Upgrade error in program
Hi Everyone,
I am working on upgrade from 4.6c to ECC6.0.
During syntax checking i find one error in program.
The statements ENHANCEMENT-SECTION and ENHANCEMENT-POINT (without the STATIC addition) can only be used in executable coding.
How can i resolve this error.
Regards
Jai
I am closing this thread
Similar Messages
-
Syntax error in program "CL_HTTP_SERVER=CP " after EHP4 Upgrade
Hi All,
Iam getting ABAP dumps after upgrading my system to EHP4 Windows ABAP+JAVA stack,
Syntax error in program "CL_HTTP_SERVER================CP ".
Error in the ABAP Application Program
The current ABAP program "SAPLHTTP_RUNTIME" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_HTTP_SERVER================CP " in include
"CL_HTTP_SERVER================CM00F " in
line 15:
"Field "C_IS_SHOW_SERVER_HEADER" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLHTTP_RUNTIME" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_HTTP_SERVER================CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
CL_HTTP_SERVER================CP :
"Field "C_IS_SHOW_SERVER_HEADER" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. ."
Regards
UdayHi,
SPDD should be performed before ACT_UPG phase when system prompts you for SPDD. But now you cannot do SPDD phase. All the objects that came during SPDD phase has been resetted to new objects which SAP has delivered with EHP4.
SPAU you can perform after upgrade and that too with in 14 days when upgrade finished without object key.
I should suggest you to read upgrade guide on http://service.sap.com/erp-ehp.
Thanks
Sunny -
DOwnload finished but got X RedCircle Runtime Error!
PROGRAM: C:\Program Files(x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly. Need Support Team to give Resolution to me and others?
I have downloaded M/S approved software to correct runtime errors but cannot get iTunes to run again to upgrade ITunes
and Backup and Sync Iphone, Ipad, IPod Touch. Pleaase can you advise what to do next.
I am concerned about my Library of music as unable to access or protect music as downloads are not CDs to redo if "My Music\I Tunes is lost or corrupted?
Help is appreciated Thanx.Hi Aspden37,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
Hi Gurus,
Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
In the log i am getting following error message:
"System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Message no. BRAIN299".
Please help urgent.
FYI.....
we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
Points will surely be awarded.
Thanks,
AnuragHello Anurag,
Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
Regards,
Neha -
Syntax error in program "SAPLOCS_LOG ". for SPAM
Hi Team ,
I have updated SPAM from 730 45 to 730 51 after that i am trying to update SPS from spam , it is throwing the below error .
Category
ABAP Programming Error
Runtime Errors
SYNTAX_ERROR
ABAP Program
SAPLOCS_LOG
Application Component BC-UPG-OCS
Date and Time
07.04.2014 18:21:55
Short text
Syntax error in program "SAPLOCS_LOG ".
What happened?
Error in the ABAP application program.
The current ABAP program "SAPLOCS_UI" had to be interrupted because it contains
a statement that cannot be executed.
In the include "LOCS_LOGU15 " in the line 97 of program "SAPLOCS_LOG " the
following syntax
errors occur:
"The data object "LS_PATHISTQ" does not have a component called "PRE_VR"
"S"."
Author and last person to change the include are:
Author "SAP "
Last changer "SAP "
Error analysis
The following syntax error was found in the program SAPLOCS_LOG :
"The data object "LS_PATHISTQ" does not have a component called "PRE_VR"
"S"."
Help is much appreciated .
Thanks,
Pradeep.Hi ,
After full restart of the system also there is no use , even i tried to upgrade to 52 .
It is throwing dump .
Category
ABAP Programming Error
Runtime Errors
SYNTAX_ERROR
ABAP Program
SAPLOCS_LOG
Application Component BC-UPG-OCS
Date and Time
07.04.2014 23:32:43
Short text
Syntax error in program "SAPLOCS_LOG ".
What happened?
Error in the ABAP application program.
The current ABAP program "SAPLOCS_UI" had to be interrupted because it contains
a statement that cannot be executed.
In the include "LOCS_LOGU15 " in the line 97 of program "SAPLOCS_LOG " the
following syntax
errors occur:
"The data object "LS_PATHISTQ" does not have a component called "PRE_VR"
"S"."
Author and last person to change the include are:
Author "SAP "
Last changer "SAP "
Help is really much appreciated ..
Thanks,
Pradeep. -
Have error message ....Runtime Error! program: C:\Program Files (X86)\itunes\iunes.exe R6034
Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2 -
ERROR in program SAPLV14A (ECC 6.0)
Hello experts,
We just upgraded to ECC 6.0
and the functional team is not able to create any sales order because of an error in program SAPLV14A
Here is the short text:
Short text
Syntax error in program "SAPLV14A ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV69A" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLV14A " in include "LV14AU48
" in
line 114:
""NO-" expected, not "NO_"."
The include has been created and last changed by:
Created by: "46CUPGSPAU "
Last changed by: "PATEL "
Error in the ABAP Application Program
The current ABAP program "SAPLV69A" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The code is like this
IF NO_ERROR_IF_NEW_REBATE IS INITIAL.
Check auf KSPAE
IF CREATE_CREDIT_NOTE = YES OR
SAVE_CREDIT_NOTE = YES OR
DO_PRE_SETTLEMENT_CHECKS = YES.
Neues Verfahren ?
IF I_NEW_REBATE_PROCESSING = YES.
LOOP AT CONDITION
WHERE KSPAE = YES.
MESSAGE E780 WITH BONUS_AGREEMENT-KNUMA RAISING ERROR_MESSAGE.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
Can anybody please tell me what is wrong?Hello everyone,
I just found out that we had a wrong version of the FM (beta 1 apparently).
So we are trying to get the correct one.
What is the version beta 1? -
Hello Friends,
After upgradation Solman 7.01 to 7.1, During EWA Alert management configuration in step 3 --> Check Software component level phase, we receiving below error.
Also Syntax error in program "/SSF/SLIB " Dump is occurring inST22. Please find the Abap dump details attachment.
Please help me to resolve this issue.
Regards,
Farkath C/SSF/SLIB comes from SP A/PI, if there were issues in old version then they should have been reported.
Upgrading may be a solution.
However, there references of ADD_CCDB_ABAP_EXTRACTOR
Execute RFC |
|>>>>>| CASE LS_OPT-RFC_CALLTYPE. |
| 1640| WHEN 'SYNC'. |
| 1641| CALL FUNCTION '/SSF/CALL_SUBROUTINE_RFC' |
| 1642| DESTINATION LS_OPT-DESTINATION
That's why I am asking for the latest dump after the run of RTCCTOOL.
Regards -
Syntax error in program "SAPDBZMPQ_PGQ "
Hi All,
while executing tcode zppwagri its going to dump.I have gone through SDN but there is no solution.As this is related to standard Include issue.Can anyone provide me the SAPNOTE or solution for the issue.
We are upgrade our system from 4.7 to ECC6 EHP5 the structure qavo_tab not available in old version
but its there in newer system.how to remove above structure or avoid the syntax error as well as dump.
Dump details:
Short text:
Syntax error in program "SAPDBZMPQ_PGQ ".
What happened?
Error in the ABAP Application Program
The current ABAP program "ZMPQ_RQEEAL10" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPDBZMPQ_PGQ " in include
"DBPGQF001 " in line 256:
"Field "QAVO_TAB" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement."
The include has been created and last changed by
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program.
The current ABAP program "ZMPQ_RQEEAL10" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis:
The following syntax error was found in the program SAPDBZMPQ_PGQ :
"Field "QAVO_TAB" is unknown. It is neither in one of the specified tab"
"les nor defined by a "DATA" statement."
In standard Include program DBPGQTOP i have structure.
Tabelle der Vorgangsverwendungsentscheide
DATA: BEGIN OF qavo_tab OCCURS 5.
INCLUDE STRUCTURE qavo.
DATA: END OF qavo_tab.
Thanks
SiriLooks like the top include DBPGQTOP is not linked with the main program anymore after upgrade. In fact, we faced a similar 'missing include/syntax error' issue after our EHP5 upgrade. But that was on a function module/function group. We corrected it by running SE37->Utilities->Repair function group.
In the same way, try running 'Rebuild object list' from SE80 for your program.
Regards,
Gokul -
2007 Upgrade Error Company DB not consistent
Hi there,
I am currently using SAP b1 2005 server and client
im using Sql server 2005 for for database
while upgrading the system from 2005 to 2007
every thing(b1 server, client,company database) upgraded succesfully
but while loging into company it is showing error
"The company DB is not consistent, Check the SAP Business One log file for more information [Message 131-219]"
Thank you for your intrest in reading,
if you encountered similar problem or you know the solution please tell the solution
also plz tel where can i find solution for this kind of technical issues...
Thanks & Regards
Radhakrishnan
in the log file the error is like the following
Failed to read threshold from file - ReadThresholdFromFile C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=2828 TID=2180
30/04/2008 20:27:25:452211 Upgrade Note Threashold for IRU is 0.050000 C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=2828 TID=2180
30/04/2008 20:28:16:635453 Upgrade Error FromVersion=680318 ToVersion=860029 UPG_DoObjectUpgradeInt 2, error in object index=276, object name=Japanese Local Era, object ID=275
STACK:
Frame id=00: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02DF9710
Frame id=01: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02BCC676
Frame id=02: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02BCB392
Frame id=03: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02BCB30D
Frame id=04: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02BC9344
Frame id=05: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x0257D254
Frame id=06: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02C3EEB1
Frame id=07: "C:\WINDOWS\system32\kernel32.dll"; base=0x7C800000, offset=0x7C80B50B
C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=2828 TID=2180
30/04/2008 20:25:09:463527 Upgrade NoteLogAlways FromVersion=680318 ToVersion=860029 Ending the company upgrade C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=2828 TID=2904Radhakrishnan,
I ran into a similar problem recently while attempting an upgrade. I didn't find a solution to my specific problem but, I was wondering if you had run the pre-upgrade query. There is a SAP note
1000846 that refers to upgrade issues and the pre-upgrade query I would run this if you haven't already and see if it returns any results.
Also: here is a link to the query directly
[http://service.sap.com/~sapidb/012006153200000918392007E/UpgradeCheckScript_25_2004A_V.txt]
hope this helps,
Lucas -
Hi All, After upgrading system to EHP 4 , dispatcher gets automatically turned off after few minutes and getting error as follows."Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP". Please find the logs file as attachment. Thanks, Sam
Dear Sam,
The problem is with your database DB2.
It has not been properly restore.
Checked the below error from dev_w0
C Supported features:
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C Running with CLI driver
C
C Wed May 21 13:12:25 2014
C *** ERROR in DB6Connect[dbdb6.c, 1700] CON = 0 (BEGIN)
C &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1116N A connection to or activation of database "EC6" cannot b
C &+ e made because of BACKUP PENDING. SQLSTATE=57019
C &+
C &+
C *** ERROR in DB6Connect[dbdb6.c, 1700] (END)
C *** ERROR => DbSlConnect to 'EC6' as 'sapec6' failed
[dbdb6.c 1705]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
With Regards
Ashutosh Chaturvedi -
An internal error has occurred! + Runtime error! Program C-
I have Vista 64 SP2 all patches and Acrobat CS4 installed.Reader 9.4 was running without more then the normal troble with Adobe software. After installing Adobe Reade X it won't even start.
The only thing Reader X is doing is showing: An internal error has occurred!
And: Runtime error! Program C… The program has requested the Runtime to terminate in an unusual way. Please contact the application’s support team for more information.
I have enough of Adobes Beta Software released to me as a customer. Never seen anything worse then your products. Flash as THE security hole closely followed by Adobe reader. Okay that hole is closed now an forever as I never will install anything from Adobe on my PC again. The **** with downloading by Adobe DLM in firefox and such crap not to mention.
Welcome Foxit Reader!Hi,
this Error can occur if you make use of JUNCTION in your filesystem. Sometimes those JUNCTIONS are made by your Operating System (e.g. windows anytime-upgrade and than changeing system language). But perhaps you manually changed program and data storage locations by using JUNCTION ( e.g. mklink or any other tool ).
ONE SOLUTION which works for me was to install Adobe Reader manually by downloading the appropriate version at ftp://ftp.adobe.com/pub/adobe/reader/win . The startup with the desktop shortcut will not work.
1. You should create a new Folder (e.g. TEST ) in the HOMEDRIVE ( normally C: ) root location which is not a JUNCTION .
2. Open a command line ( press WinodwsKey+R than type "%COMSPEC%" without quotes and press OK Button)
3. Use now the set command to change environment varibles temporarily Change APPDATA and USERPROFILE by typing
SET APPDATA=C:\TEST
SET USERPROFILE=C:\TEST
4. Now start Adobe Reader from this command line by typing
"C:\Program Files\Adobe\Reader 10.0\Reader\AcroRd32.exe"
Adobe Reader will open.
5. You should go straight to Menu: Edit->Preferences->General
Disable or deselect the "Enable Protected Mode at startup" at the bottom. Click OK. and exit Adobe Reader.
6. Adobe settings are now written to C:\TEST
copy all from C:\TEST to your original USERPROFILE dir
Now you can use the desktop shortcut of Adobe Reader and it will also open pdf directly in your browser. -
SGD 4.31 upgrade error .. now what
Here's after installing Linux machine - everything looked good - prepped the production server for upgrade this evening/now am - dismantle ..pkgadd - going through the steps ..... I'm doing some investigating ...
These dir's/fiels didn't get installed for some reason:
/opt/tarantella/var/serverconfig/local/
/opt/tarantella/etc/pkg/tta/install/ttab64conv
is this a bug? - using V40Z Sol10/U3 x86-pkg
++++++++++
/opt/tarantella/bin/java/com/sco/tta/common/soap/SOAPResources_en.properties <linked pathname>
ERROR: attribute verification of </opt/tarantella/etc/pkg/tta/install/ttab64conv> failed
pathname does not exist
## Executing postinstall script.
To complete the installation, please run /opt/tarantella/bin/tarantella start
Installation of <tta> partially failed.
You have new mail in /var/mail//root
-bash-3.00# tarantella start
Secure Global Desktop Software License Agreement
To use Secure Global Desktop you must agree to be bound by
the terms of the Software License Agreement.
Y - I have read, and accept the terms of the license agreement
N - I do not accept the terms of the license agreement
R - Let me read the license agreement
Accept terms of Software License Agreement? [R] y
Setting up Sun Secure Global Desktop Software
Secure Global Desktop Setup recommends you use the following settings:
Installation type = upgrade 4.31.905 -> 4.40.907
Peer DNS name = ussccgsesgd02.gse.hds.com
Archive logs every week? = yes (Sunday 03:00 hours)
Are these settings OK?
Y - Yes, install using these settings
N - No, tell me more about the options and let me change the settings
Q - Quit now
OK to use these settings? [Y] y
ERROR: attribute verification of </opt/tarantella/etc/pkg/ttacompat> failed
pathname does not exist
Running wcp/configchanges Setup script...OK
Running tsp/resources Setup script.../opt/tarantella/bin/scripts/run_tclscript: -classpath: not found
OK
Running 3270/resources Setup script...OK
Running 3270/configchanges Setup script...Can't open /opt/tarantella/var/serverconfig/local/xpe.properties
cp: cannot create /opt/tarantella/var/serverconfig/local/xpe.properties: No such file or directory
Can't open /opt/tarantella/var/serverconfig/local/xpe.properties
cp: cannot create /opt/tarantella/var/serverconfig/local/xpe.properties: No such file or directory
1
Running 5250/resources Setup script...OK
Running 5250/configchanges Setup script...Can't open /opt/tarantella/var/serverconfig/local/xpe.properties
cp: cannot create /opt/tarantella/var/serverconfig/local/xpe.properties: No such file or directory
Can't open /opt/tarantella/var/serverconfig/local/xpe.properties
cp: cannot create /opt/tarantella/var/serverconfig/local/xpe.properties: No such file or directory
1
Can't open /opt/tarantella/var/serverconfig/local/tuning.properties
Can't open /opt/tarantella/var/serverconfig/global/cdm.properties
Can't open /opt/tarantella/var/serverconfig/local/tuning.properties
find: stat() error /opt/tarantella/var/ens: No such file or directory
/opt/tarantella/bin/scripts/jserverstart: /opt/tarantella/var/serverconfig/local/tuning.properties.tmp.1: cannot create
/opt/tarantella/bin/scripts/jserverstart: /opt/tarantella/var/serverconfig/local/tuning.properties.tmp: cannot create
/opt/tarantella/var/serverconfig/local/tuning.properties.tmp.1: No such file or directory
mv: cannot access /opt/tarantella/var/serverconfig/local/tuning.properties.tmp
/opt/tarantella/bin/scripts/jserverstart: /opt/tarantella/var/serverconfig/global/webauth.properties: cannot open
/opt/tarantella/bin/scripts/jserverstart: -classpath: not found
2007/12/13 02:57:13.540 proxy/server #1
Sun Secure Global Desktop Software (4.4) FATAL ERROR:
The program has encountered an error that means it cannot continue.
It will now exit. A technical description is given below to help
establish the cause.
The JServer failed to restart.
The Secure Global Desktop server cannot continue to run.
Fix the problem which caused the JServer to fail to start.
-bash-3.00# pkgadd -a /tmp/pkgadmin -d tta-4.40-907.sol-x86.pkg
The following packages are available:
1 tta Sun Secure Global Desktop Software for Intel Solaris 10+
(x86) 4.40.907
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: q
-bash-3.00# tarantella start
Starting Secure Global Desktop server (version 4.40.907). Please wait...
Can't open /opt/tarantella/var/serverconfig/local/tuning.properties
Can't open /opt/tarantella/var/serverconfig/global/cdm.properties
Can't open /opt/tarantella/var/serverconfig/local/tuning.properties
find: stat() error /opt/tarantella/var/ens: No such file or directory
/opt/tarantella/bin/scripts/jserverstart: /opt/tarantella/var/serverconfig/local/tuning.properties.tmp.1: cannot create
/opt/tarantella/bin/scripts/jserverstart: /opt/tarantella/var/serverconfig/local/tuning.properties.tmp: cannot create
/opt/tarantella/var/serverconfig/local/tuning.properties.tmp.1: No such file or directory
mv: cannot access /opt/tarantella/var/serverconfig/local/tuning.properties.tmp
/opt/tarantella/bin/scripts/jserverstart: /opt/tarantella/var/serverconfig/global/webauth.properties: cannot open
/opt/tarantella/bin/scripts/jserverstart: -classpath: not found
^C-bash-3.00# 2007/12/13 03:13:46.660 proxy/server #1
Sun Secure Global Desktop Software (4.4) FATAL ERROR:
The program has encountered an error that means it cannot continue.
It will now exit. A technical description is given below to help
establish the cause.
The JServer failed to restart.
The Secure Global Desktop server cannot continue to run.
Fix the problem which caused the JServer to fail to start.Hi,
Could you please help me?
Installed SGD on Linus and it does not start
Error is:
Java.io.Exception Failed to load all beans: javax.naming.NameNorFoundException: asad.properties....
at com.sco.tta.server.JServer.<init> (Jserver.java.306) -
Runtime Error! Program: C:...
Hi all,
I just finished installing Robohelp 7 onto my Vista box for the first time. After entering the license and proceeding it error'd out. I'm able to go into Robohelp HTML and RoboSource Control 3 Explorer, but when I try to open Robohelp for Word I get the following error popup. Anyone seen this before and can help me troubleshoot?
OS=Vista fully patched.
Word=Office 2007 Pro fully patched.
The popup is:
Titled Microsoft Visual C + + Runtime Library
Red X Runtime Error!
Program: C:...
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
OK button.
Thanks.We tech writers at this company are experiencing a similar problem. We're testing a PC with Windows 7 on it. We've asked our computer support person to install RoboHelp 8 (including RoboHelp for Word), so that we can verify that both RoboHelp HTML and RoboHelp for Word work correctly before we allow our PCs to upgraded from Windows XP to Windows 7. When we try to open RoboHelp for Word on this Windows 7 PC, a "Microsoft Visual C + + Runtime Library" error appears; here is part of it:
"This application has requested the Runtime to terminate it in an unusual way."
Thanks for any insights or tips! -
Syntax Error in program "/BDL/SAPLBDL11"
Hi,
I have installed ST-PI and ST-A/PI Add-ons with latest Support Patches in our BI7.01 environment. after that i have configured SDCCN successfully in Development environment but when i am trying to configure SDCCN in Quality environment, i am getting Syntax_Error for program /BDL/SAPLBDL11. Due to this error i am not able to create SDCC_OSS RFC also not able to activate batch jobs /BDL/TASK_PROCESSOR.
Following is the brief detail of error.
===================================================================================
SYNTAX_ERROR
Short text
Syntax error in program "/1BCDWBEN/SAPL/BDL/EN0000 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "/BDL/SAPLBDL11" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1BCDWBEN/SAPL/BDL/EN0000 " in
include "/1BCDWBEN/L/BDL/EN0000U01 " in
line 41:
"Field "ALL_" is unknown. It is neither in one of the specified tables "
"nor defined by a "DATA" statement. "DATA" statement."
The include has been created and last changed by:
Created by: "DDIC "
Last changed by: "DDIC "
Error in the ABAP Application Program
The current ABAP program "/BDL/SAPLBDL11" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
========================================================================================
Thanking you
Regards
PranavDear Pranav
I think you have done the upgradation to EHP3 , In order to Fix this issue would you please try to activated the lock object /ISDFPS/EALESYS , ENQUEUE_/ISDFPS/EALESYS and DEQUEUE_/ISDFPS/EALESYS in transaction SE11
I am sure this will fix that issue.
Best Regards
Jai Wardhan
Maybe you are looking for
-
Synchronize with local development environment
Hello, I'm not familiar with ABAP development and therefore I'm not well schooled in utilizing SAP/Netweaver development environment/infrastructure. I want edit in my local editor/development environment html/css files, which I had generated with the
-
I want to realize the function that client applet can invoke the method of Server applet through SIO First, I define and implant a shareable interface on the Server applet and that have passed the compiling. Code: (server applet) package temp1; Publi
-
I have not had much success with taking photos in Photo Booth with the new backgrounds without having portions of the person in the photo missing in the photo. Is there a way this should be done? I get out of the frame of the photo when it asks me to
-
My laptop says fan is not working but seems to be working fine!!
Hi, My laptop (HP, pavalion dv6) gives me the 90B error which says that the system has detected a cooling fan is not operating correctly. It says that If I press enter I can continue into the windows but it may cause damage to my laptop. otherwise
-
I am trying to install rlwrap so I can use command history in sqlplus and rman command prompts. Database is 10.2.0.4 and OS is CentOS 5. I download the zip file from here: http://utopia.knoware.nl/~hlub/uck/rlwrap/ ...and take the following installat