Prevent update to document after status is changed

Hi all, I configured a new status profile for a sales document ITEM and want to stop user from editing the item once the status is changed to 'Close'. I have tried with Business Transaction 'Edit' (forbidden is set) and 'No Change Allowed' (allowed is set) but the system still allows me to update the sale item. These are the business transaction configured under Transaction Control. Can I find out what other areas I might have missed out?
Please note that with or without the configuration of the business transaction to block updates, the system will close off certain fields for update, e.g. Quantity field.
I know my last resort is to use the BADI but I understand that this is achievable via configuration but it somehow did not work for me. I read in other posts that people mentioned about 'Change document' but I cannot find this transaction in the list given in the configuration.
Lastly, just wondering whether the business transaction field for 'User Status Triggers Business Transaction' has any impact on what I am trying to achieve? I have assigned 'FINI' in this case.
Appreciate any advice on the above.
Cheers!
SF

Hi Christophe,
Re my statement "One thing I do not understand is why am I not seeing the business transaction for Change Document?" - I meant when trying to maintain the business transaction through the transaction control screen of the status. Example:
The transaction control screen:
When I click the New Entries button, I get this list to work on:
I scrolled through the list and could not find 'Change Document' (CHCG). Does that make sense?
I will have a closer look at the status analysis and see whether there is anything I can find.
Cheers
SF

Similar Messages

Document user status not changed from follow-up document

Hi gurus!
My task is to set new user status of primary document (service order) from follow-up document (task) after follow-up document is created.
To do this I've created Badi-impl. of ORDER_SAVE Badi and in PREPARE method when saving newly created follow-up task I'm setting new service order user status using 'CRM_ORDER_CHANGE_STATUS' function. sy-subrc = 0 and, moreover, when in SAP GUI I'm pressing "Back" button I see new user status in service order. But after I'm pressing "Change" or re-open the service order - I see the old user status, so nothing happens at all.
Why could it be?
Thanks in advance.
Best regards,
Alexander Kirillov

Hello Szymon,
The solution is:
1. CALL 'CRM_STATUS_CHANGE_EXTERN_OW'
2. If ok - CALL 'CRM_STATUS_SAVE_OW' passing relevant header/ item GUID
Regards,
Alexander
Edited by: Alexander Kirillov on Jul 17, 2009 6:47 PM

Unable to update system apps after credit card change

Hi all,
A store called (no name) an authorized Apple dealer for Thailand installed a new hard drive 1Tb on my Mac book pro (2009).
Now I am not able to update system app originally installed on my mac like iPhoto, iMovie and GarageBand.
I get the message:
My question:
How can I get these system apps back to my mac?
To explain the problem:
my original hard drive started to get really slow and after a mavericks update.
All of a sudden Appstore has stopped working and wouldn't start up.
I was unable to do updates and also Pages , Numbers and terminal stopped working.
After googling what the problem could be I have learned that there might be a application causing the problem a third party app I later found out.
I went to the store and I asked if a upgrade with a new hard drive (1Tb) and memory (8gb) could solve the problem, the said yes and i agreed to do this installation!
Unfortunately the store just installed the hard drive but was unable to provide me with the memory as agreed so now i have only the 1tb hard drive.
The system incl. Pages , Numbers and terminal now is working again, not really faster but improved a bit and this also included the startup time, except the items mentioned above. ( iPhoto, iMovie and GarageBand)
By the way:
I did change my CC as I am in Asia and my old card was running out of date!
I had a different Apple Id because i had purchased the Mac in Thailand and changed the store and Id to Spain (for CC reasons) but was never a problem if i had updates in the past!
Thanks for any advice.

I don't know if it will solve your original problem, but the Vodafone software needs to be reinstalled or removed.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking theCustomize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Updates to website after domain name change

Can I still update my website using iweb after I transition to a new domain name?

I use third party hosting to mean a company other than Apple's .Mac. I also use godaddy to host my sites and it is very simple. They will provide an address of the ftp site name for your domain. I publish from iWeb to a folder, then use Cyberduck (any FTP program will do) to upload. You don't even need the ftp program because godaddy has their own simple ftp built in to the service. They also have excellent and free technical service. You can look at my site at: http://bandb.holage.com.

When reopening a document after making a change and saving, the change has not been saved. A

Adobe Reader X

Here's a test to see where the problem lies.
Open the file in Reader X
Make a change
Save the file to desktop.
If it isn't the same computer with Reader 9, copy this to the other computer, perhaps using a memory stick.
Open the file in Reader 9.
Is the change showing up in Reader 9?

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6. 10.6.7 now appears to be missing from the computer and my administrator status has changed to standard.

After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard. Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone. I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive. Should I just reformat and start over? Any ideas or help would be appreciated.

PROBLEM SOLVED! For me at least!
Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
I reinstalled 10.6.7 using the DVD supplied and all is well.
The moral is - don't use Migration Assistant.
Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
Hope this helps.

Update in disconnection document after reversal of demounted device by EG53

Hi everybody,
I have an issue reagardig diconnection document update. For instance if i make a device removal EG32 in a disconnected installation, the status of the disconnection document it is update with status 24 or 27.
So far so good, but if i make the reversal of the demounted device with EG53, the status of the disconection document remains 24 or 27 (no update to 21).
This is no good for the next steps in reconnection, because the device shows like iti is demounted, but in fact it is installed.
Please, a solution,
Thank you,

Hi Olivia,
Thank you for your reply, but this is not a solution, because the users uses EG53 for a year, and by the way EG50 doesn`t work - The status of the device doesn`t allow it.
The scenario it is like this:
1. He use EG32 to demount a meter - this will change the status of the disc, document to 27.
2. He use EG53 to reverse the demounted meter - this it is not related to the disc doc to change it to 21.
This is my problem because the disc document after EG53 remains in status 27.
And if we look at the device this is installed.
Thank you,
KR

PSM-FM-Reversal of funds management document after change in acc.assignment

Good day we recently went live with a component of Funds Management i.e. Availability Control on Cost centers and cost elements. We update BCS with the plan values and actual/commitment items in Finance/CO. We do our planning in CO.
The solution is working reasonably well but we have encountered a problem for which we are unable to find a solution. The problem is best illustrated with an example;
1. Create purchase requisition with Account Assignment Category "K" = Cost Center with transaction ME51N
2. Account assignment = cost center and cost element. A funds management document is created upon saving of the transaction.
3. Purchase Req. is released with a release strategy (transaction ME54N)
4. After purchase requisition release the account assignment for the cost element is changed by the user. This occurs sometimes during the execution of the business process.
5. When a purchase order is created with reference to this purchase requisition with transaction ME59N the system references the original funds management document which means when the account assignment was changed the funds management document was not reversed and a new funds management document created for the changed account assignment.
6. The BUDCON report transaction FMRP_RW_BUDCON thus displays the commitment under the incorrect commitment item as the change in account assignment is not reflected in Funds Management. We have a one to one relationship between cost elements/commitment items and cost centers/funds centers as per the derivation strategy.
My question is;
Is this normal standard SAP standard behavior or are we missing some configuration that will enable the creation of a new funds management document and if so where do we configure such? I must mention our solution is completely SAP standard.
Thank you in advance.
Best Regards
Mike Olwagen
Manager SAP Solution Support
City Power (JHB) (Pty) Ltd

Hi Mike, nice to meet you.
I think u should do an entire test with TRACE on, and u will find the problem, and how to fix it (at FMDERIVE of course).
First: Have a look at note [666322|https://service.sap.com/sap/support/notes/666322], go to FMDERIVE and turn ON the trace.
Then, run all the process ... from ME51N to the end...
I agree with Eli, u must allow overwriting of existing values at FMDERIVE rule...
Regards,
Osvaldo.

How can I prevent any use to update Purchase order if status was "Approval"

I have some users can update any purchasing order update after "Approval"
Please I would any Purchasing oracle module expert to Assist me to get way to solve problem.
How can I prevent any use to update Purchase order if status was "Approval"?
Further Information :
Oracle Allpication Release : 11.5.9
Oracle Purchasing Module.
Oracle Data Base: 11i
Khaled,

Try writing a personalization on the PO screen that adds the following condition to the where clause
"and authorization_status !='APPROVED'
However, I will be careful with a blanket restriction like this. There are situations when you need to modify an existing PO. So you should code some exceptions for this rule.
Hope this helps,
Sandeep Gandhi

Document SIgnature Status becomes invalid after resigning

Hi all,
I have a form with two Document Signature.
When i clear and resign one of the Document Signature it status is invalid.
Please suggest me a solution.
Regards,
S.V.Satish Kumar

I tested the form you posted. Here is what I found, but I am not completely clear on what all your script is supposed to be doing.
Steps
1) I filled in the first "comment line"
2) I signed the first signature field
3) Results: The signature was valid, the document status (see screen shot 1signature_docstatus.gif) reported the signature was valid. The signature staus was valid as displayed in the signature panel (see screen shot 1signature_detail.gif)
4) I added and filled in a second "comment line"
5) I signed the second signature field
6) Results: The first signature was valid, the second signature was valid, and the document status repored that ther were "unsigned changes" since the last signature was applied (see screen shot 2signature_docstatus.gif) The signature statuses were valid with subsequent changes made to the document as displayed in the signature panel (see screen shot 2signature_detail.gif)
Don't confuse the "exclamation" mark icon with "Invalid", it is only a warning to inform you that changes have been made that are not "digitally signed", I suspect your some part of your script is causing this. If you want to have Acrobat\Reader display a green check mark icon, then you cannot make any changes to the document after the final signature has been applied.
If you haven't done so, take a look at the sample I posted on your duplicate post in this forum ( http://forums.adobe.com/thread/492773?tstart=0 ).
If a signature is "invalid" it will display a red "X" icon.
Regards
Steve

How to Change Document Default Status

Hi Everyone, How can i change Document default status for Goods Receipt PO. I want like this
When user create new GR PO the default status for the document should be "Draft"
but now it shows status as "Open"
Thanx & Regards,
Amar

Hi
For this simple create one user for Qualtiy department and when ever u r receving the GRPO make a approval for this document. so the appoaval has to go to qualtiy dep. user, after he auhtorises then Add the doc.
Make Row level UDFin the name of "Qualtity Passed" and Make Drop down as "Passed & Failled or as ur wish" ..
so the quality dep user has to check the qualtiy of each row item d he has to make passed or Failled and tell him to add, for passed qty make invoice, for failled failled make return .
Giri

Sales Order -- Update the delivery Document Credit status using FM or BAPI

hi All,
The requirment is quite urgent...... Actually i am Using a userexit V56FSTAT through VT02N and want to update the credit status through VKM4 Transation. But i require a Function module or Bapi to Update the credit status of the delivery status.
Please do give me suitable Function module or Bapi through which i can perform the VKM4 transation to update the credit status of delivery document....

when we go to vkm4 there we click on the reassign button and save then the status is changed in VBUK table....
so i have to perform this steps through VT02N transation....
Ny ways thanks for the reply,
i guess i require more support fom u all
Message was edited by:
siddharth samal

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error. I am running Mac OS 10.10.1. This only started happening when I installed the update of Adobe Acrobat.

Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave

Why status is change every time after execution of VI??

Hello,
I am not much familiar with Modbus communication,
I got one problem regarding to Modbus that when ever run my vi then after execution the status of DO3 is always changed and jump to the Alarm mode.
In attachment I have attached my screen shots you will get more clear Idea about my problem.
In LHS there is software window and before connection that software with instrument normally I set my DO3 at status mode but when I run my vi in order to check the supply voltage and after execution when I again connect that software then DO3 status always change and its come to Alarm mode.
Can you tell me that why its happen so??
and what kind of changes I have to do in order to avoid this problem....
Thank you very much.
Attachments:
DO3.png ‏386 KB

ok this problem is solve now that i have to make read holding register instead of write...
but still I am confuse about the mesurment of voltage generally i have to set like
1) when (Do3 and datalogger switch both are closed) wired is connected with DO3 and relay on data logger is closed then its shoud show me voltage less then 2V,
2)DO3 is open and datalogger is connected then voltage shoud be near to V+ (12v in my case)
3)both are open then output shoud be 0V
4)datalogger is open and DO3 is closed then voltage shoud be V+
and in above four case i have problem in 1st case only...other 3 are working OK
will you please guide me that is ther any change I have to do in data logger and what king of settign I have to to in order to get desired Output.
I am not much familier with Data logger,i have read datasheet regarding to this and i am using Agilent Data logger 34970A.
Thank you very much...
Attachments:
MeasureDO3.vi ‏33 KB

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Prevent update to document after status is changed

Similar Messages

Maybe you are looking for