Update only global zone with patch cluster?
Is there a way to apply a Recommended and Security patch cluster to a global zone WITHOUT applying it to any non-global zones?
Much akin to patchadd -G?
Sound familiar?
[http://opensolaris.org/jive/thread.jspa?threadID=105001&tstart=0]
This guy killed a process as workaround
[http://alittlestupid.com/2009/07/04/solaris-zone-stuck-in-shutting_down-state/]
We patched some SPARC systems recently and no issues though that's little consolation to you x86 admins.
Similar Messages
-
Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?
Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?
That question is impossible to answer without more information. What troubleshooting steps have you performed? Did you try using another cable? Did you try using another USB port on the Mac? Did you reboot the Mac and reset the iPad? Have you tired restoring the iPad?
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support -
How to retrieve # on-line procs in a non-global zone with resource pool
Is there any way to retrieve the #of on line processors of the machine running in a non global zone with resource pool ?
sysconf does not return this value. In fact this is an excerpt of the man:
"If the caller is in a non-global zone and the pools facility is active, sysconf(_SC_NPROCESSORS_CONF) and sysconf_SC_NPROCESSORS_ONLN) return the number of processors in the processor set of the pool to which the zone is bound."So, from within a local zone that's in a pool (i.e. in a pool with 8 CPUs) , you want to query how many CPUs really exist in the global zone (i.e. the global zone may actually have 16 CPUs)? I don't think that's possible: in fact for security reasons it's probably intentionally disabled.
A quick workaround would be a script/cron-job in the global zone that writes a small file in the filesystem of the local zone... then from within that zone you could read the CPU count.
I'm interested though: what are you trying to set up?
Regards,
[email protected] -
Questions about patching a global zone with a zone defined via luugrape
I've discovered that under Solaris 10 u7, luupgrade -t doesn't like seeing any zones defined when applying patches. If it sees a zone or zones defined it errors out.
Well, I found a way to make it work. Basically you shutdown and detach the zones (or zones). I then delete the zone configuration. At this point, you would think luupgrade would stop complaining and just work. It doesn't. It will still fail at this point. The only way I could get it to work is in the global zone I had to do the following:
mv /etc/zones /etc/zones-ORIG
mv /zones /zones-ORIG <<< probably not needed but whatever ...
lucreate -n S10u7zfsPATCHED -p rpool <<< So at this point both my active BE and the ABE both have effectively no zone configurationRan luupgrade and, poof, it works:
luupgrade -t -n S10u7zfsPATCHED -O -t -s . ./patch_order
Validating the contents of the media <.>.
The media contains 138 software patches that can be added.
Mounting the BE .
zoneadm: global: could not get state: No such zone configured
zoneadm: failed to get zone data
Adding patches to the BE .
Transition old-style patching.
Checking installed patches...
Patch 120900-04 has already been applied.
See patchadd(1M) for instructions.
WARNING: Skipping patch 120900-04Still I'm wondering why did I have to get so extreme to make this work ... after detaching and deleting the zone configuration why would luupgrade still complain about a zone which effectively no longer existed. I looked in /etc/zones and could find nothing related to my original zone. Where is luupgrade getting this almost "ghost" zone configuration information ?I've discovered that under Solaris 10 u7, luupgrade -t doesn't like seeing any zones defined when applying patches. If it sees a zone or zones defined it errors out.
Well, I found a way to make it work. Basically you shutdown and detach the zones (or zones). I then delete the zone configuration. At this point, you would think luupgrade would stop complaining and just work. It doesn't. It will still fail at this point. The only way I could get it to work is in the global zone I had to do the following:
mv /etc/zones /etc/zones-ORIG
mv /zones /zones-ORIG <<< probably not needed but whatever ...
lucreate -n S10u7zfsPATCHED -p rpool <<< So at this point both my active BE and the ABE both have effectively no zone configurationRan luupgrade and, poof, it works:
luupgrade -t -n S10u7zfsPATCHED -O -t -s . ./patch_order
Validating the contents of the media <.>.
The media contains 138 software patches that can be added.
Mounting the BE .
zoneadm: global: could not get state: No such zone configured
zoneadm: failed to get zone data
Adding patches to the BE .
Transition old-style patching.
Checking installed patches...
Patch 120900-04 has already been applied.
See patchadd(1M) for instructions.
WARNING: Skipping patch 120900-04Still I'm wondering why did I have to get so extreme to make this work ... after detaching and deleting the zone configuration why would luupgrade still complain about a zone which effectively no longer existed. I looked in /etc/zones and could find nothing related to my original zone. Where is luupgrade getting this almost "ghost" zone configuration information ? -
Deploy HA Zones with Sun Cluster
Hi
I have 2 physical Sol 10 Servers with a storedge array for the shared storage.
I have installed Sun Cluster 3.3 on both nodes and sorted the quorum and shared drive using a zfs file system for a mount point
Next i have installed a non global zone on 1 node using the zone path on the shared filesystem
When i switch the shared file system the zone is not instaalled on the 2nd node.
So when i try to install the zone on the 2nd node
i get a Rootpath is already mounted on this filesystem
Does anyone know how to setup a Sun Cluster with HA Zones please.The option to forcibly attach a zone got added to zoneadm with a Solarus 10 Update release. With that option the procedure to configure and install a zone for HA Container use can be:
The assumption is there is already a RG configured with a HASP resource managing the zpool for the zone rootpath:
a) Swithch the RG online on node A
b) Configure (zonecfg) and install (zoneadm) the zone on node A on shared storage
c) boot the zone and go through interactive sysidcfg within "zlogic -C zonename"
d) Switch the RG hosting the HASP resource for the pool to node B
e) Configure (zonecfg) the zone on node B.
f) "Install" the zone by forcibly attaching it: zoneadm -z <zonename> attach -F
The user can then test if the zone boots on node B, halt it and proceed with the sczbt resource registration as described within http://download.oracle.com/docs/cd/E18728_01/html/821-2677/index.html.
Regards
Thorsten -
Oracle 10 g non-global zones with asynchronous I/O
Hi,
I note that using direct I/O (by setting the forcedirectio while
mounting the database file systems) and bypassing the file system
cache may improve database performance significantly, but this should
be done only for file systems in which database files and redo log
files exist. If direct I/O is used and there is not enough database
buffer cache, it may even decrease the performance by moving the
problem from double buffering to a lack of database buffer cache. So,
this performance tuning must be planned carefully, and the database
buffer cache should be sized properly. The direct I/O option should
not be used for other file systems used by other applications because
they still need the UFS buffer cache.
Now, I have Oracle database installed inside a non-global zone and I
see a lot of Asynchronous I/O wait warnings in the Oracle Alert log
file. Storage mount points with UFS filesystem contain the Oracle
datafiles and redo log files. In addition, two Oracle datafiles of 10
GB each reside on the local disks. The Oracle init.ora parameter to
set asynchronous I/O for Oracle database files is
FILESYSTEMIO_OPTIONS= SETALL.
Although the above parameter was set during the database installation,
the aiowait warnings don't seem to disappear.
Can I use the "forcedirectio" option at the Operating System /etc/
vfstab file for Oracle datafiles and redo log files?
Or, should I just move the Oracle database files residing on the local
disks to the external storage? Will this take care of aiowait warnings
and if yes, how? The storage is a DAS.
Regards
SandeepI presume you compiled php on the Sun server, was this done using gcc or the Sun One C compiler.
If the latter then you can also use the flag: --enable-nonportable-atomics when you run configure -
Patching sol10 with non-global zones.
The patch REAMDE says perform in single user mode. if the system is in single user mode, will the non-global zones get patched also?
Hello
I found a couple of docs that can help you, see the one that describe how to create "BE" in a sol10 brandz this is the safest way to patch a sol10 brand zone.
How to Install a Solaris Patchset in a Branded Zone (Doc ID 1489197.1)
And if you are using sol11.1 you can use something similar to LU
How to create and patch a new boot environment in an Oracle Solaris 10 Zone on a Oracle Solaris 11.1 system (Doc ID 1558773.1)
Regards
Eze -
Update packages for newbie in a non-global zone
Hi,
I'm new on this forum and i'm a newbie. Recently, I have install OpenSolaris and I have install a non-global zone (big-zone). So, I can install new packages manually in my non-global zone with a terminal but i don't know if it's possible to use the package manager (same tool when i'm log on my global zone in a gnome-session).
I don't know if it's possible to install gnome in a non-global zone because it's more easy to me to use the package manager tool in a graphical mode. It's very long to write a command for each package that i want update.
Thanks a lot in advance and sorry for my english.
jaymachineI know of patchadd -G, it is used when one has downloaded the pathch already. I was looking for an automated patch procedure. I use the java gui upadate manager in the global zone but it will not patch the Java Communications Suite installed in a sparse zone.
Sparse zones are more than really cool. I have entire comms suite installed in a zone with SMF for all the components, anything siezes up and it's a few minutes to reboot, piece of cake. Allows me to use one host server whilst all webserver / application instances are on port 80. -
10/22/09 SUN Alert Patch Cluster
I just applied the 10/22/09 SUN Alert Patch Cluster, and only 16 of the 176 patches were applied. Is this reasonable? I've been applying the most recent Alert patch cluster every three months for about 1-1/2 years.
continued.
I removed patch 138217-01 (svccfg & svcprop patch) and re-applied it.
Then, after booting into S-mode, I tried to continue with the broken patch 139555-08 (kernel).
It ends with
! root@jumpstart:/var/spool/patch # patchadd 139555-08
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Preparing checklist for non-global zone check...
Checking non-global zones...
This patch passes the non-global zone check.
139555-08
Summary for zones:
Zone oem
Rejected patches:
None.
Patches that passed the dependency check:
139555-08
Patching global zone
Adding patches...
Checking installed patches...
Executing prepatch script...
Installing patch packages...
Pkgadd failed. See /var/tmp/139555-08.log.21103 for details
Patchadd is terminating.
! root@jumpstart:/var/spool/patch #the logfile shows
! root@jumpstart:/var/spool/patch # vi /var/tmp/139555-08.log.21103
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
pkgadd: ERROR: couldn't lock in /var/run/.patchSafeMode/root/var/sadm/install (s
erver running?): Resource temporarily unavailable
Installation of <SUNWarc> failed (internal error).
No changes were made to the system.Help!
-- Nick -
Obtaining obsoleted Sun Alert patch Cluster
I need to build a Solaris 10 Sparc update 3 with Sun Alert Patch Cluster July 16 2007.
I cannot use a more recent Solaris instal version, nor can I use a more recent Sun Alert Patch Cluster version.
I cannot locate this specific Sun Alert Patch Cluster version for download from Sunsolve.
Can anyone advise if it is possible to obtain this Sun Alert Patch Cluster?continued.
I removed patch 138217-01 (svccfg & svcprop patch) and re-applied it.
Then, after booting into S-mode, I tried to continue with the broken patch 139555-08 (kernel).
It ends with
! root@jumpstart:/var/spool/patch # patchadd 139555-08
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Preparing checklist for non-global zone check...
Checking non-global zones...
This patch passes the non-global zone check.
139555-08
Summary for zones:
Zone oem
Rejected patches:
None.
Patches that passed the dependency check:
139555-08
Patching global zone
Adding patches...
Checking installed patches...
Executing prepatch script...
Installing patch packages...
Pkgadd failed. See /var/tmp/139555-08.log.21103 for details
Patchadd is terminating.
! root@jumpstart:/var/spool/patch #the logfile shows
! root@jumpstart:/var/spool/patch # vi /var/tmp/139555-08.log.21103
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
pkgadd: ERROR: couldn't lock in /var/run/.patchSafeMode/root/var/sadm/install (s
erver running?): Resource temporarily unavailable
Installation of <SUNWarc> failed (internal error).
No changes were made to the system.Help!
-- Nick -
MB.ACT light OFF --- after Solaris 9 recommended patch cluster applied
After applying the recommended patch cluster to several SunFire V210s/V240s the "system ready" or "activity" light on the front panel no longer illuminates. The systems come up fine and are fully functional, just no light.
While this has absolutely no impact on usability it is a bit disconcerting for the folks in the server room when glancing at the rack and not seeing the typical green light.
I first noticed the problem in mid 2007 and have tried patch clusters as recent as last month, but the light remains out.
One interesting discovery is that if I reset (hard) the ALOM module the light comes back on. However, if the system is subsequently rebooted for any reason the light does not come back on...
If anyone can shed some light on the issue I would greatly appreciate it!
-Sapcontinued.
I removed patch 138217-01 (svccfg & svcprop patch) and re-applied it.
Then, after booting into S-mode, I tried to continue with the broken patch 139555-08 (kernel).
It ends with
! root@jumpstart:/var/spool/patch # patchadd 139555-08
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Preparing checklist for non-global zone check...
Checking non-global zones...
This patch passes the non-global zone check.
139555-08
Summary for zones:
Zone oem
Rejected patches:
None.
Patches that passed the dependency check:
139555-08
Patching global zone
Adding patches...
Checking installed patches...
Executing prepatch script...
Installing patch packages...
Pkgadd failed. See /var/tmp/139555-08.log.21103 for details
Patchadd is terminating.
! root@jumpstart:/var/spool/patch #the logfile shows
! root@jumpstart:/var/spool/patch # vi /var/tmp/139555-08.log.21103
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
pkgadd: ERROR: couldn't lock in /var/run/.patchSafeMode/root/var/sadm/install (s
erver running?): Resource temporarily unavailable
Installation of <SUNWarc> failed (internal error).
No changes were made to the system.Help!
-- Nick -
FilesystemMountPoints for ufs disks mounted to non-global zones
Hello,
I have a SAN ufs disk to be used as a failover storage, mounted to non-global zones (NGZ).
Solaris 10 nodes using Cluster 3.2
I'm looking for the correct value for the property FilesystemMountPoints and the vfstab entry required for a failover disk mounted to a NGZ.
Should the path NOT include the NGZ root path?
From the man page for SUNW.HAStoragePlus, for the property FilesystemMountPoints:
You can specify both the path in a non-global zone and the path in a global zone, in this format:
Non-GlobalZonePath:GlobalZonePath
The global zone path is optional. If you do not specify a global zone path, Sun Cluster assumes that the path in
the non-global zone and in the global zone are the same. If you specify the path as
Non-GlobalZonePath:GlobalZonePath, you must specify Global-ZonePath in the global zone's /etc/vfstab.
The default setting for this property is an empty list.
You can use the SUNW.HAStoragePlus resource type to make a file system available to a non-global zone. To enable
the SUNW.HAStoragePlus resource type to do this, you must create a mount point in the global zone and in the
non-global zone. The SUNW.HAStoragePlus resource type makes the file system available to the non-global zone
by mounting the file system in the global zone. The resource type then performs a loopback mount in the
non-global zone.
Each file system mount point should have an equivalent entry in /etc/vfstab on all cluster nodes and in all
global zones. The SUNW.HAStoragePlus resource type does not check /etc/vfstab in non-global zones.
SUNW.HAStoragePlus resources that specify local file systems can only belong in a failover resource group
with affinity switchovers enabled. These local file systems can therefore be termed failover file systems. You
can specify both local and global file system mounts points at the same time.
Any file system whose mount point is present in the FilesystemMountPoints extension property is assumed to
be local if its /etc/vfstab entry satisfies both of the following conditions:
1. The non-global mount option is specified.
2. The "mount at boot" field for the entry is set to "no."
In my situation, I want to mount the disk to /mysql_data on the NGZ called ftp_zone. So, which is the correct setup?
a. FilesystemMountPoints=/mysql_data:/zones/ftp_zone/root/mysql_data
Global zone vfstab entry /dev/md/ftpabin/dsk/d110 /dev/md/ftpabin/rdsk/d110 /zones/ftp_zone/root/mysql_data ufs 1 no logging
NGZ mount point /mysql_data
OR
b. FilesystemMountPoints=/mysql_data:/mysql_data (can be condensed to simply /mysql_data)
Global zone vfstab entry /dev/md/ftpabin/dsk/d110 /dev/md/ftpabin/rdsk/d110 /mysql_data ufs 1 no logging
NGZ mount point /mysql_data
Should the path NOT include the NGZ root path?
And should the fsck pass # be 1 or 2?
Looking at this example from p. 26 of
http://wikis.sun.com/download/attachments/24543510/820-4690.pdf
This example doesn't mention the entry in vfstab.
Create a resource group that can holds services in nodea zonex and nodeb zoney
nodea# clresourcegroup create -n nodea:zonex,nodeb:zoney test-rg
Make sure the HAStoragePlus resource is registered
nodea# clresourcetype register SUNW.HAStoragePlus
Now add a UFS [or VxFS] fail-over file system: mount /bigspace1 to failover/export/install in NGZ
nodea# clresource create -t SUNW.HAStoragePlus -g test-rg \
-p FilesystemMountPoints=/fail-over/export/install:/bigspace1 \
ufs-hasp-rs
Thank you!Hi,
/zones/oracle-z is my root directory of the zone.
* add the device to the zone :
root@mpbxapp1 # zonecfg -z oracle-z
zonecfg:oracle-z> add device
zonecfg:oracle-z:device> set match=/dev/global/dsk/d12s0
zonecfg:oracle-z:device> end
zonecfg:oracle-z> add device
zonecfg:oracle-z:device> set match=/dev/global/rdsk/d12s0
zonecfg:oracle-z:device> end
zonecfg:oracle-z> exit
* add FS to NGZ's /etc/vfstab : ( You may omit this step, I don't know why but it works without this step :) )
root@mpbxapp1 # vi /zones/oracle-z/root/etc/vfstab
/dev/global/dsk/d12s0 /dev/global/rdsk/d12s0 /global/oracle ufs 1 no logging
* add FS to global zone's /etc/vfstab :
root@mpbxapp1 # vi /etc/vfstab
/dev/global/dsk/d12s0 /dev/global/rdsk/d12s0 /zonefs/oracle ufs 1 no logging
* set the FilesystemMountPoints property :
root@mpbxapp1 # /usr/cluster/bin/clresource set -p FilesystemMountPoints=/global/oracle:/zonefs/oracle oracle-hastp
Whit this configuration you may ensure that the FS is not directly accessible from master zone. Actually, it's accessible but with a different PATH. For example, for Oracle, from the master zone Oracle can not be started/stopped because the controlfile can not be accessed. :)
Hope this helps,
Murat -
Non-global zone sending TCP SYN-ACK packet over wrong interface.
After spending many hours looking at ipmon/ethereal logs, I believe I've found
a explanation (a bug?) for the following strange behaviour (Solaris 10u1):
I've got a non-global zone with Apache2 with dedicated IP and bound to interface e1000g2 of a Sun X4200 box. The global zone has a different dedicated IP bound to a different interface e1000g0.
When I point a browser at the web site, the HTML page often comes up immediately, but sometimes it will hang and only load when I press the reload browser button one or multiple times. This is reproducible with different browsers from different networks with or without DNS resolution. It's reproducible with other non-local zones configured alike and running different TCP based services (namely SSH or non-Apache HTTP).
This is what happens in a failing case (Ethereal client dump "dump_failed.txt" and IPF log "att1.txt" lines 1-3 pp): the incoming TCP SYN comes over interface e1000g2 (correct) and is passed by IPF. However, the non-global zone sends the TCP SYN-ACK package back over interface e1000g0, which is wrong and causes IPF to fail to build a correct state entry. Then, afterwards, the response packets from the webserver will be filtered by IPF, since it has no state entry.
In the success case (Ethereal client dump "dump_success.txt" and IPF log "att1.txt" lines 19-21 pp), the incoming TCP SYN is answered correctly by a TCP SYN-ACK both over interface e1000g2. IPF can build a state entry and all subsequent packets from the webserver reach the client.
=====
The non-global zone has this setup:
zonecfg:ws1> info
...snip...
net:
address: 62.146.25.34
physical: e1000g2
zonecfg:ws1>
=====
The relevant (as of the IPF log) IPF rules are:
rule 1: block out log all
rule 16: pass in log quick proto tcp from any to 62.146.25.34 port = 80 keep state
=====
If I didn't miss an important point, I suspect this to be a bug in Zones and/or IPF.
Any hints?
Thx,
Tobias
"att1.txt":
LINE PACKET_DT PACKET_FS PACKET_IFC RULE_NUMBER RULE_ACTION SOURCE_IP SOURCE_PORT DEST_IP DEST_PORT PROTOCOL TCP_FLAGS
1 08.05.2006 21:24:09 786741 e1000g2 16 p 84.56.16.159 60693 62.146.25.34 80 tcp S
2 08.05.2006 21:24:09 786863 e1000g0 16 p 62.146.25.34 80 84.56.16.159 60693 tcp AS
3 08.05.2006 21:24:09 808218 e1000g2 16 p 84.56.16.159 60693 62.146.25.34 80 tcp A
4 08.05.2006 21:24:09 837170 e1000g2 16 p 84.56.16.159 60693 62.146.25.34 80 tcp AP
5 08.05.2006 21:24:09 837189 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp A
6 08.05.2006 21:24:09 837479 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AP
7 08.05.2006 21:24:12 823801 e1000g2 16 p 84.56.16.159 60693 62.146.25.34 80 tcp AP
8 08.05.2006 21:24:12 823832 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp A
9 08.05.2006 21:24:13 210039 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AP
10 08.05.2006 21:24:18 839318 e1000g2 16 p 84.56.16.159 60693 62.146.25.34 80 tcp AP
11 08.05.2006 21:24:18 839351 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp A
12 08.05.2006 21:24:19 970040 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AP
13 08.05.2006 21:24:24 840073 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AF
14 08.05.2006 21:24:30 870503 e1000g2 16 p 84.56.16.159 60693 62.146.25.34 80 tcp AP
15 08.05.2006 21:24:30 870538 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp A
16 08.05.2006 21:24:33 480059 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AFP
17 08.05.2006 21:24:45 347464 e1000g2 16 p 84.56.16.159 60693 62.146.25.34 80 tcp AF
18 08.05.2006 21:24:45 347498 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp A
19 08.05.2006 21:24:47 857068 e1000g2 16 p 84.56.16.159 60694 62.146.25.34 80 tcp S
20 08.05.2006 21:24:47 857118 e1000g2 16 p 62.146.25.34 80 84.56.16.159 60694 tcp AS
21 08.05.2006 21:24:47 878257 e1000g2 16 p 84.56.16.159 60694 62.146.25.34 80 tcp A
22 08.05.2006 21:24:47 907630 e1000g2 16 p 84.56.16.159 60694 62.146.25.34 80 tcp AP
23 08.05.2006 21:24:47 907644 e1000g2 16 p 62.146.25.34 80 84.56.16.159 60694 tcp A
24 08.05.2006 21:24:47 907892 e1000g2 16 p 62.146.25.34 80 84.56.16.159 60694 tcp AP
25 08.05.2006 21:24:47 976361 e1000g2 16 p 84.56.16.159 60694 62.146.25.34 80 tcp AP
26 08.05.2006 21:24:47 976375 e1000g2 16 p 62.146.25.34 80 84.56.16.159 60694 tcp A
27 08.05.2006 21:24:47 976487 e1000g2 16 p 62.146.25.34 80 84.56.16.159 60694 tcp AP
28 08.05.2006 21:24:48 127599 e1000g2 16 p 84.56.16.159 60694 62.146.25.34 80 tcp A
29 08.05.2006 21:24:54 932569 e1000g2 16 p 84.56.16.159 60693 62.146.25.34 80 tcp AFP
30 08.05.2006 21:24:54 932595 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp A
31 08.05.2006 21:25:00 490052 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AFP
32 08.05.2006 21:25:02 980057 e1000g2 16 p 62.146.25.34 80 84.56.16.159 60694 tcp AF
33 08.05.2006 21:25:03 1890 e1000g2 16 p 84.56.16.159 60694 62.146.25.34 80 tcp A
34 08.05.2006 21:25:09 907916 e1000g2 16 p 84.56.16.159 60694 62.146.25.34 80 tcp AF
35 08.05.2006 21:25:09 907949 e1000g2 16 p 62.146.25.34 80 84.56.16.159 60694 tcp A
36 08.05.2006 21:25:42 948502 e1000g2 16 p 84.56.16.159 60693 62.146.25.34 80 tcp AFP
37 08.05.2006 21:25:42 948535 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp A
38 08.05.2006 21:25:54 500051 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AFP
39 08.05.2006 21:26:54 510046 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AFP
40 08.05.2006 21:27:54 520041 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AFP
41 08.05.2006 21:28:54 530040 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AFP
42 08.05.2006 21:29:54 540039 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AFP
43 08.05.2006 21:30:54 550039 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AFP
44 08.05.2006 21:31:54 560041 e1000g2 1 b 62.146.25.34 80 84.56.16.159 60693 tcp AFP
"dump_failed.txt":
No. Time Source Destination Protocol Info
1 0.000000 192.168.1.101 62.146.25.34 TCP 1079 > http [SYN] Seq=0 Len=0 MSS=1460
Frame 1 (62 bytes on wire, 62 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 48
Identification: 0x0269 (617)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde9d [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 0, Len: 0
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 0 (relative sequence number)
Header length: 28 bytes
Flags: 0x0002 (SYN)
Window size: 65535
Checksum: 0x5c3c [correct]
Options: (8 bytes)
No. Time Source Destination Protocol Info
2 0.022698 62.146.25.34 192.168.1.101 TCP http > 1079 [SYN, ACK] Seq=0 Ack=1 Win=49368 Len=0 MSS=1452
Frame 2 (62 bytes on wire, 62 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 48
Identification: 0x002f (47)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2ed8 [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1079 (1079), Seq: 0, Ack: 1, Len: 0
Source port: http (80)
Destination port: 1079 (1079)
Sequence number: 0 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 28 bytes
Flags: 0x0012 (SYN, ACK)
Window size: 49368
Checksum: 0xd017 [correct]
Options: (8 bytes)
No. Time Source Destination Protocol Info
3 0.022749 192.168.1.101 62.146.25.34 TCP 1079 > http [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0
Frame 3 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x026a (618)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdea4 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 0
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 65535
Checksum: 0x19dc [incorrect, should be 0xbdac]
No. Time Source Destination Protocol Info
4 0.022919 192.168.1.101 62.146.25.34 HTTP GET / HTTP/1.1
Frame 4 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x026b (619)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdcfd [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xcda5]
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
5 3.013084 192.168.1.101 62.146.25.34 HTTP [TCP Retransmission] GET / HTTP/1.1
Frame 5 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x0276 (630)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdcf2 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xcda5]
SEQ/ACK analysis
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
6 9.029003 192.168.1.101 62.146.25.34 HTTP [TCP Retransmission] GET / HTTP/1.1
Frame 6 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x027f (639)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdce9 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xcda5]
SEQ/ACK analysis
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
7 21.060827 192.168.1.101 62.146.25.34 HTTP [TCP Retransmission] GET / HTTP/1.1
Frame 7 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x0284 (644)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdce4 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xcda5]
SEQ/ACK analysis
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
8 35.561984 192.168.1.101 62.146.25.34 TCP 1079 > http [FIN, ACK] Seq=423 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0
Frame 8 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x029a (666)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde74 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1079 (1079), Dst Port: http (80), Seq: 423, Ack: 1, Len: 0
Source port: 1079 (1079)
Destination port: http (80)
Sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0011 (FIN, ACK)
Window size: 65535
Checksum: 0x19dc [incorrect, should be 0xbc05]
"dump_success.txt":
No. Time Source Destination Protocol Info
1 0.000000 192.168.1.101 62.146.25.34 TCP 1083 > http [SYN] Seq=0 Len=0 MSS=1460
Frame 1 (62 bytes on wire, 62 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 48
Identification: 0x02a3 (675)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde63 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 0, Len: 0
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 0 (relative sequence number)
Header length: 28 bytes
Flags: 0x0002 (SYN)
Window size: 65535
Checksum: 0x70ca [correct]
Options: (8 bytes)
No. Time Source Destination Protocol Info
2 0.020553 62.146.25.34 192.168.1.101 TCP http > 1083 [SYN, ACK] Seq=0 Ack=1 Win=49368 Len=0 MSS=1452
Frame 2 (62 bytes on wire, 62 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 48
Identification: 0x006b (107)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2e9c [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 0, Ack: 1, Len: 0
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 0 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 28 bytes
Flags: 0x0012 (SYN, ACK)
Window size: 49368
Checksum: 0xb530 [correct]
Options: (8 bytes)
No. Time Source Destination Protocol Info
3 0.020599 192.168.1.101 62.146.25.34 TCP 1083 > http [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0
Frame 3 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x02a4 (676)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde6a [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 1, Ack: 1, Len: 0
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 65535
Checksum: 0x19dc [incorrect, should be 0xa2c5]
No. Time Source Destination Protocol Info
4 0.020746 192.168.1.101 62.146.25.34 HTTP GET / HTTP/1.1
Frame 4 (476 bytes on wire, 476 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 462
Identification: 0x02a5 (677)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdcc3 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 1, Ack: 1, Len: 422
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 1 (relative sequence number)
Next sequence number: 423 (relative sequence number)
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65535
Checksum: 0x1b82 [incorrect, should be 0xb2be]
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
5 0.071290 62.146.25.34 192.168.1.101 TCP http > 1083 [ACK] Seq=1 Ack=423 Win=49368 Len=0
Frame 5 (60 bytes on wire, 60 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x006c (108)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2ea3 [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 1, Ack: 423, Len: 0
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 1 (relative sequence number)
Acknowledgement number: 423 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 49368
Checksum: 0xe046 [correct]
No. Time Source Destination Protocol Info
6 0.075838 62.146.25.34 192.168.1.101 HTTP HTTP/1.1 200 OK (text/html)
Frame 6 (413 bytes on wire, 413 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 399
Identification: 0x006d (109)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2d3b [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 1, Ack: 423, Len: 359
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 1 (relative sequence number)
Next sequence number: 360 (relative sequence number)
Acknowledgement number: 423 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 49368
Checksum: 0x29b8 [correct]
Hypertext Transfer Protocol
Line-based text data: text/html
No. Time Source Destination Protocol Info
7 0.095473 192.168.1.101 62.146.25.34 HTTP GET /favicon.ico HTTP/1.1
Frame 7 (407 bytes on wire, 407 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 393
Identification: 0x02aa (682)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xdd03 [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 423, Ack: 360, Len: 353
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 423 (relative sequence number)
Next sequence number: 776 (relative sequence number)
Acknowledgement number: 360 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 65176
Checksum: 0x1b3d [incorrect, should be 0x1e0c]
Hypertext Transfer Protocol
No. Time Source Destination Protocol Info
8 0.139786 62.146.25.34 192.168.1.101 TCP http > 1083 [ACK] Seq=360 Ack=776 Win=49368 Len=0
Frame 8 (60 bytes on wire, 60 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x006e (110)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2ea1 [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 360, Ack: 776, Len: 0
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 360 (relative sequence number)
Acknowledgement number: 776 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 49368
Checksum: 0xdd7e [correct]
No. Time Source Destination Protocol Info
9 0.144850 62.146.25.34 192.168.1.101 HTTP HTTP/1.1 404 Not Found (text/html)
Frame 9 (464 bytes on wire, 464 bytes captured)
Ethernet II, Src: D-Link_9b:09:44 (00:0d:88:9b:09:44), Dst: FujitsuS_81:79:ea (00:30:05:81:79:ea)
Internet Protocol, Src: 62.146.25.34 (62.146.25.34), Dst: 192.168.1.101 (192.168.1.101)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 450
Identification: 0x006f (111)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 50
Protocol: TCP (0x06)
Header checksum: 0x2d06 [correct]
Source: 62.146.25.34 (62.146.25.34)
Destination: 192.168.1.101 (192.168.1.101)
Transmission Control Protocol, Src Port: http (80), Dst Port: 1083 (1083), Seq: 360, Ack: 776, Len: 410
Source port: http (80)
Destination port: 1083 (1083)
Sequence number: 360 (relative sequence number)
Next sequence number: 770 (relative sequence number)
Acknowledgement number: 776 (relative ack number)
Header length: 20 bytes
Flags: 0x0018 (PSH, ACK)
Window size: 49368
Checksum: 0x7a71 [correct]
Hypertext Transfer Protocol
Line-based text data: text/html
No. Time Source Destination Protocol Info
10 0.269307 192.168.1.101 62.146.25.34 TCP 1083 > http [ACK] Seq=776 Ack=770 Win=64766 [TCP CHECKSUM INCORRECT] Len=0
Frame 10 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: FujitsuS_81:79:ea (00:30:05:81:79:ea), Dst: D-Link_9b:09:44 (00:0d:88:9b:09:44)
Internet Protocol, Src: 192.168.1.101 (192.168.1.101), Dst: 62.146.25.34 (62.146.25.34)
Version: 4
Header length: 20 bytes
Differentiated Services Field: 0x00 (DSCP 0x00: Default; ECN: 0x00)
Total Length: 40
Identification: 0x02af (687)
Flags: 0x04 (Don't Fragment)
Fragment offset: 0
Time to live: 128
Protocol: TCP (0x06)
Header checksum: 0xde5f [correct]
Source: 192.168.1.101 (192.168.1.101)
Destination: 62.146.25.34 (62.146.25.34)
Transmission Control Protocol, Src Port: 1083 (1083), Dst Port: http (80), Seq: 776, Ack: 770, Len: 0
Source port: 1083 (1083)
Destination port: http (80)
Sequence number: 776 (relative sequence number)
Acknowledgement number: 770 (relative ack number)
Header length: 20 bytes
Flags: 0x0010 (ACK)
Window size: 64766
Checksum: 0x19dc [incorrect, should be 0x9fbe]lev wrote:This performance regression renders openvpn with a tun adapter unusable if client and server use kernel 3.14 .
Thus I created a bug report: https://bugs.archlinux.org/task/40089
i actually noticed it to be an "either-or" type of thing; my Windows clients were seeing the same thing coming off a 3.14 openvpn server.
yeah, weird issue. like i noticed spurts of even-powers-of-2 sized packets
Client connecting to 10.10.10.6, TCP port 5001
TCP window size: 416 KByte
[ 3] local 10.10.10.1 port 40643 connected with 10.10.10.6 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 2.0 sec 512 KBytes 2.10 Mbits/sec
[ 3] 2.0- 4.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 4.0- 6.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 6.0- 8.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 8.0-10.0 sec 128 KBytes 524 Kbits/sec
[ 3] 10.0-12.0 sec 128 KBytes 524 Kbits/sec
[ 3] 12.0-14.0 sec 512 KBytes 2.10 Mbits/sec
[ 3] 14.0-16.0 sec 128 KBytes 524 Kbits/sec
[ 3] 16.0-18.0 sec 512 KBytes 2.10 Mbits/sec
[ 3] 18.0-20.0 sec 128 KBytes 524 Kbits/sec
[ 3] 20.0-22.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 22.0-24.0 sec 256 KBytes 1.05 Mbits/sec
[ 3] 24.0-26.0 sec 512 KBytes 2.10 Mbits/sec
[ 3] 26.0-28.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 28.0-30.0 sec 256 KBytes 1.05 Mbits/sec
[ 3] 30.0-32.0 sec 128 KBytes 524 Kbits/sec
[ 3] 32.0-34.0 sec 640 KBytes 2.62 Mbits/sec
[ 3] 34.0-36.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 36.0-38.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 38.0-40.0 sec 384 KBytes 1.57 Mbits/sec
[ 3] 40.0-42.0 sec 128 KBytes 524 Kbits/sec -
Solaris 10 08/06 version container within Solaris 10 05/08 global zone
I have the need to run Solaris 8 , Solaris 9 and even Solaris 10 (08/06) containers within my Solaris 10 05/08 global T5120. No problem with the branded Solaris 8 nad Solaris9, but I'm not sure how to create a native Solaris 10 (older version 06) to run on the newer version Solaris 10 05/08. Do I have to create the global zone with the older 06 version of Sol 10? hmm?
The minimum supported version for a 5120 is Solaris 10 8/07.
And they wouldnt say that without a good reason.
Its pretty silly of a software vendor to specify a particular version of Solaris 10.
Unless they mean that version or later.
I mean suppose its certifed for Solaris 10 8/06 and you start with that.
Then you run smpatch and apply all available patches.
What you end up with is virtually indistinguishable from Solaris 10 5/08 anyway.
So unless, they certify a specific version and also specify the set of patches you are allowed to apply.
Then the restriction is virtually meaningless.
Personally I suggest you just go with Solaris 5/08 and be done with it.
As far as I know, theres no way for you to use the "earlier" version without buying new hardware.
The closest you could come is to run it on a solaris 9 zone. -
GUI interface for non-global zones
My Goal:
Create multiple zones, each running different services thus eliminating the need for multiple servers w/out using VMware.
What I'm realizing:
Everything I've read points back to non-global zones being only a console based environment. Does anyone know if it's possible to login to non-global zones with a GUI interface?
Thanks,
RickWe use the CDE login mechanism. From the CDE login screen on the global zone:
[] Select Options, Remote Login, Enter Host Name from the CDE login screen.
[] Enter the hostname (not the zone name!) of the non-global zone in the Enter the host name box.
[] Click OK.
[] Once the CDE login screen appears with the hostname of the non-globalzone listed at the top, log in as sysadmin.
Notes: If the non-global zone or the system was recently booted, wait a few minutes and check to make sure that the cde-login service is running using the command:
svcs -a | grep cde-login
Also, if you have restricted /etc/Xaccess, you'll need to add your non-global zone to it.
Message was edited by:
r2ad
Message was edited by:
r2ad, http://www.r2ad.com
Maybe you are looking for
-
Best way to make an image backup of a Boot Camp partition?
I want to upgrade my Windows XP partition to Windows 7. Before I do, though, I want to make a complete image backup of the partition, so if anything gets terribly screwed up, I can restore from the image and be right back where I started. How can I m
-
Failover Cluster creation fails 2012R2
Create Cluster Cluster: FailoverCluster Node: WS2012R2-2.yottabyte.inc Node: WS2012R2-1.yottabyte.inc IP Address: DHCP address on 192.168.136.0/24 Started 3/31/2015 11:48:52 PM Completed 3/31/2015 11:52:13 PM Beginning to configure the cluster Failov
-
Error when launching BEx analyzer from Portals
BI Gurus... We are working on an initiative to migrate our user interface from SAP GUI to Enterprise Portal. Bex Analyzer is primary mode of reporting at this time. After importing the Roles into EP, I am able to execute the web queries successfully,
-
NWDI - Track locked for editing in another session
While editing Track Data in the CMS Landscape Configurator my browser session died unexpectedly. I logged back in, but now when I try to enter Change mode on the Track Data tab, I get a message saying the "Track is locked for editing by (me) in anot
-
I am just wondering if it's except-able to put and insert in the exception block? What I would like is if date2 is null kick off an error. if there are no records where date2 is null then go ahead and insert the new record. Is this common practice or