Upgradation procedure from MI to Netweaver Mobile 7.1

Hello Friends,
Can some one please share your's Upgradation experience,
my customer who is running on MI 2.5 want to upgrade to Mobile 7.1.
From where we should start ,please give us guideline .
Thanks
Satish

HI Satish,
NW Mobile 7.1 is still not out in the market. So, you can plan the upgrade after the release
you can look into
http://help.sap.com/saphelp_nwmobile71/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
to find out Whats New in SAP NetWeaver Mobile 7.1.
Regards
Divya

Similar Messages

Upgrade procedure from 4.6c to ECC 6.0

Hi
I had gone through SAP solution browser tool and observed the differences for 4.6C and 6.0
Can u please let me know How to start and end the upgrade project i.e sequence of activities.
1) should the configuration be done in ECC 6.0 same as 4.6C?
2)master data upload?
3)Z-objects movement from 4.6C to 6.0....?
4)Open PO's and stock upload......in ECC 6.0 ?
5) what are the precautions to be taken before Go-live?
Please send any links for upgrade procedure from 4.6C to 6.0 i.e sequence of activities.........
Thanking you
Deepak

Hi,
About your questions:
1) should the configuration be done in ECC 6.0 same as 4.6C?
The configuration (if you mean how the system is configured from the Basis point of view) will be almost the same as you had in 4.6C. Of course you will find new aspects you don't have in the old version (for example the integrated ITS, ICM, etc.), but you will have the system running after the upgrade.
2)master data upload?
Master data will be adapted to new version during the upgrade. Unless you need fresh data, you won't need to reload master data.
3)Z-objects movement from 4.6C to 6.0....?
Z objects are not touched by the upgrade process. It's your responsibility to keep them running after the upgrade.
4)Open PO's and stock upload......in ECC 6.0 ?
Same as question 2). Business data remains in the system after the upgrade.
5) what are the precautions to be taken before Go-live?
It is recommended to carry out functional tests, as well as connection tests with external interfaces. In any case, you shouldn't take any special precaution, at least not so different from those you would take in a normal installation.
Regards
Francisco

Proper upgrade procedure from 2007 - 2013 with Fab 40 templates

I'm currently migrating my MOSS 2007 server to 2013 I have gone through all steps to detach and upgrade to 2013 within my test environment, started by migrating to 2010 then from 2010 to 2013 which I was able to get the sites functional however I'm running
into some problem with solutions that are no longer available for 2010 and 2013 sharepoint sites.
My existing 2007 server was based on the FAB40 templates and when I upgrade I have some problems where the templates are not found and I end up with some Correlation ID errors on a particular sub site which I'm having a hard time resolving because of missing
solutions and I'm not able to access that site. I'm also seeing various errors where I'm missing templates when I run the 2013 health check so I'm trying to figure out what is the best approach to resolve these issues before I perform the migration? I have
to keep the 2007 server in production until the migration is complete so I can't just uninstall the solutions from the exiting site.
How are people handling the FAB40 template problems?
Missing Site Templates
The following sites are using templates that are not yet supported after upgrade:
http://tagsp01/admin/admin/vacation - #0
http://tagsp01/admin/confroom - #0
http://tagsp01/admin/finreport - #0
http://tagsp01/cows - #0
http://tagsp01/finance/expenses - #0
http://tagsp01/helpdesk - #0
http://tagsp01/hr/jobs - #0
http://tagsp01/is/development/bugtracking - #0
http://tagsp01/is/sysadmin/asset_tracking - #0
http://tagsp01/is/sysadmin/callcenter - #0
http://tagsp01/is/sysadmin/kb - #0

I just wanted to elaborate on what Aries said, since I had the same issue regarding missing site templates occurring during the site collection upgrade health check.
I had noted that the solution package that my site templates came from were installed in the 14 hive, but not in the 15 hive. So, after seeing this blog entry, it became clear that I would have to install the site templates to the 15 hive to get rid
of the missing site templates issue during the upgrade health check.
The following blog explains what happens when a solution package is installed.
http://blogs.technet.com/b/mspfe/archive/2013/02/04/planning-deployment-of-farm-solutions-for-sharepoint-2013.aspx
As of the writing of the blog, to install the solution package to both hives, you must install the solution package using the Install-SPSolution command with the CompatibilityLevel option set to {14,15}. Otherwise, unless specified in the solution
manifest.xml file, the solution will be installed into the 14 hive for backward compatibility.
You would add the solution using the standard:
stsadm -o addsolution -file "WebPartSolution.wsp"
If you already added and deployed it the stsadm way, you can retract the solution using stsadm -o retractsolution and then deploy it again using the Install-SPSolution command with the compatibility level specified to {14,15}.
The Install-SPSolution command I used utilized the following options:
Install-SPSolution -Identity "WebpartSolution.wsp" -GACDeployment -force -CompatibilityLevel {14,15} -WebApplication
http://moss2013URL
Doing this got rid of the missing site templates error for me and allowed me to proceed with the SiteCollection upgrade.
I will probably have to make modifications to my site templates and make a 2013 version of my solution packages. However, during the initial upgrade of my farm to 2013, this will at least give me a chance to see how the site template
looks in 2013 mode.

How to upgrade tracks from NetWeaver 7.0 to 7.3?

Hello!
I'm trying to create a Web dynpro 7.3 track from a 7.0 track. It's for a sandbox install of 7.3 so I don't want to change the current track or SC but I want to include all my developed code for testing purposes.
I've read about track migration here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8061e964-2036-2e10-ee9d-ef21d174fdd9?quicklink=index&overridelayout=true
and here:
Migrating/Upgrading NWDI from 7.0 to CE 7.1
but it's missing some important information. How do I get my current code into the new track? It just says "Import your SCs and required SCs in the new track in NetWeaver 7.3".
My old track is called Extern and contains a SC called ExternSC. The new track is called Portal73 but which SC should it contain?
I can't check in my old SC without adding a dependecy to it.
Should I create a new Extern73SC with dependency to the old one? Then it wants to check in the old 7.0 dependencies as well.
I want to be able to create projects from the old DCs so they can be migrated to 7.3 as well.
The forum thread above suggest changing the dependencies of the current SC to 7.3 components and add that to the new track, but that would break my current 7.0 track, right? I tried to make a new version of the SC with the same name but I still couldn't import the existing code.
Is there a more complete source for track migration?
Please help me if you can
Regards,
Richard Linnander
Edited by: Richard Linnander on Jun 30, 2011 10:39 AM
Edited by: Richard Linnander on Jun 30, 2011 10:41 AM

Thank you for your answer!
Just to make sure I do this correctly.
I have a product called ExternProd (1.0), and an existing SC called ExternSC (1.0) that belongs to the product.
Do I need to create a new product version as well?
Otherwise I do this:
In Software catalog in SLD on the NWDI i click "new software component version"
In the dialog box I select ExternProd 1.0, unit Extern 1.0, enter vendor, name ExternSC and version 2.0 and click create.
I define dependencies to SAP SCs but NOT to ExternSC 1.0.
Now if i go to the product I see two software units for ExternProd 1.0.
I add ExternSC 2.0 to my track and then I should be able to forward the old SC and import it in development, or should it be exported and checked in?
Is this what you meant?

Regarding the migration from mi 2.5 to Netweaver mobile

Dear All,
We need to migrate an mi 2.5 to netweaver mobile 7.1. I have read a white paper by SAP for the same which has six step approach. Even i have read certail documents which has certain clauses like if a filter has placed on two fields in mi 2.5, that rule cannot be migrated automatically, which need to be created manually.
So i need to understand the following things.
1. What are limitations/clauses in the modelling regarding the migration to netweaver mobile?
2. As there are data objects, associations, dependancies, distribution model, distribution rules in netweaver mobile, what are the corrosponding things in mi 2.5, to acheve the data distribution dynamically and depandancies between the syncbos?
3. What are all things i need to study regarding the current implementation of mi 2.5 in terms of data modelling and mobile application?
4. LImitations of mi 2.5/7.0 over Netweaver mobile 7.1
Can anyone please help me in this so that it will be great help for me.
Regards,
Kiran.

Thanks Ajith,
This is really good piece of input. Did you get any chance to gothorugh my word document. There are couple of clarifications what i have need is mentioned in that with the screen shots.
Clarifications are:
1. There are filters created for certain syncbos. They seems to be dynamic filters, so where can i see in the current mi 2.5 system where these values like ME-SYNC_USER is configured. This is the field that they have used for the dynamic filtration of data.
2. And there are no syncbos which have u201CFiltered by referencing Syncbosu201D enabled with the reference to excel and screenshot in the word document. Is this the way to look at related syncbos and if yes does it mean that there are no relations between the syncbos in the current mi 2.5 system?
3. Even though there are entries in merep_408 table for certain syncbos but i am unable to view the syncbo exits using the transaction merep_sbuilder. It shows the exits for ZEFACTIVITY but not for the others. What does that mean, is that mean exits are not maintained for the other syncbos.
4. Is S01 and T01 syncbos converted to Data Objects in Netweaver mobile. If they are converted, can you please explain clearly what is meaning of not supported and unable to use the capabilities of netweaver mobile 7.1, bacuse i am unable to understand.
5. Is the laptop client O/S dependant or if we install the respective jvm then does the same client run on all O/S.
6. While synchronization from the standard client it hits standard sync service provided by SAP, if the concurrency is more or overloaded, then what will be the alternative? In this i am not talking about load balancing. Can we do any routing to other server, is that the network configuration and any configuration done at DOE level?
I am really bombarding you with so many clarifications but can you please help in this so that it really helps me alot.
Regards,
Kiran.

Upgrade R3 from 4.6 to ECC5.0 and BW from 3.3 to 3.5 (Netweaver 04)

We are looking at upgrading R3 to ECC5.0 and upgrading BW from 3.3 to 3.5 using NetWeaver 04.
We would like to know if there are any dependencies here and if we do each upgrade in isolation what the likely impacts are.
So, if we upgrade the R3 side first what will we need to do to ensure that BW remains operational and vice versa if we upgrade BW first what will happen on the R/3 side?
Which route would be prove to be more cost effective - in terms of time and resource usage? Will work need to be repeated, etc ....
Any/all advice very gratefully received. Many thanks.
Sally

.

Error Stored Procedure Upgrading database from SBO 2007A PL42 to SBO 8.8

Hi,
When executing the SBO 8.8 PL00 upgrade procedure for databases for an "old" database 2007A PL 42, upgrtade stops whith an error concerning a missing stored procedure "_TmSp_CorrectWrongDocLineNumberInOINMForIPF which is not found".
The error details says that it occurs on "Stock Updates" step (just after Checks for Payment) and log file gives the following message here after.
Does anybody have an idea how to upgrade the 2007A database ?
Thanks
Error message in log :
Upgrade Error Technical Failed to call Stored Procedure TmSpCorrectWrongDocLineNumberInOINMForIPF
Edited by: Michel Diepart on Oct 24, 2009 10:55 PM

Hi Paul,
Thanks for your prompt response on a saturday and so late in the evening
Concerning the Stored Procedure, I would like to delete it but ... it doesn't exist and that's the problem...
No such procedure in my database (programmability / Stored procedurefolder in SQL).
When searching on the forum about this stored procedure, no result.
Does this stored procedure have a link with something regarding adjustment in stock ?
"Stock updates" : what table is it in SAP B1 ? If necessary I could save the table, create a sql query to re-create it after delete and try to restart the upgrade procedure but I don't know what is the related table...
I will also try with another 2007A PL 42 database to see if it works.
Do you know if anybody has already try to upgrade a 2007 PL42 dabase to SBO 8.8 ?
Best regards

Upgrade Mobile 2.5 to SAP Netweaver Mobile 7.1

Hi,
We have to create the file .SDA with NWDS following the steps of the Sap Note 1548566 - MAM Application Start Error,then deployment the application in Sap Netweaver Mobile 7.1 Cliente, but when we try to start the application it show us the follow error:
Error: 500
Location: /campofrioapp/campofrioapp/Menu.do
Internal Servlet Error:
javax.servlet.ServletException: cannot find message associated with key : dispatcher.forwardException
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:238)
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
     at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:423)
     at index._jspService(index.java:62)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Unknown Source)
Could you help us to solve this error please?
Best regards
Fernando

Hi,
most likely your precompilation of JSP files did not work. While creating JSPs, check if they are really there - or if the resulting Java code is empty.
In that case you would get this error.
Hope this helps.
Regards,
Oliver

Upgrade from individual to family mobile me creating a bug

I created my site with iweb and have published successfully for over a year. Now that we upgraded to the family pack for mobile me instead of the individual account, when I go to publish I get the dialogue box saying that I have to sign in - but I click sign in and it opens the system preferences and takes me to the mobile me box that shows that i am signed in already. I tried signing out and signing back in, but no luck.
any suggestions are appreciated
thanks!

kuttner wrote:
I tried signing out and signing back in, but no luck.
Did you try signing out and then in with an invalid member name & password? ...When that expectedly fails, then try your real name & password.
If still no luck, MobileMe live chat support is now 24/7 — see this announcement. Other Apple support options are here.

EHP1 for Netweaver Mobile 7.1 available or not?

I am trying to do a install of Netweaver 7.1, and for that reason I would like to have the latest version available. According to the installation and media guides, there should be a Install Master and Kernel 7.11 available but I am unable to locate this in the software distribution center. I can find it for Netweaver PI 7.1, but not for Netweaver Mobile. Anyone who knows more about this?
I could of course install 7.1 and then the EHP1 as an upgrade, but I already installed SQL Server 2008 and NW 7.1 can not be installed directly on MSSQL 2008, so I thought it woudl be easier to just make one install and save a lot of time and extra steps.

I have to come back to this topic, because of a reply I got in another thread some time ago from Mr Stefan Wawrzinek:
"SAP NetWeaver Mobile Always Connected is supporting Stylesheets with NetWeaver 7.1 EHP 1."
My goal by installing Netweaver 7.1 Mobile is to test the "Always Connected" functionality with mobile devices. The tests I have done with Netweaver 7.0 are very disappointing. Either I get good performance but absolutely zero control over the look & feel (using parameter PieClient), or I get terrible performance but a good looking interface (stylesheets and javascript too heavy for mobile devices).
So it seems I will anyway have to wait for EHP1. But what is puzzling me is the fact that there is no Java application server in Netweaver Mobile 7.1. Does that mean that SAP now supports the parameter PieClient for mobile-compatible rendering of HTML also for ABAP WebDynpro applications? With NW 7.0, it was necessary to use Java WebDynpro to use the PieClient parameter.
Any insight greatly appreciated!

Download SAP Netweaver Mobile 7.1

Hi Friends,
Where can I get SAP Netweaver Mobile 7.1?
Is it available on Service Market Place? If yes from where i ccan download it?
If no, then what is the procedure for getting DVD's from SAP?
Pls help me. Its urgent.
Thanks and warm regards
Purnendu

Hi
   Since Mobile 7.1 is in rampup, not sure if you have access to download. But anyway here is the link to download 7.1 from SMP.
http://service.sap.com/swdc
-> SAP Support Packages
   > Entry by Application Group
    > SAP NetWeaver
     > SAP NETWEAVER
      > SAP NETWEAVER MOBILE 7.1
       > NW MOBILE CLIENT SETUP 7.10
        > Win32
Also dowload
http://service.sap.com/swdc
-> SAP Support Packages
   > Entry by Application Group
    > SAP NetWeaver
     > SAP NETWEAVER
      > SAP NETWEAVER MOBILE 7.1
       > NW MOBILE ADMINISTRATION 7.10
         > OS Independent
Hope this helps.
Best Regards
Sivakumar

Migrating/Upgrading NWDI from 7.0 to CE 7.1

Hi,
Currently we have application developed on NW 7.0 (Web Dynpro, J2EE, EJB etc) and we have NWDI 7.0 for code repository.
Now we are planning to migrate the NW 7.0 (Web Dynpro, J2EE, EJB etc) to CE 7.1 (we have documents & procedure to do this).
My question is:
1. Does repository NWDI 7.0 supports for all kind of DC/applications if we migrate NW 7.0 (Web Dynpro, J2EE, EJB etc) to CE 7.1, If not what are the chanllenges?
2. Is it required to upgrade repository from NWDI 7.0 to NWDI CE 7.1? If so how we can achieve/migrate the code to NWDI 7.1
Please suggest.
Regards,
Patana

Hi Patana,
Let me give you some background first...
*1) Yes, NWDI 7.0 will support all the developments that you will be migrating to CE 7.1
2) There is no 7.1 version of NWDI, that means you ned not worry about NWDI version as, it is just a platform that acts as repository for your source code and version control.*
So you don't need to upgrade your NWDI.
But wait it doesn't mean that you don't have to upgrade anything from NWDI side .
As your Application Server will now be running on 7.1 version, you will have to get a compatible CE 7.1 version of developer studio too.
Also the Tracks that are present in your NWDI 7.0 version will be required to be upgraded with the latest build time dependent SCA files of the 7.1 version too.
This is a step-by-step guide for setting up NWDI for Composition Environment.
Link:[HOW TO SETUP AN NWDI TRACK FOR COMPOSITION ENVIRONMENT DEVELOPMENT (SAP NETWEAVER CE 7.1)|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f?quicklink=index&overridelayout=true]
To update all the tracks with the latest .SCA files, follow the below mentioned steps...
1) you need to copy all the standard .SCA files of 7.1 version from the path /usr/sap/<SID>/SYS/EPS/buildarchives/ as mentioned in step 10 of the above manual to the CMS transport directory (<specified in the domain tab>CMSinbox) directory in order to make these dependencies available for your tracks.
2) Then, in SLD you have to modify all your software components that are used in track and replace all their build time dependencies to the 7.1 version.
3) Update the CMS,
4) Remove and add the tracks SCs back for your track.
5) Save the track, while saving always choose Save & Re-import button.
6) Check-In the latest 7.1 version SCA into Development and Consolidation tab.
You have repeat this for all the tracks.
Please revert in case of any further clarification.
You can also refer to the thread Re: source code of a track nwdi, for understanding how NWDI works under the hood.
Regards,
Shreyas Pandya

Upgrade IDSM2 from 4.1(5)S225 to 5,1 using application partition

can i upgrade an IDSM2 (WS-SVC-IDSM2-BUN)in a 6513 from 4.1(5)S225 to 5.1 by copying the 5.1 application partition to the sensor
[from the cisco userguide]
Chapter 10 Configuring the Sensor Using the CLI
Reimaging Appliances and Modules
Reimaging the IDSM-2
This section contains the following topics:
Catalyst Software, page 10-124
Cisco IOS Software, page 10-126
Catalyst Software
To reimage the application partition, follow these steps:
Step 1 Obtain the application partition file from Software Center on Cisco.com and copy
it to an FTP server.
Step 2 Log in to the switch CLI.
Step 3 Boot the IDSM-2 to the maintenance partition:
cat6k> (enable) reset module_number cf:1
Step 4 Log in to the maintenance partition CLI:
login: guest
Password: cisco
Step 5 Reimage the application partition:
[email protected]# upgrade ftp://user@ftp server IP/directory
path/image file
Step 6 Specify the FTP server password.
After the application partition file has been downloaded, you are asked if you
want to proceed:
Upgrading will wipe out the contents on the hard disk. Do you want to
proceed installing it [y|n]:
Step 7 Type y to continue.
When the application partition file has been installed, you are returned to the
maintenance partition CLI.
Step 8 Exit the maintenance partition CLI and return to the switch CLI.
Step 9 Reboot the IDSM-2 to the application partition:
cat6k> (enable) reset module_number hdd:1
Step 10 When the IDSM-2 has rebooted, check the software version.
Step 11 Log in to the application partition CLI and initialize the IDSM-2.
See Initializing the Sensor, page 10-2, for the procedure.
IF NOT, THEN IS THERE A SHORT CUT FROM 4.1 to 5.1 ?

Just wanted to clarify some things.
As Scott has already confirmed you can re-image using the method described and following Scott's advice on what additional updates to install.
BUT understand that any configuration you have your 4.1 sensor will be lost during that method of re-imaging to 5.1.
Another alternative is to first upgrade from 4.1(5)S225 to 5.0(1), and then to upgrade to 5.1(1).
The upgrade to 5.0(1) will convert the 4.1 configuration into a compatible 5.0 format.
I saw another post you made implying that you had to downgrade back to 4.1(5)S189 to do the 5.0(1) upgrade. This is not the case. You can upgrade directly from your current 4.1(5)S225 to 5.0(1).
You can install the IPS-K9-maj-5.0-1-S149.rpm.pkg file directly on your current 4.1(5)S225 sensor.
When S225 was installed on your 4.1(5) sensor, it also placed in storage the corresponding S225 update for your 5.0 sensor.
So when IPS-K9-maj-5.0-1-S149.rpm.pkg is installed on the sensor it will detect that stored off S225 for 5.0 and install it at the same time.
So once installed you will be immediately at 5.0(1)S225.
Once at 5.0(1)S225, then you can upgrade directly to 5.1(1) using the IPS-K9-min-5.1-1d.pkg upgrade.
(NOTE: 5.1-1d file was created to fix some upgrade bugs, but still installs the same 5.1(1) files as the original 5.1(1) upgrade package).
So you will wind up at 5.1(1)S225.
Now at this point I would recommend installing at least one later signature update (S226 or higher in your case) BEFORE installing the 5.1(1p1) patch.
And AFTER the signature update, then install the 5.1(1p1) Engineering Patch (contact the TAC for this patch).
Because of this specific upgrade path, the best way to avoid some issues is to install at least one signature update before installing the 5.1(1p1) patch. The signature update helps to ensure the sensor is ready for the 5.1(1p1) upgrade. Some of the files needed for the 5.1(1p1) upgrade have been seen to not get carried forward properly in the upgrade from 5.0(1) to 5.1(1), but a signature update corrects those issues.
NOTE: This precaution of installing the signature update BEFORE the 5.1(1p1) is only needed when upgrading from 5.0(1) to 5.1(1). If imaging directly to 5.1(1) using the maintenance partition, then the 5.1(1p1) can be installed before a signature update without an issue.
Once 5.1(1p1) is up and running and monitoring packets and generating alarms, then additional signature updates can be installed afterwards.

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

Error while fetching Stored procedure from JDev DB Adapter

Hello
I am facing a problem while configuring stored procedures from Jdeveloper using DB Adapter. I am using Sql Server 2005 as my database,Jdeveloper version is 10.1.3.1.Bpel Version is 10.1.3.3. Connection to the Sqlserver 2005 database is fine, but it shows only views and tables. I get the following error message when I try to add the sql stored procedure call
"An error occured while obtaining the database schemas.Verify that the database connection is valid , and is supported"
Can someone help me please.
Thanks,
Phani
Edited by: Phani on Oct 28, 2008 11:30 AM

I think you have two problems here. First, JDeveloper 10.1.3.1 doesn't support SQL Server stored procedures. There is a command-line utility that you can use to generate the required BPEL artifacts (WSDL and XSD). Second, you're using a 10.1.3.1 design-time with a 10.1.3.3 runtime. These are not compatible so you will likely run into namespace issues when you try to run your BPEL processes. You should upgrade your JDeveloper to 10.1.3.3. JDeveloper will support third-party databases in 11.1.1 including SQL Server 2005 (but not 2000), IBM DB2 v8.x and v9.x, DB2 AS/400, and MySQL. JDeveloper will support MySQL v5.2.6 and above because the INFORMATION_SCHEMA.PARAMETERS table was added at that time. The PARAMETERS table does not exist in MySQL versions prior to v5.2.6 so you will have to use the command-line utility.

Upgradation procedure from MI to Netweaver Mobile 7.1

Similar Messages

Maybe you are looking for