Update Measurement Points on Functional Locations

Hello Experts,
I need create a custom program to update (add/delete/change) the measurement point's POSITIONS on functional locations. Basically the users want to clean up the functional locations which have some wrong data in them. Since I am very new to this functionality area, Can anybody please let me know - Is there a FM/Bapi to update the Measurement Point Positions on Functional Locations?
I appreciate your help.
Thanks.
Edited by: sey ni on Mar 7, 2011 4:49 PM

I think I will have to write a BDC on IK01/IK02 transactions. Not sure, if we have a better solution.

Similar Messages

Update measuring points by good receipt

Hi experts,
I have a requirement where the client wants to update a measuring point based on good receipts.
The idea is to create a equipment (PRT) with a measuing point and asign this equipment on a BOM.
The FERT I will send to a vendor as subcontracting and when I receive this material, in the moment of good receipt the measuing point should be update. Is it possible using the standard ?
Kind Regards,
Bruno

hi
in standard you can update the measuring points by confirming the quantities in production order..but updating the measuring points using goods receipt is difficult
you can also try a workaround ,generally the the MIC you are creating should be linked with the characteristic which is already created for equipment (as measuring point) ,then assign a material no in the serial number tab.then do the process ( i haven't checked just a try)
so prepare an inspection plan for goods receipt with the MIC created and make the settings for follow up action for usage decision as update measuring points(assign suitable FM) ,then do the process and check
regards
thyagarajan

Change pointer for functional location- deletion flag & activation status

Hello,
Im trying to use change pointer for functional location outbound interface. I did all required settings in BD52. The problem is with deletion flag and acive/deactive status.
I found that those two are stored in:
table     field
TAPL     LOEKZ
TAPL     PARKZ
The problem I have is that I cannot find the object for those table, and due to that it cannot be customized in BD52.
Could You please advise which object class should I use or alternatively which other table/field and object should I type in to activate change poiters for deletion flag and active/ not active status?
For object IFLO, and its table (IFLOT, IFLOTX, ILOA)- there is no field for del flag and active status.
Thanks in advance.

Hi, standard didnt let us fulfilling this requirement. What we did- we extended table IFLOT with additional field for the status and used an user exit when saving FL, to take the value (status) from table JEST/TJ02T and copy the value to the newly created field. Then BD52, iflo, iflot, and the new field and it worked. Of course the function module for the message type (BD60) had to be changed to add this status value in additional segment/field for the idoc. Hope this will help You, as there is a lot of technical background behind it, and this is only functional overview.
rgds.

Update Measurement Point with new Position

Hi,
I need to update existing measuring points with new measurement positions. I was looking at FM "MEASUREM_POINT_RFC_SINGLE_002", but don't know how to pass the new Measurement Position to that.
Can anybody please let me know how has already implemented this?
Thanks.

I was looking at FM 'MEASUREM_POINT_DIALOG_SINGLE' to update Masurement Point.
I wrote the code like this. But it's not updating the Measurement Point with the new position.
Not sure if I missed anything.
Pelase help.
Thanks.
PARAMETERS: p_point type imrc_point,
                         p_psort type imrc_psort.
DATA: l_rimr03 type rimr03,
       l_ind(1) type c.
l_rimr03-mandt = sy-mandt.
l_rimr03-point = p_point.
l_rimr03-psort = p_psort.
BREAK-POINT.
CALL FUNCTION 'MEASUREM_POINT_DIALOG_SINGLE'
EXPORTING
   ACTIVITY_TYPE                  = '2'
   MEASUREMENT_POINT              = p_point
   NO_DIALOG                      = 'X'
   IS_RIMR03                      = l_rimr03
IMPORTING
   INDICATOR_UPDATE               = l_ind
EXCEPTIONS
   IMPTT_NOT_FOUND                = 1
   TYPE_NOT_FOUND                 = 2
   OBJECT_NOT_FOUND               = 3
   NO_AUTHORITY                   = 4
   POINT_IS_REFMP                 = 5
   POINT_IS_NOT_REFMP             = 6
   OTHERS                         = 7

Error while updating the classification in functional location

HI
I'm adding the classification to the fuctional location, When i save the functional location it is poping me this information.
User exit ZXCLFU02: Run program RCCLUKA2 to activate table INOB
When i run this program RCCLUKA2 tried to run as per the information provided in the Help.
When i execute this program for class type 003-Functional location i dont get any results.
still the problem persisit, If any one has come across this problem please let me know to solve this issue.
Thanks
Abdul Mujeeb

Hi Pete
The message appears like this
User exit ZXCLFU02: Run program RCCLUKA2 to activate table INOB
Message no. YMD01 000
Thanks & regards,
Mujeeb

Functional location in Measuring Point and while creating M.plan or differe

Hi,
we found that functional location in Measuring point and M.plan functional location Measuring point are differrent, how to restrict that one ,we need automatically flow of functional location from measuring point to Maintenance plan.
--Ganesh

Hi,
If you created the Measuring Point for the selected FL, then that measuring point will be populated automatically. If you have more than one measuring point, then you can select using Possible entries option.
In this case, I think its not possible to restrict with configuration.
IPRM0004 Maintenance plan / item: Customer check for time "SAVE"
Use this user exit, while saving check for the functional location for the selected measuring point & give error message.
Use tables IMPTT to get Object Number of FL. Use IFLOT to get the FL.
Regards,
Maheswaran.

PM - Functional location and measuring points

Dear all,
is there any table that stores the link between a functional location and measuring points?
Thanks in advance for any help.
Regards,
sb.

Hi
you can go for
EQUI Equipment master data
Arunima

Assignment of measuring point category to functional location category

Hi,
If i am not doing performance based maintenance planning for functional locations then is there any need to assign/put measuring point category to functional location category during customization ?
Regards,
Vivek

You could also use measurement points for Condition based maintenance functionality or for Capturing measurement readings not relevant for Maintenance planning. if your business process doesn't need both along with Performance based maintenance, its not required to assign the same.
Regards
Narasimhan

Functional Location measuring point UOM not displayed on mobile device

Dear Experts,
I am running SAP Work Manager 6.0 with Agentry Server v6.1.4.179 and SAP ECC 6.0 with SMFND 610_700 SP01 and SMERP 610_700 SP01 and Agentry Client v6.1.3.10200 on an iPhone.
When I display from the iPhone the "Valve Water Flow in m3/h" counter, the UOM is represented as "***"
The "Pump Bearing Oil Level in mm" counter UOM is displayed properly.
The Measuring Points are associated to a FLOC. A work Order with this FLOC has been transmitted to mobile device.
Thanks for your help.
Didier.
Reading Points definition in SAP:
Reading Points on iPhone:
Tags edited by: Michael Appleby

Hi Bill,
Thanks for your reply. In fact , I have the same problem with the WPF client and if I enter a reading value, I will get the following error message during the transmit. "Unit *** is not created in language EN"
WPF client display:
Transmit error:
Agentry log:
readDataObjectMeasuringPoint::begin
BAPI::begin
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
readDataObjectMeasuringPoint::SkipReading=False
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
create::/SMERP/PM_DOMEASUREMENTDOC_CRT Connection ID: com.sap.mw.jco.JCO$Client@
42499d6d
create::Function /SMERP/PM_DOMEASUREMENTDOC_CRT created
setImportParameters::TIMESTAMP_FROM_MOBILE=20140701214858
setImportParameters::COMMIT_WAIT=X
setImportParameters::MOBILE_USER=MJONES
setImportParameters::USER_GUID=005056913EE61EE3B5A27E3E2BC46F0D
setImportParameters::MIDDLEWARE_CALL=X
setParameters::begin
setParameters::POINT=26
setParameters::IDATE=20140701
setParameters::ITIME=172024
setParameters::MDTXT=
setParameters::READR=MJONES
setParameters::RECDV=0
setParameters::RECDU=***
setParameters::RECDVI=X
setParameters::CODGR=
setParameters::VLCOD=
setParameters::CODCT=
setParameters::IV_WORK_ORDER_OBJECTNR=OR000004000293
execute::::MJONES::before BAPI execute: /SMERP/PM_DOMEASUREMENTDOC_CRT
User::rethrowException::begin
User::rethrowException::Exception caught: Unit *** is not created in language EN

Functional module to Copy measurement points from one equipment to another

HI,
Please give some body function module to Copy measurement points from one equipment to another which is not assign to functional location.

To Copy Measuring Points from one equipment to another , Go to transaction IE10 and copy all the relevant data that need to be copied Check the measuring point check box, it would copy the characteristic for measuring point to the newly created equipment and would create a system generated number for the measuring point. Both the measuring points would have the same characteristics and if they are attached to each other in a hierarchy then the measurement document readings could also be transferred from one measuring point to another.. You could use the following Function Module "EQUIPMENT_COPY" to copy the measuring point from one equipment to another if equipment has already been created.
Regards...
Edited by: Usman Kahoot on Jun 9, 2010 2:37 PM

Function Modules for creation of characteristics and Measurement Points

Hello everybody
I'm new in ABAP (trainee) and especially the use of characteristics. I'd be very happy if somebody could help me :).
Can anybody out there with some experience in creating characteristics and measurement points tell me how to create them with function-modules or by changing database tables?
I'm happy about every hint and ready to give some reward points.
Best Regards,
Steffen

FM and TABLES
http://72.14.235.104/search?q=cache:71IXBMWcX_8J:reflexcontracts.co.uk/SAP_R3_QUICK_REF.xlsupdatetable+tse05&hl=en&ct=clnk&cd=1&gl=in
FUNCTION MODULES
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
Rewards if useful..........................
Minal

Auto Update of measuring point/document

Dear all,
I have one issue over here.Measuring point/document is not updating automatically after productiuon order confirmation . I tried with following steps
1) Created the equipment as test equipment -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
2) Then i have assigned this eqipment as a PRT in the routing of material .
Which steps i am missing
Thanks

Hi
I had faced the same problem when I used SAPF02 then I did following changes.
Created formula like SAP_09 * PRTSTD / SAP_08
SAP_09 : Operation Qty
PRTSTD : PRT Standard Value
SAP_08: Base Qty.
Also make sure the measuring point category should me T in IK02( PRT life counter)
Regards,
Raj

Function Module to get usage by supplying measuring point and equipment no

Hi,
I want to know what is the function module to get the usage on giving the measuring point,equipment number and month.Thanks in advance.
Regards,
SGR

Try this Function Module : ALM_ME_EQUIPMENT_GETDETAIL

Updating and deleting Partner functions for functional location

Hi ,
I am having a requirement of updating and deleting partner function for functional location .
If anyone can suggest some BAPI or function module for same .
Thanks n Regards
Manik

Hi Fritz,
Thank you for your response,
My need is to create a PARTNERS for the FUNCTIONAL LOCATION.
LET ME DESCRIBE IT.
WHEN I AM CREATING A FUNCTION LOCATION USING IL01, AS I ENTER A FUNCTIONAL LOCATION AND PRESS ENTER IN THE NEXT SCREEN.
AND
I NEED TO ENTER THE PARTNERS FROM THE DROP DROWN MENU GOTO ->PARTNERS
WHICH TAKES ME TO THE NEXT SCREEN WHERE I NEED TO FILL THE INFORMATION IN THE TWO FIELDS : FUNCT & PARTNER.
I need a partner for the functional location that i mentioned above.and i need to upload that information in through Emigall.
So my query was that can we customize that partner for this functional location and if yes, what should the constraints,
what are steps required? Do we require a custom service module?
Regards,
Robert.

TS1717 since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?

since updating itunes yesterday I now can't open it and get a pop up box about the procedure entry point not being located. anyone able to help?
these are the boxes that open up:
I am unsure as to wether I need to unistall and start again but then worry about the vast amount of songs already in the folder that I would have to reload.

anyone able to help me with the above?

Update Measurement Points on Functional Locations

Similar Messages

Maybe you are looking for