Updating ipod

can't put library onto ipod(nano) or playlists that i create. message come up- "Songs on Ipod cannot be updated because all of the playlists selected for updating no longer exist" can anybody help please?

Hudgie, "iPod cannot sync because one or more playlist", 11:33pm Oct 9, 2004 CDT

Similar Messages

  • ITunes updates songs, playlists, etc., but will not update iPod options

    When I plug in my iPod (4G, 40GB), everything syncs as it should --songs, playlists, podcasts, etc. The same is true when I manually choose to update the pod. (i.e. from a context menu or somewhere else in the UI) However, I am unable to change any of the options for the iPod. This includes renaming, choosing disk access, etc.
    When I attempt to make these changes from the "Preferences" dialog, iTunes will say "Updating iPod," etc. but while the changes appear in iTunes, they are not actually made on the iPod itself.
    A similar situation occurs when renaming the iPod. Same as before, iTunes "goes through the motions" but doesn't actually change. The difference is that after the iPod is renamed, it will no longer update until the iPod is ejected and reconnected. iTunes gives an error message saying: "The iPod '[New Name]' cannot be updated. The disk could not be read from or written to." The name listed in the iPod's About menu is still the old name.
    Info:
    iTunes version: 6.0.4.2 (Win)
    iPod firmware: 3.1.1
    iPod connected via firewire
    Gateway 500SE   Windows XP Pro   XP Pro SP2, P4 2.0Ghz, 1GB RAM

    iPod freezing up can sometimes indicate a hard drive failure. To determine this, follow these steps:
    Press menu + select until the apple logo appears.
    With the apple logo still on the screen, press and hold select + rewind. You will soon see a screen that says "IRAM PASS HIT PLAY CONTINUE".
    Press play/pause.
    Using the forward button, navigate to "HDD SCAN" and select it.
    Connect your iPod to the wall adapter.
    Allow sufficient time for the scan to complete, it can take a couple of hours. Results such as a "HDD PASS" that appears in seconds or a minute or two, "SCAN NG" or "RD FAIL" indicate the iPod's hard drive is pooched and the unit will have to be replaced.
    Freezing during sync can also happen if the ports are not high powered USB 2.0.

  • Cannot see music playlists when trying to update ipod

    hello, i've had lots of problems with itunes 7, stuttering music, lock ups etc.- wish i hadn't upgraded!
    latest issue is when eventually i updated ipod to 1.2 software and tried to update it i can see playlists for movies and podcasts but not for music.
    any ideas how to solve please.
    i thinks its bad that apple haven't posted at least a note saying they'll look into these issues

    hello again,
    i know i can use the black arrow to view playlists on my ipod, but there arn't any - i did a restore on this ipod and so it hasn't got any playlists on it now, and i want to get them back on, i only did the restore because i was having the same problem when i upgraded to 1.2 as i'm having now and i hoped restore might solve it but it didn't!
    to get playlists back on the ipod i was hoping to open up the music tab on the large ipod menu and select various playlists from the list inside the rectangle as i used to on itunes 6 and the ones before, but the playlists don't show up for me to select to copy to my ipod, the playlists are still in itunes and i can play them on the computer albeit with bad sound quality since upgrade.
    i can see playlists under the movies and podcast tabs and i can copy these to ipod but no music playlists.
    as i've said i can copy playlist the long way by dragging the playlist from the grey list on the side of the screen and dropping them on the ipod under devices but this will take days
    thanks

  • I was halfway thru updating ipod touch software, got error 1602

    I was halfway thru updating ipod touch software, i walked away from computer and when i came back there was an error "1602" and a picture on my ipod (requesting to connect to itunes?) but WILL NOT WORK AT ALL!
    What's going on?  Seems like a lot of people are having similar problems all at the same time.

    From the article cited at the end of my post:
    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
    http://support.apple.com/kb/TS1275

  • Am trying to update iPod that has iOS 2.2.1 to iOS 4.2 but I am getting the following error message, the iPod could not be restored. An unknown error occured (-1).

    Hi , I am trying to update iPod that has iOS 2.2.1 to iOS 4.2 but I am getting the following error message, "the iPod could not be restored. An unknown error occured (-1)." I would appreciate if anyone could let me know what the problem is and if it is possible how to fix it? Thanks

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Updated ipod nano is now not recognised by windows or itunes

    Hi,
    I am sure there would be numerous people who are in the same situation. Being computer illiterate does not help the situation i tell you. Can anyone please help?

    Welcome to Apple Discussions!
    Is everything up to date?
    iTunes
    iPod Updater
    Updating iPod's Software
    Also, have you seen and tried this?
    iPod missing in "My Computer" or in iTunes for Windows
    Finally, when you connect your iPod to your computer, open My Computer. See if the iPod appears there. If it does...
    iPod shows up in Windows but not in iTunes
    btabz
    PS: Next time, plese post in the iPod nano forums

  • Itunes will not update ipod

    I have added a large amount of music ti itunes, but every time i try and update this onto my ipod i get an error message from itunes. unknown error(-69). has anyone had this before, if so what can I do. I have restored ipod to factory setting but still have the same problem. I have reduced the amount of songs I try and transfer, still the same.
    could this be to do with he new itunes what can i do????

    hi Aubrey!
    i will have my itunes up. then plug in my ipod and it says updating ipod but when it says it is okay to disconnect still my ipod has 118 songs while my library has 176
    hmmm. if Katie's suggestion about the ipod updater software doesn't pan out (it's certainly worth checking), maybe try investigating this possibility:
    http://docs.info.apple.com/article.html?artnum=93499
    love, b

  • Can't update ipod classic!!!

    Can anyone help? I have an Ipod classic 120gb and it says there is an update available but when it tries to install a message says "cannot update this Ipod an unknown error occurred (1436)". Before this ipod i had an old ipod mini that worked fine so i don't think its my computer.
    thanks

    JPBentley wrote:
    Can anyone help? I have an Ipod classic 120gb and it says there is an update available but when it tries to install a message says "cannot update this Ipod an unknown error occurred (1436)". Before this ipod i had an old ipod mini that worked fine so i don't think its my computer.
    See if this article helps:
    Error 1415, 1417, 1418, 1428, 1429, 1430, 1436 or 1439: Cannot restore or update iPod in iTunes 7 or later

  • While updating Ipod we now have a blank screen and when connecting to itunes the ipod is not showing under devices

    While updating ipod touch we now have a blank screen. I have updated itunes but am unable to sync because the ipod does not show under devices. I have tried shuttng down and restarting but only have a blank screen or ap0ple logo. Sometimes the screen shows connect to itunes but that has been it.

    I have the same problem, after upgrading my itouch to iOS6, it doesNOT respond to anything, apple logo stays on the screen all the time and does NOTHING! restore does not work either.... i hope we can get an answer from someone soon... apple support did not have an asnwer.

  • Error message when updating Ipod

    I recently had to reinstall my operating system, so I also just reinstalled itunes and the ipod software (both with the latest versions from apple). but now, everytime I update my ipod it says "unable to update ipod. unexpected error occurred (-4)". All of the songs actually do update to my ipod, but I keep getting this error message. Does anyone know what it can mean? I have reformed my ipod, reinstalled the software...i've done everything the apple website has suggested, and i've now been working on it for hours. Does anyone have any suggestions?

    I take it back....the songs aren't actually updating to the ipod....all the song names appear, but the songs will not play from the ipod. This is extremely frustrating!

  • Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    #1
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    #1.1 n/a because the errror message overrides it
    #2 see #1
    #3 iOS: Device not recognized in iTunes for Mac OS X
    But could be caused by #1
    #4 Covered by previous ones
    #5 Obvious jpegs are photos and thus will not sync as videos. Also see:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    #6 iOS: If you can't back up or restore from a backup in iTunes
    First #7 See #6
    Second #7 You have so many other problems resolve those first
    #8 Resolve other problems first

  • Troubles updating ipod, cannot disconnect, songs erased (tried the 5 Rs)

    hey guys,
    i'm sorry to ask for help with my first post but i've been having some issues with my 2nd gen iPod nano lately. when i connect my iPod to my computer, i get a message in iTunes saying "Songs on the iPod "Han's iPod" cannot be updated because all of the playlists selected for syncing no longer exist". in between the last update i deleted a few playlists, added a few more songs and deleted some songs. i then went to eject my iPod but i get the message "The iPod "Han's iPod" cannot be ejected because it contains files that are in use by another application", when i get this message, the space in iTunes where it displays what you are playing shows "Updating iPod. Do not disconnect.". after trying and failing to find a way to eject it, i just stopped the usb device and unplugged my iPod. then when i tried to use my iPod, i found that everything on it had been wiped and there was nothing on my iPod anymore. so i went to the apple website and tried all five Rs but none of them worked. could someone here please help me with my problem? i'm currently running iTunes 7.0.2 which i believe is the latest version. i'm currently using windows 2000 and it automatically updates every week so i assume i have the latest service pack.
    thanks

    been away last few days, still need help.
    bump bump.
    thanks.

  • Error message when trying to update ipod software

    I have OS 10.3.9 but am getting the following message...,
    You cannot install this software on this volume. This update requires OS 10.2.8 or higher. Please advise. Thanks.

    If you're trying to install the updater onto your iPod directly, you can't. Instead, install the iPod updater onto your hard disk, and then open the /Applications/Utilities/iPod Software Updater folder. There should be one or more copies of the iPod updater inside this folder; double-click the most recent copy. Once the iPod updater has opened with the iPod plugged in, click the Update button and then follow the onscreen instructions to complete the update. If you get a message telling you the updater couldn't find a firmware image, choose the Update iPod command from the Options menu to continue with the update.
    (9571)

  • I can's see my Ipod in Itunes, I have tried updating Ipod & Itunes

    I can't see my ipod in itunes, i have tried, updating ipod but it wont let me. i have tried repairing, removing and re-installing itunes but still no luck.
    please help????

    I answered on your other thread....
    iTunes Does Not Recognize Your iPod
    Does Windows see the iPod?

  • HELP disability to update iPod!

    So I clicked "Update iPod" , but then a popup showed, and said " The iPod cannot be updated. The disk could not be read from or written to. " How am I supposed to fix that?!
    Please help!
    Thank you so much

    See this...
    Disk Cannot Be Read or Written to error when syncing iPod
    btabz

  • I just updated my IPod and my old youtube wasent there. How do I get my old youtube back on my updated IPod?

    I just updated my IPod and my old youtube wasent on. How do i get my old youtube back on my new updated IPod?. PLEASE.. THANKS

    If you updated from iOS 4 or iOS 5 to iOS 6 you have to download the YouTube app from the App store. With iOS 6 it no longer comes with the iOS.

Maybe you are looking for

  • Report not taking the default xml template assigned

    Hi, We wanted to have an excel version of the Depreciation Projection report vis BI Publisher. We changed the output type of the standard report Depreciation Projection report to XML, created an RTF Template, Defined data definition to point to the p

  • Digitasl Signature in Word not retained in PDF

    Word 2010 Acrobat X 10.1.9 A PDF generated from a Word document with multiple digital signatures does not display one of the signatures in the PDF output when using the Acrobat toolbar. Three on the previous page display and one of two on the next pa

  • Sap Query Web Reporting - Issues with accents

    Hi, We was using Web Reporting for Sap Querys, throw this tool we can generate automatically web reports. When we go to generated web report, selection screen show us character � instead accent letters. In addition to this, generated web repor

  • Date Migration from IBM DB2/400 V4R3M0 to Oracle 11.2G

    Dear ALL< We have a requirement for Date Migration from IBM DB2/400 V4R3M0 to Oracle 11.2g. Can you guys please share your experiences with similar activities done in the past ? We do not have environment at present to try out with Oracle Migration w

  • Recapturing footage outputted through Adobe

    Back in the day, when I used to export 24p widescreen footage off of CS3 through firewire (export to tape) onto a mini dv tape, it played fine and still does.  But for some reason it won't let me recapture it without playing back scrambled or sometim