Updated to Yosemite, no problem. now iPhoto and iMovie won't open. Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software. User ID and PW works everywhere else.

I am having the same problem. I even changed my password and updated all of my security information. Now it just gives me an error and retry message, which of course also does not work. Went to support and was going to open a chat (seemed the simpler option) and received a message that my support has expired for this serial number unless I want to pay $29.00. So I chose the option to call later, which was the exact time suck I was trying to avoid. Why wouldn't the new operating system also update the apps that were already part of my old platform?

Similar Messages

Trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.

trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.

iTunes version 10.7 requires at least Mac OS X version 10.6.8 if you're running a Mac, or Windows XP Service Pack 2 or later if you're running Windows.
Is your computer up-to-date enough for iTunes 10.7?

I'm trying to update from OSXLion 10.7.5 to OS10.9 in order to use pages s5.2.2. However when I try to update i'm told "no new software available". I bought my mac in 2008. is it too old to accommodate 10.9?

I'm trying to update from OSXLion 10.7.5 to OS10.9 in order to acces pages 5.2.2. When I click "update software" i get message that no update is available My computer is from 2008. is it too old to accommodate OS 10.9?

Thanks Just figured this out when I tried to download Mavericks and got the same message .The reason i wanted to upgrade OSX was to access Pges 5.2.2 because I'm sharing a document with someone who has the latest Pages version. Any solutions? Or I'm just stuck?

App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

I have an Apple TV . My husband has an I-pad 2 and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind for minutes. We checked settings and both I-pads are the same.

I have an Apple TV . My husband has an I-pad 2 and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind for minutes. We checked settings and both I-pads are the same. What can one do to use the I-Pad 2 without any mirroring lag. Thank you All in advance.

try restarting
both ipad http://support.apple.com/kb/ht1430
and atv
restarting ios devices cure 80% of all troubles users have

TS1702 my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as

my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as well. Please help I have set-up over 10 ipods and differents generations and have never had this issue like this, I even have all ratings ristriction unchecked and payment info in itunes so i need help please

but i could download on others ipods in same gen, facebook and ice cream tower, everything i look up and try install always says that for apps so your saying that i can not ever download any apps to this ipod ever againÉ

Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings!

Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings! Anyone else have this issue?

I think its meant to show your name, not your ID.

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

IPhoto error, won't open, says it needs the most recent version

I have an early 2009 mac pro desktop with 6 megs of ram. iPhoto error, won't open, says it needs the most recent version to work but the most recent version won't work either because I have Mountain Lion. I downloaded iPhoto from the App store and the store said "you can't download the most recent version because you don't have Mavericks - would you like to download an older version?" So I said yes and downloaded it. It is actually the Mavericks version that downloads anyway. So I used an older version from my other computer and updated it to version 9.4.3. When I try to open it it says you need the most recent version. My library is on an external drive which was downgraded from Mavericks back to Mountain Lion because Mavericks wouldn't work properly on my computer. Now no version will open.
What can I do? Thank you for your help in advance.

The exact error message is:
THe library "iPhoto Library" cannot be opened. To open it, you must upgrade to the latest version of iPhoto. Then the Quit button is at the bottom of the dialog box.
I did install iPhoto 9.5 when I installed Mavericks, Keep in mind that all of my photos are not on the boot drive but they are on an external drive. I then got rid of Mavericks and did a fresh install of Mountain Lion then I copied the contents of a previous drive that only had Mountain Lion on it. 9.5 wouldn't open in Mountain Lion so I copied an older version from another computer and updated it to 9.4.3. 9.4.3 says you must upgrade to the latest version and 9.5 says you need an older version. So I am stuck now.

HT201210 my iphone says it needs to be restored but when i try to restore it it says it cant be restored and theres an unkown error

My iphone says it needs to be restored but when i try to restor it it says it cant be restored and it has an unknown error

Hi folks, just yesterday i can restore my iphone 4 that have a problem when i restore from itunes, when i do the restore from itnes, always showed me the following error:
01:41:37.0017] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[01:41:37.0017]    Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
[01:41:37.0017]       Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[01:41:37.0017]          Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[01:41:37.0017]             Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
[01:41:37.0017]                Depth:5 Error:Exception at :0:
[01:41:37.0017]           - kBBUReturnTimedOut(8)/16: Pinging timed out
what I did was this: just when I will finish the process, when the status bar is at the end in the firmware, only put the sim card and go back to take out, I do this like 4 or 5 times and the process restoration ends so well. This method I tried it 2 times and 2 times worked. I spent like 10 hours trying to restore iphone without results, until I started watching the logs and the key is when you are upgrading the firmware sends a command to answer yes. And I hope this helps.
This is the line of the log that appears and when the restoration is correct:
amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: YES
Regards.

HT3275 I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image "/Volumes/Salvatore Totino's Time Cap/Lorraine's MacBook Pr

I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image “/Volumes/Salvatore Totino's Time Cap/Lorraine’s MacBook Pro.spars

You may need to reset TM and start with a fresh full backup.
For the particular error see
http://pondini.org/TM/Troubleshooting.html

I added apps by syncing with a Mac. It was under my husband's ACCT. When I tried to update apps on my iPad, it was his account. How do I change this? It only happens when I try to update apps

I added apps by syncing with a Mac. It was under my husband's ACCT. When I tried to update apps on my iPad, it was his account. How do I change this? It only happens when I try to update apps

Apps will always be tied to the account from which they were purchased.
If they were purchased from your husbands account, then they will have to update using that account.

My iphone 3gs has itunes plug displayed on screen and iturnes says it needs to be restored but when i try to click restore it doesn't work what to do now?

HELP,,,my iphone 3gs is displaying iturnes plug on screen and when i plug into computer iturnes, it says it needs to be restored but when i click on recover it doesn't complete the task my phone is stuck with itunes plug on screen. please help

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have my itunes account programmed into my iphone 4g however when I try to update or download an app they come up under my daughter itune account and won

i have my itunes on my iphon4 that shows my acct however when I try to download or update an app it shows my daughters I tune acct and wants her password and I dont know how to change it to my acct

If your daughter's Apple ID appears for updates with a particular app, then it was her Apple ID that bought the app and only her Apple ID can update, redownload and suthorize devices to use the app.
If you want this app for yourself, you will need to delete her licencsed copy of the app and buy the app for yourself using your Apple ID.

I just reinstalled iPhoto and it will not open says it needs latest version but it has it

iPhoto will not load, it says it needs the latest version but when I check there are no updates. I had to reinstall the software,

What version of iPhoto do you have? What version did you have before reinstalling? Why did you have to reinstall?
LN

Updated to Yosemite, no problem. now iPhoto and iMovie won't open. Says I need to update software however, when i try to update indicates my User ID and PW won't work for these two pieces of software. User ID and PW works everywhere else.

Similar Messages

Maybe you are looking for