Upgrade to Mavericks make Eduroam (WPA Enterprise) intermittent wifi

After upgrade to Mavericks, my MacBook Pro can't stay connected to eduroam for at leas 2 min following, it's always falling.. Any help, and after update to 10.9.2 the stability have dropped considerably..
Any help please..

You're not alone. I have exactly the same wifi problem since the update to 10.9.2. I can't connect to eduroam or to my university wifi (WPA2 Enterprise). I have no IP adress assigned ! At the same time, I have no problem with my PC with Windows Seven ! I have the same problem with my iPhone (ios 7.0.6).
At home, my wifi is WPA2 Personnal and I have no problem nor with my Macbook, nor with my iPhone.
Thanks for your help.

Similar Messages

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
https://app.box.com/s/fe7v7h7kywjr23spumqp

I upgraded to Mavericks and automatic updates disabled printer wifi connection

I upgraded to Mavericks and purchased new HP OfficeJet Pro 8100 printer with wireless connection. Has been working fine until today my system downloaded a bunch of upgrades automatically: I didn't know how to stop the automatic downloads (I was accustomed to deciding which ones I wanted in SnowLeopard!) but it downloaded all of them and I don't know which ones to trash and I REALLY DON'T KNOW HOW TO DISINSTALL ANY OF THEM! I am really in a quandary and about to throw the new printer and anyone else I can find out the window~
Here is list of automatic downloads:
OS X NTP Security Update; Security Update 2014-005v. 1.0; Safari v.7.1.2./ Remote Desktop Client Update v.3.7.1/ OS X Update Combined 10.9.5/ iTunes v. 12.0.1/ iBooks Update v. 1.0.1/ HP Printer Software v.3
Now the printer won't connect to Wifi (nor with USB cable)... It was working fine yesterday. I read that some updates block connections but have no idea what to do now???
HELP
Rose

Have you tried removing the HP from Printers & Scanners and then adding it back again to see if this will let you print?
You could also try a reset of the printing system. Note that this action will remove all devices from the Printers & Scanners preference pane thus requiring you to add them back again. To reset, open Printers & Scanners and right click in the section where your printers are listed, A small pop-up menu will appear. Select it and confirm that you want to reset and then enter your admin password when prompted.

Wifi problem with Mac after upgrade to Mavericks

I just upgraded to Mavericks but something wrong with my wifi.
i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
i tried connect to hotspot with my iphone5s and it works.
Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
In conclusion,
Airport should be fine because my other devices works.
Mac wifi should be fine too because i can connect using hotspot.
so why it's not working when i connect Mac to Airport?

I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila! It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
Good luck.

WPA-Enterprise WIFI dropping after IOS 6 Upgrade

We use WPA-Enterprise authentication for our WIFI and since upgrading to IOS 6 the connection needs to be reautenticated everytime the iPad is unlocked. This is a major inconveience. With IOS 5 you only autenticated one time and whenever you unlocked your iPad you were already connected.
These are the required settings which IOS 6 still automatically navigates, but it doesn't maintain the login name and password (which autheticates to a RADIUS server):
Network Authentication: WPA-Enterprise
Data Encryption: AES or TKIP
EAP method: PEAP
Inner EAP method: MS-CHAP v2
Check Use Windows user name and password
Uncheck Validate Server certificate

It is forgetting the network everytime the iPad sleeps - even when it doesn't require an unlock passwod.

2007 iMac, upgraded to Mavericks, second monitor now intermittently blinking

2.4 Ghz Core 2 Duo, 4 GB Ram. ATI Radeon HD 2600 Pro graphics.
Upgraded from Snow Leopard here at work, running dual monitors via DVI cable. Never a problem previously.
Upgraded to Mavericks. Enjoying it. Until the 2nd monitor (Acer v223w) started intermittently blinking.
Kinda befuddled. Can't find any answers. Any help?

Same issue here and its really killing me.
When I disconnect the second monitor from the iMac and plug it back in, the blinking stops for a little while. But then it starts up again.
It seems to blink more when I'm using Chrome (latest version 30.x) with multiple browser windows accross both displays.
iMac 20-inch Early 2008
ATI Radeon HD 2600 Pro 256 MB
Mavericks 10.9
Second monitor HP w2207 connected with DVI cable and adapter.
Under Mission Control system preferences, I have Displays have separate Spaces unchecked, disabling the new Multiple Displays Mavericks feature.
Hope that hleps.

I upgraded to mavericks and I cannot make text or images bigger with the trackpad. It only zooms in the document. How to change that?

I upgraded to mavericks and I cannot make text or images bigger with the trackpad. It only zooms in the document. How to change that?

Hi Rohit,
If you have questions about the Accessibility features of Mavericks, you may find the following article helpful:
OS X Mavericks: Use accessibility features
http://support.apple.com/kb/PH14322
Regards,
- Brenden

How do I get iTunes to show up so I can make playlists and burn CD's as I was able to do in MAC OS X Snow Leopard? I upgraded to MAVERICKS so that I could have iCloud capabilities.

How do I get iTunes to show up so I can make playlists and burn CD's as I was able to do in MAC OS X Snow Leopard? I upgraded to MAVERICKS so that I could have iCloud capabilities.

Hi ...
Help here > iTunes 11 for Mac: Create a playlist

After I had upgraded to Mavericks I can't make a Windows partition with Windows XP.

I'm trying to make a Windows partition. I have before but I recently had to have my computer re-formatted and all of it wiped. I have the Windows XP disk and everything and I've had it before, it was only after I upgraded to Mavericks it didn't work. It says I have to use a Windows 8 DVD or usb port which I don't have either of.

You need to do that from Mac OS X 10.6.8 or earlier, or use a product such as VirtualBox, Parallels Desktop, or VMware Fusion instead.
(100694)

Since upgrading to Mavericks I can't click and drag or unlock to make changes.

As the title says, I upgraded to Mavericks, and since then, I haven't been able to click and drag anything from my desktop / finder etc. I can however drag windows around. I've check in the accessabiltiies options for the drag locking and that is set how it should be, but still hasn't fixed anythi
I also read that people had similar problems and tried a few of the fixes like force it to sleep and wake up. That didn't work, I also was going to make a new user, however it appears I am unable to unlock the lock in the bottom left. It blinks but doesnt unlock to make changes
Anyone have any similar issues? I'd appreciate any help

I just got a new rMBP with Mavericks pre-installed (unfortunately) and this is my first day using it. I've had this same issue. The only thing that solved it was to restart finder by using an automator that showed (and hid) hidden files.
I actually clicked the automator so I could easily drill down to the plist files so I could try deleting my old ones, but as soon as my desktop (and finder windows) came back up, I was able to click and drag again! I assume it was because I restarted the process that runs finder.
This is obviously a bug in the OS somewhere, but at least this was a very quick fix to the issue for me. (Even if it's one I'll have to keep using as I have the problem resurface).

After upgrading to Mavericks I cannot update iPhoto and iMovie. Why?

Just got my first Mac, an iMac. I upgraded to Maverick and once done I find there are updates available for iPhoto and iMovie. First I have tried to register "accept" the two apps. Nothing happens. Then I try to update them and get the answer that these apps was installed with another Apple ID. The thing is that I don't have any other Apple ID and noone else has touched my iMac. I have tried to reinstall Maverick three times now but end up with the same result. Anyone who has any clue or have experienced the same problem?

Open System Preferences > Users & Groups then select the Password tab.
Make sure you see the correct Apple ID.
If not, click Change.
Make sure you are logged into your admin account before updating apps.
Reinstalling Mavericks requires using OS X Recovery but there's no reason to reinstall Mavericks just to update your apps.
Message was edited by: CS

Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

Try Image Capture, which comes with your Mac. It should be in the Applications folder, or if not, try the Applications/Utilities folder. It should automatically find the right Epson driver for your scanner.
Also, I'm guessing you have Epson 630 rather than 360. If so, see this from Epson Website.
The latest printer and scanner drivers for this product are available from Apple's Software Update. Here's how to get them:
Do one of the following:
USB
Connect your product to your Mac using a USB cable and make sure the product is turned on.
Wireless
Connect your product to your router wirelessly and make sure the product is turned on.
Note: You'll need to use the product's control panel to establish the connection to your router.
Ethernet
Connect your product to your Mac using an Ethernet cable and make sure the product is turned on.
Select the menu on your Mac, then Software Update.
Do one of the following:
If you see an update from Epson, select UPDATE to install it.
Note: Apple Software Update may find multiple updates for your system. You may choose to install all or some of the updates.If an update is not available, you're done. You already have the latest drivers from Apple.
Note: You can also use EPSON Scan if it's available for your product. To get it, go to the Epson main support page, select your product, then select Drivers & Downloads. Select Drivers, then Scanner Driver and EPSON Scan Utility.
For more information on scanning in OS X, see our Image Capture FAQ.

Mail Signatures, Folder Organization, Notification and Attachments not working the same since upgrade to Mavericks

Hi All,
Normally very quick to do so, I’ve been hesitant to upgrade to Mavericks based on so many issues being reported with Mail + Gmail.
Previously Apple released a fix for these issues and I still waited a while. This weekend I upgraded to Mavericks and Mail is definitely not working as I’d expect it.
Some of the things I notice include:
1) My saved mail folders, previously in alphabetical order, are now in reverse alphabetical order and dragging them to be in a different order has no effect
2) Previously when I clicked on a message and pressed Message > Remove Attachments the message would reappear in my inbox within a second or two, without the attachment. Now, the message simply disappears.
3) The little red icon no longer appears in the dock when a new message arrives
4) For my various accounts, signatures do not appear/disappear as I select a different From account (each of my accounts has different signatures).
Does anyone have thoughts on any of these items?
Thanks,

Not an answer, but a repeat ...
I too have problem (2) -- Remove Attachment now makes the email in question disappear (in fact moving it to Archive).
Help would be appreciated.
(Have just moved from Lion to Mavericks.)

I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge. Did not have trouble until I upgraded to mavericks. I have a mac book pro, 10.9.1, iMovie 10.0.2. Says it is recording, but when I go to check, it says the file is empty.

I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?

Hey, Clinton,
     Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
     1. Open iMovie 9 (finder/applications/iMovie 9.0.9
     2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
     3. Close iMovie 9
     4. Open iMovie 10 (probably in the dock)
     5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
     6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me!

Using VPN to access remote servers; copying files to desktop since "upgrading" to Mavericks no longer works. Can anyone help please?

Hi everyone,
I work remotely using Cisco AnyConnect (company provided) to access the company servers. Until "upgrading" to Mavericks I was able to copy files directly to my desktop – from either the servers themselves, from within Bridge, and/or by using the finder - you get the idea. Now I can only copy the files by opening them while still on the server using the native app (in my case mainly InDesign/Photoshop/Illustrator files) and saving them to my desktop that way.
I'm a designer, I use a lot of files for my specific job every day and these files are often pretty large and doing it this way is time-consuming and really frustrating seeing as I had no such issues with the previous OS. It's not a total nightmare (yet) like some of things some of you are dealing with but I've spent more time restarting, freezing and trying to fix issues than I have actually using my darned machine. I have no choice but to access my work this way; I'm part of a much larger team and we all work on these files off and on during the day so I'm constantly needing to copy files and make sure I'm working on the most current version. Working off the server isn't an option as the speed decreases considerably... making the slightest task cringingly slow. As in 25 minutes for a PDF to be created slow.
I've been used to my system running smoothly, without issues and fast so this upgrade is turning into a bit of a nightmare. Before I throw in the towel and try and downgrade, does anyone have any ideas? My technical knowledge where these things are concerned isn't beginner but I'm no expert and I'm stumped. I just don't know where to start and I'm afraid of screwing something else up during the process of trying to fix this (so far) one issue and creating a snowball effect.
I'm using a 27" iMac (late model 2012 purchased in March 2013) with a second Viewsonic monitor attached. I have a Cintiq 22HD hooked up (but not on all the time) and a Wacom tablet in use. I currently use both CS5 (work hasn't upgraded to CC yet) and Adobe CC (for personal use) on my system.
Any help/ideas would be greatly appreciated!
Thanks!
G.

Hi,
By default, the Remote Desktop (RD) Gateway component that encapsulates RDP in HTTPS packets listens on port 443 (for TCP) and port 3391 (for UDP). After you changed the ports in Transport Settings tab, please make sure that you have opened the custom ports
you selected in Windows Firewall.
In addition, since you have mentioned the registry key, would you please share the entire path?
It seems that you need to manually update the gateway in the RDP file with the port. Have you created an .rdp file? You can also refer to the link below:
Create an .rdp file
Best regards,
Susie

Upgrade to Mavericks make Eduroam (WPA Enterprise) intermittent wifi

Similar Messages

Maybe you are looking for