Update debugger is not working

Hi All,
My problem is "Update debugger is not working" is not working.
In VA02,  I am creating a EDI output type, before saving it i am going into debug mode activating the 'Update Debugger'.
But after that a message is coming as 'Update debugging has been triggered' but debugger screen is not coming up.
Please let me if you have inputs on this.
Thanks
Satyamkumar Jha

>
Satyamkumar Jha wrote:
> Hi Saravraj ,
>
> Even if 1 session is opened then also it is not going for update debugging.
>
> Thanks
> Satyam
Did you check if a COMMIT statement is getting triggered(you can do that by placing a break point in the debugger at the statement COMMIT)? Click on F5 once the control reaches COMMIT statment and wait for a new session to
get opened for debugging.
Not sure, about the debugger that you are using(classical/New),  lately, I have faced issues with update debugging while using new debugger, it would be a good idea to cross-check in classical debugger.
-Rajesh.

Similar Messages

  • After doing a widows update itunes will not work at all

    after doing a widows update itunes will not work at all

    hiya!
    I get the itunes has encounterd a problem and needs to close, sorry for the inconvenience error, no specific error number. I do not have QT installed,
    not having QT installed is what will be causing your itunes error message at the moment. let's try a careful standalone QT 7.1 install.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
    love, b

  • Update process does not work on Tabular Form

    Hello,
    I have 2 tabular forms on one page, which are using manual update processes.
    First form is created using wizard, and therefore works perfectly.
    The update process is as follows:
    DECLARE
      lc_string VARCHAR2(4000);
    BEGIN
      FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
      LOOP
         lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
      END LOOP;
      --Database processing using the concatenated string here
    END;Second form is created manually, using the following code:
    SELECT apex_item.checkbox (30,
                               '#ROWNUM#',
                               'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
                               NULL,
                               'f30_' || '#ROWNUM#'
                              ) delete_checkbox,
           CATALOG_ID,
              apex_item.hidden (31, CATALOG_ID)
           || apex_item.text (32,
                              LANG,
                              80,
                              100,
                              'style="width:100px"',
                              'f32_' || '#ROWNUM#'
           || apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
           apex_item.text (34,
                           DESCRIPTION,
                           80,
                           100,
                           'style="width:255px"',
                           'f34_' || '#ROWNUM#'
                          ) DESCRIPTION
      FROM V_CATALOGS
    UNION ALL
    SELECT     apex_item.checkbox
                              (30,
                               TO_NUMBER(9900 + LEVEL),
                               'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
                               NULL,
                               'f30_' || TO_NUMBER (9900 + LEVEL)
                              ) delete_checkbox,
               NULL,
                  apex_item.hidden (31, NULL)
               || apex_item.text (32,
                                  NULL,
                                  80,
                                  100,
                                  'style="width:100px"',
                                  'f32_' || TO_NUMBER (9900 + LEVEL)
               || apex_item.hidden (33, NULL) LANG,
               apex_item.text
                                               (34,
                                                NULL,
                                                80,
                                                100,
                                                'style="width:255px" '  ,
                                                'f34_'
                                                || TO_NUMBER (9900 + LEVEL)
                                               ) DESCRIPTION
          FROM DUAL
         WHERE :P18_TEMP = 'ADD_ROWS1'
    CONNECT BY LEVEL <= 1However, the update process does not work on this form.
    I created it using the first one as an example, but with the id's of the second form:
    DECLARE
      lc_string VARCHAR2(4000);
    BEGIN
      FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
      LOOP
         lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
      END LOOP;
      --Database processing using the concatenated string here
    END;Also, both forms are opening in a modal pop-up dialog window.
    I use a Dialog Region plug-in for that.
    Please advise, what is causing a problem with update?

    Sloger,
    if this is your tabular form
    SELECT apex_item.checkbox (30,
    ...and this is your update statement
    FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
    ...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
    Thanks,
    Tyson Jouglet

  • Update Panel is not working browsers other than IE

    In SharePoint 2013, Update Panel is not working for firefox, chrome etc.

    Hi,
    From your description, my understanding is that you use
    <asp:UpdatePanel>tag in your code, but it does not work well in browsers except
    IE.
    I have test
    <asp:UpdatePanel>tag with code below, and it works well in IE, chrome, Firefox
    as the screenshot.
    <asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional" ChildrenAsTriggers="true">
    <ContentTemplate>
    <asp:Label ID="lbl" runat="server" Text="Loaded" Visible="true"></asp:Label>
    <asp:Button ID="btn" runat="server" OnClick="btn_Click"/>
    </ContentTemplate>
    </asp:UpdatePanel>
    protected void btn_Click(object sender, EventArgs e)
    lbl.Text = "BUTTON CLICKED !";
    lbl.Visible = true;
    The screenshot below is my result(the first is result in Chrome, second is in Firefox and last is in IE):
    And you also could refer to this article:
    http://sharepoint.stackexchange.com/questions/72928/update-panel-not-working-in-firefox-2013
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

    My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • After doing last Mavericks update, Messages is not working properly

    Since yesterday, after doing last Mavericks update, Messages is not working properly - the Dock icon is not bouncing nor showing any number for new messages. Very annoying, since I usually have Messages on background while working and I now i don't realize if people is chatting me unless I open the messages wondows.

    Hi,
    Check System Preferences > Notification is set for Messages
    In Messages > Preferences > General Section change the Sound option for Message Received.
    Restart the app and test this sound is (still) playing.
    Place app in background an iMessages "yourself" form your iPhone.
    Does the sound Play ?
    10:18 pm      Wednesday; November 13, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How do I uninstall the iPhoto update which does not work on maverick?

    How do I uninstall the iphoto update which does not work. ie it tells me my library is locked out and the recommended action by apple does not open the phot library first aid. ? i need to go back to the old iphoto.

    Terence, I was trying a way to message you directly - jumping on a recent thread seemed to be the only way (sorry, DEW45). 
    Terence, you seem to be the foremost expert on apeture and iphoto and have helped me many times in the past (thanks).  I have a question that you may be able to help with (anyone also feel free to take a stab).  I use blogger to upload my photos and host my blog (www.sippingespresso.com).  I spend hours organzing and editing photos - namely, I will enhance and sometimes alter an image in Apeture.  It always saves over the orginal file (at least for viewing purposes), which is fine by me.  But then when I go to upload the photos onto blogger it seems to always pull my dull, original image.  Obviously, I want the newer, bright, enhanced photo.
    I'm one step away from importing them, dragging them out of iphoto and into Photoshop, then editing the files and dragging them back into iphoto, deleting the originals and uploading from there.  There HAS to be a better way - please help!!  I've already posted far too many boring images without the beauty of Apeture's "auto enhance".
    Thanks in advance, Terence or anyone else. 

  • App store, Safari, software updates, icloud, do not work in Mavericks 10.9 using a proxy server

    App store, Safari, software updates, icloud, do not work in Mavericks 10.9. these problems are interrelated I am sure. Apple apps were working fine in 10.8.5 I could do software updates through a proxy server using password authentication. I reinstalled a new system 10.9 on another partition and it won't let me use Safari or update software using a proxy server. Firefox works fine (I am using it to post). I am very disappointed that this wasn not fully tested BEFORE releasing Mavericks. Any solutions would be greatly appreciated.

    I had this problem myself.
    Checked the system log with Console, and I found the entry:-
    Nov 11 11:16:41 teds-new-mac.ad.mycompany.co.uk ocspd[537]: Authentication challenge received for "10.203.39.212:8080", unable to obtain proxy server credential from System keychain.
    For some unknown reason, Mavericks seems to be looking in the System keychain, when these credentials are actually held in the Login keychain.
    So, I tried "Copy & Paste"  - copying the https user name & password from the Login keychain and pasting into the System keychain, which worked but it's not quite as straightforward as I initially thought.
    Pasting into the System Keychain was, I found a not-very-intuitive process:
    Having opened your Login Keychain, click once on the item to be copied and when it's highlighted, select "Copy" from the Edit menu or, of course, cmd+c.
    Select the System Keychain:- DO NOT CLICK THE PADLOCK IN THE TOP LEFT TO UNLOCK IT.
    From the Edit menu, select "Paste" or cmd+v.
    You will then get a dialogue box,, enter your administrator's password and select "Modify Keychain" or just hit return, as it's the default entry.
    I found a restart was in order before it recognised everything and would accept https pages without alert boxes, but YMMV.
    Funnily enough - and this is where it seems counter-intuitive, if you do click on the padlock and unlock the System Keychain, "Paste" is greyed out in the Edit menu and cmd+v has no effect.
    Exactly the opposite to what I'd expect..

  • HT4623 how to update to ios 6.1 when my update software is not working

    I have iPhone 4s how to update to ios 6.1 when my update software is not working when I click software updates the gear is turning and there is a message downloading and estimating time remaining but I stays like that for two days now nothing is happening what can I do?

    MICHAEL MI IPOD ES 4 Y TAMBIEN QUIERO DESCARGAR IO7 PERO ME MARCA ITUNES QUE EL IO7 ES UN BETTA Y EL 21 DE SEP ITUNES BUSCARA UNA ACTUALIZACIO DE SOFTWARE DE IOS Y EL QUE SIGUE ES EL 6.1.3 Y LUEGO EL 7.0 DESPUES EL IOS X Y DESPUES EL IOS 7.1.2 MI DUDA ES CON CUAL SE VA ACTUALIZAR MI IPOD4 EL 21 DE SEPTIEMBRE

  • Looks like updates via the App. store update option is not working again. Comments?

    Looks like updates via the App. store update option is not working again. Comments?

    There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
    Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

  • Lenovo System Update 5 does not work on my B580

    Hello,
    the Lenovo System Update 5 program does not work on my B580 laptop.
    After 16% of the status bar the program says "there are no packages for your PC".
    That can't be true, because i haven't installed all drivers and programs.
    I got .NET Framework 4 on my laptop.
    What will solve the problem?
    Greetings from germany
    MAD3000

    i also have the same problem with my B480

  • After full system update ppp does not work anymore

    Well, I have this problem:
    1) I install Arch Linux from the latest Core
    2) I manually install the latest versions of wvdial and its dependences (xplc and wvstreams). This is an offline installation (because I can't set up internet without wvdial. So I save these packages on USB drive, and there I lanch pacman -U *.pkg.tar.gz)
    3) I set up my GPRS internet connection (I use a mobile phone)
    Everything works well (i.e.: I can ping google without problem).
    Problems arise if I decide to update my system. In this case, indeed, after updating and rebooting, my connection doesn't work no more. Everything works fine until I update. After update, I can say hello to my ppp.
    Then, I add some some details.
    These are the last lines of messages.log after a successful connection (i.e.: before the full update of my system)
    pl2303 4-2:1.0: pl2303 converter detected
    usb 4.2: pl2303 now attached to ttyUSB0
    usbcore: registered new interface driver pl2303
    pl2303: prolific pl2303 USB to serial adaptor driver
    PPP generic driver version 2.4.2
    NET: registered protocol family 10
    lo: disabled privacy extensions
    pppd 2.4.5 started by root, uid 0
    using interface ppp0
    connect ppp <-> /dev/ttyUSB0
    PAP authenticate suceed
    PPP BSD compression module registered
    PPP deflate compression module registered
    local IP address ...
    remote ID address ...
    primary DNS address ...
    secondary DNS address ...
    The last lines of messages.log after the update are:
    pl2303 4-2:1.0: pl2303 converter detected
    usb 4.2: pl2303 now attached to ttyUSB0
    usbcore: registered new interface driver pl2303
    pl2303: prolific pl2303 USB to serial adaptor driver
    PPP generic driver version 2.4.2
    NET: registered protocol family 10
    lo: disabled privacy extensions
    pppd 2.4.5 started by root, uid 0
    As you can see, it's seems there are problems in "using ppp0 interface". Indeed, pppd starts, but ppp0 interface not. I can also add that ifconfig ppp0 up and similar commands do not work (ppp0: no such device, or something like that).
    So, what can I do?

    I don't use ppp so this is just a guess.  However, after a recent upgrade I saw a message from pacman:
    [2010-02-14 09:07] >>> The kernel-mode plugin has a new place.
    [2010-02-14 09:07] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
    [2010-02-14 09:07] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
    [2010-02-14 09:07] upgraded rp-pppoe (3.10-2 -> 3.10-4)
    Could this be the problem?
    Last edited by loafer (2010-02-23 20:01:29)

  • I want to know, why the update process of firefox is not work correctly. Because of i begin update that is not work for along time(Connecting to the update server). So why should i do this problem. Please help me.

    Update process is not work

    See:
    * [[Software Update Failed]]
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder.<br />
    You may need to delete active-update.xml and updates.xml as well if present.
    C:\Users\&lt;user&gt;\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

  • Running Function Module in Background with Update Task is not working

    Hello Friends,
    I have a "Z" Report Program where I am running this Report in Background using JOB_OPEN, JOB_SUBMIT, JOB_CLOSE. I am calling this in BADI.
    In this Report I am calling another Function Module PRICES_POST which is a standard Function Module and in this FM there is another FM 'CKML_UPDATE_MATERIAL_PRICE IN UPDATE TASK'. Now when I am running the BADI these values are not being updated.
    Friends I would like to know whether can we run Function Modules which are  included with UPDATE TASK as Background Job program?
    Kindly help me in providing your valuable suggestions in proceeding further.
    Thanks and Regards
    Pradeep Goli

    Usually the sequence of CALLs in your report should look like
      CALL FUNCTION 'CM_F_INITIALIZE'
        EXPORTING
          msg_on_screen = c_x.
      CALL FUNCTION 'CKMS_BUFFER_REFRESH_COMPLETE'.
      CALL FUNCTION 'PRICES_CHANGE'
        EXPORTING
          actual_bdatj = f_matpr-pp-bdatj
          actual_poper = f_matpr-pp-poper
          bukrs        = p_bukrs
          budat        = p_date
          xblnr        = p_xblnr
        TABLES
          t_matpr      = t_matpr.
      READ TABLE t_matpr WITH KEY pp-xerror = ' '
                                TRANSPORTING NO FIELDS.
      IF sy-subrc <> 0.
        MESSAGE i046(ckprch).
      ELSE.
        CALL FUNCTION 'PRICES_POST'
          EXPORTING
            i_bktxt    = p_bktxt
            bukrs      = p_bukrs
            lis_update = 'X'
          TABLES
            t_matpr    = t_matpr.
      ENDIF.
      COMMIT WORK.
    If you forget the COMMIT-WORK each and every FM called in UPDATE TASK will not be triggered.
    Regards,
    Raymond

  • Update Software does not work anymore...

    two days ago i`ve tried to download updates from software update option on Mac OS X 10.5.2 and then it tells me that: you`re not connected to the internet, try again later...
    when i come home from work, ive tried again and then the update software tells me that i have new updates but does not appear any updates and i cant select Install option too.
    anyone who knows anything about it,
    please help me
    macbook core2duo 2ghz
    2gb ram
    80hd
    mac os x 10.5.2

    two days ago i`ve tried to download updates from software update option on Mac OS X 10.5.2 and then it tells me that: you`re not connected to the internet, try again later...
    when i come home from work, ive tried again and then the update software tells me that i have new updates but does not appear any updates and i cant select Install option too.
    anyone who knows anything about it,
    please help me
    macbook core2duo 2ghz
    2gb ram
    80hd
    mac os x 10.5.2

Maybe you are looking for