Update BP address

I am having a pickle of a time trying to update the Business Partner default Bill To address.
Which fields must I complete for this to work?
thx Rick

I imported last week 1500 BP, with Ship To codes and now want to update the Bill To codes. I am working in PL43
Here is the list of fields that I am trying to update,
RecordKey     CardCode     Address     BilltoDefault     BillToState     CardForeignName     CardName     CardType     City     Country     ZipCode
Which one am I missing? I keep on getting the succesfully updated message but when I look at the BP there is no information in the Default Bill To only the Define New appears.

Similar Messages

  • How do I update multiple addresses at once?

    I have a about 2 dozen entries in my address book for a particular company. Is there a way to update the address for all of the employees of that company at one time? It is very time consuming to go to each entry and type the address over and over again. The same would go for the fax number

    If you are not familiar with Applescript the simplest is probably to select them all (eg by putting the company name in the search box and selecting all found) export the selection as a vCard then delete the selection. Open the vCard in a text editor, do a global find/replace on the affected data, then import the vCard again.
    AK

  • How can I get the last updated email address of the customer ??

    Dear All,
    Please let me know, How can I get the last updated email address of the customer ??
    Also, I am trying to read CDHDR table where OBJECTCLAS is ADRESSE, however what value should be passed into OBJECTID field, looks like it is ADRNR with a Suffix BP.
    Please confirm me what value should be passed into OBJECTID field.
    Thank you.
    Anitha

    Hi Anitha,
      Check if this is something that helps you:
    Change documents in BAS
    CDHDR
    address type 1
    objectclass = ADRESSE             
    objectid = addrgroup + addrnumber     (ADRC-ADDR_GROUP + ADDRNNUMBER) !!
                     'BP  000xxxxxx'
    private address (address type 2)
    objectclass = ADRESSE2
    objectid =  'BP  000xxxxxx000yyyyyyy'   
                            persnumber+adrnr private
    address type 3
    objectclass = ADRESSE3
    objectid =  'BP  000xxxxxx000zzzzzzz'
                              persnumber +comp.address
    The above details is from the link: http://wiki.sdn.sap.com/wiki/display/ERPLO/LO-MD-BP
    Regards,
    Swarna Munukoti

  • I recently changed my email address and updated my password.  However, when I connect my iPhone 4 it defaults to my old email address which is no longer valid.  How do I get my phone to recognize my updated email address?

    I recently changed my email address and updated my password.  However, when I connect my iPhone 4 it defaults to my old email address which is no longer valid.  How do I get my phone to recognize my updated email address and how do I now change the iPhone 4 to recognize the new address?  I wish to delete all reference to the old address.  All help would be appreciated.

    Hi.
    Here is a procedure that should help.
    1. Go to "Settings"
    2. Go to "Mail, Contacts, Calendars"
    3. Click the account you don't want anymore
    4. Go to the bottom and click "Delete Account"
    5. Confirm the deletion
    6. Go back to "Mail, Contacts, Calendars" (if you're not there already)
    7. Add your new account

  • Update email address in vendor master using report RPRAPA00

    Hi All ,
    My requirement is to update email address in communication tab of vendor master .
    There is one report RPRAPA00 running in background to update vendor master except email .
    I could not able to see anything to update email address in user-exits available in report RPRAPA00.
    Is there any way to update email address using this report or any alternative way .
    Please help .
    Thanks and regards ,
    Sijin KP.

    You can use a couple of function modules from function group SZA0 to update the email address.
    Attached is a simple test program that inserts a new email address for a vendor whose address number is known (from LFA1-ADRNR):
    DATA: comtab TYPE STANDARD TABLE OF adsmtp WITH HEADER LINE.
    comtab-consnumber = '001'.
    comtab-flgdefault = 'X'.
    comtab-smtp_addr = 'email_address_comes_here'.
    comtab-dft_receiv = 'X'.
    comtab-valid_from = '00010101'.
    comtab-valid_to = '99991231'.
    comtab-updateflag = 'I'.
    APPEND comtab.
    CALL FUNCTION 'ADDR_COMM_MAINTAIN'
      EXPORTING
        address_number                       = '0000141306'
        table_type                           = 'ADSMTP'
      TABLES
        comm_table                           = comtab
    EXCEPTIONS
       parameter_error                      = 1
       address_not_exist                    = 2
       internal_error                       = 3
       OTHERS                               = 4
    IF sy-subrc NE 0.
      WRITE sy-subrc.
    ELSE.
      CALL FUNCTION 'ADDR_MEMORY_SAVE'
       EXCEPTIONS
         address_number_missing       = 1
         person_number_missing        = 2
         internal_error               = 3
         database_error               = 4
         reference_missing            = 5
         OTHERS                       = 6
      IF sy-subrc NE 0.
        WRITE sy-subrc.
      ENDIF.
    ENDIF.

  • Updating external address number and phone ID

    I want to update external address number and phone ID when i edit a BP.
    I found FM BUA_BUPA_BUT020_GET to read address data from buffer.. using this i can update external address number field. but i am not able to see phone related fields in buffer.
    how to update phone related fields in buffer ( in any of the BADI).

    Hi,
    You can get the information from the table ADRC   Addresses (Business Address Services)
    Field name for telephone number TEL_NUMBER
    For Email address
    SMTP_ADDR
    And you have the common field between these two tables
    ADDRNUMBER
    Thanks
    Ramakrishna Pathi

  • Updating email address in Sales order header partner address -VA01/VA02

    I got the requirement to update the email address in Sales order-> header-> partner address.
    The mail address will be picked from ZTABLE and updated in header partner address through user exit
    I cannot find any field for updating email address in partner address in user exit "MV45AFZZ"
    Is there any other user exit/option to update email address in header partner address of sales order?
    Thank You,
    GM

    Hi Rajesh,
    I agree with you but this Scenario is different.
    Just as you have mentioned the address change will not reflect in the Old Sales orders but it should in the new Sales orders right??
    But that is not happening..The Address was changed say two months back and the new address is not appearing in the Sales orders created these days say yesterday or today..
    In such a case,what is should I check to get the address updated??
    Please advice.
    Regards,
    Sophia Xavier

  • Script to Update SL Address Book with Lion Address Book?

    The only thing stopping me from switching from mobileme to icloud is my wife's imac, which is a little too old for Lion.  I have seen workarounds to sync calendars and mail, but not address books, via icloud.  Since it should be possible to export an address book from the Lion box and import it to the Snow Leopard box, perhaps that could be done automatically, once a day, using a script of some kind over my home network.  What would such a script look like?
    Any other ideas for periodically replacing/updating the address book on my wife's SL mac with the address book on my Lion mac(s)?

    The database probably won't do you any good: trying to replace it automatically is likely to fail as it's already in use.That at least was what I found.
    You could export the entire contacts list as a vCard, and import it into the other address book, though you would of course need to delete the entire list there first in order to prevent duplications.

  • Update equipment address

    I'm an ABAP developer and I'm trying to update equipment address (especially coordinates) in an ABAP program. I tried to debug CRM Web UI application and implement the same code in my program but it doesn't work.
    Basically I'm using function modules COM_IOBJ_LOCAT_ADDR_STORE, ADDR_SINGLE_SAVE and COM_COM_LOCAT_ADDR_SAVE_DB. Obviously I have something missing but I wasn't able to determine what's it.
    [Screenshot of WEB UI where I try to update (Accounts & Products > Equipments > Address)|http://i54.tinypic.com/2ev6kk5.jpg]

    Hi Ravi,
    If you are able to do it with GenIL/BOL..that would be the best. However, we prefer to use BOL only from WebUI. So, I hope you are using this only in WebUI Components, and not from any BAdI's or Proxy's.
    And the FM's/Classes should definitely work, from my experience.
    Did you try tracing all the FM's/Classes and the sequence being called...by doing your exercise manually?
    If not, you can try that...even your problem is solved, it would help you in future.
    Thanks,
    Sandeep

  • HT4623 I am doing the IOS 7.02 update to address security. THe IPAD is now asking me to plug in to ITunes. When I do this, my MAC is saying that the IPAD is in recovery mode and my data will be lost.  What happened?!!

    I was doing the IOS 7.0.2 update to address security. The IPad is now telling me to plug in to Itunes. When I do so, my MAC is saying the IPad is in recovery mode and my data will be lost. What happened?!!  How do i fix?

    Something went wrong with the update and you are in Recovery Mode.
    Follow the instructions below to recover your iPad.
    http://support.apple.com/kb/ht4097

  • HT5312 forgot answers for security questions, my apple account has updated email address but the rescue email address  for account is old and not accessible - do not know how to update that address so i can authorize new devices...

    forgot answers for security questions, my apple account has updated email address but the rescue email address  for account is old and not accessible - do not know how to update that address so i can authorize new devices...

    Welcome to the Apple Community.
    Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
    If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple throughiTunes Store Support.

  • App, email address is diferent from update email address, how can i make them the same ?

    app. email address is differant then update email address, how can i change my up date address to be the same ?

    The last time I received official word on this from Apple, I was told it is not possible to merge or otherwise change Apple ID's.
    Ours is not to reason why.

  • Update for Address Book

    When I downloaded the update 10.5.3, it said it would update my address book. I don't thin it did.
    It still says 2007 license and I can't sync with Google Contacts!
    Does anyone know what is wrong?

    The Address Book application in Mac OS X 10.5.3 now lets _*iPhone users*_ sync their Address Book with Google Contacts.
    If you aren't an iPhone owner, or you simply have reasons for not wanting to use this new solution, Syncman and Spanning Sync 2.0 (when it arrives) should still be viable options.
    Update
    General consensus from commenters says that if your machine has never touched an iPhone or iPod touch, you aren't likely to see this feature (just like Google stated).
    Do you have an iPhoto or an iPod Touch? according to the Google article his feature is only available if you do
    LN
    Message was edited by: LarryHN

  • Update oBP.Addresses

    Hi all,
    I have the following which updates the addresses in Business Partners.
                If strAddress_type = "Billing address" Then
                    oBP.CardCode = strUser_Id
                    oBP.CardName = strFull_name
                    oBP.UserFields.Fields.Item("U_username").Value = strUserName
                    oBP.EmailAddress = strUser_Email
                    oBP.FederalTaxID = strExtra_field_1 'VAT Nr or Tax ID
                    oBP.Addresses.AddressName = strAddress_1
                    oBP.Addresses.Street = strAddress_2
                    oBP.Addresses.City = strCity
                    oBP.Addresses.ZipCode = strZip
                    oBP.Addresses.AddressType = BoAddressType.bo_BillTo
                Else 'If it is Shipping Address
                    oBP.CardCode = strUser_Id
                    oBP.Addresses.AddressName = strAddress_1
                    oBP.Addresses.Street = strAddress_2
                    oBP.Addresses.City = strCity
                    oBP.Addresses.ZipCode = strZip
                    oBP.Addresses.AddressType = BoAddressType.bo_ShipTo
                End If
                rs2.DoQuery("SELECT COUNT(CARDCODE) FROM OCRD WHERE CARDCODE = '" & strUser_Id & "'") 'is an old customer?
                Dim z As Integer = rs2.Fields.Item(0).Value 'is an old customer?
                If z = 0 Then
                    'Create Business Partner
                    lretcode = oBP.Add
                Else
                    'Update Business Partner
                    lretcode = oBP.Update
                End If
    The problem is that when BP is updated with a new Shipping Address the Billing Address is deleted!!
    Any Idea?
    Thanks in advance
    Vangelis
    Edited by: Vangelis Kanellopoulos on Aug 12, 2010 7:14 AM

    Hello
    You should use SetCurrentline to position the address which would like to update...
    You can use the address name to find the address is exists or Not.
    Example from help with SetCurrentLine()
    bp.CardName = "C009"
    bp.CardCode = "C009"
    bp.CardType = SAPbobsCOM.BoCardTypes.cCustomer
    bp.Addresses.SetCurrentLine(0)
    bp.Addresses.AddressName = "Address1"
    bp.Addresses.Block = "1"
    bp.Addresses.Street = "street 1"
    bp.Addresses.City = "City 1"
    bp.Addresses.Country = "DE"
    bp.Addresses.AddressType = SAPbobsCOM.BoAddressType.bo_BillTo
    bp.Addresses.Add
    bp.Addresses.SetCurrentLine(1)
    bp.Addresses.AddressName = "Address2"
    bp.Addresses.Block = "2"
    bp.Addresses.Street = "street 2"
    bp.Addresses.City = "City 2"
    bp.Addresses.Country = "DE"
    bp.Addresses.AddressType = SAPbobsCOM.BoAddressType.bo_BillTo
    bp.Addresses.Add
    bp.Addresses.SetCurrentLine(2)
    bp.Addresses.AddressName = "Address3"
    bp.Addresses.Block = "3"
    bp.Addresses.Street = "street 3"
    bp.Addresses.City = "City 3"
    bp.Addresses.Country = "DE"
    bp.Addresses.AddressType = SAPbobsCOM.BoAddressType.bo_BillTo
    bp.Addresses.Add
    Regards
    János

  • Using LSMW to update customer address data via RFBIDE00

    Hi, I wonder if anybody has dealed with same issue for using LSMW with program RFBIDE00 to update customer address data.
    We need to update the customer address data in the central address management data. Since those fields do not exist in basic structure of BKNA1, for example, C/O name, street 2 to Street 5, I am putting the mapping of the source fields to map to BIADDR2. However, all the data I mapped to BIADDR2 is not updating in the customer records. When looking into the code of RFBIDE00, the codes will only transfer the data from BIADDR2 if the customer account group is marked as consumer which our case is just a sold to, ship to, not consumer.
    Does anybody have faced this issue before? Where should the exact central address data be mapped to in RFBIDE00?
    We are using ECC6.0. Any advise is appreciated.

    Found the answer from SDN - not possible unless using some BUS.
    RFBIDE00 - Address data issue
    Thread closed.

  • HT4910 I tried to update my address book on OS X6 with an abbu from my other computer which has Lion OS X 7.  It wiped my address book clean and I cannot retreive by Address book on my OS X 6 computer and saves out there?

    I tried to update my address book on OS X6 with an abbu from my other computer which has Lion OS X 7.  It wiped my address book clean and I cannot retreive by Address book on my OS X 6 computer and saves out there?

    blacksheepfibers wrote:
    I updated my mac with  os x Lion so that I could accomplish moving my address book from the mac to my new IPad 3G. I also set up an icloud account for this purpose, but I *still* cannot figure out how to move my address book from one computer to the other. When I'm on my mac and try to use bluetooth to export the address book, I'm able to find my ipad but I soon get a message that it does not support the necessary services. I have no idea what's going on and would appreciate any advice. tks in advance, Sarah
    The address book syncs via iCloud, not Bluetooth or iTunes.
    You upgraded to Lion so you could use iCoud.
    On the computer. go to Apple menu > System prefs > iCloud.
    Sign into your iCloud account.
    Tick everything.
    This enalbes the se items syncing to iCloud.
    On the iPad, Settings > Mail, Contacts, Calendars.
    Create a new iCloud account.
    Sign in with the same AppleID as your computer.
    Settings > iCloud and turn everything on.
    BAM!
    That is all you need to do.
    Your contacts (and all other checked items checked) will sync between computer and iPad.
    No need to use iTunes

Maybe you are looking for