Updating the Master data Infoobjects attributes from the Portal

Dear All,
There is a requirement where through portal i want to retrive the master data infoobject ( based on the value seleceted for that infoobject by the user ) and its attributes in the portal , edit them and save them back so that the updated values goes back to BW master data infoobject data base tables and updates the value.
Eg . I have Natural Account master data infoobject in the BW with attributes fucntional area and expense center.Based on the user selection of any values for the Natural account lets say 01110 , then for 01110 natural account the portal should display the correspoding attributes values of fucntional area and expense center.Lets take this values as 10 , 20 respectively for fucntional area and expense center . What I want to do now is to change these attrbute values to 30 and 40 and I would like to save it back as the changed attribute values for that natural account for 01110 with new attribute values 30 & 40 respectively for fucntional area and expense center .
Is this possible through portal and BW?
Any idea on this would be appriciated.
Regards,
Ankit

Hi Ankit,
this is a quite tough but not impossible requirement. Maintaining Master data is possible with Visual Composer and some function modules (at least that's one way I know). However it could be a bit complicated maintaining attributes Master data depending on your data model. This How might help getting familiar with this topic:
Maintaining BI Master Data with SAP NetWeaver® Visual Composer
Good luck.
Brgds,
Marce

Similar Messages

Error in DTP (The master data is deleted in the Background)

Hi,
while loading the data to Data target (0chrt_acct_attr) through DTP...... I got the Error " The master data is deleted in the Background". Plz advice me it is an urgent issue.

Does the log in SLG1 say any more details?
Use RSDMD as Object & MD_DEL as Sub Obj. Leave the other field to *.
Is it happening for 1 specific object or for all? What type of data (attr or text)?

How to load this value into the master data display attribute

Hi ,
Please share me the knowldege how to load this kind of data into master data display attribtes ..
Raj + Ravi Ltd (PCG: 13592)
While loading this data ,i got the error message stating that '+' should not be part of the attributes and () should not be part of the attribute ..but i need all the information as it is available in the example data .
Do i need to maintain RSKC Settings else some other things required ..
Please guide me ..
Regards,
Raj

HI,
Maintain these symbols in RSKC and try to reload the data....

I have lost my iPhone 5. Is it possible to load the backup data (including notes) from the iPhone backup to my iPad (air)?

Hello I had an iPhone 5 that i have now lost. I'd like to access the backup for that phone, particularly the notes data. Is it possible to access the backup data via my iPad air?
If not do i have to wait until i get my new iPhone then restore from the backup?
if someone could point me in the right direction ASAP?
many thanks

Hello Jim
just thought id let you know that i bought the iexplore software, downloaded it and solved my issues in less than 5 mins!
great tip, thanks for your help.
regards
Charles

Data load stuck from DSO to Master data Infoobject

Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.

Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh.

How to find the size of the master data objects in the BW system?

Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AM

Hi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal

Error while loading the master data

Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.S

Hi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1.

Measure using UseRelationship not working well when sliced with attributes from the same table

Hi,
I have Measure created using the 'UseRelationship' Function, which uses a different datekey to link to the DateDim than the one the table is directly related by. The measure works as expected except in one scenario.
If I browse the measure using an attribute from the same fact table then the attribute is filtered using active relationship whereas the measure is filtered using the inactive relationship as shown below:
FACT(2 rows)(Active Relationship to Date using DateKey1)
SNo     DateKey1     DateKey2     Geo        Amt
1         20100101     20120101    India      100
2         20100101     20120101    US         200
AmtMeasure:=CALCULATE(SUM([Amt]),USERELATIONSHIP(FACT[DateKey2],'Date'[DateKey]))
If I browse the above measure in excel, with Year selected as 2012, I get 100+200=300. Now if I drag the Geo attribute against the measure I get 2 rows with 100 and 200.
If I do the same in a power view report I don't get any results after dragging the Geo attribute, whereas I get the correct value of 300 without the geo attribute. I checked the DAX query which the power view generates and figured this is being caused because
there are no rows in the table with DateKey1 having year 2012. I understand why this is happening this way in a DAX query and not in MDX, but shouldn't both behave in the same way and what is a work around.
Thanks,
Sachin Thomas

Sac, is this still an issue?
Thank you!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

I need tables for prepare the master data templates for PM

Dear Experts,
can we prepare the master data templates by using the tables? if its possible means how we can prepare and what we have to considered ? is it right way or wrong?
please suggest me to prepare the masterdata templates for ever use. if any small corrections we can correct it at usage time.
please help me
thanks a lot in advance

Dear Jalu,
Master data Templates have to be prepared based on Client's requirement after understanding their Business.
For example, in Equipment master there are ~ 60 to 70 feilds, no client requires all of them. Some are inherited.
After client requirement freezing, record LSMW and based on that prepare the Template.
Regards,
MLN Prasad

Master data and attributes?

Expert's,
Please go through this scenerio and answer the questions?
I have master data ZSTAT for this we have mainitaned the attribute called ZATT.
The data for these is not coming from source.So there is routine in UR which manipulates and updates the ZSTAT as I,N and T based on the conditions given in the UR.But Now If I look at the attribute ZATT I could see only I and N data.How this has maintained.This had done by our onsite folks.My doubt is How did we get only two values for attibute when we are having 3 values for Master data?
Points will be definitely assigned for the right answers?
Thanks in Advance.
Vasu.

Hi
Pls clarify
For the cube, the data for I , N and T are available
For attribute, for T not availabe..is it so?
Have you checked in the master data table ....every master data table have values of attribute stored in the next column
Go to the master data infoobject of the attribute and see whether all I, N and T are there
Regards
N Ganesh

Attr Change Run Master Data Infoobject PChain

In the master data process chain process type Attribute Change Run which is usually at the end of the chain updates the changes in the master data infoobjects.
The Chain is usually designed with full infopacks and say if it is scheduled every night , isn't it loading the master data again ( duplicating ) and again even though considering the process type Attribute Change Run at the end.
Is it like just the attribute change run is executed for updates ?If thats the case why do we need a process chain for Masterdata...if its only one time full ..that can be done manually right?
Am I missing something here ...?

If you look at the detail in the Monitor for a Master Data load, it will tell you how many recordssent from R/3 and how many records were updated and inserted.
As far as static master data that deos not regularly have new records or changes - you're right you don't need to load those objects daily, they could be loaded perhaps monthly.
You might consider balancing how fancy you try to get with breaking up master data into different groups, loading some daily, and other sweekly, others monthly, etc. In our case we use to have a fairly elaborate master data load schedule, loading someobjects 1st Tuesday of the month, others 2nd, Tues, others 3rd etc, and then we had weekly loads and dailys. When I began to review the run times involved, it was apparent that the various monthly loads, in total, ran less than 10 minutes, so I just consolidated the 4 differently monthly maser data loads and the weekly loads all into a single process chain. While much of the this master data doesn't change much, it was much easier to just schdule mastr data either daily or weekly, rather than getting too elaborate.
Now if run time of master data loads or change runs sarts to become an issue, then you might have to adopt a more elaborate schedule. It really depends on your environment.

Error while loading master data to attribute ZMAJORGU(Major organisational unit)

Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
    Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
    the attribute/characteristic ZMAJORGU &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
Kiran

Ram
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

Master data infoobject can't handle duplicate records after SP10

Hi
I am trying to load master data which happened to contain duplicate records from the source system. In the DTP of the master data infoobject, I have ticked the 'Handle Duplicate Record Keys' checkbox. After executing this DTP, the duplicate master data records were trapped in the Error Stack. I am expecting overwriting of the duplicate master data to take place instead. I understand that this error was fixed in Note 954661 - Updating master data texts when error in data package which is from SP9. After applying Support Pack 10, the master data infoobject just can't handle records with duplicate keys.
Please let me know if you manage to fix this problem.
Many thanks,
Anthony

Found a fix for this problem. Just applied this OSS note Note 986196 - Error during duplicate record handling of master data texts.

Master Data InfoObject why it invalid ?

I do have master data infoobject 0JOB . The extraction are Delta. A lots of record under this infoobject masterdata contained invalid masterdata.
Why this thing happen ?? Why its become invalid
Are this cause of :-
1) under R/3 they will delete this 0JOB which no longer been used? ( Delta not capable to delete this JOB once it deleted under r/3 )
Sorry I'm still tyring to understand .. anyone could help me to explain more detail..
Point for sure..
Thanks..
Edited by: Edi Erwan Abu Talib on Nov 23, 2008 4:04 AM

Hi Debjani..
Thanks for your reply .. I do not have any problem while extraction .. PSA do not have any problem .. I'm using Bi7.0 .. here the situation..
under infoobject 0JOB , maintain master data .. I view the data under this infoobject ..
JOB LANG To Valid from Job Group EEO
50000000 - 31.12.9999 01.01.1000
50000003 - 31.12.9999 01.01.1000
50000005 - 31.12.9999 01.01.1000
50000007 - 31.12.9999 01.01.1000
50013218 EN 31.12.9999 01.01.1900 1B AC
Here I get confuse ..JOB (50000000 , 50000003, 50000005 , 50000007 etc) which do not contained LANG and other related field such Job Group / EEO etc .. do not exits at r/3 , .I do check used PO03 / or at rsa3 , data not exits, why it been view under 'Maintain masterdata ' for 0JOB infoobject.
Hope you guys could help me to elaborate more about this situation..
Edited by: Edi Erwan Abu Talib on Nov 23, 2008 9:50 AM
Edited by: Edi Erwan Abu Talib on Nov 23, 2008 4:45 PM

Using Attribute of a Master Data InfoObject as a characteristic in the DSO

Hi
I have "ARBPL" field in the DataSource. And i map this source filed to "0WORKCENTER" Infoobject in the DSO.
This "0WORKCENTER" has an attribute '0WRCT_CATG" . I want this attribute "0WORCT_CATG" needs to use as a characteristics in the DSO.
So how can i populate the data for this attribute "0WORCT_CATG" from it's master data infoobejct "0WORKCENTER" in the DSO .
So please let me know
kumar

Hi Ravi Kumar..
U have ARBPL field in ur datasource and u r maping this field to a system defined infoObject 0WORKCENTER koooooland the same time u mentioned 0WORKCENTER have a attr 0WORCT_CATG..is their any field in ur datasource that defines(maps ) this infoObj 0WORCT_CATG. Map that field with the attr infoobject at info source level.
If u dont have any relevant field in the datasouce to define this 0WORCT_CATG object.. proceed with update routine..or start routine(transfer rules/update rules) according to ur convenient.

Updating the Master data Infoobjects attributes from the Portal

Similar Messages

Maybe you are looking for