Upgraded to GTX 750 ti - Will not boot

I have a ENVY 700-209
I've just swapped out the graphics card and added a gtx 750 ti
The computer will not boot and goes to automatic repair.
I've also added a blu ray drive.
This question was solved.
View Solution.

The HP 700-209 has win8. It operates under strict UEFI BIOS control called Secure Boot. It protects the computer. Call the manufacturer of that card to determine if the card operates under UEFI or legacy BIOS. After that, you'll have to disable secure boot and then deal with the "legacy" issue.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

How do I uninstall Yosemite please ? Since I upgraded my 2011 MacBook Pro will not boot up

My 2011 MacBook Pro will not boot up following my upgrade to Yosemite. How do I uninstall or downgrade back to the previous version of OS please ?

You can't downgrade or uninstall unless you first erase the drive. Try the following:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Trying to upgrade to 10.4 - Problems will not boot now

Hi,
I tried upgrading to 10.4 the other day. Currently my iMac is running 10.3.9.
When I tried upgrading, it would start the install and than freeze and wouldn't go any further. After several attempts I ran the Tech Tools CD i got with my computer. It said I had a problem with the Volume Structure. So I click the fix button and I assumed it was fixed and it continued to check everything else ok.
When I restarted the computer it would not boot into the operating system. It freezes on the gray screen with the loading bar. Left it alone for about an hour and it was still there. The only way I can boot it up now is with the Tech Tools CD.
Any ideas what happened or what I should do?
Thanks in advance.
Mike A.

Hi Mike:
I feel for you. I just went through a similar ordeal with a G4 (look here for details).
I think at this stage your problem is that you don't have a complete system installed. At least I was able to remove the hard drive and move it to another computer to get Tiger installed on it.
You could try cleaning your Panther CDs and trying again, but I suspect the source of your problem lies elsewhere: the logic board. If ds store is correct, and the firmware did get hosed during the upgrade, then we're both looking at expensive repair bills to get it fixed.
I'd also try removing all but the original (256MB) RAM, zapping the PRAM, and resetting NVRAM. It can't do any harm, and you might get lucky. You can replace the RAM once you get a system installed.
Andrew
14" G3 iBook (700 MHz, 384MB RAM) Mac OS X (10.3.9)

Sonnet Encore Zif G4 Installed but will not boot.

I am back and feel like the frustrated enator. I called tech support at sonnet and got the upgrade installed but B&W will not boot.
I checked Sonnet tech page and I have no PCI cards installed and the hard drive that was attached out. However I can not get the power plug that was attached to it off could this be the problem. If so how does one pull it off?
I also read some place may have been a post at site the some 256 ram may not be compatable with up-grade. I have 4 sticks of pc 133 non ecc in the B&W. Problem?
I replaced them with 4 sticks of 64 ram pc 100 but still would not boot. Old ram that is untested.<

After doing the firmware upgrade on the G3 some memory that worked before the upgrade will either not work or will not be fully seen. I had a couple of 128M sticks in my g3 that only showed up as 64M after the firmware upgrade, and one 256 pc133 that did not work at all.
I seems you are trying to do three things at once: firmware upgrade, cpu upgrade, and memory upgrade. Doing all at once without confirming the success of each install makes troubleshoting your problem difficult.
Go back to ONE.
- take out the G4 upgrade
- put the original G3 cpu
- remove all but one stick of memory
- boot into OS9 with the one stick
-if no-boot then remove that stick, try another...
- confirm that the G4 firmware patch has been properly installed (do it again)
(even if you can not disconnect the power supply line from the PCI card thats fine as long as the card is not in the slot)
-after booting with one stick, reboot and add ONE stick of memory , confirm memory in System Profile. Continue untill you have all your memory confirmed and working in OS9
-once you have all of your installed memory working in OS9 boot into OSX, confirm the memory in System Profiler.
-if no boot in OSX remove all but one stick, try that.
-if one stick works, take it out and set it aside, try another, test each individually.
-install all the working sticks you have
-recheck that all the memory appears in System Profiler
-Now reinstall the G4 upgrade with just one confirmed working memory stick in.
-If that works put in one stick at a time and reboot, checking for the memory in System profiler each time.
If this works you should have a happy mac. If not you will be able to report back with exactly where problem is.
I know this is a lot of rebooting but IF you have a bad memory stick it is the only way to find it, and you have to ensure that all the memory is osx compatible before trying to install a cpu upgrade.

G4 Will not Boot Up after Quick Time 7.1.6 Upgrade

I upgraded the most recent Quicktime update last night and opted for System Shutdown afterward. This morning the machine will not boot up. It goes to the Apple and the swirling circle for up to a half hour - still no luck.
Any ideas?
iMac G4 Mac OS X (10.4.9)

Are you sure it was just the QT update? Security Update version 1.0 came out about the same time. It has since been pulled and replaced with version 1.1 following some users experiencing issues (although 1.0 worked fine for me).
Try booting into "Safe Mode" (hold down Shift during start-up) and see if it will allow you to run Software Update again.
Failing that Barry's suggestion of an A & I will undoubtedly do the trick.
mrtotes

Satellite M40x will not boot up after CPU upgrade test

I have an M40x Laptop. I took the CPU out of it to replace it with another to test the computer booted up fine so I shut down and took it out and put it's original CPU back in, and it would not boot. Now it will not boot up at all with either of the CPU's all. When I turn on the power all I get is a white screen for a few seconds and the laptop shuts itself back down. Both the CPU's are good because I have since tested them in other computers to make sure that was not the problem.
Anyone have any ideas on what is causing this??

Im not surprised.
As far as I know Toshiba does not support any CPU upgrades and it's not advisable to do something like that.
Its a fact that the CPU replacement on the notebooks is not easy and mostly not recommended.
The processors used in portables are connected to the system board using a process called TCP (Tape Carrier Package). This is a permanent connection method and is used in the interests of miniaturization and heat dissipation.
Did you assign the new heat paste? Its necessary and important if you want to connect the CPU again.
So possibly this is a reason for the no booting.
I think more details you will get from the service guys in your country

HT4718 I recently upgrade my OS and now my MacBook Pro will not boot up

I recently upgrade my OS and now my MacBook Pro will not boot up

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?, I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?

I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,

Try starting in safe mode:
Ciao.

White iMac will not boot after 10.6.8 upgrade

I downloaded the 10.6.8 upgrade last night. This morning, the white plastic iMac will not boot.
I have tried evey known keyboard option.
I have tried booting from the snow leopard dvd.
I have zapped the pram.
Nothing!
Please, any help would be great.

We bought 2 iMac's 27inch with i7 Quad-core. Did the update a couple of hours ago. My Mac asked to reboot after update, but i didn't accept and worked with iTunes for a while. Then rebooted manually. After reboot it took about 15 minutes to reboot (light-blue screen with nothing on it, not even a mouse). My Wife also did the update of 10.6.8 and rebooted when asked. Her iMac also took 15 minutes to reboot, bus update was unsuccesful! So did update again and then denied reboot and rebooted manually! (Apple-logo and then choose "restart").
When we did that, iMac was very fast and updateproblem was solved! So deny reboot and reboot manually and problems are over. Same deal with 2 brandnew iMac. I'm guessing this is an issue. To much of a coincidence for me!

After 10.5 upgrade Mac will not boot from hard drive

I just upgraded to 10.5 Leopard but my mac will not boot from the hard drive even after selecting my hard drive as the startup disk. The mac will start to boot but will cut itself off before the boot is complete. I have to leave the Leopard disk in the mac and hold down C to get the mac to turn on but it only allows me to install the software again.

instead of archive and install you might first want to try restoring your system using TM to some time point before your failed 10.5.1 upgrade. Then try upgrading to 10.5.1 again. I would suggest downloading the full 110 MB upgrade and installing it manually rather than doing it through the software upgrade menu.
You can download the upgrade here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1051update.html

Satellite A665-S6050 Windows 7 Home Premium Memory Upgrade will not boot

Hope there might be a clue to assist.
Checked Toshiba support for recommended memory to upgrade from 2X2GB to 2X4GB. Ordered Kingston KTT-S3BS/4G x 2 as recommended. BIOS recognizes the memory, but Windows will not boot. Tried Safe Mode and hangs after a few seconds. Tried Repair Computer, also hangs after a few seconds. Put original memory back in and it boots fine. There was a brief flash of a blue screen once, but no dump file to be found.
To me it seems as ifthe issue is Windows, but I do not know enough about this to say definitively. Just based on the percieved behavior when Windows trys to boot (hanging).
Any ideas appreciated before I go through return and try something else.
Thanks.
Toshiba Satellite A665-S6050
Windows 7 Home Premium 64 bit

he ordered from Toshiba and there memory did not work ... the kit he ordered was the one recommended for his laptop from Toshiba and ordered from Toshiba
Yes he did. But he ordered the Kingston memory that Toshiba recommended as he said...
Checked Toshiba support for recommended memory to upgrade from 2X2GB to 2X4GB. Ordered Kingston KTT-S3BS/4G x 2 as recommended. ... I tried both of the Kingston modules recommended and neither worked.
I'm suggesting that he try the Toshiba part number (PA3677U-1M4G) suggested in the spec, which is made by Axiom.
-Jerry

HT4528 was upgrading to ios6 and phone dead will not boot. what can i do

upgrade iphone 4 to ios6 and phone will not boot up screen dark what can i do?

If you have problems with updating then best is to download the full version and uninstall the currently installed version.<br />
You may need to remove the Firefox program folder to do a clean install of the new version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Windows will not boot GTX 770

Hi there,
I recently bought new MSI gtx 770 lighting edition LE. When i choose in uefi as a primary gpu - PCIe, windows will not boot, and after few seconds screen goes black. If i go with primary gpu as integrated in processor i am ok to boot even i can play on monitor connected to GTX770. When i ran passmark benchmark, i get for VGA 3600 points, againt average 6300. Is there something wrong ? Thank you. Motherboard Asus sabertooth z77, cpu i53470k. PSU 600W, 8GB ram...

Silly questions as this should be a no-brainer, but have you installed specific drivers for the 770 from the geforce website?

While upgrading my 3,2 8 core power Mac , it will not boot. Going from 10.8.3 to 10.8.4. There is no visible video after chime. I need to get up and running ASAP. Could the video drivers have not loaded. Please help and thank you. Ps. Main drive ssd.

The Mac will not boot to a cd, Mac or disk warrior.
It will run for 10 minutes with no video, then shut itself down.
I've attempted Cd boot, zapping Pram, safe mode,
My new Dell monitor power light pulses as if no video is present
Wondering if the vid. driver did not load during update?
Can't seem to light one pixel, no matter what.
Thanks.
Mac Pro 8 core 32 gigs ram gtx285 card
512GB ssd. 3 other slots 1,5 TB seagates.
Thanks for reading and responding

Update on this issue. I replaced the video card with an old one that I had and it boots fine.
Question, if a driver were missing from the update process, would I see anything on the screen at all. I had pure black as if no signal was carried to the monitor. I'm trying to rule out hardware failure, as this card is 1.5 years old.
thanks!!!

MBP15 1.83 GHz Will Not Boot With 3GB Upgrade

I'm trying to increase my MBP's ram to the 3GB limit. This is a 1.83 GHz 15" model.
It will not boot with 2GB & 1GB sticks of identical mfg & specs. It will boot with one or the other...
Any ideas?
Thanks,
Stradioti

Hi
according to the Apple specs for the 1.83GHz mbp's - 2Gig of memory is the limit......
512MB (single SODIMM) of PC2-5300 (667MHz) DDR2 memory on 1.83GHz configuration; and 1GB (single SODIMM) on 2.0GHz configuration; two SODIMM slots support up to 2GB
Crucial Memory says the same.

Upgraded to GTX 750 ti - Will not boot

Similar Messages

Maybe you are looking for