Updating application to use Application.cfc

I have an application that is using the older style
application.cfm for setting up configuration varibles like DSN and
what not. Of course this way i can just use the varibles as is like
#dsn#.
I am wanting to change my application over to utilize
Application.cfc instead now. It seems to set up my DSN efficiently
i would set this varible up in the onApplicationStart or
onRequestStart. Either way I have to now state my varibles as
#application.dsn# to make them work now.
Is there anyway around this so I dont have to change hundreds
of varibles names!

Implement
<cffunction name="onRequest">
<cfargument name = "targetPage" type="String"
required=true/>
<cfsavecontent variable="content">
<cfinclude template="#Arguments.targetPage#">
</cfsavecontent>
<cfoutput>#content#</cfoutput> 
</cffunction>
You can then change gear in onRequestStart with:
<cfset dsn = application.dsn>
In fact, you can forget about application.dsn and do the
following in onRequestStart:
<cfset dsn = "myDSN">

Similar Messages

Query regarding Update the data using application

I have scenario i need to update single record in the the application and insert into a table
for example
SELECT ContactID,FirstName,MiddleName,LastName,Description FROM Contact
Contact table contains 4 columns as explained. in the application there is one tab called Contact where it displays Above information
and description is non editable.
Now the new requirement has come user can update the description information and save information in a new column say 'Description1'
that means new column needs to be added in the db and also necessary changes needs to be done at the application side
For ex :SELECT ContactID,FirstName,MiddleName,LastName,Description,Description1 FROM Contact
Now when user views the contact table it should display description info by default from 'description' table.
If he edits he should see edited data from 'description1' table.
Can any body guide me please and send me sample update query please, and the logic should if updated data is there display that data from
'description1' table other wise display from 'description' table
Smash126

Hi Smash126,
You need to fire the update command once you have filled the description record. It should happen on the primary key column of the record.
For Example:
UPDATE Contact
SET Description = 'New Description',
Description1 = 'New Description'
where contactID = <<ContactID from application>>
This way both will updated to same value, and next time you will get the updated value.
Here is some ADO.Net links:
http://www.codeproject.com/Articles/1155/Simple-ADO-NET-Database-Read-Insert-Update-and-Del
http://www.onlinebuff.com/article_step-by-step-select-insert-update-and-delete-using-aspnet-c-and-adonet_32.html
Regards Harsh

Application Exception using @Application not working

I'm trying to create 2 business application exception using the @Application annotation on my 2 java exception class. The first exception is a StarException class that extends java.lang.Exception (per ejb 3.0 spec). Below is snippet of the class.
@ApplicationException(rollback=true)
public class StarException extends Exception {...}.
As you can tell that this is a check exception and will rollback transaction when it occurred. I have another exception class called StarRuntimeException that extends java.lang.RuntimeException. This is also mention on ejb 3.0 spec and is useful if you don't want to catch the exception on the server side and just throw it and the client will receive such application exception class. Below is a snippet of the class ...
@ApplicationException(rollback=false)
public class StarRuntimeException extends RuntimeException {...}.
By the way I'm using this exception in my wls 10.3 webservices stateless beans (jax-rpc 1.1). Some of the methods throws these 2 exceptions.
There are 2 problems with this application exception during runtime on the client side.
1. Regarding StarException, the client can catch this exception when the webservice method throws this exception. The problem is that the error messages is null. Tried both getMesssage() and getLocalizedMessage() are all null.
2. Regarding StarRuntimeException, the generated client stubs and artifacts does not even throw this exception, therefore it will not the caught. This exception is wrapped inside RemoteException instead.
Your help are needed. Thanks

Ok. I figured it out. The url rewrite was missing in the config. Put it there and its working now.

I try to upload my application using Application Loader

I try to upload my application .ipa using Application Loader then I receive this error :ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have proper segment alignment and should be rebuilt with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."

This application is compiled with ad hoc option.
Another question: i´m using Flash2014 in Windows8.1 Is possible to upload the application, without a mac?

Using Application Manager, why can't I see my CS5.5 applications, just CS6 lists to buy?

I am migrating my CS5.5 apps from an old XP laptop to a new Win8. Also Acrobat Pro, so I am using Application Manager to make sure I am not offending version copy allowances, but Application Manager is not showing any of the apps on my system, jut CS6 to buy and a couple trials. Where are my current Adobe applications?
Using Application Manager, why can't I see my CS5.5 applications, just CS6 lists to buy?
GMM

Once you save that to a location on your system.
Make sure Acrobat is Quit and then do this:
1. In the Finder go to the "Go" menu.
2. Select Go to Folder
3. Paste this path into the "Go to the Folder:" field
/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro/Contents/Resources/JavaScripts/
4. Copy the file into the JavaScripts folder.
5. Launch Acrobat
Now you should see the menu spoken of in the blog and web page.

I have two apple id accounts ,when i used to update application it used to prompt a default id and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .

i have two apple id accounts ,when i used to update application it used to prompt a default id (the old one) and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .
it just prompt the old id which im not signed in with im signed in using the new id and when i cancel nothing happens and when i try to update applications separately i have the same problem .
im signed in using the new id
the old one is my wife's so i can't delete it
the problem happens when i update all or each application by its own
using ios 5.0.1 on a iphone 3gs
the applications are downloaded using both the new and old id's
any help will be greatly appreciatedِ

These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums - I've asked the hosts to remove yout account ids from your post.
In terms of combining accounts it's not currently possible to do so, nor to copy/transfer content from account to another.

I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks

I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks

Hi Christianjr,
When you say you reset your network settings, what do you mean, exactly?
I saw another post on this issue, and the poster indicated that they resolved the problem by turning off their cellular date option and wifi options in Settings, and then turned them back on.
Also, resetting your phone may help - press the Home and Power buttons at the same time and continue to hold both down until the Silver Apple appears. Once it is back up, click on the update option and see if it fixes the problem.
If none of those things work, then need to have details on what you did to reset your network settings....
Cheers,
GB

After updating to mavericks I have to constantly enter my apple ID for mail, iBooks, iTunes and many other applications that used to be part of my keychain. How can I get my log-in to work again?

After updating to mavericks I have to constantly enter my apple ID for mail, iBooks, iTunes and many other applications that used to be part of my keychain. How can I get my apple ID log-in to work again?

Several times I've re-entered my passwords under Preferences/Internet Accounts/iCloud and it won't save since I've installed Mavericks. Also, the iCloud icon in the left column in Preferences/Internet Accounts/iCloud is greyed out but allows me to click on it to set-up. When I click on iCloud the password is filled out but the "Enable this account" check-box is not checked. I check it, and all seems correct. The icon is no longer grey, the password is correct, the "activate this account" check-box is checked. Then, when I launch mail, notes etc. I'm still prompted to re-enter my apple ID. The log-in loop continues. For years my keychain has worked perfectly. What has changed in Mavericks?

Which to use application.cfm or application.cfc?

Hi,
Just a general question, i have been using application.cfm
for my applications so far. I came across a tag that would be used
under application.cfc, but i tried putting both templates together
in one application and boom, an error showed up.
So, which is better to use with most of the applications
application.cfm or .cfc?
Thanks for any help!
Syed

It's actually a bit easier to use session and application
scope variables with Application.cfc, I think.
Application.cfc has methods for specific "events" or states:
onApplicationStart() -- where to load application variables,
security logic, etc.
onSessionStart() -- initialize session varialbes, etc.
onRequestStart() -- runs at the start of each page request
onRequestEnd()
onSessionEnd()
onApplicationEnd()
onError() -- very nice place to get some good
Application-wide error handling code in place
onRequest() -- be sure to read the notes on this
method...it's a bit different.
Check out the MX7 reference page for Application.cfc:
http://livedocs.adobe.com/coldfusion/7/htmldocs/wwhelp/wwhimpl/common/html/wwhelp.htm?cont ext=ColdFusion_Documentation&file=00000692.htm
CF* (if you're using that yet)
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=Part_3_CFML_Ref_1.html

HT1338 The application can't be updated due to the presence of Mac Osx 10.7.5. I updated the software of my mac to the latest update and still the application can't be updated. I'm using Mac osx lion (10.7.4)!?

The application can't be updated due to the presence of Mac Osx 10.7.5. I updated the software of my mac to the latest update and still the application can't be updated. I'm using Mac osx lion (10.7.4)!?
Regards,
Mhareky

OS X Lion Update 10.7.5 (Client Combo).

HT201401 cant watch any videos neither on safari nor on any video application, it used to work but after i updated to 5.1.1 its not working

cant watch any videos neither on safari nor on any video application, it used to work but after i updated to 5.1.1 its not working, any help ?

Hi..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Now back to the menu bar, click Safari > Empty Cache
Quit then relaunch Safari.
Try one of the sites you had trouble accessing...

Wont update application when using itunes

i cant update my apps. when using itunes,
i update all my apps on itunes but when i apply it on my phone it wont take effect??
PLS HELP!! >.<

Are you able to update the apps using the App Store on your iPhone?

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I have just agreed to software updates on my imac and now can't open my mail. There is a message saying this version of mail isn't compatible with this latest software. I have located the updated mail in the applications folder but it won't open. Help!

I have just agreed to software updates on my imac and now can't open my mail. There is a message saying this version of mail isn't compatible with this latest software. I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk. Does anyone have any suggestions?

Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
In the future, do not move any of the preinstalled applications. Leave them where they are.

New update for Community Help application - version 3.5 now available

Hi: just a quick announcement that the engineering team has released version 3.5 of the Adobe Community Help application. This update is a very significant release that directly addresses a lot of the feedback that we’ve been hearing from the community. The most significant changes include:
Feature
Benefit
1.
Tabbed Browsing
Ability to open multiple pages   from multiple sources simultaneously
2.
Favorites/Bookmarks
Ability to bookmark your   favorite URLs; note: we prepopulate a set of suggested bookmarks for you   based on the products you have installed. Users can of course   add/edit/delete any bookmarks that they choose and can organize them via   folders, etc.
3.
Search/Browse History
Ability to view previous pages   browsed or search results (including previously used filter options, search   collections, online/offline search status, refinements, and more).
4.
Flash Platform ASLR
Ensures developers only   have to download one copy of the ASR and not separate, multiple copies for   Flash vs. Flex, etc.
5.
Revamped local content   download workflow
The entire local content   download workflow has been reworked! We have removed the pop-up dialog   box and moved the “content update” notification to the footer of the app as   well as the homescreen. This ensures an uninterrupted workflow for   users who simply want to access content first and foremost.
6.
Performance improvements
The team has worked especially   hard on improving the start-up and browsing performance by consolidating a   number of disparate server calls into a single initialization service that is   only performed at launch. This enables us to cache a number of assets   and reduce network calls/dependencies.
7.
Silent application updates
Similar to the changes in the   local content download experience, we have also revamped the update   experience for the application itself! Going forward, app updates will   be downloaded in the background without interruption to the user workflow.
8.
Set-and-forget search options
Search options are now sticky   from session to session – for example, if you check the Search Adobe   Reference check box for Photoshop, the CHC will remember those options   the next time you open the app. This applies to refinements too.
9.
Much more!!
Minimize to sytem tray (for PC   users only); upgrade to Flex 4.1 and AIR 2.5; and many, many other   enhancements, fixes, etc.!
Note: many of these features were part of our earlier 3.4 release – as some of you know, we had to pull down that release shortly after launch due to server/hardware issues. So only a few users were able to update at the time. CHC 3.5 is now a general release that will support all users and has been extensively tested to ensure robust performance and stability.
To update your app, simply open the Community Help application from your hard disc or visit our download page on adobe.com:
http://www.adobe.com/support/chc
Please leave your comments/feedback here in this forum -- and feel free to spread the word!

Hi Mark!
I need to install latest Adobe Community Help silently to our corporate desktops. Are there any command-line syntax to do this and where I can download installer package?
Thanks.
BR,
Teijo

Updating application to use Application.cfc

Similar Messages

Maybe you are looking for