Upgrade OS 9.2 to newer??

hello,
would like to know if i can upgrade this http://www.apple-history.com/ to a newer OS as I cannot find a printer compatible with OS 9.2

Welcome to Apple Discussions!
Apple-History uses the website feature known as frames. You have to control-click inside the frame and open frame in new window to get the actual web address of the page in question.
Message was edited by: a brody

Similar Messages

After upgrading to IOS 5 on my iPad only some books in iBooks show content. They were fine before the upgrade. I made a new version in Pages and reinstalled them on the iPad. Still nothing. What is the fix?

After upgrading to IOS 5 on my iPad only some books in iBooks show content. They were fine before the upgrade. I made a new version of the book in Pages and reinstalled them on the iPad. Still nothing. What is the fix?

I just got the iBooks update and that fixed the problem, except the book covers look like they were done in a government printing office.

I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

I see. Apple's documentation on what is included in the iCloud backup doesn't explicitly say that it contains voicemails, but that doesn't mean it does not. You would just have to try restoring the backup to find out.
To restore to your iCoud backup you have to start by erasing the phone. Go to Settings>General>Reset and tap Erase All Content and Settings. Then go through the setup screens on the phone and when given the option, choose Restore from iCloud backup. You will then sign into your iCloud account, accept the terms and conditions, then choose the backup you wish to restore from. To see an older backup, you may need to tap "Show older backups" (see image below). Be sure your phone is connected to wifi and your charger as this may take some time to finish.
If this does not recover your voicemails, you can check to see if you have an older iTunes backup that may contain them. Available backups are shown in iTunes Preferences>Devices on the Backups list.
If all else fails, you could try contacting your carrier. Voicemail is a carrier feature and they may have an archive you could access.

Can't load App Store on my macBook Pro. Error is; You cannont open the application "App Store" because it is not supported on this system. How can I upgrade App Store or download new version?

Can't load App Store on my macBook Pro. Error is; You cannont open the application "App Store" because it is not supported on this system. How can I upgrade App Store or download new version?

Problem now resolved as I upgraded to Snow Leopard 10.6. Seems App Store doesn't like anything previous to 10.6.

I have adobe photoshop elements older version and it's for windows XP, now I need windows 7, do I upgrade? or buy a new one?. where do I find the cheapest Adobe Photoshop elements 13?

I have adobe photoshop elements older version and it's for windows XP, now I need windows 7, do I upgrade? or buy a new one?. where do I find the cheapest Adobe Photoshop elements 13?

Which version do you have?

I have a copy of Final Cut Express 2. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?

I have a old copy of Final Cut Express 2 that I never installed. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?
The Apple Store does not show does not contain purchase information of the old unused Final Cut Express. What can I do to register Final Cut Express 2 will not operate in the current OS systems on my iMac. It only is compatible with the G3 or G5.

If you have a record/documentation of your FCS full version purchase, you can contact Apple here:
https://ssl.apple.com/support/proapps/serialnumbers/
to obtain your serial number.
MtD
Message was edited by: Meg The Dog to fix typo

I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered

I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?

I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.

I own Logic Pro 7( I used to have a PowerPC and need to upgrade to Logic Pro 9 (new Intel chip, system 10.8) . Do I need to buy a whole new set or do I upgrade for less cost?

I own Logic Pro 7( I used to have a PowerPC and need to upgrade to Logic Pro 9 (new Intel chip, system 10.8) . Do I need to buy a whole new set or do I upgrade for less cost?

The cost of the Full Logic Pro 9 from the App Store is less than the cost of the discontinued Boxed Upgrade set for Logic Studio (if you could find one) ... so you might as well purchase the full Logic Pro 9 from the App store and be done.

Best approach to upgrade MaxDB AND move to new OS release

What would be the best approach to upgrade Contentserver MaxDB 7.5 on W2K server (32-Bit) to MaxDB 7.7 on Windows 2008 Server x64 (R2?)?
1. a) Upgrade MaxDB on the existing installation
     b) Create a complete backup
     c) Install latest release on new machine
     b) recover with backup from existing installation on new machine
2. a) Create a complete backup from existing installation
    b) Install same release on new machine
    c) recover with backup from existing installation on new machine
    d) upgrade to latest release on new machine
Both approaches share the problem that you have to run a OS/DB release constellation that is not released according to SAP PAM. The second approach has the advantage that the source system will not be touched and is still available in the original status if something fails. But the main issue is the compatibility question (7.5 not released for W2008, 7.7 not released for W2K)
Any suggestions?
Thanks,
Matthias

Natalia,
thanks for your answer.
> Do you have Content Server 6.40 ?
yes.
> the MAXDB version 7.5 is not released on W2008
neither is 7.7 on W2K.
> I recommend to go with 1 option.
Which would be this one:
>>1. a)Upgrade MaxDB on the existing installation
So can I upgrade to 7.7 on W2K though it is not released for this combination?
Best Regards,
Matthias

ERP Upgrade: Changes in Reporting in new version ECC6.0

Hi Gurus,
We are just in upgrade process from 4.7c to ECC 6.0. During the test we ascertained that there are certain changes happened in the reporting functions und the reports are not showing some necessary fields in new version. For instance the reports RFDOPO00 and RFKOPO00 are replaced by RFDEPL00 and RFKEPL00 in ECC 6.0, which do not show some important fields of old report. SAP says they are standard reports in ECC 5.0 /6.0.
How can we maintain old reports (in general, not specifically these above mentioned reports) from 4.7c in our new upgraded system ahead instead of new reporting standard of ECC6.0.
Please tell me the steps to solve this problem.
Regards
SIM

No, there is slightly difference in reporting between both versions ERP 4.7C and ECC 6.0. For instance in old version 4.7c we can produce reports (RFDOPO00 and RFKOPO00) with Subtotal and Total by currency by making check mark on both these items. In new version this items has been removed. There are also some more items which are not offered by SAP in new version.
As we have decided to keep some old reports in new system, Can you therefore please tell me how we can keep the old reports in new version?

Since upgrade, Facebook redirects into a new browser window

I noticed for the past couple of days that when I'd be in facebook and click on a game it would open a new tab. But since upgrading it opens a whole new browser window.
Tonight I was playing Monopoly and it kept saying that my internet connection was lost (which this may be a problem with the game itself) but I didn't know if it was because I had several browser windows open all for FACEBOOK!

Hello,
You can either use
<embed src="file.pdf" />
or, alternatively, my new plugin, PIFF: https://github.com/terrasoftlabs/piff
Peace,
Gabriel Nahmias
Terrasoft

IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

Had to upgrade according to screen. iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
I have restarted the computer. Brand new iMac intel. v 10.9.4

You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

I have a macbook pro and using photoshop elements 12. I dont have a problem before but since i upgraded my mac to an new version IOS Yosemite, then begun the problem. It always sotock or freeze.

I have a macbook pro and using photoshop elements 12. I dont have a problem before but since i upgraded my mac to an new version IOS Yosemite, then begun the problem. It always sotock or freeze. What should i do?

properly uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I have upgrade my iMac to the new OS X Maverick but now my computer is extremely slow and takes longer to open up everything. Has any one else had this issue?

Ihave just upgrade my imac to the new os x maverick and now its very slow to open everything.
Have any one else had these issues

MacKeeper is utter garbage!!!!
Before even attempting an OS X upgrade, completely remove this serious "crapware" from your system!!!!!
If you do not believe me, do a search in these support forums for MacKeeper and you can see for yourself!
Get rid of it!
See if your system speeds up after completely ridding your system of everything connected to MacKeeper.
Please, start a new thread and do not hijack a thread of another user posting!
Why are you so concerned about "cleaning out" your Mac?
How full is your Mac's hard drive?
How much RAM is installed in your Mac?
Download and install and run Etrecheck.
Copy and paste its information iinto a new posting so that we can see all the necessary details of your Mac system so we may begin to address your Mac issues.
http://www.etresoft.com/etrecheck
Good Luck!

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx

Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!

If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434

HT1338 Having difficulty printing with my HP Photosmart 7510 C311a after Maverick upgrade. Tried to install new HP drivers, but thwarted by demand for address under IPVA.

Having difficulty printing with my HP Photosmart 7510 C311a after Maverick upgrade. Tried to install new HP drivers, but unsuccessful.

It did not work after all...
@CHH: This is wheere I downloaded the printer drivers:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=nl&lc=nl&dlc=nl&soft wareitem=mp-84878-2
Good luck and keep us all posted on how you're doing with this problem!
Message was edited by: willem69limbo

Upgrade OS 9.2 to newer??

Similar Messages

Maybe you are looking for