Update error and i didnt back up data

i clicked "Download" for the iOS 8.3, everything goes great until it itunes banner says " Waiting for iPhone". THen i get a pop up saying "error (-1)" and they redirect me to the itunes page where it helps with the majority of the problems, but apparently not mine because if done everything that page says and it still ont update. Now that i try to turn on my phone, not plugged in, it tells me to plug it into itunes. Sadly, since my computer has low space as it is, i dont back up my phone so i dont want to restore it back into factory settings. Please help!

Your phone is in recovery mode and there is no option other than to restore. Any data still on your phone will be lost. If you have no backup to restore, SOL. Why aren't you using iCloud backups??

Similar Messages

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster.

I have the first iPad, and it keeps crashing no matter what program(safari) app (iTunes) or game I use. I check the updates regularly and I'm up to date. Why does it keep crashing and how can I fix it?

I have the first iPad (which is considered ancient). I'll open safari and no matter what I'm searching after a few minutes it crashes (it will close safari and bring me back to the main app screen). The last few days I've been searching song on iTunes, and I have the same issue. It closes my iTunes and brings me to the main app screen.
I have checked my updates and everything is current for this iPad. It's a 64gb iPad with 54gb of available space so I know it's not a storage issue.
Does anyone have some pointers on how to keep it from crashing all the time?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808

AIR auto update error, and question about POST parameters

Hello,
I'm getting a Download Failed error in the AIR autoupdating process;
There was an error downloading the update. Error# 16822
I recall this working once, the very first time that I tried it.
My app.xml file contains this line:
    <version>12</version>
and my update.xml file contains:
<update xmlns="http://ns.adobe.com/air/framework/update/description/1.0">
<version>12</version>
<url>http:/players.biemedia.com/ooyala/Composer/Composer.air</url>
<description>12 - Bug fixes and prepopulating defaults for player creation screen</description>
</update>
Pasting the URL into a browser works.
However, this stuffresides on cloudfront. in the past i have noticed that if something tries to send post parameters along with the request, cloudfront will deny the request. Is it possible that the AIR app is sending POST parameters when hitting the download URL, and could this behavior be new in the last 6 months or so?
Any other ideas?
Thanks,
Gerry

Just Got The Solution for Error 16811 & 16816
Note Following things to avoide update error
No 1.>
You xml schema for update descriptor.xml in server should look similar to this
<?xml version="1.0" encoding="utf-8"?>
<update xmlns="http://ns.adobe.com/air/framework/update/description/2.5">
<versionNumber>2.0</versionNumber>
<url>http://localhost/SerialHunter/SerialHunter.air</url>
<description><![CDATA[
SerialHunter Version 2.0 by Rajendra Khope
This new version includes:
    * AutoUpdate
    * Enhaced UI functions
    * Ability to add providers
]]></description>
</update>
Note xmlns="http://ns.adobe.com/air/framework/update/description/2.5"
and versionNumber instead of version
Also make similar changes in appxml version field (in Burrito its by default versionNumber )
No 2>
if u are using code to display veesion number make sure it should look like:
var appXML:XML = NativeApplication.nativeApplication.applicationDescriptor;
var ns:Namespace = appXML.namespace();
pnlMain.title=appXML.ns::name+" v "+appXML.ns::versionNumber
Thats it...!
Rajendra Khope
bkrajendra at gmail dot com

Updating Q and P table of master data using ABAP program

Hi All
I have a requirement to update Q and P table(non key and non date fields) of master data using an ABAP program.
Is this something recommended?
Will there be any issues if I do that?
Thanks
Deepak

Thanks Vikram. Ok. My look up is on some other master data Q table and that is the reason why I asked about ABAP custom program.
Look like I will have to do the following approach.
Load the required supporting master data to BW.
Execute Attribute change run process for those master data objects.
Load the actual master data and look up on supporting master data.
Execute attribute change run process.
This process takes me long time and I am trying to reduce the overall execution time. let me know if you have some good suggestions.
Thanks
Deepak

Cloud Update: Error and auto unistall

Hi Team,
My PC wanted to do an update this morning for the cloud platform (Desktop). I said OK. It went through the update process and at the end it came up with an error. I didn't have time to chase this so I went cancel.
Cloud desktop has now looks to have disappeared and uninstalled its self!
Any thoughts

Hello. There is two way to solve this problem.
1) load adobe cleaner tool - (instructions and download links here http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) - run it with clean all option and make new install of cloud and all soft in it after installation. And be patient - with 40 Mbit internet channel and near top PC with i7-3770K 32 gb ram and fast SLC SSD - installation just Photoshop CC took 2 or 3 hours.
2) if all software is working fine just forget about this piece of buggy code.
Two weeks ago I finally made first option. And yesterday got same problem again. And im tired of it. Really tired. may be someone could make special lock on gas tank for all Adobe developers cars - and if they want to fill it with fuel - thay must call to service that they send someone with key to gas station. Until they couldnt make correctly autoupdate for cloud tool.
And else one block in engine, that will limit their cars speed to 30 kmh until they found how use 32 gb of RAM for ACR needs.

HT5318 Itunes 10.6.3 will not install in my computer. It says that it has found errors and is rolling back the install. What can I do? My laptop is also win7 and it did install there.

I have a Windows 7 OS 64 bit, ZT desktopcomputer with 16meg memory. I have not been able to install any updates
to itunes to my computer. It downloads, but then when installing, it looks like it is going to complete the install
and then it rolls back and says the errors occured and to try again. I have a win7 64bit HP Laptop that installed
the itune updates with no problem. I have to sync my iphone to my Laptop as it will not work with my desktop.
Please advise.
Thanks,
Roger

Do you have any other drive connected, which has a copy of FCP X?
I would make a copy of the application in some drive, just in case; then disconnect the drive, delete the application (could use FCS Remover to delete everything related).
Then, try installing from the purchases tab in the App Store.

Error 19 - Can not back up data

Hi,
I'm trying to back up my data since June 2nd (last back up). I've installed iLife09 and there's 7GB back up at Time Capsule.
Error 19 shows up (Console).
Thanks for help!
Daio

Hey there,
I don't have any direct answers for you, but I may be able to point you to somebody who does. Check out the post from Glenn Carter in this older thread. Hope it helps.
http://discussions.apple.com/message.jspa?messageID=8431678
B-rock

IPod Nano 7th gen - software update error and now not functioning

Hello,
I recently plugged an older 7th gen iPod Nano that I hadn't used in a while into my computer (Windows 7 operating system) and iTunes wanted me to let it update its software. I said 'yes,' not really thining anything of it, and as the software update was taking place, an 'unexpected error' occurred. Now my iPod will not turn on or respond or anything. It shut off while plugged into the computer and has stayed off and I am unable to get it to turn back on. It is totally dead, like the failed update somehow ruined my iPod.
The iPod itself was a little damaged - the LCD touchscreen was nonfunctioning due to water damage, and only displayed a white screen when on, but I could still 'shake to shuffle' and it would play all of my music just fine. Now the iPod will not work at all.
Is there anything that can be done or am I just out of luck here? Did the fact that the iPod was damaged have something to do with the failed update?
I'm kind of bummed 'cause the iPod still played my music perfectly....
Thanks for any help or insights anybody can give.

I should add 2 important points: 1) I have no trouble syncing with my PC, just in updating the nano software, and (2) Buried in some Apple reference I found mention of problems if the nano isn't formatted for a PC vs. Mac. It gives info on how to tell what the format is, but it's outdated (the menu choices are different). I believe it is already formatted for a PC because of an entry under Settings/About which says the Version is "1.0 PC". Tell me if I'm wrong. Also, it would help me if I knew the destination of the software download. Does it download directly to the Nano or to a temporary folder on my PC?

Software Update Error and Application connectivity problems

Hi. Hoping someone can help me with issues I've been having since we added a wireless access point to our network at home two weeks ago. I'm sharing a network with two pcs, a pc laptop and a ps3. All of which are working fine either using the wireless access point or ethernet through our router.
I have a macbook which is picking up the wireless fine, apart from a few applications. The biggest problem is that software update isn't connecting. I get a message telling me there is a networking error: NSURLError Domain - 1100. I go through the network diagnostics and it tells me that my connection is working correctly.
Another (less worrying but annoying) problem is that some widgets (facebook, wikipedia, translater etc) are not picking up the connection either. Facebook iphoto exporter also doesn't work. There is no in-built firewall in the access point and I haven't changed any firewall settings on my system (which was working perfectly with the ethernet connection). All I changed was the DNS server address.
The only time I have used airport previously is in the library at my university, where I needed to use a proxy address. I'm wondering if this may be interfering with my connection settings now, but am unsure of how to change the setting around. I'm a new mac user and this is the first issue I've had issues. Any help/suggestions are thoroughly appreciated.
thanks.

I'd been having this problem for the past few weeks (causing Software Update to fail with NSURLError -100 and the iTunes radio service to fail) and just fixed it myself.
For me the issue had to do with proxy settings in the browser versus proxy settings in System Preferences. For example, if you run Tor/Vidalia with Firefox, the browser has its own proxy settings that get changed when you activate Tor. But if you use Safari or anything else to set up the proxy, it's the network settings under System Preferences that get affected.
To check this, go to (Apple menu)>System Preferences...>Network, then choose whichever network interface you're currently using. If the lock icon in the lower left-hand corner is locked, click on it and authenticate with your password. Now click Configure... and choose the Proxies tab.
On my machine, I have "Configure proxies:" set to "Manually" (I've never used the other option, "Using a PAC file", so if you have that set I'm not sure how to debug it). Now look through the items in the "Select a proxy server to configure" panel. If there is anything checked there, it should be for a specific reason. If something is checked and you don't know why, try unchecking it.
Finally, click on Apply Now (giving your password again if prompted), close the System Preferences dialog, and try Software Update again.
This solved my problems (I had been fiddling with a local proxy for OS X Mail and Thunderbird). Your mileage may vary. Give that a shot and report back if it helps (or if it doesn't).
/HJ

When installing itunes on my xp sp3 system i get a network error and install rolls back. any thoughts?

When I install itunes on my XP sp3 system I get a network error while reading from itunes.msi. Then rolls back. any thoughts?

When I install itunes on my XP sp3 system I get a network error while reading from itunes.msi.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Trying to Remove iTunes software components because of 11.1.4 update error and using Windows 7 uninstall Apple Mobile Device Support does not work. Any suggestions?

Had error while updating Itunes to ver 11.1.4. I had 11.1.3.8 previously. Following instructions for Removing and Reinstalluing iTunes and other software components. Was able to uninstall iTunes and Apple Software Update, but attempts to do the same under Control Panel failed for Apple Mobile Device Support (ver 7.0.0.117). Directioons say to uninstall components in order given so I cannot continue until Apple Mobile Device Support is removed. Any suggestions?

Try reparing and then remove again if the repair is successful, otherwise move on to the next step. See Troubleshooting issues with iTunes for Windows updates for more information.
tt2

Itunes update error and vista

I installed the 7.5 itunes update and now when i try to open itunes vista tells me i need to update itunes. Just to be safe i uninstalled itunes and then reinstalled it from scratch but the same problem still persists.

just to update uninstalled again and tried to install itune 7.3 but it would not load the library i once had so i upgraded to 7.5 and keep getting an error message from windows telling me to update-which i have.

How can i get tone back, they been deleted and i didnt back them up

how can i get back my tones and ringtones on my phone, i forgot to back the phone also before i sync it

There has been a issue with ringtones and apple knows about it and is working on fixing it.
Apple is advising customers not to repurchase ringtones and if you did, just give them a ring and they will refund you.
Until then don't purchase any more ringtones at least until the next update.
You can request a refund by going to the Account section within iTunes on a Mac or PC, or you can get help by chat, or contact Apple Care.
Phill

How to reduce the run time of ABAP code (BADI) when it is reading huge data from BPC Cube and thus writing back huge data to the cube.

Hi All ,
In Case of reading huge amount of record from BPC Cube from BADI code , performing calculations and writing back huge amount of data into the cube , It takes lot of time . If there is any suggestion to read the data from Cube or writing data into the cube using some Parallel Processing methods , Then Please suggest .
Regards,
SHUBHAM

Hi Gersh ,
If we have a specific server say 10.10.10.10 (abc.co.in) on which we are working, Then under RZ12 we make the following entry as :
LOGON GROUP          INSTANCE
parallel_generators        abc.co.in_10         ( Lets assume : The instance number is 10 )
Now in SM59 under ABAP Connections , I am giving the following technical settings:
TARGET HOST          abc.co.in
IP address                  10.10.10.10
Instance number          10
Now if we have a scenario of load balancing servers with following server details (with all servers on different instance numbers ) :
10.10.10.11
10.10.10.13
10.1010.10
10.10.10.15
In this case how can we make the RZ12 settings and SM59 settings such that we don't have to hardcode any IP Address.
If the request is redirected to 10.10.10.11 and not to 10.10.10.10 , in that case how will the settings be.
I have raised this question on the below thread :
How to configure RZ12 and SM59 ABAP connection settings when we have work with Load Balancing servers rather than a specific server .
Regards,
SHUBHAM

Update error and i didnt back up data

Similar Messages

Maybe you are looking for