???? in Menu Bar after upgrading support packages

Hi All,
I have upgraded the support packages from Stack 16 to Stack 20 for my ECC 5.0
Every functionality is fine after the upgrade. But when our consultant tries to check the material in transaction MB52, in the next screen we see some ?????? in the menu items which is supposed to have some options in letters. The functionality is fine when we click on it knowing the option which is supposed to be there.
Assuming that it is the issue with the GUI, we have upgraded our GUI to 710 patch level 4 which is the latest available. Still no luck.
Can anyone help me with this. This is holding our upgrade on quality.
Points will be rewarded.
Thanks
Vijay

Hi All,
I resolved this myself. We just need to get to the screen shere the ???? show up and go to SYSTEM >> STATUS
Under SAP Data, double click on GUI Status > STANDARD
Select the Application Toolbar and click on Activate.
This should solve the issue.
Thanks
Vijay

Similar Messages

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

I get a black and white logo and a progress bar after upgrade ipad2 5.01

i get a black and white logo and a progress bar after upgrade ipad2 5.01

See this page : http://support.apple.com/kb/HT4097 - it covers :
iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.

Username not in menu bar after reset

My username used to display in the menu bar after I updated to Lion. However, the Apple techs recently had to completely reset my MacBook to fix a software problem. Ever since, the username hasn't shown up. Obviously this isn't a serious issue, I would just like to know why it disappeared and be able to put it on there again. I tried going to Users & Groups in System Preferences and looking for some option to "show username" like the answers to a similar question on this site suggested, but I couldn't find any box like that to check, this is all that shows up when I click Users & Groups. Anyone know how to change it?

I don't know what sytem you're on but it's more or less the same on the last few - tiger, leopard, lion etc. You just need to open your login options ans check the fast user switching name .... if I remember correctly.
Here's one of many web pages explain the process :
http://www.hongkiat.com/blog/how-to-put-your-name-on-macosx-menubar/

After applying support package up to sapkb64020 finance node in IMG disappe

We havwe an ECC5. It seems that (very probably as we noticed aftervards)after applying
support package up to sapkb64020 in IMG(SPRO) "finance" node(and nodes
beneath) disappeared. As this is very urgent I would kindly ask you for good answers

Hey,
The sulotion for this problem exists in note number 922552:
Note 922552 - SPRO: Financial Accounting Node not visible in Reference IMG
good luck

App stuck under Menu Bar after Unlock

Random application's Title bars are getting stuck under the Menu Bar at the top left of the screen after I unlock my Air. Attempts to drag the window to a different location results in them snapping back to the original position. The only fix is to close the application and restart.
Anyone else seeing this? Could this be an Accessibility option that's on that shouldn't be?

I ended up re installing Mavericks after the last update (10.9.1) from a bootble USB stick. The problem appears to have gone away, so maybe my original upgrade of Mavericks caused the problem???
I downloaded Mavericks again from the app store. When it had finished downloading (approx 5Gb) I exited the installer and created a bootable USB (needs to be 8GB minimum). Then booted from USB and ran the Mavericks installer. As I said problem seems to have disappeared......
I used this article http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html and used the method in Option 1 in the article to create the drive. A Synopsis of the steps are:
Format the USB using Disk Utility to Mac OS Extended with GUID partition.
Open Terminal and paste the following command press Return and enter admin password when prompted
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
It takes a while to create and copy the installer. (Could be up to 30 mins)
Finally reboot and hold down Option key while computer boots then select the USB drive.

Can't remove old contextual menu item after uninstall on package...

Had PhoneValet installed with PhoneValet Anywhere. Support ended prior to Lion. I have run the un-installer and everything seems to be gone except two entries in the contexutal menu. When I'm in Contacts and click on a phone number I get: "PhoneValet Anywhere:Dial" and "PhoneValet Anywhere:Dial Exactly".
If I select either choice I get prompted to porvide a location for the missing app.
These menu choices are NOT listed in the System Prefs->Keyboar->Services list.
I tried rebuilding the servers db and it did not remove the entries.
I'm assuming they are residual text strings in a file but I don't know where to look to remove them.
OSX ia 10.8.5. I have searched the support forums and tried various suggestions but no success.
Any help?

Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

The customer themes not working after installing support package.

Hi,
In a Web dynpro ABAP aplication that i made in a project, we have a customer theme. We transported the development of a new host that had a higher level of support package, and it has stopped working properly the customer theme. We´ve gone from 7.0 sp 9 to sp 20. Well, when you run the programa WD_THEMES, in the ALV appeared to me not the customer theme. So I exported the standar themes and with Eclipse, I´ve copied and re-created the customer theme by modifying the latter.
Once changed, I try exporting to the test environment and it is here that the level of support package was sp18. I could not import it because the version was not the same.In the development environment was 7.0.19.1 and in the test environment was 7.0.15.1.
The question that comes to me is when we have a customer theme in a environment and upgrade the level of support package, is the version of all themes listed in the program updated or only the standar themes?. If this is so, if we upgrade the level of support package we will have to re-export the standar themes, copy one of theme and go back to redo our theme, right?.
Thanks and hope your answer.

Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error          CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly

Unable to Login & Ececute any transaction after Applying Support Package

Dear all,
After applying SAP_BASIS Packs (SAPKB700..) support pack from level 15 to 18, the it got cancelled and when i try to execute any transaction i am receiving ABAP dump "syntax_error".
When i try to login i m getting the following msg. " Syntax error in program "SAPLSDOC ""..
SAME MESSAGE IS POSTED IN 2007 BUT NO ANSWER
Unable to login after applying patches
could you help me to resolve this problem?
Thanks and regards.
Subbu

Hi,
Is Support Package upgrade failed in IMPORT_PROPER step ? then plesae refer
support pack SAPKB70014 stuck at import _proper! Very urgent.
http://www.sapfans.com/forums/viewtopic.php?f=12&t=309661&p=954180
We also faced same issue in Solution manager and issue solved by running to r3i commad
tp r3i <SP_name> <SID> pf=<transport profile> -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
eg:
D:\usr\sap\trans\bin>tp R3I SAPKB70014 SID pf=TP_DOMAIN_SID.PFL
-Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
Note: Before executing above command please contact SAP (OSS message)
Thanks,
Preethish

How to upgrade Support Package for NSP (Netweaver Sneak Preview) server?

hello guru,
I have installed Netweaver Sneak Preview on my notebook. This ABAP Application Server 7 's support package is 12. Can I upgrade it to the newest support package? Can I do it in the normal way, just like normal SAP server, use SPAM?
Thanks a lot.

Hi, is there any way, how to aply enhancement package 1 on abap trial 7.0? Thanks for reply

RSM2052 error after import Support Package SAPKW70022 in MSSQL Data Load

Hi;
I imported Support Package SAPKW70022 but after import data load from MSSQL gives error RSM2052.
How can I solve my problem.
Best Regards.

Hi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK

InfoObjects Key disappeared after BW support packages applied

Hi.
We have a serious problem, after we applied BW support packages (7.0110) all our infoobjects that are created as text only, no master data, are only displaying the text. The objects key is empty. Do anybody have a solution for this?
Koos.

Hi.
We have found a work around for the problerm for know and here it is:
5.1.3 Optimizing detail object syntaxFor queries on BI universes that include only the key and medium name detail objects of adimension, it is possible to modify the generated syntax of the objects to improve queryperformance, due to some internal details of the OLAP BAPI interface.To modify the syntax:
1.Open the universe in Designer.
2.Double click the key detail object you want to modify.
3.In the Select text box on the "Definition" tab of the "Edit Properties" dialog box, changethe syntax to refer to the NAME attribute of the SAP characteristic.For example, for the objectL01 Customer Key , change the generated select syntax:[Z_CUSTOM].[LEVEL01].[[2Z_CUSTOM]].[Value] to refer to the NAME attribute:[Z_CUSTOM].[LEVEL01].[NAME]4.ClickOKto save the changes.5.Follow the same steps for the name object. Change the syntax to refer to theDESCRIPTION attribute of the SAP characteristic.

Upgrade Support Package for one Software Component

Dear Experts,
I am new with SAP Basis Administrator and I have new task to upgrade EA-HR software component from release 600 sp30 to release 602 sp9.
Actually, EA-HR component in Development system already in release 602 sp9 while quality and production in release 600 sp30. This is where the problem started, since there is one SAP Note we need to apply that depends on the release version. The consultant wants to do the changes in development and transport it to quality then production. Since the way to apply SAP Note is vary based on EA-HR release version, the consultant wants the release version of EA-HR in all systems to be the same.
I have download support package for EA-HR 602 sp9.
My question is very basis, how to upgrade EA-HR component to release 602 sp9?
Regards
Rian Wisandanu

EA-HR component in Development system already in release 602 sp9 while quality and production in release 600 sp30
This is a no go... This is why most people call for a development freeze while the system is been patched.
the consultant wants to do the changes in development and transport it to quality then production. Since the way to apply SAP Note is vary based on EA-HR release version, the consultant wants the release version of EA-HR in all systems to be the same
You system is not consistent, transporting data into a system with a different patch set can cause serious problems. You are going to have to tell your consultant that he'll have to wait until the whole landscape is patched to the same level.
Who upgraded the component in DEV??
The note also states that this corrections are available for 600 so there was no need for 602 if you are not planning a EHP upgrade..
EA-HRRXX 600 SAPK-60050INEAHRXX
Maybe you can give us some more info about what are you planning to do with your system patch wise?
Regards
Juan

"No valid source context supplied" in technical bar after upgrade to EhP1

Dears,
After upgrade from 7 to 7 EhP1 we have error displayed in technical bar (bar on the top, with Log off and Personalization buttons) in all business roles that we log in. There is BSP error displayed:
"No valid source context supplied"
Exception Class CX_XSLT_RUNTIME_ERROR
Error Name CX_XSLT_RUNTIME_ERROR
Program CL_BSP_WD_REPOSITORY==========CP
Include CL_BSP_WD_REPOSITORY==========CM003
ABAP Class CL_BSP_WD_REPOSITORY
Method CREATE_INSTANCE_FROM_XML
Line 10
Long text -
Do you have any ideas?
We have component webcuif in 701 version (SP 4).
Best Regards

thx Anup but still no success.
I am thinking whether we should do any repositories consitency check after upgrade? any manual adjustments? this is a standard component crmcmp_hdr.
the error seems to be caused by implementing note 0001358764 before upgrade in CRM 7.
Best Regards

MAM Not Working After Applying Support Package

We have been lived with MAM 2.5 with SP16 for almost a year now. We recently applied support package 19 for ABAP and J2EE stacks but MAM stopped working right after that. To fix the problem we had to do the following steps:
1. Disable all SyncBO
2. Regenate all SyncBO
3. Run Replicate Database
4. Enable all SyncBO
5. Delete MAM 2.5 client by WebConsole for all PDA (over 100 devices)
6. Re-Assign MAM 2.5 client back to PDA from WebConsole
My question is do we have to perform those steps above every time we are applying new support package? If it is a case, it's very time consuming because we have to manually perform step 5-6 for every users.
Does anyone have seen or experience this scenario before? Your comment is highly appreciated.
Regards,
Dai Ly

Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error          CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly

???? in Menu Bar after upgrading support packages

Similar Messages

Maybe you are looking for