure. what the settings i have to do..
    Thanks and Regards
    santosh kumar

    Hi,
    Take a copy of RA01 in M/06 as YA01(as Discount) and keep it as following;
    Cond. class A Discount or surcharge
    Calculat.type A Percentage
    Cond.category Blank
    And Plus/minus - A (Positive)
    Use this in Pricing Procedure ( M/08 ) after Gross Price ad Discount conditions (before Subtotal) and assign Subtotal "6" against this condition type.
    In OBQ3 - Tax Procedure, assign AltCBV 363 to CST/VAT Condition Type (JIP1/JIP5)
    Now check the calculation will happen as following;
    Gross Price = 10000 INR
    Discount (as -ve/+ve) = 1000 INR
    BED 14% = 1400 INR
    ECS 2% = 28 INR
    SECess 1% = 14 INR
    CST 2% = 248.84 INR

  • Scale base value in rebate processing for CM /DM must not be updated

    I created a rebate condition type with calculation type A (percentage) and scale basis C (qty). The billing types for credit and debet memo are set relevant for rebate (TVFK-BORVF). The value of a credit / debet memo is added to the condition base value in the rebate agreement and the quantity to the scale base value (standard). For us it is not an option to create credit and debet memos without quantity. What I need is that the value is added to the condition base value but the quantity is not added to the scale base value. How can I achiev this?
    Example
    standard order   Qty 1100, value 11.000
    CM                      Qty 200, value 500
    Rebate agreement with scale
    0 to 1000    4%
    from 1000  5%
    The final settlement must calculate 5% over 10.500. Currently it calculating 4% over 10.500.
    Thanks in advance

    hi,
    check out the following link:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/de/5e74c39d3211d596fc0000e835339d/frameset.htm
    Regards,
    siddharth.

  • Excise base value is not changing in MIGO excise tab for Import  PO scenari

    Dear Gururs,
    We are using MIGO to capture & Post Excise Invoice for our Import PO (PO type ZIMP). the problem is, when we change the qty in MIGO Qty tab, corresponding base value is not getting update in Excise tab. we are not creating the planned cost mIRO directly we do the GRN.
    Please suggest a solution.
    Thanks
    Shital

    Hello Shital  ,
    You are using the India Scenario right?
    The issue can be because you have not assigned a zero tax code to the line item. For India please make the tax code field in PO as mandatory so that the user does not save the PO without atleast a zero tax code.
    Maintain the tax code & proceed. You will see the tab in MIGO.
    Regards
    Plauto

  • TAXINN - Base Value in Migo for the item is ZERO

    Hi,
    We are using TAXINN Tax Procedure.
    In MIGO Excise Item Tab, Base value is coming zero.  Also it is updating in Excise Registers 23A part I & 2.
    Can anybody tell me where i am doing a mistake.
    Thanks in advance
    KK

    Hi Bharat,
    Thank you very much for your quick response.
    It is not intra company STO.  This is normal procurement from the outside vendor. 
    Can you explain me why it is coming Zero
    Hope it is clear for you
    If you have any query, please do not hesitate to ask me
    Thanks in advance
    KK

  • Base Value not changing in MIGO Excise Tab

    Dear Gururs,
    We are using MIGO to capture & Post Excise Invoice for our Import PO (PO type ZIMP). the problem is, when we change the qty in MIGO Qty tab, corresponding base value is not getting update in Excise tab. Please suggest a solution.

    Hi,
    If you are doing a MIGO for Import consignment, duties are flow from Invoice booked thru MIRO, so doutful if you can change corresponding base value in MIGO.
    Regards,
    Vikas

  • Excise Base value is missing in ARE1

    Hi All,
    I am doing Export sale through u201CExports under claim of rebateu201D process, my customer currency is in USD (in CMR), and I have maintained condition record for price in USD, also I have maintained Exchange Rate in OB08.
    In ARE1 I could not found u201CExcise baseu201D value (blank), if I maintain the condition record in INR, I could found Excise base value, what could be the reason?
    Please suggest me that, how to bring the u201CExcise Baseu201D value in ARE1 if condition record for PR00 is in USD (CMR also maintained with USD)
    Regards,
    Ram

    Hi,
    Thank you for ur reply,
    I have checked in Table (Excise Invoice Item) J_1IEXCDTL , I could not found "Excise Base" value (no value), but, as I have already mentioned that, if I maintain the condition record for PR00 in INR, then it's updating Excise Base. Is there any solution for this? (if condition record in USD)
    For Excise Duties we  are doing the round off, this is also affecting while converting the values with Exchange rate i.e.USD to INR. (Differance in values) how to avoide this?
    Regards,
    Ram

  • Excise base value in ARE1 screen shows 0

    Dear Gurus
    Even after excise calculation has been made in the excise invoice, Excise base value field from which basic excise duty is calculated is showing 0 value in ARE1 screen while we do J1ia101. other values  such as BED, SHC are apperaing. Any ideas??
    regards
    Sidhu

    Hi
    Check whether the Excise base value is updating in the table J_1IEXCDTL.
    Check the note
    Note 1035545 - Excise base amount is not updated in table J_1IEXCDTL.*
    regards
    Prashanth

  • Scale base value with price discrepancy credit note

    Hi gurus,
    I have a problem in which credit notes for price discrepancies are having direct effect over scale base value in structure S060. I tried to modify the update rules, but found out this is hard coded for this structure. The other solution will be maybe to include a new pricing procedure and sales document just for discepancies, handling a fixed value condition type. Since the rebate which is experiencing the scale base value update is a quantity rebate I don´t know if it will have the desired effect.
    The question is:
    Is it possible to avoid the update to S060 through a user exit?
    I saw RV60AFZZ could be used, but I´m not really sure if it will work to avoid quantities update ?
    Thanks for your time and help.

    hi,
    check out the following link:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/de/5e74c39d3211d596fc0000e835339d/frameset.htm
    Regards,
    siddharth.

  • VOFM: Condition Base Value(Urgent)

    Hi All,
    I created  Condition Base Value and transported it with a breakpoint. In the revision I removed the breakpoint but there was syntax error so object was not imported and the error shown for transport was 8. In another try an error occured again. In last import, everything went fine but the condition base value include program is not updated. it is remianing in the last state.
    Do I need to do something extra or there is problem in the steps I am following.
    Regards
    Vijai

    Hi,
    Now make sure that break points are removed and activate the routine by running RV80HGEN program in SE38.After this transport the fresh request.
    Reward points if useful
    Regards,
    Amrish Purohit

Maybe you are looking for

  • Help needed in text entry box...

    hi, I have created one assessment simulation, which has a few text entry boxes. This I have included it in another flash file. Output of that flash file is .exe and not .swf.  But when I play that exe; this simulation doent allow to enter the text, w

  • Data filtering problem in ik07 transaction

    Hello experts, I've enhance the selection screen of IK07 by creating two select options by using BADI. Now i've to filter data according to the values enter in the  input fields of those enhance... So asking where to write the filtering logic for IK0

  • Strange Key Commands Issue - Please Help

    I understand how to make/delete and export key commands. I made a key command preference that I like that doesn't involve the screen set key commands ... herein lies the issue. I delete the commands (1,2,3,4,5,6,7,8,9) that are assigned to screen set

  • "Serial Number Not Found" and battery not charging

    Hi, I have a problem with my Compaq mini 110c 1030sf. It started a few months ago, when a weird red message appeared on the Compaq boot logo : "Serial Number Not Found". Everything was still working fine though, that's why I did not try to fix it. Ho

  • Why mysql soen't start when i launch EASYPHP?

    Could you gave me a explination to this and if my.ini is well written sachant que my host : 127.0.0.1 port 3306 username [email protected] password :naonetou I give you my.ini which ipath access is C:\Program Files (x86)\EasyPHP-DevServer-13.1VC9\bi