Upgrade to ECC 6 and workflow issues

Hello,
We have just upgraded to ECC 6 and have some issues with workflows. Each dialog step in the workflows appear in the respective agents inbox, but once they action, the workflow do no proceed further. The log shows that the step did receive the terminating events, but doesnt proceed from there.
Anyone who had similiar issues, can you please let me know how you went about overcoming this ?
Cheers,
Satish

Hi Satish,
Please check the agent assignment for the dialog step task. Also try by setting the task as a general task (if no particulat agents are desired).
Do let me know in case of further queries.
Regards,
Saumya

Similar Messages

Need to find impact of Vertex O series upgrade on ECC and changes required?

Hello experts,
My client is upgrading Vertex series to O from Q.
As part of Q series, additional fields such street will be used to identify correct tax jurisdiction code in system.
Also, zip code used will be 9 digits (zip+4) instead of 5 digits.
We need to correct existing master data and open transactions in system with new jurisdiction code along with supporting new data in system.
Below are the questions:
1. What changes are required in ECC side to support new vertex series in interface etc?
2. How can we achieve integration of vertex O series with new master and transnational data getting created in system to have right TXJCD value?
3. What all possible solutions are available to correct master data and transnational data in system with correct TXJCD value?
Any pointers to experience with Vertex will be rewarded.
Thank you,
Gouri.

Hi,
> 1. is there any dependency for the remaining systems in the landscape (SRM 5.0 SPS15, NW 7.0 SPS18, PI 7.1 SPS8, >SOLMAN EHP01 SPS22)?
As such there is no dependency between component you specified but SAP always says to be on latest patches. As far as solution manager is concerned you should have minimum support pack level Solman 7.0 SP17 but anyway you are more than that.
> 2. we are using AIX Version 5.3 and "DB2 v9.5.0.2", does it support ECC 6.0 EHP04 or do I need to upgrade?..
It is fine with your upgrade.
> 3. Java version for NW 7.0 is as follows:
> java version "1.4.2"
> Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
> Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20080122 (SR10) (JIT enabled: jitc))
> Does it support my requirement or any upgrade is required?
>
Java version is also fine.
Thanks
Sunny

Upgraded to TimeCapsule and now issues with AirPrint from iPhone and iPad

Okay. I bought a HP 210a air print printer. It was working great with my Linksys router and my iPad and iPhone worked with it perfectly. Since that time I have recently bought a new new 2TB Time Capsule and just recently set it up. The old router is no longer hooked up. Since switching over to the new router, nothing prints from the iPhone or iPad. So here are the details and I am hoping I am just missing a step:
1. I think it is important to point this part out. After setting up the new router, and before discovering any of this, I turned on the HP printer. Upon doing so, the printer informed me a software update was available from HP so I downloaded it and it appeared everything was fine.
2. After the update, I tried printing and nothing. Duh, the printer was still looking for the old router. I ran the built in HP wireless setup wizard on the printer and it pointed to the new router fine. I tested the connection using the test feature on the printer, and it printed a report that all was fine and that it was now pointed at the Time Capsule, great signal, etc...
3. I went to my iPhone and iPad, made sure they were pointed at the same network as the printer, and once again the printer appeared on each device as an AirPrint printer. Great I thought, so printed a test a page from each device. Both pages printed. Now here is where it gets weird.
4. I tried to print a second document from the iPad and iPhone, nothing. I tried a picture. Nothing. It still shows eveything setup correctly, the HP shows as the AirPrint printer and connected, but no matter what I do, it nothing is printing from either device. I've tried resetting my network settings on the iPhone and iPad and pointing to the network again, re-running the HP setup Wizard on the printer. They all show that everything is fine. The iPhone and iPad connect to the network fine, both show the printer when I go to print. However, after I hit the "print" button on either device, it shows like the document is being sent but NOTHING happens on the HP. It is very frustrating.
The WiFi is working fine, I can surf, email, etc... so the router is working properly. So what am I missing? Could the HP update somehow have caused the problem? I have to believe that between the update and the new router that somewhere I am missing a step. Any help is greatly appreciated.

If that doesn't work, try power cycling your router, printer, and your iPad/iPhone in that order. To do this, follow these steps:
Unplug the router and printer from the power and shut off the i-devices. Let them sit for about 30 seconds and then plug just the router in.
Once the router is completely back online (usually takes about 30-60 seconds) plug the printer in. Wait until it is back on its home screen.
Turn the i-devices on.
Try to print again.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

DNG Embedded and Workflow Issue

If I embed my original NEF file into the DNG conversion via Lightroom, is there any issues as far as processing time in Lightroom (since the file size will be more than doubled)? On another note, is there a processing delay in Photoshop CS3 also?
I was considering embedding my original NEF within the DNG in Lightroom, but now I am swaying...I am thinking of just converting the NEF files to DNG then pitching the NEF files. Any suggestions or comments? Thank you in advance.

It is a personal choice. I shoot Nikon gear, and I do not turf my NEFS, nor do I use dng personally--though I do convert a goodly number for clients, but only after developing the NEFs.
I am keeping my NEFs while I wait for NX to remove the Three Toed Sloth it uses for an engine and replace it with a Cheetah--pardon the absurdity :) I'll be 200 years old by the time NX is competitive.
Seriously, I use apps that will not do dng at this time but do a superb job on NEFs. DNG is simply not universal by any means, and I seriously doubt it ever will be--but who knows?
So, I do not work with DNGs directly, other than tweaking the odd one for a client ( I archive all client work ).
There could be a problem, but I have not tested it. Since LR loads from the RAW (DNG) file into develop and has to make that image on the fly (that is what is happening as you watch the 'loading' indication when opening in Develop), the much larger file size MIGHT slow it down even further--and it is slow enough at doing that as it is!
Try it and see.
A better solution might be to simply convert to dng, then save the NEFs in an archive offline. That saves much space for a start. As long as you leave the original alphanumeric name of the NEFs (appending any other names you want) in both the dngs and the corresponding nefs, you can always locate the any nef easily if you need it.

LSMW problem since upgrade to ECC

Not sure if this is posted in the correct place, so apologies in advance if it is...
We have an LSMW object which uploads customer master data onto the system (account group 0005). This has works for years, but we have since upgraded to ECC and now the partner function part does not seem to be working.
We load up a PE partner function and a number to go into RF02D-KTONR. This gets picked up correctly from the file into the position screen 2324 but it then doesn't get put into the field on screen 324. This just gets left as 0 so when the batch input session is run they all error with the Message No. F2613 Number '0' is not defined.
I have searched on OSS notes but I can't seem to find anything, does anyone have any ideas?
Kind Regards
Carly

I logged this problem with OSS and there was a combination of things that we did to make this work...and we are not really sure what change actually helped the situation.
We ran progam RFBIDEG0
We also changed config in the following:
IMG >> SD >> Basic Function >> Partner Determination >>
Setup Partner Determination >> Customer Master >>
Account Groups - Function Assignment
adding PE & 0005 as we were having problems with prospects customers...
I'm not 100% sure what else was done as OSS were logged onto our system for a while trying to solve the issue...
Hope this helps
Regards
Carly

Workflow issue after upgrade to ECC 6.0

Hi,
we are facing an workflow issue and thought if someone has faced similar issue and could help us.
We've an approval workflow for purchase requisitions through release strategies. For some steps, if the approver is 'WF-BATCH' user, we are executing that step using a program. This program first set the workitem to completed status( this part is working), then it will close the purchase requisition to release status for a particular release code( this part is working) and then we are triggering the 'RELEASE' event for the business object providing the Object key which should take it to the next step( THIS IS NOT WORKING). The business object is custom. This was working perfectly in 4.7 version of SAP but this logic is not working in ECC6.0. we are using SAP_WAPI_CREATE_EVENT to trigger the event. But the workflow doesn't move on to next step.
Have anyone of you have any idea as why this might be happening. Any information on this would be of great help.
This is happening in ECC 6.0. USED TO WORK IN EARLIER VERSION.
Regards,
Sam K

Hi,
Is WF-BATCH having proper auth. ?
Or, if you are using the FM SAP_WAPI_CREATE_EVENT in some program and is scheduled as a batch job, then that user under which this batch job is runnign should have proper auth. to raise the event. Please check those.
Also, what the error (if any) says in SWEL ?
venu

Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]

Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein

Upgraded to yosemite and now having password issues and slow start up

I have upgraded my macbook pro to the OS X Yosemite operating system and now encountering start up and password issues.
Previously on start up my system would go to the log on icon within 10 to 15 seconds of pushing the on button. Now there is horizontal loading indicator bar appearing and takes about 30seconds to 1 minute to go away before getting to the log on screen and if I click on my icon the system goes live on screen without having to put in a password which is an obvious security issue.
I have tried adding a password however each time I try to put my old password in it tells me it is the wrong one.
I am operating Yosemite 10.10.2 on a macbook pro with 8gb memory with i7 processor..
The computer was running perfectly ok before this up grade so I had resisted previous prompts to upgrade due to the bad press this system was getting last year. I thought Apple would have had this all sorted by now??
I would appreciate any help if anyone knows how to resolve these issues.

Install the version of Java they want from here: Java for OS X 2014-001
See if CS 5.1 launches.
If not reinstall CS5.1 and any updates.
Gene

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

Workflow ECC User name Issue

Hi ! Work flow Experts!
I am triggering work flow from crm to ECC vise versa,I am unable to get Initiator User name it shows only CRM user name (RFC USER).
I want to get ECC server User names in CRM. I am running an remote function module from ECC to CRM, so i am getting only CRM user name,could any body advice me how to get an ECC server user names Its Urgent.
Regards and Thank you In Advance,
Raghava.V

Since the workflow is initiated from CRM initiator will always be the one in CRM (crm user name).
To get ECC server user name in CRM you will have to use rfc to fetch data from ecc and get it in CRM. Initiator for for one workflow will always be one, if you want another agent then capture the name and create another conatiner element and use it.
THanks,
Shweta

Impacts on MRS and MAM during upgradation from ECC 5.0 to 6.0

Hi Gurus,
I would like to know the impacts on MRS and MAM during the upgradation from ECC 5.0 to 6.0. The version of MRS we are using is MRSS 500, and the version of MAM is 3.0. please let me know your valuable comments.
Thanks in advance.
Regards
Satish

HELLO,
Search the form you will get few links.
Also many companies have gone technical upgradation , but not functional upgradation.
Thanks
RK

Issues on Sources System ECC and BI

Dear Friends,
I m trying to get datas (extractions) from ECC 6.0 QA 110 to BI DEV 100. But I only have the Source System to the ECC 6.0 DEV without any data, this connections is working very well. I asked the Basis Consultant to do another connection of the BI DEV 100 with the ECC 6.0 QA 110 using RFC connections with Bitemote with sapall, between ECC and BI. He already did it and I can see at SPRO under SAP NetWeaver > SAP BIW > Links to Other Systems > General Connection Setting > Assign Logical System to Client, on both sides in BI and ECC. The question is, do I need to do Any configuration at the BI side to active (create?) this new Source System ECC 6.0 QA 110? I hope Im clear. Thanks in advance.
Antony

Hi Frank,
I can't imagine any issues compared to other installations. The only thing you need to take care about is that in BI you can only work in one client and in your ecc system you can have multiple clients to work in. These will be treaten as different source systems for your bw.
regards
Siggi

Upgrade from ECC 6.0 EHP5 to EHP7 issue with PO header

HI Experts,
We Upgrade the Ecc 6.0 recently from EHP 5 To EHP 7. In EHP 5 when we select the PO type (REW - Reject ) in ME21N , Reject tab will appear at header level.
In EHP 7 When we enter the PO type (REW - Reject ) in ME21N ,Reject tab will not appearing and it is asking for the organisation elements and vendor .After entering the all the organisation data only reject tab appear in header level.
My client wants EHP 5 Functionality in EHP 7.What clould be the reason to behave like this.How to achive this requirement.
Regards,
Venkat.

Hi Krishna Rao,
It is proved lot of times if you are upgraded new enhancement package in the server then enhancements need to re-check and do manually development in new server and retesting in quality server before moving to Production server.
Ask Abaper to check whether enhancement updated in new enhanced server . If no then Abaper need to update manually.
Regards,
Ravindra

Workflow issue in HR Process and Forms

Hi Experts,
I am new to HR process and Forms.
I am facing workflow issue in "change of position" process.
The process is not going from manager to HR admin.
Can anybody help me out on this.
Thanks in advance
Regards
Rahul

Hi Sahir,
Thanks for your quick response.
I checked in swi1 but it is showing "no entry exists"
I have done all basic settings using PFTC and OOCU_RESP tcode but still it is not working.
is there any other customizing that is needful??
Regards
Rahul

Upgrades for CS6 and Lightroom 4 issues...

I bought both upgrades for CS6 and Lightroom 4. I downloaded the upgrades on my MAC desktop computer. Everything was fine. When I searched for them in applicatins, it showed both CS5 and CS6 and the same for Lightroom 3 and Lightroom 4. Should I delete CS5 and Lightroom 3? Thanks in advance.

Feel free to remove the older versions if you are reasonably sure you have migrated all your files and have no technical issues. Just make sure to run the proper uninstallers, not just trash the apps. Also be warned that you may need to reinstall LR4 and CS6 to fix broken file associations and shared components like Bridge...
Mylenium

Upgrade to ECC 6 and workflow issues

Similar Messages

Maybe you are looking for