Update VO row status to changed

I have master - detail table.I select entry from master table and click modify to open rw detail table.
I have status column in detail table (not rendered) and I would like to reset status of that column to changed
when something is changed in that row.
How can I do this?
Tnx in advance.

Hi,
using ADF, you can add the status attribute to the tree binding (which is used as the table binding). Assuming the row you change is the current row inthe binding, you can access the current row of the iterator and set the attrubute on it calling setAttribute(String,Object)
Frank

Similar Messages

Update sales orders status after changing item completion rule

Hello!
I've just changed the item completion rule of a given sales document item (from 'B' to blank). But we have several old orders, which have deliveries created with reference, with some fields still open (due to the 'no reference' status at the item level). The orders created after the new condiguration are ok.
So, is there any way I can update the status of those old orders? Already tried the report SDVBUK00, but did not work out.
Any ideas are welcome.
Thanks.
Adriano Cardoso

Hi,
check if oss note 1472007 helps.
Regards,
JM

Once more - tabular form / update only rows that have changed

I know it's been asked before, but I haven't seen an answer I like. :-)
I have a query that includes a single column the user can update, using APEX_ITEM.TEXT(10, updateable_field, 10, 10)
I have an additional APEX_ITEM.HIDDEN(21) and APEX_ITEM.HIDDEN(22) that hold the two fields of the composite primary key. In order to track whether my updateable_field had changed, I created APEX_ITEM.HIDDEN(11, updateable_field), which I expected would hold the OLD value of the field. See where I'm going with this? :-)
I'm attempting to loop through apex_application.g_f21, get the values for F10 (new) and F11 (old) and compare them. If they're different, I'll do the update.
It works fine if the old value (F11) is empty and I plug in a new value (to F10).
But if I change a field that had already has a value (in F11) and make it NULL, I notice that F11(i) doesn't exist. In that case, I set the value to NULL, and the compare fails because it thinks the row is unchanged.
Can someone suggest or point me to an alternate method that works?
Thanks as always,
Stew

Mike,
Thanks for the suggestion, which is a good one. But I had that one covered.
I have it working now, and I believe the fix was that I moved the APEX_ITEM.HIDDEN that contained the old value in the query. I'd had it concatenated with the column for the new value (which used APEX_ITEM.ITEM). I changed it to concatenate to a plain string value. And now the array has values in it, which I can properly compare.
Thanks again. That was really driving me nuts!
Stew

Force "Update document rows according to neu BP'sData"

How can I run the command "Update document rows according to neu BP'sData" over my AddOn.
This command start automatically when GPCode change in the sales document for example.
thanks,
Marcelo

Hi,
There is no function that you can force the updating of the rows in your addon.
what you can do is to simulate how SAP B1 do the updating of the row.
You can Pop a messagebox to ask if they want to update the rows if they change the business partners.
If they select Yes then
Get the PriceList that the Business Partner is using then Parse the Rows And find the Price for that item in the Price List and update the Price Column.
else
Do nothing..
Thanks and regards,
Wilson

Prevent update to document after status is changed

Hi all, I configured a new status profile for a sales document ITEM and want to stop user from editing the item once the status is changed to 'Close'. I have tried with Business Transaction 'Edit' (forbidden is set) and 'No Change Allowed' (allowed is set) but the system still allows me to update the sale item. These are the business transaction configured under Transaction Control. Can I find out what other areas I might have missed out?
Please note that with or without the configuration of the business transaction to block updates, the system will close off certain fields for update, e.g. Quantity field.
I know my last resort is to use the BADI but I understand that this is achievable via configuration but it somehow did not work for me. I read in other posts that people mentioned about 'Change document' but I cannot find this transaction in the list given in the configuration.
Lastly, just wondering whether the business transaction field for 'User Status Triggers Business Transaction' has any impact on what I am trying to achieve? I have assigned 'FINI' in this case.
Appreciate any advice on the above.
Cheers!
SF

Hi Christophe,
Re my statement "One thing I do not understand is why am I not seeing the business transaction for Change Document?" - I meant when trying to maintain the business transaction through the transaction control screen of the status. Example:
The transaction control screen:
When I click the New Entries button, I get this list to work on:
I scrolled through the list and could not find 'Change Document' (CHCG). Does that make sense?
I will have a closer look at the status analysis and see whether there is anything I can find.
Cheers
SF

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6. 10.6.7 now appears to be missing from the computer and my administrator status has changed to standard.

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard. Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone. I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive. Should I just reformat and start over? Any ideas or help would be appreciated.

PROBLEM SOLVED! For me at least!
Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
I reinstalled 10.6.7 using the DVD supplied and all is well.
The moral is - don't use Migration Assistant.
Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
Hope this helps.

Can i Change/Update the Lead Status using Action profile of Activity.

Hi,
I have created one Lead, and on the basis of Qualification level action triggers and Ativity getting generated.
I want to know that it is possible by using functions(Action Profile/conditions) in activity, If i change the status reason of Activity (as Accepted) Earlier Leads status would change.(as Close)
Please resolve with solution.
Regurds,
Dipesh.

Hi Dipesh,
What I understand is, u wish to change the status of preceding lead transaction when the activity status reason is changed to accepted.
1. This functionality can be achieved using ORDER_SAVE Badi. This Badi implementation shall check the activity reason changed to accepted, if yes, read the doc flow, get the lead transaction and change its status to close.
2. As per my knowledge use of action profiles and conditions will not be helpful in this case.Else, create an action definition as Activity reason changed, put a condition which like Activity reason= Accepted.
In the action definition Processing type use method call.
Here u will have to create a new implementation of the BADI of action profile, and put the same logic as stated in point 1.
But in think implementing point 1 should be easier.
Wish the information is useful.
Regards,
Shalini Chauhan

Update 100 Row Data In One Time against a Code

Dear Expert,
How can I update a Master Data Row Table record using a particular code. Like I write a query Update Table Set U_UDF = 'Value' Where Code = 2
U_UDF is the field of Master Data Row Table's field. There are 100 Row against code 2 & I want to update all row with same value but in one time only.
How can I do that ?
Plz help me.
Regards

Hi,
Try this:
SAPbobsCOM.GeneralService oGeneralService = null;
                                                SAPbobsCOM.GeneralData oGeneralData = null;
                                                SAPbobsCOM.GeneralDataParams oGeneralParams = null;
                                                SAPbobsCOM.CompanyService sCmp = null;
                                                SAPbobsCOM.GeneralData oChild = null;
                                                SAPbobsCOM.GeneralDataCollection oChildren = null;
                                                sCmp = SBO_Company.GetCompanyService();
                                                oGeneralService = sCmp.GetGeneralService("UDO");
                                                // Get UDO record
                                                oGeneralParams = ((SAPbobsCOM.GeneralDataParams)(oGeneralService.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)));
                                                oGeneralParams.SetProperty("Code", ContractCode);
                                                oGeneralData = oGeneralService.GetByParams(oGeneralParams);
                                               // Add lines on UDO Child Table
                                                oChildren = oGeneralData.Child("CONTRACTDETAIL");
                                                // Update an existing line
                                                oChild = oChildren.Item(LineId - 1);
                                                DateTime dt = DateTime.Now;
                                                oChild.SetProperty("U_STATS", "Terminated");
                                                oChild.SetProperty("U_Updated", dt);
                                                oChild.SetProperty("U_Remarks", "Service Terminated");
//Update the UDO Record
                                                oGeneralService.Update(oGeneralData);
I have given you the sample. Just change it accordingly.
Hope it helps.
Thanks & Regards
Ankit Chauhan

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

15 concurrent users and JBO-35007 row currency has changed

Hi!
Something for the weekend :)
I have an ADF/BC 10.1.3.3. application on 10.1.3.3. Oracle AS. I use a jazn security with users and roles stored in database tables. While testing with one or two users I never ran into the same problem as we had this week when testing with 15 users. I have an entity and VO with a whole attributes that are edited in a couple of jspx pages that composed with process train control. There are also a couple of detail data edited on this page. I'm using ProcessScope quite a lot to pass some information between the pages.
Well, to get to the point: when testing with 15 users we had A LOT of JBO-35007 row currency has changed since the user interface was rendered errors in this process. Every user was editing it's own data row. The error appeared every time a user left the application inactive for a couple of seconds, entered some data and clicked commit. I'm not aware of the security settings of the browser on the testing computers and I can't get them now to see if something like this could be the problem.
When I checked the log files, there are a lot of errors or warnings in them. I'll try to sum the ones that might be important for this issue. These errors appear a lot's of times in these log files that is why I'm assuming some of these are connected to my issue.
application.log file in application-deployments logs:
08/04/23 09:58:42.443 MyViewControllerArchive: Servlet error
java.io.IOException: An existing connection was forcibly closed by the remote host
08/04/23 11:31:47.980 MyViewControllerArchive: Servlet error
java.io.IOException: An established connection was aborted by the software in your host machine
08/04/23 11:31:49.402 MyViewControllerArchive: Servlet error
java.lang.IndexOutOfBoundsException: SelectOne submittedValue's index 0 is out of bounds. It should be between 0 and -1
08/04/23 11:33:19.104 MyViewControllerArchive: An established connection was aborted by the software in your host machine
08/04/23 11:33:19.104 MyViewControllerArchive: Servlet error
java.io.IOException: An established connection was aborted by the software in your host machine
A whole lot of these kind of errors:
08/04/23 11:24:06.80 MyViewControllerArchive: Servlet error
oracle.jbo.common.ampool.ApplicationPoolException: JBO-30019: An unavailable cookie state was detected while attempting to use a cookie. applicationId: 54ffe51d30d5c84e0cb1979645a196749529aeb674d8, sessionId: MyModuleDataControl.
08/04/24 08:39:22.424 MyViewControllerArchive: Servlet error
java.lang.IllegalStateException: Response has already been committed
log.xml file in oc4j folder:
<MESSAGE>
          <HEADER>
               <TSTZ_ORIGINATING>2008-04-23T09:53:49.165+02:00</TSTZ_ORIGINATING>
               <COMPONENT_ID>adfinternal</COMPONENT_ID>
               <MSG_TYPE TYPE="WARNING"/>
               <MSG_LEVEL>1</MSG_LEVEL>
               <HOST_ID>my_AS</HOST_ID>
               <HOST_NWADDR>my_IP</HOST_NWADDR>
               <MODULE_ID>view.faces.model.binding.FacesCtrlRangeBinding</MODULE_ID>
               <THREAD_ID>10</THREAD_ID>
               <USER_ID>SYSTEM</USER_ID>
          </HEADER>
          <CORRELATION_DATA>
               <EXEC_CONTEXT_ID>
                    <UNIQUE_ID>1208937229:my_IP:3020:1764:630</UNIQUE_ID>
                    <SEQ>1</SEQ>
               </EXEC_CONTEXT_ID>
          </CORRELATION_DATA>
          <PAYLOAD>
               <MSG_TEXT>rowIterator is null</MSG_TEXT>
          </PAYLOAD>
     </MESSAGE>
<MESSAGE>
          <HEADER>
               <TSTZ_ORIGINATING>2008-04-23T09:48:30.903+02:00</TSTZ_ORIGINATING>
               <COMPONENT_ID>j2ee</COMPONENT_ID>
               <MSG_ID>J2EE DS-00265</MSG_ID>
               <MSG_TYPE TYPE="WARNING"/>
               <MSG_LEVEL>1</MSG_LEVEL>
               <HOST_ID>my_AS</HOST_ID>
               <HOST_NWADDR>my_IP</HOST_NWADDR>
               <MODULE_ID>datasource</MODULE_ID>
               <THREAD_ID>12</THREAD_ID>
               <USER_ID>SYSTEM</USER_ID>
          </HEADER>
          <CORRELATION_DATA>
               <EXEC_CONTEXT_ID>
                    <UNIQUE_ID>my_IP:57162:1208526415373:226</UNIQUE_ID>
                    <SEQ>0</SEQ>
               </EXEC_CONTEXT_ID>
          </CORRELATION_DATA>
          <PAYLOAD>
               <MSG_TEXT>Unclosed connection detected : 'oracle.oc4j.sql.spi.ConnectionFinalizer@f67148' : ''.</MSG_TEXT>
          </PAYLOAD>
     </MESSAGE>
<MESSAGE>
          <HEADER>
               <TSTZ_ORIGINATING>2008-04-23T09:53:54.165+02:00</TSTZ_ORIGINATING>
               <COMPONENT_ID>adf</COMPONENT_ID>
               <MSG_TYPE TYPE="WARNING"/>
               <MSG_LEVEL>1</MSG_LEVEL>
               <HOST_ID>my_AS</HOST_ID>
               <HOST_NWADDR>my_IP</HOST_NWADDR>
               <MODULE_ID>controller.faces.lifecycle.FacesPageLifecycle</MODULE_ID>
               <THREAD_ID>13</THREAD_ID>
               <USER_ID>SYSTEM</USER_ID>
          </HEADER>
          <CORRELATION_DATA>
               <EXEC_CONTEXT_ID>
                    <UNIQUE_ID>1208937232:my_IP:3020:508:635</UNIQUE_ID>
                    <SEQ>299</SEQ>
               </EXEC_CONTEXT_ID>
          </CORRELATION_DATA>
          <PAYLOAD>
               <MSG_TEXT>JBO-35007: My 35007 JBO message since I overwritten the message text</MSG_TEXT>
          </PAYLOAD>
     </MESSAGE>
The problem is I can't reproduce this behaviour any more in my environment. If someone could maybe point me to the errors that are important and could be the cause of this errors. Could this be an internet browser security settings issue? What about those errors about aborted connections?
If you can't provide me an answer (which I know it would be very difficult by the information provided), maybe you could explain the cause of some of the errors described above?
I'd appreciate any tips on this since I don't have e an idea how and where to start to at least reproduce and find out the cause of this. Than I'll worry about the solution :).
Thank you in advance,
BB

Hi,
I am also facing the same issue JBO-30019: An unavailable cookie state is detected while attempting to use a cookie from application {0}, session {1}.
Is there anyone who has been able to reproduce this. If yes can you please update the following bug which is logged for the issue: [9507310|https://bug.oraclecorp.com/pls/bug/webbug_edit.edit_info_top?report_title=&rptno=9507310&query_id=814000&rptno_count=1&pos=1]
It will be of much help.
I have found the following page referring the problem: page, if this helps.
Please update.
Regards,
Ashis
글 수정: user9546421

Updating service order status in CRM from R3 after the invoice is created

Hi all ;
I need to update the user status of an service order in CRM when the invoice related to it in R3 is created, so I have already know the service order no .
How can i achieve this by sending BDOC from R3 to CRM? Which BDOC should i use?and is it enough to fill only status data in BDOC?
Thanks.

Hi sushant,
When the R/3 Order status is set to 'Completed' then the system status for order in CRM system is automatically changed to 'Completed'.
So firstly check whether the User status ('Completed')in SAP CRM has the Business transaction event set to 'FINI'. So when the system status is set to 'Completed' the user status will also change to 'Completed.'
Secondly even check what are the statuses of item in the Orders.
regards,
Anubhav

Going back to same row after saving changes in classic report

dear all,
I have a long classic report .User is able to update different rows of this report using MR update process.Now user is asking for easier flow.What he wants is to be able to go back to same row after he saves the changes.How is it possible to do so
Thank you so much,
Zahra

Hi,
I have one sample
https://apex.oracle.com/pls/apex/f?p=40323:40
When you change Active column select list, page is submitted. After submit JavaScript scrolls report
See this post about details
HELP TABULAR FORM CURSOR FOCUS
Regards,
Jari

How can I add a link to an item within a workflow email - which will always find the item - even if it's status has changed?

I've used the method within the SharePoint designer to add a link to the workflow context current item URL, but when the current item status changes then obviously this link will no longer work.
How can I change this link so that it will always open the item, even if someone has changed it within the list, before I clink on the link?
This is an important one as over 300 people will use the list and many of these will be emails about items on the list will be in different time zones. I don't want to have lots of mails from people saying "this list doesn't work" as it's
critical they keep using it.
Please help.
P.S. I don't know if the <href> method will work, so if someone can confirm to me then that would be great.

Hi,
According to your post, my understanding is that add a link to an item within a workflow email.
I’ m not very clear about the status you said. Please descript more detail which URL do you want to display.
Per my knowedge, you can display the following url in your email body:
[%Workflow Context: Current Item URL%]
[%Workflow Context: Current Site URL%]
[%Workflow Context: Workflow Status URL%]
[%Current Item: Encoded Absolute URL%]
Please start the workflow automatically when an item is changed and changed.
No matter how you edit the item or update the approve status, the URLs remains the same.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Update one row at a time, Data Grid

Is it possible to update one row of a mx:DataGrid at a time. I want to be able to have a user push a button and info populates one row of the data grid, user changes some properties and pushes the button again and another row of values populate the DataGrid. Everything I see does a mass population from an XML or what have you.
Thanks

I did this this to work, so for those of you who may find this info helpfull here is how I solved the issue.
I instantiated an ArrayCollection object like so:
private var _rowValues:ArrayCollection = new ArrayCollection();
I simply referenced the .addItem() property of my ArrayCollection.
I then added values to the ArrayCollection as follows
_rowValues.addItem({Ingredient:ingredient, Amount:amount, Category:category}); //dataField:value
and referenced the dataField proerpty of the DataGrid... so in my case my 3 dataField properties (in my mxml compontent) were as fillows:
dataField="Ingredient"
dataField="Amount"
dataField="Category"
all done, and it works.

Update all rows in a View Column via one Apex Form field

Appreciate any helpful answers to this query.
I have an Apex App (4.x) where I have a view: PRICE_MODEL_CRA_V
In the view, I have the following applicable columns:
COUNTRY
GRADE
SALARY
In the form I have the following fields
:P16_COUNTRY (DROPDOWN)
:P16_GRADE (DROPDOWN)
:P16_SALARY (Number)
In my app, I have a form with an Update button. I am simply trying to get Apex to update all rows in the salaray column in the view, where the country and grade match.
I've the following code for the Update button:
UPDATE PRICE_MODEL_CRA_V
SET SALARY = :P16_SALARY
WHERE COUNTRY = :P16_COUNTRY
AND GRADE = :P16_GRADE
The option I have chosen in condition type is:
Value of Item / Column expression is NOT Null (as there are values in the column)
Also tried SQL Expression and it does not like..says that there is No Expression.
Thanks again if anyone can help :)

Hi,
Sorry I realize now that piece of information was not well supported.
If I choose SQL Expression for Condition Type in my Form Page and I try to Apply Changes
Apex says this..
•Failed to parse SQL query!
ORA-00936: missing expression
I was assuming that I need to have the colon for the items in the form where I am wanting Apex to grab the values entered by the user. I tried them without the colons with the SQL Expression condition and same result.
UPDATE PRICE_MODEL_CRA_V
SET SALARY = P16_SALARY
WHERE COUNTRY = P16_COUNTRY
AND GRADE = P16_GRADE
I did put 1-1/0 in my expression field and applied changes and then tried ot submit the form and it does not produce an error, so perhaps it is not being called? Where would I start with troubleshooting that?
Thanks,

Update VO row status to changed

Similar Messages

Maybe you are looking for