Upgrade to CRM 2007: minumun service pack level for other components
Hi all,
I have to upgrade my CRM 5.0 to CRM 2007. CRM is connected to ECC 6.0 and SCM 5.0. What are the minimum SP level for those component? Is there any link to documentations about mandatory SP for not CRM components?
Thanks a lot.
Hello
In the CRM 2007 Master Guide which is available in the [SAP Service Marketplace|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000704565&] I found that SAP ERP 6.0 EHP 3 is recomended and SAP R/3 4.6C SP 53 is the minimum version. No special version is mentioned for SCM 5.0.
Best regards
Gregor
Similar Messages
-
Service Pack Level for IDM 7.2
Dear All,
I have installed a IdM 7.2 in a windows server. I am creating a document for our organization. I came across of a question on how will I able to know what SP Level does my IdM is. I tried searching and checking in the Identity Center > About Identity Center I was able to see System Info. But once I click the System Info button I am receiving an error "System Information is Unavailable at this time".
I also checked already in the usr files of the installation but wasnt able to see any logs in the files.
Does anyone know any other steps on how to check SP Level?
Thank you in advance.
Regards,
SantiHi Santi,
Assumption: SAP IDM 7.2 version
You can find the runtime version by checking the dispatcher node.
Designtime version can be found in Identity center node.
Kind regards,
Jai -
SAP ECC 6.0 service pack level upgrade from 15 to 18 impact on SAP SRM 5.0
Hi All,
What all needs to be tested in SAP SRM when we upgrade SAP ECC6.0 service pack level from 15 to a8.
I am already facing issue in BBPGET VD and HR Interface with SAP SRM.Workflow issue while testing in EBQ.
Kindly let me know is anythings needs to be tested.
Regards
Vivek.Hello,
There are no known issues related to ECC 6.0 support package upgrade when this system is integrated with SRM 5.0.
Since SRM 5.0 is fully supported with ECC 6.0.
Regards,
Ricardo -
Hi All,
I want to know the steps to upgrade to CRM 2007 from CRM 5.0.
If you atleast give me the links where I can find the info, that is also fine.
I need to prepare a document involving the steps and mandatory information to be noted while doing the upgrade.
Thanks in advance.
Regards,
SurendraHi Surendra,
If it helps, you can get the Upgrade Master Guide document at:
- http://service.sap.com/instguides
-> SAP Business Suite Applications
--> SAP CRM
---> SAP CRM 2007
> CRM Product
And there you have a link to Upgrade Master Guide SAP CRM 2007.
Kind regards. -
Hi,
Please share documents & urls where i can explore the steps & things to be explored for carrying out the Technical Upgradations to CRM 2007
RegardsHave a look at the installation guides at service.sap.com/crm-inst
cheers Carsten -
PI 7.0 Service pack level
In PI 7.0 system
SXMB_IFR > Integration repository > logon as PISUPER > from menu bar help > Information
If you do the above it shows a pop up screen
SAP Netweaver
Exchange infrastructure
System information
Application :Design : Integration builder
User : pisuper
Language : English
Server : hostname_sid_00
Server node: server 0
Runtime enviroinment
Java version 1.6.0_05
Java vendor Sun micro system
Version
Service pack 9
Release 645_VAL_REL
Latest change 378089
Sync time $(sync time)
Now I have to increase the Service pack from 9 to 12
What Should I do for this and how to do.Please tell me the procedure.I would be grateful for your helpPI7.0 contains both ABAP & JAVA stack.
You must upgrade patch level 9 to 12 for both stack.
Only JSPM upgrade is not enough. go through service.sap.com/sp-stacks and see patch level for each components for ABAP & JAVA stack.
1st upgrade ABAP patches then go for Java patches. -
Service pack level & PI basis level for MAM3.0
Hi All,
We are trying to configure our server with MI2.5 and MAM3.0. Can anybody please tell us what are the levels of the service pack and PI basis levels must be there to work with MAM3.0.
Below are the details of the current service pack level and PI BASIS levels of our server.
SAP_BASIS 640 0020 SAPKB64020 SAP Basis Component
SAP_ABA 640 0020 SAPKA64020 Cross-Application Component
ST-PI 2005_1_640 0003 SAPKITLQH3 SAP Solution Tools Plug-In
PI_BASIS 2005_1_640 0012 SAPKIPYJ6C Basis Plug-In (PI_BASIS) 2005_1_640
SAP_BW 350 0020 SAPKW35020 SAP_BW 350
PI 2004_1_500 0012 SAPKIPZI6C PI 2003_1_470 : Add-On Delta Upgrade
<i><b>Note: our Middleware and Backend both are in the same server.</b></i>
Your help in this regard is highly appreciated and rewarded too.
Regards,
MurthyHi Murthy,
MAM 3.0 backend minimum requirements are:
R/3 4.6C (minimum SP53) with SAP R/3 Plug-in 2004.1 (Minimum SP13)
R/3 4.7 (Minimum SP 27) with SAP R/3 Plug-in 2004.1 (Minimum SP13)
ERP 2004 (Minimum SP11) with SAP R/3 Plug-in 2004.1 (Minimum SP14)
ERP 2005 (Minimum SP6), no Plug-in required
Please be aware that you will need to apply quite a few notes even if you are on the latest SP level for any of this backends.
MAM 3.0 central note references backend central notes for various supported backend. You should take care that appropriate note is analysed and all notes are implemented.
Regards,
larissa Limarova -
I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Word or Excel document I get the “Not Responding” message. The “Word is saving……” bar at the bottom does not show any progress. On clicking the document I get a faded version even when in Safe Mode. Somehow the document appears on the Desktop where I tried to save it. On trying to open the saved document, even as administrator, I get the following ”File in Use” message:
“The ….docx is locked for editing by….” and I am asked three questions including:
“Do you want to open a Read Only copy” yet on clicking “Yes” I am able to edit the same document.
On trying to save to a different location I get the message:
“Your autocorrect file MSO 1033.ad could not be saved. The file may be read only or you may not have permission to modify this file.”
The same message stating FILE12\1033\MSO.ACL MSO 1033ad recurs with new Excel documents.
How can I correct this problem?
PS
Worse still, the HP Advisor icon that appears on startup does not load successfully while showing the message: “Access to the path Hewlett-Packard\HD Advisor is denied”.
What can I do about it?
ZDKI'm having the same issue, allowing guest access on the share did change the logs I'm getting in Samba. Earlier on it was giving errors on the inability of guest access to the share.
============================================================
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(37)
INTERNAL ERROR: Signal 11 in pid 4204 (3.0.10)
Please read the appendix Bugs of the Samba HOWTO collection
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(39)
============================================================
I also noticed that the temporary file that is created by office is not removed after the attempt to safe the file. (something like: ~$filename). -
Error message while while upgrading FIM RTM to FIM Service pack 1
Hi All,
I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
Regards,
Anirban SinghaHI Dominik,
Thanks for reply,
Event Error,
Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
MSI Logs:
CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:06:14: DetectServiceAccount. Return value 3.
MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
Action 15:06:14: SetupCompleteError.
Action start 15:06:14: SetupCompleteError.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
Action 15:06:14: SetupCompleteError. Dialog created
MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
Action ended 15:06:19: SetupCompleteError. Return value 2.
Action ended 15:06:19: INSTALL. Return value 3.
MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
Property(C): DiskPrompt = [1]
Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
Property(C): PID = 04783-270-0001260-04309
Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
Property(C): WWF35 = 3.5.30729.5420
Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
Property(C): SQLDB = FIMSynchronizationService
Property(C): EVENTSOURCE = FIMSynchronizationService
Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
Property(C): SQLServerStore = LocalMachine -
Suggested Support Pack Level for ECC 6.0 Upgrade - Target
Hi ,
Can someone give us the suggested support pack level for the ECC 6.0 system after the upgrade.
Our current patch level is:
SAP_ABA 700 0012 SAPKA70012
SAP_BASIS 700 0012 SAPKB70012
PI_BASIS 2005_1_700 0012 SAPKIPYJ7C
ST-PI 2005_1_700 0003 SAPKITLQI3
SAP_BW 700 0014 SAPKW70014
SAP_AP 700 0009 SAPKNA7009
SAP_APPL 600 0010 SAPKH60010
SAP_HR 600 0013 SAPKE60013
EA-IPPE 400 0008 SAPKGPID08
EA-APPL 600 0008 SAPKGPAD08
EA-DFPS 600 0008 SAPKGPDD08
EA-FINSERV 600 0008 SAPKGPFD08
EA-GLTRADE 600 0008 SAPKGPGD08
EA-HR 600 0013 SAPKGPHD13
EA-PS 600 0008 SAPKGPPD08
EA-RETAIL 600 0008 SAPKGPRD08
FINBASIS 600 0008 SAPK-60008INFINBASIS
ECC-DIMP 600 0008 SAPK-60008INECCDIMP
ERECRUIT 600 0008 SAPK-60008INERECRUIT
FI-CA 600 0008 SAPK-60008INFICA
FI-CAX 600 0008 SAPK-60008INFICAX
INSURANCE 600 0008 SAPK-60008ININSURANC
IS-CWM 600 0008 SAPK-60008INISCWM
IS-H 600 0008 SAPK-60008INISH
IS-M 600 0008 SAPK-60008INISM
SEM-BW 600 0008 SAPKGS6008
IS-OIL 600 0008 SAPK-60008INISOIL
IS-PS-CA 600 0008 SAPK-60008INISPSCA
IS-UT 600 0008 SAPK-60008INISUT
LSOFE 600 0008 SAPK-60008INLSOFE
IRMIPM 30B 0005 SAPK-30BI7INIRM
IRMGLB 30B 0005 SAPK-30BG7INIRM
ST-A/PI 01K_ECC600 0000 -
GSCDMC 600 0001 SAPK-60001INGSCDMC
RCMGT 601 0001 SAPK-60101INRCMGT
Thanks
SenthilHi Senthil,
of course it is always recommended to use the newest Support Package Stack,
but if your system (your business processes) are working fine, I would recommend you to
import support package only then when you have an error or you want to have a special fiunctionality.
Some customers play support packages into the system only twice a year, because the business processes
should be tested after the sp import.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA -
Latest service pack levels and maintenance updates
I have searched around sun.com and cannot find the place where you can find the current service pack level and current maintenance update for Application server. Does anyone know where to find this information?
Thanks in advance for your help!
JenniferHi
Check the latest versions of service packs and maintenance updates @ http://www.sun.com/download/index.jsp?cat=Application%20%26%20Integration%20Services&tab=3
Thanks
Srinivas -
Support Pack level for upgrade
Hi All,
We are upgrading from R/3 4.7 to ECC 6.0, can anybody provide me Support Pack level for SAP_ABA, SAP_BASIS etc. before starting upgrade.
I have gone through lot of OSS notes but not getting exact SP level.
Regards,
SachinI depends on
- what upgrade package you use (SR1, SR2, SR3)
- the SP level of the source system
The upgrade guide tells you the minimum SP level needed to do the upgrade.
If you use the new CD/DVD set, the system will be upgraded to SP 12 (BASIS, ABA, SAP_APPL).
If you backup your wage tables before the upgrade (as described in the installation guide) you can also go to the highes SP level for SAP_HR.
Markus -
Service Pack 2 for Windows Server 2003 broke our online connection to our self-hosted website
We have two office computers with Microsoft Server 2003. On one of these machines, we have hosted our own website for about 10 years. Eveything worked well until yesterday night, when Microsoft upgraded our webhost machine with Service Pack 2. When
it was done, the only noticeable result is that we lost an internet connection to our own website. We had upgraded our other office server with Service Pack 2 a number of years ago, but that had no negative effect on our operations.
Our website, originally created with ASP.Net in Visual Studio 2005, is a relatively simple one, almost all text-based, with a default.htm home page which comes up on any browser, and from which users can use click buttons to move to secondary
pages. Now, following the Service Pack 2 downloading last night, all that shows up on a browser screen when someone seeks our website is a bold-face "FOLDER LISTING../" message.
We under standard there is a program feature that directs a website visitor directly to the home page of that website.
So what is that program feature? Where do we find it? How do we reconstruct it or modify it so that our website default.htm home page appears on the screen?
We intend to upgrade our two office servers to Microsoft Server 2012 within a few months. But we would be most unhappy to be told that we must pay a tech consultant a hefty service charge to restore or repair a vital link that Microsoft's
operating system service pack destroyed, even if inadvertantly.You should be able to configure that on IIS level. See that: http://www.iis.net/configreference/system.webserver/defaultdocument
More if you ask them here: http://forums.iis.net/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
SAP R/3 4.6 B Support pack level for AIX 5.2
Hi,
We have upgraded O.S version from AIX 4.3 to AIX 5.2. Here our environment is SAP R/3 4.6B and DB oracle 8.1.7.
My question: Do we apply any support pack to the system after support pack upgrade. Please find the below support pack level for our current system.
SAP_BASIS 46B 0054 SAPKB46B54
SAP_ABA 46B 0054 SAPKA46B54
SAP_APPL 46B 0054 SAPKH46B54
SAP_HR 46B 0000 -
ST-PI 2005_1_46B 0003 SAPKITLQC3
Please request the feedback.
Thanks & Regards,
Narayana Murthy.Do we apply any support pack to the system after O.S upgrade ?
( Correction for the below posted mail) -
Unable to activate after Service Pack 2 for Microsoft Office 2010 (KB2687455) is deployed
I'm having a very strange issue with deploying the "Service Pack 2 for Microsoft Office 2010 (KB2687455)". Here's what I see:
Deploying to a Windows 7 SP1 system fully patched as of 7/29/2013
Using SCCM 2007 R3
Task Sequence installs Office Professional Plus 2010
Task Sequence installs Service Pack 2 for Microsoft Office 2010 (KB2687455)
The Office Professional Plus 2010 install was configured to use our key using the Office Custimization Tool (setup.exe /admin)
When I try to activate the suite using any of the installed applications (word, excel, outlook or powepoint) I get the error "An unspecified error has occurred. Your request cannot be processed at this time. Please try again later. (0x80070190)"
If I repair the install then try the activation again it works right away. This is a good work around for single installs but for my needs of multiple system deployment and for pushing out the Service Pack 2 for Microsoft Office 2010 (KB2687455) to other systems
in my environment this will not work.
Can anyone please suggest a solution to this problem?
Thank you,Hi
According to my research, this issue occurs when one of the following conditions are true:
If you have CD emulation software installed, a registry key is preventing the hardware ID from being acquired.
A required registry key is not set correctly or is missing.
If you want more detailed information, please refer to the following link:
http://support.microsoft.com/kb/2400124/en-us
Hope it helps
Regards
Maybe you are looking for
-
Post-refresh steps for a CUA child system
Hi, I implemented CUA in our non-prod system. I will copy my DEV system (CUA enabled) to a SBX machine (also CUA enabled). our CUA Master is installed on our Solution Manager machine. I searched the web for possible solutions. One of them is: 1.expor
-
OK, this is driving me crazy and I'm not sure why it's not working like it's supposed to. I recently upgraded to iPhoto 7.0.1, and recently signed up for .mac, mainly because I wanted the Web Galleries. So ... I'm in my iPhoto library, I click on the
-
Where can I download the updated software from?
-
Report Queue Manager - Scheduled Jobs
Question: How/where does the Queue Manager store info for scheduled jobs?
-
Firefox chrashes when i open downloads or start downloading a file
when i start download a file or open downloads inside firefox, firefox freezez and chrashes that happens all the time now, tried reinnstalling it but didnt work. any help?