Update check status in FPCHR (issued from FI-CA) using EBS

Hi All -
We are planning to use FI-CA for issuing checks to our customers. We are also planning to have EBS.
Based on my searching here is what I have found about how to make FI-CA checks and EBS work.
1. Enhance Event 0061 in FICA so the recon key for check run posts entries (documents) at an individual check level into FICO with all the details like the check number,
2. Enhance event FEB00001 so the R/3 FICO document can be cleared based on the EBS entries.
Now my two questions are
a). If the above two steps are done, will the status of the check in the FPCHR automatically get updated from open to cleared? Just like how FPB12 program in ISU does?  Will the encashment date etc get updated?
b). Are the above two steps still relevant since SAP seems to have made significant changes to EBS since 2008.
As always Thanks in Advance for spending your valuable time to answer.
Regards,

check this link  it might be helpful to you
http://help.sap.com/erp2005_ehp_05/helpdata/EN/0f/0a5241fce5830ae10000000a155106/frameset.htm
thanks,
VR

Similar Messages

  • Streaming Issues from Mac Pro using Apple TV

    I have recently purchased a Mac Book Pro with retina display and tried streaming content using my apple tv (3rd gen). The picture streams (providing my bluetooth is off) but the sound continuously stutter. Does anyone know how to fix this?

    Hello PaulKinger,
    Welcome to the Apple Support Communities!
    I understand that you are experiencing some performance issues with sound while using AirPlay between your Mac Pro and your Apple TV. To begin troubleshooting, I would suggest working through the steps outlined in the attached article. 
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
    Resolve performance issues with AirPlay or AirPlay Mirroring
    If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express.
    Try these suggestions:
    Ensure that other devices are not trying to stream to the same Apple TV at the same time.
    Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
    Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
    If possible, try to locate your Wi-Fi router in the same room as your iOS device and Apple TV.
    If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
    If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
    Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
    Have a great day,
    Joe

  • Update Lead Status on save of follow up opportunity using Action

    *I am exploring the possibility of updating the status of lead(preceding transaction) as "closed" on saving the follow up opportunity. Can we achieve this functionality using Methods in Action Profile?*

    Hi Amit,
    You can try calling 'CRM_STATUS_MAINTAIN_OW' Function Module on saving the followup opportunity.
    Cheers
    Ajay

  • Anyway to check status of restoring IPhone from Icloud?

    I am setting up an IPhone 6, by restoring from an ICloud backup of around 16 Gb.  It has been updating for almost 2 days, on constant WiFi.  Is there a way to check the status or see if there is an error?  I cannot update to the new OS either until the restore is complete.  Thanks for the feedback.

    Apple may be able to check at their end.  Since you have an iPhone 6 you are still within your free phone support window.  Try giving them a call: Contact Apple for support and service.  You will need to give them your serial number, which you can find on your phone in Settings>General>About.

  • Two JetDirects in one HP-5550dtn, how to check status of the card from the "other" network

    I have CLJ5550 connected to two distinct LAN.
    Card 1 is a J7934G installed in EIO1 slot connected to LAN1
    Card 2 is a J3113A installed in EIO2 slot connected to LAN2
    This setup seem to work, except I can not use the web interface on LAN2. (telnet is OK but network configured by DHCP so no porblem).
    Is it possible to check the status of card2 from  LAN1 some way?  I would prefer an snmp tool or just OID for the second interface from there I can figure. Or any scriptable (linux) probe. 
    What I have tried is snmpwalk (on a linux host) from LAN1 I only seem to get info on the first card no mention of either EIO or other interface, although there is info provided about storage RAM disk etc. And by the way, this is the same with the web interface I can only tell that Card2 installed but nothing about it's configuration. Before you ask, no I can not do the monitoring from LAN2 I do not "own" that part.
    Right now, I would be happy just to be able to know if the card2 connected and up... I am having problems related to LAN2 dropping off  (smart switch disabling port) We are trying to determine why. 
    If anyone have any suggestions, I can provide more detials as needed.
     Thanks,
    Gabor

    For ABAP case, ccBPM is required only for calling mapping (transform step). You can call method of standard message data retriver class in any custom ABAP mapping anywhere.

  • Updating playhead in Pro Tools (slave) from Logic (master) using MTC.

    Hey there,
    I have setup MIDI over LAN using the Audio MIDI Setup between two Macs and it works so far as when I hit play in Logic the Film in my Pro Tools picture machine seems to be in sync with the music coming from Logic. Questions:
    1) When nudging the playhead in Logic left and right the corresponding timecode changes are not updated on the Pro Tools machine until you hit play again in Logic. Is there any way Pro Tools can update it's play head, timecode values and picture as I nudge the Logic playhead without pressing play again? It would be great to nudge the Logic session by one frame and see the update in Pro Tools accordingly.
    2) When I hit play to stop the music in Logic the time code readings are not the same in each DAW how can this be remedied so that they are? Is something going wrong here? e.g. stopped @ 01:00:03:04 in Logic and Pro Tools reads 01:00:03:09.
    Using Pro Tools 9.05, Logic Studio 9.1.8 (64-bit).
    Thank you!
    Ben

    Ok after more testing I have managed to get this working using a direct midi connection between the 003 and the laptop (using a Edirol UM1 and the 003). Here is what I did.
    ProTools8LE as master running on MacPro:
    1. Setup->Session
    1a. Set the session start time to 00:00:00:00
    1b. Time code rate =25
    2. Setup->Peripherals
    2a. Synchronization - MTC reader Port: Digi 003, Port 1
    MTC Generator Port: Digi 003, Port 1
    3. Set session tempo (eg: 120bpm)
    4. Transport- hit the arrow on the right hand side of the transport window and select "Synchronization" then hit the GEN MTC button
    LOGIC slave running on Laptop.
    1. Connect MIDI i/o interface to ports on 003
    2. Set session tempo to match that in PT (120bpm)
    3. Settings->Synchronization
    Sync mode = MTC
    Auto Enable External Sync = yes
    Frame Rate = 25 (same as protools)
    Auto detect format of MTC = yes
    Bar position 1111 plays at SMPTE 00:00:00:00 (this matches the setting in PT)
    Thats it. This setup appears to be working on my rig. I still haven't got this to work over Network midi, and I still haven't got PT8LE and Logic 8 to work together on the same machine. Let me know how you go.

  • Update one table based on condition from another table using date ranges

    Hello!
    I have two tables:
    DateRange (consists of ranges of dates):
    StartDate            FinishDate
            Condition
    2014-01-02
          2014-01-03           true
    2014-01-03     
     2014-01-13          
    false
    2014-01-13      
    2014-01-14           true
    Calendar (consists of three-year dates):
    CalendarDate    IsParental
    2014-01-01
    2014-01-02
    2014-01-03
    2014-01-04
    2014-01-05
    2014-01-06
    2014-01-07
    2014-01-08
    2014-01-09
    2014-01-10
    I want to update table Calendar by setting  IsParental=1
      for those dates that are contained in table DateRange between
    StartDate and FinishDate AND Condition  IS TRUE.
    The query without loop should look similar to this but it works wrong:
    UPDATE
    Calendar
    SET IsParental = 1
     WHERE
    CalendarDate   BETWEEN
    (SELECT
    StartDate 
    FROM  DateRange
    WHERE Calendar.  CalendarDate   = DateRange. StartDate
               AND   
    (SELECT StartDate 
    FROM  DateRange
    WHERE Calendar.  CalendarDate   = DateRange. FinishDate
    AND Condition
     IS TRUE
    Is it possible to do without loop? Thank you for help!
    Anastasia

    Hi
    Please post DDL+DML next time :-)
    -- This is the DDL! create the database structure
    create table DateRange(
    StartDate DATE,
    FinishDate DATE,
    Condition BIT
    GO
    create table Calendar(
    CalendarDate DATE,
    IsParental BIT
    GO
    -- This is the DML (insert some sample data)
    insert DateRange
    values
    ('2014-01-02', '2014-01-03', 1),
    ('2014-01-03', '2014-01-13', 0),
    ('2014-01-13', '2014-01-14', 1)
    GO
    insert Calendar(CalendarDate)
    values
    ('2014-01-01'),
    ('2014-01-02'),
    ('2014-01-03'),
    ('2014-01-04'),
    ('2014-01-05'),
    ('2014-01-06'),
    ('2014-01-07'),
    ('2014-01-08'),
    ('2014-01-09'),
    ('2014-01-10')
    select * from DateRange
    select * from Calendar
    GO
    -- This is the solution
    select CalendarDate
    from Calendar C
    where EXISTS (
    select C.CalendarDate
    FROM DateRange D
    where C.CalendarDate between D.StartDate and D.FinishDate and D.Condition = 1
    UPDATE Calendar
    SET IsParental = 1
    from Calendar C
    where EXISTS (
    select C.CalendarDate
    FROM DateRange D
    where C.CalendarDate between D.StartDate and D.FinishDate and D.Condition = 1
    [Personal Site] [Blog] [Facebook]

  • Playback issues from files compressed using the Divx Encoder

    Hey there,
    As the title implies, Im trying to edit Hypercam screen capture footage that was compressed with the Divx encoder it comes with.
    The footage then gets exported to an .avi format, and in windows it plays fine, HOWEVER, when I import the footage into premiere, all manner of horrible things happen, I have imported different footage encoded to the same format with no issues however. Has anyone else had an issue similar to this?
    the Rig:
    2.4 quad core
    3 gbyte of ram
    nvidia 8800 gts driver vers 182.xx
    Thanks

    If it is possible to NOT use the DivX CODEC, jump at that opportunity. It is a delivery format, pure and simple, and is not meant to edit, and does not edit well.
    Eddie's links will cover converting, but quality will be very poor.
    When faced with this CODEC, I use DigitalMedia Converter (~US$50), and it handles it fine. It just does not improve the quality, one iota. If there is no way around DivX (or Xvid), I can recommend the above. One must have the DivX CODEC (free) installed, but it sounds like you do. BTW, per Eddie's link, you WILL want to convert to DV-AVI Type II with PCM/WAV 48KHz 16-bit Audio. Again, you will need the MS DV CODEC installed, but most systems have this already.
    Good luck,
    Hunt

  • How to update Activity Status in PS

    Dear Sir,
    We have defined various Activities under a WBS Element .  Instead of Updating the Status of the Activity from the CJ20n screen , We want to confirm the Activities using a Z program ( utilizing BAPI etc ... ) . 
    Kindly guide us about the steps need to be followed for the same pl .
    With Thanks and Rgds
    S Agarwal

    you can use BAP to confirm, write LSMW via transaction CN25 or write a Z program via CN25 or CN22 to update status etc

  • Issue In Task List, When I select any SP13 task item its updating task status to "Completed" automatically

    Hi Guys,
    A strange issue I am facing in SharePoint 2013 task list. When I just select any task its updated the task status automatically to "Completed". When I unselect task its updated task status to "Not Started" automatically. I don't know
    why its happening.

    Hi,
    It is by design in SharePoint 2013, you can quickly mark tasks as complete by clicking the checkbox.
    If you want to select the item, please check the “select” column.
    Select Items:
    Mark task complete: 
    More information:
    http://blogs.office.com/2012/08/13/managing-tasks-in-sharepoint/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • SC should disappear from check status transaction

    Hello Colleagues,
    Can you please answer me the below query.
    ISSUE:
    Employee  creates SC.
    SC goen into sourcing cockpit.
    Purchaser completes sourcing and creates a contract.
    SO I feel for the employee his job is complete.But still i can see the SC in the check status for the employee.
    This does not make any sence and is very confusing for the employee.
    It makes sence for the purchaser to see the SC in check staus but not employee.
    How can i restrict the display of SC'c with the contract created out of it..not visible in the check status for the employee.
    Looking forward for your valuable inputs.
    Thanks & Regards,
    Kavitha.

    Hi
    Hi
    My question what the end user can do with the contract number information. please expain the customer what ae the functionalit he may miss if check status hidden.
    There are so many functionality of Check status you may miss if you hide.
    If it is very critical business requirement from customer you can think of to hide only follow on document folder rather than whole cart.
    In the Check Status application, you can check the status of your shopping cart and check the status of the individual items in your shopping cart.
    You can search for your shopping cart using various criteria, such as shopping cart name, creation timeframe, or status. You can search using the following extended statuses.
    You can not print a cart.
    See check status  functionalities of shopping cart
    http://help.sap.com/saphelp_srm30/helpdata/en/8b/4fa9495db211d2b404006094b92d37/content.htm
    so if your shopping created a follow on document
    BUS2000113 - business object - Contract
    then you are trying to protect acesss for this transaction
    bbpsc04
    or
    try to hide a follow on document instead hiding whole cart.
    but try to convince the user the important functionality of the Check status.
    br
    Muthu

  • Performing check and potential update for status control table

    Cheers Experts,
    I searched in the forum, but I didn't find an answer.
    I'm working on a 3.0B BW system.
    After updating from PSA to an ODS, in the log I see the following line:
    "Performing check and potential update for status control table" and double clicking on it, it says:
    If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in  the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
    This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
    The system now analyzes the requests in the Cube and compares the calculated status with the status table.
    If deviations from the status table arise then you are given the option of adjusting the status table.                                         
    I have 2 questions:
    1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
    2) What can I do to reduce its execution time, since it lasts several minutes?
    Thanks and greetings.
    Roberto

    Roberto, did you ever find an answer to your question?  We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

  • Big problems stemming from Google Update Checker -- any ideas?

    Hello,
    My computer is having severe issues after receiving an error message involving Google Update Checker. Please let me know if you have any idea how to solve my problems!
    So yesterday while working on my computer with many programs running (Finder, Safari, Firefox, X11, Matlab, Mail, Bibdesk, TexShop, Desktop Manager, RSS Menu, possibly others) I received an Error Message saying close the following:
    "The Google program Google Update Checker has quit unexpectedly. A report has been made and is ready to be sent", with options to "cancel" or "send report".
    At first, I clicked cancel. Between 30-60 minutes later I received the same message, I pressed cancel, then again, and I pressed "send report". I restarted, shut down then restarted, restarted again and still received the message. Long story short, I kept getting the same error message every half hour or so.
    Finally I went to Applications and manually put "Google Update" in the trash, since the only google software that I explicitly know of on my computer is Google Earth and Gmail Checker, neither of which I had run recently. This turned out to be a good idea, and now Finder continually stops responding and relaunches. It does so frequently enough that I am unable to open the trash to restore the Google Update app, or a finder window at all. Additionally, using Activity Monitor it says that FInder is using 99% of my CPU.
    I tried to restart it in safe mode by holding down "Shift" when booting, but OS X never booted in this circumstance.
    Any help on this matter would be greatly, greatly appreciated.
    Thanks in advance,
    -Patrick

    BDAqua,
    Thanks for setting me straight on the dual cores
    I went ahead and created a new Admin account. When I logged in with that account I had zero problems and everything behaved beautifully. I checked the "login items" on this account and none were present, so I went back to my normal account and removed login items (nine total) one by one, logging out and logging back in between each try. Even with no "login items" present, the problem persisted.
    I went back to Activity Monitor to check which processes were running, and saw the following:
    Activity Monitor
    SystemUIServer
    UniversalAccess.app
    loginwindow
    ATSServer
    pbs
    mdimport
    launchd
    Google Update Helper
    I logged back out and logged into the diagnostic account (again, no problems with Finder) and checked the Active Processes. There were the exact same processes running in that case, too.
    When I opened Console, Finder was already doing its crashing routine, so here is a tiny tidbit from the Console:
    {quote}
    2008-09-13 00:54:25 -0700
    2008-09-13 00:54:26.496 SystemUIServer[957] lang is:en
    Sep 13 00:54:26 computer-name crashdump[963]: Finder crashed
    Sep 13 00:54:28 computer-name crashdump[963]: crash report written to: /Users/username/Library/Logs/CrashReporter/Finder.crash.log
    Sep 13 00:54:29 computer-name crashdump[967]: Finder crashed
    Sep 13 00:54:29 computer-name crashdump[967]: crash report written to: /Users/username/Library/Logs/CrashReporter/Finder.crash.log
    Sep 13 00:54:30 computer-name crashdump[969]: Finder crashed
    Sep 13 00:54:30 computer-name crashdump[969]: crash report written to: /Users/username/Library/Logs/CrashReporter/Finder.crash.log
    2008-09-13 00:54:31.034 Finder[970] * +[NSCFString objectForKey:]: selector not recognized
    2008-09-13 00:54:31.034 Finder[970] * Uncaught exception: <NSInvalidArgumentException> >* +[NSCFString objectForKey:]: selector not recognized
    Sep 13 00:54:31 computer-name crashdump[971]: Finder crashed
    Sep 13 00:54:31 computer-name crashdump[971]: crash report written to: /Users/username/Library/Logs/CrashReporter/Finder.crash.log
    Finder(972,0xafe4c000) malloc: * error for object 0x67f180: incorrect checksum for freed object - object was probably modified after being freed, break at szone_error to debug
    Finder(972,0xafe4c000) malloc: * set a breakpoint in szone_error to debug
    Finder(972,0xafe4c000) malloc: * error for object 0x62c840: double free
    Finder(972,0xafe4c000) malloc: * set a breakpoint in szone_error to debug
    Finder(972,0xafe4c000) malloc: * error for object 0x62c840: incorrect checksum for freed object - object was probably modified after being freed, break at szone_error to debug
    Finder(972,0xafe4c000) malloc: * set a breakpoint in szone_error to debug
    Sep 13 00:54:32 computer-name crashdump[973]: Finder crashed
    Sep 13 00:54:32 computer-name crashdump[973]: crash report written to: /Users/username/Library/Logs/CrashReporter/Finder.crash.log
    Looks pretty ugly to this amateur eye...

  • Can anyone help me: How to check or update my status as SAP Certified Consultant / How to get my SAP Certificate ID Validated. - Reg.

    Dear Concern / All,
    Greetings of the day !!!
    I am an Indian. I have applied / booked for SAP Certification examination through PearsonVUE and the test centre was in Dubai.
    I have appeared and cleared SAP Certification Exam in the month of March, 2014 and received my SAP Global Certification which certifies me as "SAP Certified Application Associate" along with the Certificate ID after 4 weeks.
    I am seeking support / information / help for the below mentioned:
    How or where can I verify my SAP Certification details?
    How or where can I validate / update my SAP Certification details?
    How or where can I update my status as SAP Certified Consultant?
    Where or how can I get SAP Logo?
    I would be very thankful for extending your kind support / information / help in this regard.
    With Regards and Thanks in Advance
    Abhiman Surineni

    HI abhiman,
    How or where can I verify my SAP Certification details?
    Pearson VUE - Authenticate Score Report  --- go to this link and give your details and for
    How or where can I validate / update my SAP Certification details?
    Pearson VUE - Authenticate Score Report --- go to this link and give your details same link
    How or where can I update my status as SAP Certified Consultant?
    Pearson VUE - Authenticate Score Report --- go to this link and check once .... after 1 month the address which you have for pearson vue  and address details of you all your SAP certificates will reach you in 1 month to your postal address.
    Where or how can I get SAP Logo?
    Previously there is one person names Kenneth , he will issuing the SAP LOGO for certified consultants but now you can contact [email protected] they will issue you the logo if possible
    you will get all your documents and certification within short time , so no need to worry ...All the best and Good luck for your SAP carrer.
    Thank you.

  • Why is it when i update my status on facebook from iohone it splits the updates into two differents boxes with some funky symbol. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app.

    why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK  i have already update my phone too.
    if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload,  . But its a pain of not using my IPHONE APP for facebook cause it does that.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Maybe you are looking for