Upgrade Support Package for one Software Component

Dear Experts,
I am new with SAP Basis Administrator and I have new task to upgrade EA-HR software component from release 600 sp30 to release 602 sp9.
Actually, EA-HR component in Development system already in release 602 sp9 while quality and production in release 600 sp30. This is where the problem started, since there is one SAP Note we need to apply that depends on the release version. The consultant wants to do the changes in development and transport it to quality then production. Since the way to apply SAP Note is vary based on EA-HR release version, the consultant wants the release version of EA-HR in all systems to be the same.
I have download support package for EA-HR 602 sp9.
My question is very basis, how to upgrade EA-HR component to release 602 sp9?
Regards
Rian Wisandanu

EA-HR component in Development system already in release 602 sp9 while quality and production in release 600 sp30
This is a no go... This is why most people call for a development freeze while the system is been patched.
the consultant wants to do the changes in development and transport it to quality then production. Since the way to apply SAP Note is vary based on EA-HR release version, the consultant wants the release version of EA-HR in all systems to be the same
You system is not consistent, transporting data into a system with a different patch set can cause serious problems. You are going to have to tell your consultant that he'll have to wait until the whole landscape is patched to the same level.
Who upgraded the component in DEV??
The note also states that this corrections are available for 600 so there was no need for 602 if you are not planning a EHP upgrade..
EA-HRRXX 600 SAPK-60050INEAHRXX
Maybe you can give us some more info about what are you planning to do with your system patch wise?
Regards
Juan

Similar Messages

How to upgrade Support Package for NSP (Netweaver Sneak Preview) server?

hello guru,
I have installed Netweaver Sneak Preview on my notebook. This ABAP Application Server 7 's support package is 12. Can I upgrade it to the newest support package? Can I do it in the normal way, just like normal SAP server, use SPAM?
Thanks a lot.

Hi, is there any way, how to aply enhancement package 1 on abap trial 7.0? Thanks for reply

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Best Approach: All IDocs in one software component or not

Hi All
We are in the process of importing IDocs into PI system. We are maintaining software components based on legacy system.
We have two oprions to imports idocs into software components
1. Import all idocs into common software component (In this case i am thinking with respect to transports)
2. Import to respective legacy software component
Could you please suggest best approach?
Thanks
Sai

Thanks prateek.
Actually we have some idocs common across sofwtware components. Thats why we are planning go for common software component which can maintain all ECC objects.
If we maintain like this, is there any problem in test and production mainly during transports- dependency from one SWC to common SWC.
Thanks
Sai

Can I assign one software component to multiple products

Hi
Let me know Can I assign one software component to multiple products if so explain me in detail.

See this
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/35d022edd4d646a53a56a4da60f9db/content.htm
<i>4. To view details about a software component, choose the Software Components tab.
5.From the Software Component dropdown box, select the software component whose details you want to view.
A table with software component versions appears.
6.Select the software component version whose details you want to view. Choose one of the following tabs:
General
Displays general details about the software component version.
Products
<b>Displays the products, which contain the software component version</b>.</i>
At this location u can see multiple products for one SWC
Regards,
Prateek

My MacBook Air is in a support profile for one of my Apple IDs while all my other devices are in a support profile for a different one of my Apple IDs; how can I combine under one?

My MacBook Air is in a support profile for one of my Apple IDs while all my other devices are in a support profile for a different one of my Apple IDs; how can I combine under one?

Actually, this can be done without merging Apple IDs, as I found just by trying this out: I went into the support profile for the Apple ID that had only my Mac listed. I then chose to disassociate the Mac from that Apple ID. I signed out and signed in using my other Apple ID (the one with all my other Apple devices). I chose to add/register a new device, entered my Mac's serial number, and now it is associated with all my other Apple devices under a single Apple ID. No merger of Apple IDs required.

I can't find any support package for Solution Manager 4.0

I can't find any support package for solution manager at
Support Packages and Patches - > SAP Technology Components
SAP Technology Components
GATEWAY
JAVA LOG VIEWER
SAPCAR
SAP EXCHANGE CONNECTOR
SAP CR CONTENT
SAPROUTER
SAPSECULIB
SAPSSOEXT
I'm searching it at a wrong place?

You´re at the right place - but your user doesn´t seem to have permissions to download them.
You have a license for Solution Manager?
Markus

How to activate Monitoring for Others Software Component ?

Hi,
I have 1 non-sap server with MSSQL database, i want to monitoring this server as well in my SAP Solution Manager : Solution Monitoring.
I have created new server, database, system, product, logical system and assign it to the solution.
but when i am trying to set "Activate Monitoring for Ohters Software component" no CCMS_Context selected from the drop down menu ?
Please advise ?
Thank you and Best Regards
Fernand

Hi Sunil,
Thanks for your reply. I check the Note:408527 but what worries me is this section in the note
Note 3:
If the MONITORING attribute is used, BR986W warnings referring to fragmented indexes are no longer displayed. As a result, this means of
determining fragmented indexes is no longer available
so what about if that index get fragmented. ?

Upgrading Support Packages

How can I upgrade the support package of MDM 7.1?

It also depends which support pack you are upgrading with.
say
From MDM 7.1 SP06 and up, multiple instances of MDM are supported on the same MDM host machine.
Each instance must be installed separately and requires a different SID and different listening ports.
From MDM 7.1 SP07 and up, MDM can be installed with SSL. This is configured using one of the following
modes: Unencrypted, SSL or Both. The installation type is configurable in the MDM server ini files.
In the Projects preparation phase you must:
1. Adapt all custom applications that use ABAP API, Java API, or CLIX. These programs can be adapted in
advance.
2. Update and test import and syndication maps. This has to be done in the Dev/Test environment.
3. Delete all pre-7.1 ports and maps from the Productive environment. This must be done before any
schema imports are allowed in the 7.1 Productive environment
Please see below link for all your concerns (SMP Login Needed)
https://websmp201.sap-ag.de/~sapidb/011000358700001668502008E
hth
thx
Deep

Download of ABAP Support Packages for SAP Netweaver PI 7.1

Hello all,
I'm just working on upgrade SAP Netweaver PI 7.0 to PI 7.1 and we have no functional connection to SAP OSS and therefore I'm not able to aprove some Support Packages via Solution Manager.
PLEASE - Can somebody download the following Support Packages and copy it via ftp:
BW Support Package 06 for 7.10 - SAPKW71006
BW Support Package 05 for 7.10 - SAPKW71005
Basis Support Package 06 for 7.10 - SAPKB71006
Basis Support Package 05 for 7.10 - SAPKB71005
ABA Support Package 06 for 7.10 - SAPKA71006
ABA Support Package 05 for 7.10 - SAPKA71005
PI_BASIS 2006_1_710: patch 0006 - SAPKIPYN06
PI_BASIS 2006_1_710: patch 0005 - SAPKIPYN05
FTP data:
server: ftp.vse.sk
username: sap
password: Supp0rtpack
Thanks for your time and help.
Best regards,
Slavomir Kysel.

Solved by SAP Walldorf.

Business packages support packages for specific languages?

Hi all,
If i have one business package and i want to implement it in a language which is not mentioned in the languages list given in the documentation for that business package.
Are there in anyn support packages of business packages for specific languages?
If yes where i can get these information?
Regards
Rajendra

Hi
You can find the information regarding business packages and its support packages in Service market place.
Also you can find some documents in contentportfolio in sdn.
https://websmp201.sap-ag.de/swdc
https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
Regards
Yoga

Embedded BI - System Upgrade, Support Package application and so on

Since Netweaver '04, SAP R/3 and SAP BW/SEM were separated system.
Now, with Netweaver 2004s and the "embedded BI", they are unified on the same installation.
1)The upgrade operations for R/3 and BW are separated or in the same package?
So, support package installation is cumulative?
2)When R/3 is down for upgrade/support pack---> BW is Down?
When BW is down for upgrade/support pack---> R/3 is Down?
3) System crash is cumulative?
Points for every useful answer,
Thank you, Claudio

The whole scenario depends upon if you are using embedded BI or a stand alone BI.
1)The upgrade operations for R/3 and BW are separated or in the same package?
So, support package installation is cumulative?
In either case upgrade operations are separated
2)When R/3 is down for upgrade/support pack---> BW is Down?
When BW is down for upgrade/support pack---> R/3 is Down?
embedded BI - Yes as being on the same instance
stand alone No, upgrade is independent on a technical/application standpoint
3) System crash is cumulative?
embedded BI - Yes
stand alone NO

???? in Menu Bar after upgrading support packages

Hi All,
I have upgraded the support packages from Stack 16 to Stack 20 for my ECC 5.0
Every functionality is fine after the upgrade. But when our consultant tries to check the material in transaction MB52, in the next screen we see some ?????? in the menu items which is supposed to have some options in letters. The functionality is fine when we click on it knowing the option which is supposed to be there.
Assuming that it is the issue with the GUI, we have upgraded our GUI to 710 patch level 4 which is the latest available. Still no luck.
Can anyone help me with this. This is holding our upgrade on quality.
Points will be rewarded.
Thanks
Vijay

Hi All,
I resolved this myself. We just need to get to the screen shere the ???? show up and go to SYSTEM >> STATUS
Under SAP Data, double click on GUI Status > STANDARD
Select the Application Toolbar and click on Activate.
This should solve the issue.
Thanks
Vijay

Syntax check for a software component

Hi all,
is there a way to run a syntax check for all objects of a software component?
Means triggering the check at software component level.
Thanks and regards!
Kerstin

Hi Kerstin
I think basis guy should know this, it`s on software component level.
i know a tcode 'SGEN', but this is used to define a background job then compiling the software component. I`m not sure the background job log whether have this kind of error message if there are SYNTAX error.
regards,
Archer

How can I get Support Packages for SAP NSP 2004s?

Hi together,
I have installed the SAP NetWeaver 04s Sneak Preview.
How can I get the support package stacks (SP 6 and SP 7)?
I have only a small OSS-User for 'Freie Berater' (Free Consultants). With that OSS-User it is not possibel to download the the support package stacks SAP Support Portal.
Kind regards, Eva

Hi Daniel,
the sp-level is 5. You can find it via system/status/ in the section 'SAP System data' (klick at the detail-icon).
Web Dynpro for ABAP works with that version. But I would like to have the newest sp-level. Our Web Dynpro teacher gave us some example sources and said that some of them might need sp 6. But I didn't test it.
I have another question: Have you worked in the MARK project a few years ago? There was a collegue named Daniel Kotte.
Kind regards, Eva

Upgrade Support Package for one Software Component

Similar Messages

Maybe you are looking for